Professional Documents
Culture Documents
6-310-0260-1CS 12-14 x 37 Hex Head HiGrip Teks with Seal Climaseal 3 1000 114,000
6-310-0261-2CS 12-14 x 50 Hex Head Hi Grip Teks with Seal Climaseal 3 1000 84,000
6-310-0350-4CS 12-14 x 55 Hex Head Hi Grip Teks with Seal Climaseal 3 1000 84,000
6-310-0326-2CS 12-14 x 68 Hex Head HiGripTeks with Seal Climaseal 3 1000 84,000
6-310-0580-1CS 12-14 x 80 Hex Head Hi GripTeks with Seal Climaseal 3 500 36,000
Application:
BuildexA 12-14 Hex Head Hi Grip TeksAScrews with a seal are used for roof and side cladding to metal.
Features Benefits
Teks Point For drilling into metal while ensuring maximum pullout strength and high strip torque.
6.0 mm Max.
6.0 mm Max. 6.0 mm Max.
Mechanical Properties:
Single Shear Strength (Newton) 8,500 | Axial Tensile (Newton) 13,600 | Torsion Strength 12,3 Newton-metre
Material: Carbon Steel SAE 1022 | Heat Treatment: To AS 3566.1 | Finish: Climaseal 3A
Corrosion Performance:
Climaseal 3A Screws comply to Australian Standards AS 3566.2 Class 3 and are suitable for ISO 9223-2012 Category 3
A Division of ITW Australia Pty Ltd.ACN 004 235 036 ABN 63 004 235 063 | Status WorkInProgress | Written By John Mallet | Date Written 6/10/2015 | Current Issue 1 | Current Issue Date 6/10/2015 | Page 1 of 2
Whilst every care was taken in preparation of this guide, BuildexA accepts no responsibility for the accuracy of the information supplied. Copyright 2011. The contents of this document are the
exclusive copyright of BuildexA and may not be reproduced without written permission.
http://www.itwcs.com.au/
Buildex ® 31158-PDS-CSI
Length
Effective
Length
Grip
Length Sealing
Washer
n14.7
Max.
Teks Pt.
5/16 Hex.
Drive 12-14 Thread
Shank Guard
6.3 12-14 Hi Grip
Max. Thread
Note
Lengths from underside of sealing washer and includes compression.
6-310-0260-1CS 12-14 x 37 Hex Head HiGrip Teks 35.0 / 36.5 16.3 Min. 20.5 Min.
6-310-0261-2CS 12-14 x 50 Hex Head Hi Grip Teks 48.0 / 49.5 16.3 Min. 33.5 Min.
6-310-0350-4CS 12-14 x 55 Hex Head Hi Grip Teks 53.0 / 54.5 26.0 / 28.0 38.5 Min.
6-310-0326-2CS 12-14 x 68 Hex Head HiGripTeks 66.0 / 67.5 35.0 Min. 51.5 Min.
6-310-0580-1CS 12-14 x 80 Hex Head Hi GripTeks 78.0 / 79.5 42.0 Min. 63.5 Min.
A Division of ITW Australia Pty Ltd.ACN 004 235 036 ABN 63 004 235 063 | Status WorkInProgress | Written By John Mallet | Date Written 6/10/2015 | Current Issue 1 | Current Issue Date 6/10/2015 | Page 2 of 2
Whilst every care was taken in preparation of this guide, BuildexA accepts no responsibility for the accuracy of the information supplied. Copyright 2011. The contents of this document are the
exclusive copyright of BuildexA and may not be reproduced without written permission.
http://www.itwcs.com.au/