Professional Documents
Culture Documents
OVERVIEW : CAB
∂ The Model CAB1/ CAB2 / CAB3 are used to house system
modules like Powersupply, loop cards and battery.
∂ Fixing of CC5.
WHERE TO FIX:
∂ Cab1- Back Box:
∂ Do not locate the panel where there are high levels of vi-
bration or shock. Fig1.
Fig 1
∂ Position the backbox clear of obstructions so that the
front door opens freely and the controls and indicators
are easily accessible. –Fig2
Fig 2
∂ Note: In the unlikely event that the panel has been dam-
aged in transit, you MUST NOT install it but contact
supplier factory for their returns procedure.
REQUIRED ACCESSORIES
REQUIRED TOOLS:
∂ Spanners and box spanners.
∂ Hammer
∂ Drill the two holes located in the previous step and screw
Proprietary Information of Siemens Building Technologies IN BT SSP OPS TCG, July’17
All right reserved
in the top bolts, leaving a small gap between the wall
and each top bolt.
∂ Place the backbox over the two top bolts and allow it to
slide down over the bolts.
∂ Close the inner door and secure with the ¼ turn fastener.
∂ Close the outer door and secure with the key latch.