Professional Documents
Culture Documents
Syn-Pac e (Bolsa) Merv 11 - 13 - 14
Syn-Pac e (Bolsa) Merv 11 - 13 - 14
TECHNICAL DATA
Tri-Dim’s SYN-PAC E High Efficiency Extended Surface
Bag Filters utilize an advanced dual layer meltblown
media. This dual layered media allows for depth loading
– that is managing the dirt by capturing larger particles
on the upstream layer and having the downstream layer
focus on removing the smaller targeted particles. Depth
loading results in a higher dust holding capacity – UL Class 1
allowing for a longer service life. The media generates
high initial removal efficiencies of airborne particles.
This media is formed into tapered pockets with sonically
sealed pockets.
0.28 75
Percentage
0.14 50
0
246 369 492 615 25
FPM
40-45% 60-65% 80-85% 90-95%
0
0.35 0.62 1.14 1.88 3.46 6.2
SPECIFICATIONS Micron
40-45% 60-65% 80-85% 90-95%
MEDIA:
100% Synthetic Meltblown EFFICIENCY
40-45%
HEADER: ASHRAE 52.1 Dust Spot Average 54.2%
26 Gauge Galvaneal Steel ASHRAE 52.2 MERV 10 @ 492 FPM
60-65%
RECOMMENDED FINAL RESISTANCE: ASHRAE 52.1 Dust Spot Average 67.0%
1.50” W.G. ASHRAE 52.2 MERV 12 @ 492 FPM
80-85%
TEMPERATURE LIMIT ASHRAE 52.1 Dust Spot Average 86.2%
Maximum 140° F Constant ASHRAE 52.2 MERV 14 @ 492 FPM
90-95%
MEETS ANSI/UL CLASS 1 REQUIREMENTS ASHRAE 52.1 Dust Spot Average 91.3%
ASHRAE 52.2 MERV 15 @ 492 FPM
SYN-PAC E Technical Data
Nominal Size Actual Size Number Sq. Ft. Rated Rated Initial
(inches/mm) (inches/mm) Media Resistance at
of Capacity
(m2 ) Rated Flow
WxHxD WxH Pockets (CFM/m3/sec) (“W.G./PA)
12x24x15 (305x610x381) 11⅜x23⅜ (289x594) 4 20 (1.86) 1000 (0.47) 0.31 (77)
12x24x22 (305x610x559) 11⅜x23⅜ (289x594) 4 29 (2.69) 1000 (0.47) 0.28 (70)
MERV 10 (40-45%)
12x24x26 (305x610x660) 11⅜x23⅜ (289x594) 4 35 (3.25) 1000 (0.47) 0.26 (65) housings without
12x24x30 (305x610x762) 11⅜x23⅜ (289x594) 4 40 (3.72) 1000 (0.47) 0.22 (55) the need for the
12x24x36 (305x610x914) 11⅜x23⅜ (289x594) 4 48 (4.46) 1000 (0.47) 0.19 (47) Glide/Pack® holding
20x20x26 (508x508x660) 19⅜x19⅜ (492x492) 6 43 (3.99) 1390 (0.65) 0.26 (65) frames
20x20x30 (508x508x762) 19⅜x19⅜ (492x492) 6 50 (4.65) 1390 (0.65) 0.22 (55)
20x24x26 (508x610x660) 19⅜x23⅜ (492x594) 6 52 (4.83) 1667 (0.78) 0.26 (65)
Wire Support
20x24x30 (508x610x762) 19⅜x23⅜ (492x594) 6 60 (5.57) 1667 (0.78) 0.22 (55)
24x24x15 (610x610x381) 23⅜x23⅜ (594x594) 8 40 (3.72) 2000 (0.94) 0.35 (87)
24x24x22 (610x610x559) 23⅜x23⅜ (594x594) 8 58 (5.39) 2000 (0.94) 0.30 (75)
24x24x26 (610x610x660) 23⅜x23⅜ (594x594) 8 69 (6.41) 2000 (0.94) 0.26 (65)
24x24x30 (610x610x762) 23⅜x23⅜ (594x594) 8 80 (7.43) 2000 (0.94) 0.22 (55) NOTES:
24x24x36 (610x610x914) 23⅜x23⅜ (594x594) 8 96 (8.92) 2000 (0.94) 0.19 (47)
12x24x22 (305x610x559) 11⅜x23⅜ (289x594) 4 29 (2.69) 1000 (0.47) 0.48 (119) Additional Sizes
MERV 14 (80-85%)
12x24x26 (305x610x660) 11⅜x23⅜ (289x594) 4 35 (3.25) 1000 (0.47) 0.45 (112) and Special Size
12x24x30 (305x610x762) 11⅜x23⅜ (289x594) 4 40 (3.72) 1000 (0.47) 0.40 (100) filters are available -
12x24x36 (305x610x914) 11⅜x23⅜ (289x594) 4 48 (4.46) 1000 (0.47) 0.34 (85) contact your local
20x20x26 (508x508x660) 19⅜x19⅜ (492x492) 6 43 (3.99) 1390 (0.65) 0.45 (112) representative for
20x20x30 (508x508x762) 19⅜x19⅜ (492x492) 6 50 (4.65) 1390 (0.65) 0.40 (100) additional
20x24x26 (508x610x660) 19⅜x23⅜ (492x594) 6 52 (4.83) 1667 (0.78) 0.45 (112) information.
20x24x30 (508x610x762) 19⅜x23⅜ (492x594) 6 60 (5.57) 1667 (0.78) 0.40 (100)
24x24x22 (610x610x559) 23⅜x23⅜ (594x594) 8 58 (5.39) 2000 (0.94) 0.48 (119) Width and Height
24x24x26 (610x610x660) 23⅜x23⅜ (594x594) 8 69 (6.41) 2000 (0.94) 0.45 (112)
dimensions are not
24x24x30 (610x610x762) 23⅜x23⅜ (594x594) 8 80 (7.43) 2000 (0.94) 0.40 (100)
interchangeable.
24x24x36 (610x610x914) 23⅜x23⅜ (594x594) 8 96 (8.92) 2000 (0.94) 0.34 (85)
12x24x22 (305x610x559) 11⅜x23⅜ (289x594) 4 29 (2.69) 1000 (0.47) 0.51 (127)
Gasketing is
MERV 15 (90-95%)
Tri-Dim Filter Corporation is committed to continual product development – all descriptions, specifications and performance data are subject to change without notice.
Tri-Dim products are manufactured to exacting criteria - there can be a ±5% variance in filter performance. Tri-Dim® and Tri-Dek® are Registered Trademarks of Tri-Dim Filter Corporation.
SYN-PAC™ is a Trademark of Tri-Dim Filter Corporation
Brochure # 1100-8
Local Representation: Revision: 10/2011