Professional Documents
Culture Documents
MARÇO E ABRIL
ISO/IEC 10646:2017/Amd 1:2019 - Dogra, Gunjala Gondi, Makasar, Medefaidrin, Indic Siyaq
Numbers and other characters
ISO 8378-3:1986 - Information processing -- Data interchange on 130 mm (5.25 in) flexible disk
cartridges using modified frequency modulation recording at 7 958 ftprad; 3,8 tpmm (96 tpi), on
both sides -- Part 3: Track format B
ISO/IEC 19086-4:2019 - Cloud computing -- Service level agreement (SLA) framework -- Part 4:
Components of security and of protection of PII
ISO/IEC 24711:2015 - Method for the determination of ink cartridge yield for colour inkjet printers
and multi-function devices that contain printer components
ISO/IEC 23008-9:2019 - Information technology -- High efficiency coding and media delivery in
heterogeneous environments -- Part 9: 3D Audio conformance testing
ISO/IEC 23005-5:2019 - Information technology -- Media context and control -- Part 5: Data
formats for interaction devices
ISO/IEC 23008-3:2019 - Information technology -- High efficiency coding and media delivery in
heterogeneous environments -- Part 3: 3D audio
ISO/IEC 15961-3:2019 - Information technology -- Data protocol for radio frequency identification
(RFID) for item management -- Part 3: RFID data constructs
ISO/IEC 24791-3:2014 - Information technology -- Radio frequency identification (RFID) for item
management -- Software system infrastructure -- Part 3: Device management
ISO/IEC 24786:2009 - Information technology -- User interfaces -- Accessible user interface for
accessibility settings
ISO/IEC 23988:2007 - Information technology -- A code of practice for the use of information
technology (IT) in the delivery of assessments
ISO/IEC 24713-2:2008 - Information technology -- Biometric profiles for interoperability and data
interchange -- Part 2: Physical access control for employees at airports
ISO/IEC 24713-1:2008 - Information technology -- Biometric profiles for interoperability and data
interchange -- Part 1: Overview of biometric systems and biometric profiles
ISO/IEC 21823-1:2019 - Internet of things (IoT) -- Interoperability for internet of things systems --
Part 1: Framework
ISO/IEC/IEEE 8802-A:2015/Amd 2:2019 - Local medium access control (MAC) address usage
ISO/IEC/IEEE 8802-3:2017/Amd 11:2019 - Physical layer and management parameters for serial
25 Gb/s ethernet operation over single-mode fiber
ISO/IEC 8802-5:1998/Amd 1:1998 - Dedicated token ring operation and fibre optic media
ISO/IEC 25000:2014 - Systems and software engineering -- Systems and software Quality
Requirements and Evaluation (SQuaRE) -- Guide to SQuaRE
ISO/IEC 25051:2014 - Software engineering -- Systems and software Quality Requirements and
Evaluation (SQuaRE) -- Requirements for quality of Ready to Use Software Product (RUSP) and
instructions for testing
ISO 5807:1985 - Information processing -- Documentation symbols and conventions for data,
program and system flowcharts, program network charts and system resources charts
ISO/IEC 25063:2014 - Systems and software engineering -- Systems and software product
Quality Requirements and Evaluation (SQuaRE) -- Common Industry Format (CIF) for usability:
Context of use description
ISO/IEC 25045:2010 - Systems and software engineering -- Systems and software Quality
Requirements and Evaluation (SQuaRE) -- Evaluation module for recoverability
ISO/IEC 15475-1:2002 - Information technology -- CDIF transfer format -- Part 1: General rules
for syntaxes and encodings
ISO/IEC 8631:1989 - Information technology -- Program constructs and conventions for their
representation
ISO/IEC 14102:2008 - Information technology -- Guideline for the evaluation and selection of
CASE tools
ISO/IEC 25001:2014 - Systems and software engineering -- Systems and software Quality
Requirements and Evaluation (SQuaRE) -- Planning and management
ISO/IEC 25041:2012 - Systems and software engineering -- Systems and software Quality
Requirements and Evaluation (SQuaRE) -- Evaluation guide for developers, acquirers and
independent evaluators
ISO/IEC 25040:2011 - Systems and software engineering -- Systems and software Quality
Requirements and Evaluation (SQuaRE) -- Evaluation process
ISO/IEC 25021:2012 - Systems and software engineering -- Systems and software Quality
Requirements and Evaluation (SQuaRE) -- Quality measure elements
ISO 11540:2014 - Writing and marking instruments -- Specification for caps to reduce the risk of
asphyxiation
ISO/TC 2 - Fasteners
ISO 10669:1999 - Plain washers for tapping screw and washer assemblies -- Normal and large
series -- Product grade A
ISO 10673:2009 - Plain washers for screw and washer assemblies -- Small, normal and large
series -- Product grade A
ISO 10644:2009 - Screw and washer assemblies made of steel with plain washers -- Washer
hardness classes 200 HV and 300 HV
ISO 10664:2014 - Hexalobular internal driving feature for bolts and screws
ISO 15483:1999 - Cross recessed raised countersunk head drilling screws with tapping screw
thread
