Professional Documents
Culture Documents
Name of Guide
Designation of guide
October 2021
Department of Mechanical Engineering
B. M. S. COLLEGE OF ENGINEERING
Bull Temple Road, Basavanagudi, Bengaluru - 560 019
Certificate
Certified that the mini project work entitled ’Title of Project work’ is a bonafide record
of workdone carried out by
Name of the Student USN
Name of the Student USN
Name of the Student USN
Name of the Student USN
in partial fulfilment of the requirements for the degree of Bachelor of Engineering in
Mechanical Engineering of the Visvesvaraya Technological University, Belagavi, during
the year 2020 – 21. It is certified that all corrections/suggestions indicated during the
internal assessments have been incorporated.
Signature of Principal
(Dr. B. V. Ravishankar)
2.
Declaration
We, hereby declare that the mini project work entitled ’Title of the Project’ has been
carried out by us under the guidance of Name of the Guide, Designation, Department of
Mechanical Engineering, B. M. S. College of Engineering, Bengaluru, and Mr. Name of
External Guide, Designation, Department, Industry, Place, in partial fulfilment of the
requirements for the degree of Bachelor of Engineering in Mechanical Engineering of
Visvesvaraya Technological University, Belagavi.
We further declare that we have not submitted this report either in part or in full to
any other university for the award of any degree/diploma.
Place: Date:
Acknowledgement
This work would not have been possible without the support and the facilities of the
Department of Mechanical Engineering, B. M. S. College of Engineering, Bengaluru as
well as the comments and suggestions from the committee members of project work
evaluation.
We are especially indebted to our guide and mentor Dr. G. Saravanakumar,
Associate Professor, Department of Mechanical Engineering, B. M. S. College of En-
gineering, Bengaluru, who have been supportive and instrumental in completing the
academic goals in time.
We are grateful to our Mr. Name, Designation of Guide, Department, Name of
Company, Place of Project Work, with whom we had the pleasure to work and complete
this project work.
We would like to express our sincere gratitude to the mini project coordinator, Dr.
G. Saravanakumar, Associate Professor, Department of Mechanical Engineer- ing,
BMSCE, for the help rendered in learning the art of publishing.
We would like to thank our Head of the Department, Dr. Rudra Naik, Profes- sor &
Head, Department of Mechanical Engineering, B. M. S. College of Engineering,
Bengaluru, and our Principal, Dr. B. V. Ravishankar, Principal, B. M. S. College of
Engineering, Bengaluru.
We would like to thank Our Parents, whose love and guidance are important to us
in whatever I pursue. They are the ultimate role models who provide unending inspiration
to us. Finally we would like to thank the one and all who have directly or indirectly
helped us in completing this project work successfully.
Abstract
Dear students, you have to write the abstract here. The abstract should not be more than
300 words in total.
This abstract should contain all aspects of your project work written in short. It
should include the introduction, literature survey, design concepts, methodology, results
and discussions as well as the conclusion, but not more than one or two sentences for
each category.
Keywords: Include, important, keywords, of your, entire, project, work, seperated, by
comma.
i
Contents
Abstract . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
List of figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
List of tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
1 Introduction 1
1.1 Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1.1 Engineering Analysis . . . . . . . . . . . . . . . . . . . . . . . 1
1.1.2 Analytical Method . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1.3 Numerical Method . . . . . . . . . . . . . . . . . . . . . . . . 2
1.2 Physical problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2 Methodology 4
2.1 Section 1 of chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1.1 Sub-section 1 of chapter . . . . . . . . . . . . . . . . . . . . . 4
2.1.2 Sub-section 2 of chapter . . . . . . . . . . . . . . . . . . . . . 4
2.1.3 Numerical Method . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 Physical problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Bibliography 6
ii
List of Figures
1.1 Logo of B. M. S. College of Engineering . . . . . . . . . . . . . . . . . 2
iii
List of Tables
1.1 Table to test captions and labels Table to test captions and labels Table
to test captions and labels . . . . . . . . . . . . . . . . . . . . . . . . 2
1.2 Table to test captions and labels Table to test captions and labels Table
to test captions and labels . . . . . . . . . . . . . . . . . . . . . . . . 3
iv
Chapter 1
Introduction
This chapter gives introduction to the subject area, its background and applications.
1.1 Background
This section gives background information.
A = πr2 (1.1)
Empirical Models
These are empirical models. This is some random text in the paragraph, random text in the
paragraph, random text in the paragraph and random text in the paragraph.
eπi + 1 = 0 (1.2)
1
Figure 1.1: Logo of B. M. S. College of Engineering
πr2
A=
(1.3)
12 2
= πr
2
Equations 1.2 and 1.3 show how equations can be represented in different formats.
Table 1.1: Table to test captions and labels Table to test captions and labels Table to test
captions and labels
Col1 Col2 Col2 Col3
1 6 87837 787
2 7 78 5415
5 88 788 6344
2
Table 1.2: Table to test captions and labels Table to test captions and labels Table to test
captions and labels
Col1 Col2 Col2 Col3
1 6 87837 787
2 7 78 5415
5 88 788 6344
3
Chapter 2
Methodology
1 6 87837 787
2 7 78 5415
5 88 788 6344
Mathematical Models
These are mathematical models.
Empirical Models
These are empirical models. ParagraphParagraphParag raphParagraphParagraph-
ParagraphPara graphParagraphParagraphParagraphParagraphPara graphParagraph- Paragraph
4
Figure 2.1: BMSCE Logo
5
Bibliography
[1] G. Saravanakumar and L. Ravikumar, “Effect of temperature in the stiffness and
damping characteristics of magnetorheological fluid squeeze film dampers,”
International Journal of Emerging Trends in Engineering Research, vol. 6, no. 3, pp.
414–418, 2012.
[2] G. Saravanakumar, L. Ravikumar and Raghu Yogaraju, Elements of Engineering
Graphics, 1st Edition. India: John Wiley and Sons, Chennai, 2016, ISBN: 1234- 567-
890.