This document contains two proposals for machining connector shafts. The first proposal is from SSC Works to fabricate a connector shaft out of SS304 material for 15,675,000 Rupiah within 12 days. The second proposal is from PT. Kawan Mandiri Bersama to fabricate rolling machine parts like adjuster, gearbox, and sprocket shafts for prices between 3,850,000-13,520,000 Rupiah within 14 days. Both proposals include machining, drilling, assembly, and alignment of the fabricated parts.
This document contains two proposals for machining connector shafts. The first proposal is from SSC Works to fabricate a connector shaft out of SS304 material for 15,675,000 Rupiah within 12 days. The second proposal is from PT. Kawan Mandiri Bersama to fabricate rolling machine parts like adjuster, gearbox, and sprocket shafts for prices between 3,850,000-13,520,000 Rupiah within 14 days. Both proposals include machining, drilling, assembly, and alignment of the fabricated parts.
This document contains two proposals for machining connector shafts. The first proposal is from SSC Works to fabricate a connector shaft out of SS304 material for 15,675,000 Rupiah within 12 days. The second proposal is from PT. Kawan Mandiri Bersama to fabricate rolling machine parts like adjuster, gearbox, and sprocket shafts for prices between 3,850,000-13,520,000 Rupiah within 14 days. Both proposals include machining, drilling, assembly, and alignment of the fabricated parts.
- FABRICATE CONNECTOR SHAFT MATERIAL SS304 (INCL MATERIAL) - ALIGNMENT SHAFT WITH EXSTING SCREW SHAFT (ALIGNMENT AT SITE, - FABRICATE CONNECTOR SHAFT long lathe machine not available) MATERIAL SS304 (INCL MATERIAL) - DRILL AND ASSEMBLY PINLOCK - ALIGNMENT SHAFT WITH EXSTING SCREW SHAFT SCOPE - DRILL AND ASSEMBLY PINLOCK
GENERAL SERVICE: PRE POST-
INSPECTION , PACKING SALVAGE PROCESS - MACHINING - DRILL HOLE - ASSEMBLY PRICE (INCL PPN 10%) Rp 15,675,000.00 Rp 3,850,000.00 TIME SCHEDULE 12 DAYS AFTER PO RECEIVED 14 DAYS AFTER PO RECEIVED
MACHINING ROLLING MACHINE
VENDOR BUBUT PRATAMA GRESIK PT. KAWAN MANDIRI BERSAMA -Rolling Maching Adjuster shaft -Rolling Maching Adjuster shaft (fabircation only tail shaft and (fabircation only tail shaft and assembly) assembly) - Rolling Maching gearbox shaft - Rolling Maching gearbox shaft (fabircation only tail shaft and (fabircation only tail shaft and assembly) assembly) - Rolling Maching sprocket shaft - Rolling Maching sprocket shaft (fabircation only tail shaft and (fabircation only tail shaft and SCOPE assembly) assembly)
- all include with pin lock
PRICE (exl PPN 10%) Rp 12,600,000.00 Rp 13,520,000.00
Disccount Rp 1,600,000.00 Rp - Grand Total Rp 11,000,000.00 Rp 13,520,000.00 TIME SCHEDULE 12 DAYS AFTER PO RECEIVED 14 DAYS AFTER PO RECEIVED