Professional Documents
Culture Documents
DATA SHEET
ASSP
1 Channel 8-bit A/D
Converter
MB40528
■ DESCRIPTION
The MB40528 is a full parallel comparison (flash) type 8-bit resolution analog-to-digital converter, designed for
various video and image processing applications.
The MB40528 has 8-bit resolution 1 channel A/D converter. Input analog data are converted into digital data by
the A/D converter in minimum 60 Mega samples per seconds (MSPS).
The analog data is provided in a range of DC +3V to +5V (2Vp-p level) and the output digital data in TTL level.
The MB40528 is fabricated by the Fujitsu’s advanced bipolar process and housed in a 20-pin plastic DIP/SOP.
The MB40528 is suitable for various video and image applications.
■ FEATURES
• Conversion method : Full parallel comparison type
• 8-bit x 1 channel A/D converter
• Max. 60 MHz input clock frequency providing 60 MSPS data conversion rate
• Linearity error : Typical +/-0.15%
• Analog input voltage range : 3V to 5V (2Vp-p level)
• Digital input/output voltage level : TTL level
• On-chip reference voltage generator
• Low power consumption : Typical 400mW
• Single +5V power supply
• Operating temperature range : -20°C to +70°C
• Fujitsu’s advanced bipolar process
■ PACKAGES
20-pin Plastic DIP 20-pin Plastic SOP
(DIP-20P-M01) (FPT-20P-M05)
■ PIN ASSIMENT
(TOP-VIEW)
GND 1 20 GND
(LSB) D8 2 19 VCC
D7 3 18 VCC
D6 4 17 VRB
D5 5 16 VINA
D4 6 15 VRM
D3 7 14 VCC
D2 8 13 VCC
(MSB) D1 9 12 GND
CLK 10 11 GND
(DIP-20P-M01)
(FPT-20P-M05)
2
MB40528
■ BLOCK DIAGRAM
VCC
13 14 18 19
CLK 10
VINA 16
VCC
R1
1
R
2 9 D1 (MSB)
8 D2
R 7 D3
127
LATCH 6 D4
R/2 255 to 8
&
VRM 15 ENCODER
BUFFER 5 D5
R/2 128
4 D6
3 D7
R
254 2 D8 (LSB)
R
255
R2
REFERENCE VOLTAGE
VRB 17
GENERATOR
0.6 x VCC
1 11 12 20
GND
3
MB40528
■ PIN DESCRIPTION
Symbol Pin No. Type Name & Function
Power Supply
VCC 13, 14, 18, 19 - +5 V DC power supply pins.
GND 1, 11, 12, 20 - Ground pins.
Clock
CLK 10 I Clock input pin. The input voltage is a TTL level.
Analog Input
Analog signal input pin. The analog data to be converted is input to
VINA 16 I
this pin. The input voltage range is 3V to 5V (VRB to VCC).
Digidal Output
D1 9
D2 8
D3 7
D4 6 8-bit resolution A/D converter outputs.
O The output voltage is a TTL level.
D5 5 Also, D1 pin is an MSB and D8 pin is a LSB.
D6 4
D7 3
D8 2
Refernce Voltage Output
Reference voltage output pin. This pin outputs 0.6 x VCC [V] (Typ.
3V). An 1µF or more capacitor having superior frequency
VRB 17 O
characteristic should be connected to this pin. The capacitor must
be connected near the device.
Others
An intermediate voltage output pin. An intermediate voltage
VRM 15 O between VCC and VRB (Typ. 4V) is output from this pin. Normally
this pin is left open.
4
MB40528
5
MB40528
■ ELECTRICAL CHARACTERISTICS
1. DC CHARACTERISTICS
(1) Analog Block
Value
Parameter Symbol Condition Unit
Min. Typ. Max.
