Professional Documents
Culture Documents
NAVTOR AS
Elganeveien 1
4373 Egersund, Norway
+47 51 49 22 00
customerservice@navtor.com
NAVTOR AVCS ENC Service with JRC JAN-5203/720x/920x & JMR-720x/920x
CONTENTS
2
NAVTOR AVCS ENC Service with JRC JAN-5203/720x/920x & JMR-720x/920x
b. Change over to the second page of the menu using the page switching button of the
menu.
2. From the Task Menu enter 9999 in the password field and press enter to start the Task
Manager.
5. Map the ENC share to a drive letter by running the following command:
NET USE X: \\172.16.60.242\ENC /PERSISTENT:YES
6. Restart ECDIS
7. Repeat the above on all systems that will load ENCs directly from NavBox
3
NAVTOR AVCS ENC Service with JRC JAN-5203/720x/920x & JMR-720x/920x
On the NavBox you will find separate permit folders for each system you have ordered ENCs for.
These folders are named “ECDIS 1”, “ECDIS 2”, “UNIT 3”, “UNIT 4” and “UNIT 5”. (i.e. if you have two
ECDIS and one chart radar, you will find an “ECDIS 1”, “ECDIS 2” and “UNIT 3” folder on the NavBox).
b. Change over to the second page of the menu using the page switching button of the
menu.
4. Select [ENC]
4
NAVTOR AVCS ENC Service with JRC JAN-5203/720x/920x & JMR-720x/920x
5. Click [Manually]
6. Select the mapped network drive (X:) for the NavBox from the “Drive” drop-down menu (1),
browse to the appropriate folder on the NavBox (e.g. INFO\NAVTOR\PERMITS\ECDIS 1) for
the system you are installing to (2) and then click [OK] (3)
5
NAVTOR AVCS ENC Service with JRC JAN-5203/720x/920x & JMR-720x/920x
7. Click on the “Home” icon when the permit import has completed
b. Change over to the second page of the menu using the page switching button of the
menu.
6
NAVTOR AVCS ENC Service with JRC JAN-5203/720x/920x & JMR-720x/920x
4. Select [ENC]
5. Click [Manually]
7
NAVTOR AVCS ENC Service with JRC JAN-5203/720x/920x & JMR-720x/920x
6. Select the mapped network drive (X:) for the NavBox from the “Drive” drop-down menu (1)
and then click [OK] (2)
7. After a while you will receive the below prompt. Click on [All]
8
NAVTOR AVCS ENC Service with JRC JAN-5203/720x/920x & JMR-720x/920x
8. During the import you can click on the [Log] button (1) for more details
9. When the update has completed, click on the “Home” icon (2) to finish.
9
NAVTOR AVCS ENC Service with JRC JAN-5203/720x/920x & JMR-720x/920x
b. Change over to the second page of the menu using the page switching button of the
menu.
4. Select [ENC]
10
NAVTOR AVCS ENC Service with JRC JAN-5203/720x/920x & JMR-720x/920x
5. Click [Manually]
6. Select the mapped network drive for the Navbox from the “Drive” drop-down menu (1),
browse to the AIO folder on the NavBox (INFO\AIO) (2) and then click [OK] (3)
11
NAVTOR AVCS ENC Service with JRC JAN-5203/720x/920x & JMR-720x/920x
7. After a while you will receive the below prompt. Click on [All]
8. When the update has completed, click on the “Home” icon to finish.
12