Professional Documents
Culture Documents
PRIMARY APPLICATION
Draw Clean VO is a special liquid formulation that provides the excellent lubricating and cooling action
needed to lessen heat build-up between tool and work piece in certain metalworking operations. It's
successfully used for such operations as light metal forming of both painted and unpainted stock as well
as stamping and punching.
When used for forming light-gauge painted stock, Draw Clean VO dramatically exhibits its excellent
lubricity. The solvent-based vanishing oil softens the paint and metal just enough to give them elasticity.
This allows the paint and metal to stretch harmoniously moving together as one -- as the stock is formed
into a finished product. Then, Draw Clean VO disappears on dry-down, vanishing without leaving a visible
trace of residue.
A clear light-yellow liquid, Draw Clean VO is both transparent and non-foaming as applied. Thus, work in
production is kept easily visible for closer, safer control and fewer errors due to operator fatigue. By
reducing heat build-up on contact surfaces, Draw Clean VO also helps to prolong tool and die life. It gives
off no smoke when used as recommended.
CHEMICAL CHARACTERISTICS
Chemical Composition ............................................ Aliphatic solvents plus lubricant additive
Physical Form ......................................................... As received: Clear, light yellow liquid
As used: Clear, light yellow liquid
Odor ........................................................................ None
Specific Gravity ....................................................... 0.780 at 20°C (68°F)
Viscosity .................................................................. 2 to 4 cps, Brookfield Spindle 1, 60 rpm
Bulk Density ............................................................ 780 g/λ at 20°C (6.5 lb. /gal at 68°F)
Flash Point .............................................................. 52°C (125°F), Tag Closed Cup
Foam Tendency ...................................................... None
Recommended Diluents ......................................... Used full strength
Maximum Solubility ................................................. Not applicable
Behavior in Hard Water .......................................... Not applicable (Insoluble in Water)
Biodegradable Surfactants...................................... Not applicable (Non-surfactant material)
Phosphorous-Free .................................................. Yes
Normal Working Concentrations............................. Used full strength
Normal Working Temperatures .............................. Room Temperature
pH ........................................................................... Not applicable
APPLICATION PROCEDURE
Applicable on most ferrous and non-ferrous metals, Draw Clean VO is used full strength before forming,
stamping or punching operations. It's applied by the flow on method directly on parts to be worked. Since it
leaves no residue on dry down that would interfere with subsequent finishing operations, such as painting,
there's usually no need to rinse the worked surfaces. And usually no need to clean them before they're
shipped.
DISPOSAL
Any disposal of the materials referenced in this document should be in accordance with all applicable
federal, state, providential and local regulations. The process solution can contain components other than
those present in the materials as supplied. Analysis of process solutions may be required prior to disposal.
Chemetall US, Inc. (“Chemetall”) warrants that this product or products described herein will conform with its published specifications. The products supplied by Chemetall and information related to them
are intended for use by buyers having necessary industrial skill and knowledge. Buyers should undertake sufficient verification and testing to determine the suitability of the Chemetall materials for their
own purpose. Since buyer’s conditions of use of products are beyond Chemetall’s control, Chemetall does not warrant any recommendations and information for the use of such products. CHEMETALL
DISCLAIMS ALL OTHER WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE IN CONNECTION WITH THE USE OF
ITS PRODUCTS.
Corporate Headquarters and Eastern Branch (800) 526-4473 • Central Branch (Midwest) (877) 941-3800
Western Branch (800) 331-1197 • Chemetall Canada Limited (877) 311-1471
Chemetall Mexicana 011 52 442 227 2000 F-17001 – 08/2013
Website: www.chemetallamericas.com • E-mail: chemetall.americas@chemetall.com Printed in the USA