Resolution – – – 8 – bit
Linearity Error LE DC Accuracy – ±0.15 ±0.3 %
Differentioal Linearity Error DLE DC Accuracy – 0.12 – %
Analog Input Equivalent
RINA – 0.2 1.5 – MΩ
Resister
Analog Input Capacitance CINA – – 40 – pF
Analog “H” Level Input Current IIHA VINA = VCC – – 210 µA
Analog “L” Level Input Current IILA VINA = VREF – – 200 µA
Reference Voltage VRB – 0.6VCC-0.1 0.6VCC 0.6VCC+0.1 V
Supply Current ICC – – 80* 150 mA
* : VCC = 5.0V, Ta = +25°C
2. AC CHARACTERISTICS
Value
Parameter Symbol Condition Unit
Min. Typ. Max.
Maximum Conversion Rate fs – 60 – – MSPS
Digital Output Delay Time tpd – 5.0 8.5 15 ns
6
MB40528
twH twL
A/D Converter 3V
Input Clock 1.5V
(CLK)
0V
tpd
7
MB40528
■ EQUIVALENT CIRCUITS
VCC VCC
VD
VINA VINA
CINA RINA
IBIAS
VCC
20kΩ
Buffer
VRB pin
IRB
30kΩ
GND
8
MB40528
VCC
50kΩ 6.5kΩ 50kΩ
3.2kΩ 3.2kΩ
GND
CL CL = 15pF
GND
Note : CL includes the parasitic capacitance of JIG.
9
MB40528
■ LINEARITY ERROR
1. Ideal Conversion Characteristic
255 11111111
254 11111110
253 11111101
129 10000001
128 10000000
127 01111111
2 00000010
1 00000001
0 00000000
VZT ≅ 3.006 V VINA VFT ≅ 4.996 V
VZT and VFT are the typical values when VCC = 5 V and VRB = 3 V.
255 11111111
254 11111110
253 11111101
LE253
129 10000001
LE127
LEnmax
2 00000010 = Linearity Error
FS
1 00000001 LE2
LE1
0 00000000
VZT VINA VFT
10
MB40528
■ NOTES ON USE
1. Power Supply Patterns of the PCB
The power supply wire patterns (VCC and GND patterns) of the PCB should be designed as wide as possible in order to
reduce parasitic impedance.
Also, the VCC and GND patterns which are connected to the VCC and GND pins of the device must be handled and designed
as analog system pattern and so, their circuit patterns must be separate from digital system patterns of other peripheral
devices.
2. Switching Noise
In order to reduce switching noise as much as possible, high-frequency bypass capacitor must be connected between VCC
and GND pins and VRB and GND pins.
In this case, the capacitor should be connected to the pins as near as possible.
■ ORDERING INFORMATION
Part number Package Remarks
20-pin Plastic DIP
MB40528P
(DIP-20P-M01)
20-pin Plastic SOP
MB40528PF
(FPT-20P-M05)
11
MB40528
■ PACKAGE DIMENSIONS
20-pin Plastic DIP
(DIP-20P-M01)
+0.20
24.64 –0.30
+.008
.970 –.012
INDEX-1
INDEX-2 6.60±0.25
(.260±.010)
4.36(.172)MAX 0.51(.020)MIN
0.25±0.05
(.010±.002)
3.00(.118)MIN 0.46±0.08
(.018±.003)
(Continued)
12
MB40528
(Continued)
20-pin Plastic SOP
(FPT-20P-M05)
+0.25 +.010
12.70 –0.20 .500 –.008 2.80(.110)MAX
(Mounting height)
0.05(.002)MIN
(STAND OFF)
+0.05
1.27(.050)TYP 0.45±0.10 0.15 –0.02 0.50±0.20(.020±.008)
Ø0.13(.005) M
+.002
(.018±.004) .006 –.001
"A" 0.60(.024)
0.10(.004)
0.18(.007)MAX
11.43(.450)REF
0.68(.027)MAX
Dimensions in mm (inches)
C 1994 FUJITSU LIMITED F20015S-3C-2
13
MB40528
FUJITSU LIMITED
For further information please contact:
F0001
FUJITSU LIMITED Printed in Japan