Professional Documents
Culture Documents
Bore, Stroke, Displacement and Compression Ratio
Bore, Stroke, Displacement and Compression Ratio
DISPLACEMENT AND
COMPRESSION RATIO
Fill in all the yellow boxes on the left with:
-Standard bore in mm.
-Any oversize from a rebore (+20 thou is 0.5mm)
-Engine Stroke in mm
This will give the engines displacement in cubic centrimeters (cc) in the blue box.
The combustion chamber volume in cc can then be added to the appropriate box to give the engines compresion ratio
Displacement (cc) 0
If you only have bore and stroke in inches, use the boxes below to convert to mm.
If you would like any further information on this, or anything else on our website please don't hesitate to con
WWW.KINGPINCOMPONENTS.CO.UK
ANDY@KINGPINCOMPONENTS.CO.UK
D
IO
sion ratio.