Professional Documents
Culture Documents
Page 1 of 7
TECHNOMELT MELTACE 709-4 20KG SDS No. : 479908
V001.4
Revision: 02.03.2021
printing date: 19.03.2021
Emergency information: FOR EMERGENCIES ONLY (Spill, major leak, Fire, Exposure, or Accident). Call
CHEMTREC: +1 703-741-5970
Skin contact: After contact with the hot melt: cool with water, seek medical attention.
Cool melted product on skin with plenty of water. Do not remove solidified product.
Get medical attention.
Eye contact: After contact with the hot melt: cool with water, seek medical attention.
Special protection equipment and Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA).
precautions for firefighters:
Environmental precautions: Do not empty into drains / surface water / ground water.
MINERAL OIL, EXCLUDING METAL Value type Time Weighted Average (TWA):
WORKING FLUIDS, PURE, HIGHLY
AND SEVERELY REFINED,
INHALABLE FRACTION
8042-47-5
mg/m3 5
Remarks ACGIH
White mineral oil (petroleum), highly Value type Short Term Exposure Limit (STEL):
refined
8042-47-5
mg/m3 10
Remarks ID NAB
White mineral oil (petroleum), highly Value type Time Weighted Average (TWA):
refined
8042-47-5
mg/m3 5
Remarks ID NAB
Engineering controls: Provide adequate local exhaust ventilation to maintain worker exposure below exposure
limits.
General protection and hygiene The workplace should be equipped with an emergency shower and eye-rinsing facility.
measures:
Hygienic measures: Do not eat, drink or smoke while working. Wash hands before work breaks and after
finishing work. Good industrial hygiene practices should be observed.
General toxicological To the best of our knowledge no harmful effects are to be expected if the product is handled
information: and used properly.
Symptoms of Overexposure: None known.
Skin corrosion/irritation:
Toxicity:
Packaging
Disposal of uncleaned packages: Packaging that cannot be cleaned are to be disposed of in the same manner as the product.