Professional Documents
Culture Documents
PART B (4*15)
(1) The dimensions of the mating parts, according to basic hole system, are given as follows :
Hole : 25.00 mm Shaft : 24.99 mm
25.08 mm 24.94 mm
Find the hole tolerance, shaft tolerance and allowance.
(2) Find out the numbers of the R5 basic series from 1 to 10..
(3) Define ‘mechanical properties’ of an engineering material. Explain any six mechanical
properties.
(4) Give composition of following material
(i) X 10 Cr18Ni9Mo4Si2, (ii) XT 72 W 18 Cr 4 V 1,(iii) FG 200-,(iv) 35C8,(v) FeE 230,
(vi) CS640
PART C (2*20)
(1) Calculate the tolerances, fundamental deviations and limits of size for hole and shaft in the
following
cases of fits :
(a) 30 H 8 / d 9; and (b) 45 H 8 / f 7
(2) A manufacturer is interested in starting a business with five different models of tractors ranging
from 7.5 to 75 kW capacities. Specify power capacities of the models. There is an expansion
plan to further increase the number of models from five to nine to fulfill the requirement of
farmers. Specify the power capacities of the additional models.