ISO 15481:1999 - Cross recessed pan head drilling screws with tapping screw thread
ISO 15482:1999 - Cross recessed countersunk head drilling screws with tapping screw thread
ISO 10666:1999 - Drilling screws with tapping screw thread -- Mechanical and functional
properties
ISO 15330:1999 - Fasteners -- Preloading test for the detection of hydrogen embrittlement --
Parallel bearing surface method
ISO 1891-2:2014 - Fasteners -- Terminology -- Part 2: Vocabulary and definitions for coatings
ISO 6157-1:1988 - Fasteners -- Surface discontinuities -- Part 1: Bolts, screws and studs for
general requirements
ISO 6157-1:1988 - Fasteners -- Surface discontinuities -- Part 1: Bolts, screws and studs for
general requirement
ISO 5269-1:2005 - Pulps -- Preparation of laboratory sheets for physical testing -- Part 1:
Conventional sheet-former method
ISO 16065-1:2014 - Pulps -- Determination of fibre length by automated optical analysis -- Part 1:
Polarized light method
ISO 16065-2:2014 - Pulps -- Determination of fibre length by automated optical analysis -- Part 2:
Unpolarized light method
ISO/TR 24498:2019 - Paper, board and pulps -- Estimation of uncertainty for test methods by
interlaboratory comparisons
ISO 6588-2:2012 - Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 2:
Hot extraction
ISO 6588-1:2012 - Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 1:
Cold extraction
ISO 16945:2014 - Corrugating medium -- Determination of the edge crush resistance after
laboratory fluting
ISO 535:2014 - Paper and board -- Determination of water absorptiveness -- Cobb method
ISO 12625-3:2014 - Tissue paper and tissue products -- Part 3: Determination of thickness,
bulking thickness and apparent bulk density and bulk
ISO 2493-2:2011 - Paper and board -- Determination of bending resistance -- Part 2: Taber-type
tester
ISO 28004-2:2014 - Security management systems for the supply chain -- Guidelines for the
implementation of ISO 28000 -- Part 2: Guidelines for adopting ISO 28000 for use in medium and
small seaport operations
ISO 19292:2014 - Ships and marine technology -- Lifesaving and fire protection -- Point-type
resettable flame detectors for ships
ISO 24409-3:2014 - Ships and marine technology -- Design, location and use of shipboard safety
signs, safety-related signs, safety notices and safety markings -- Part 3: Code of practice
ISO 799-1:2019 -Ships and marine technology -- Pilot ladders -- Part 1: Design ad specification
ISO 18770:2005 - Ships and marine technology -- Machinery-space flammable oil systems --
Prevention of leakage of flammable oil
ISO 18770:2005 - Ships and marine technology -- Machinery-space flammable oil systems --
Prevention of leakage of flammable oil
ISO 8861:1998 - Shipbuilding -- Engine-room ventilation in diesel-engined ships -- Design
requirements and basis of calculations
ISO 18770:2005 - Ships and marine technology -- Machinery-space flammable oil systems --
Prevention of leakage of flammable oil
ISO 16328:2014 - Ships and marine technology -- Gyro-compasses for high-speed craft
ISO 22090-1:2014 - Ships and marine technology -- Transmitting heading devices (THDs) -- Part
1: Gyro-compasses
ISO 22090-2:2014 - Ships and marine technology -- Transmitting heading devices (THDs) -- Part
2: Geomagnetic principles
ISO 22090-3:2014 - Ships and marine technology -- Transmitting heading devices (THDs) -- Part
3: GNSS principles
ISO 19636:2019 - Ships and marine technology -- General requirements for inclinometers used
for the determination of trim and list of LNG carriers
ISO 17683:2014 - Ships and marine technology -- Ceramic weld backing for marine use
ISO 4156-1:2005 - Straight cylindrical involute splines -- Metric module, side fit -- Part 1:
Generalities
ISO 4156-2:2005 - Straight cylindrical involute splines -- Metric module, side fit -- Part 2:
Dimensions
ISO 4156-3:2005 - Straight cylindrical involute splines -- Metric module, side fit -- Part 3:
Inspection
ISO/TC 17 - Steel
ISO 5952:2019 -Steel sheet, hot-rolled, of structural quality with improved atmospheric corrosion
resistance
ISO 6932:2014 - Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
ISO 15630-2:2019 - Steel for the reinforcement and prestressing of concrete -- Test methods --
Part 2: Welded fabric and lattice girders
ISO 15630-3:2019 - Steel for the reinforcement and prestressing of concrete -- Test methods --
Part 3: Prestressing steel
ISO 15630-1:2019 - Steel for the reinforcement and prestressing of concrete -- Test methods --
Part 1: Reinforcing bars, rods and wire
ISO 10893-7:2019 - Non-destructive testing of steel tubes -- Part 7: Digital radiographic testing of
the weld seam of welded steel tubes for the detection of imperfections
ISO 10893-6:2019 - Non-destructive testing of steel tubes -- Part 6: Radiographic testing of the
weld seam of welded steel tubes for the detection of imperfections
ISO 683-3:2019 - Heat-treatable steels, alloy steels and free-cutting steels -- Part 3: Case-
hardening steels
ISO 27996:2009 - Aerospace fluid systems -- Elastomer seals -- Storage and shelf life
ISO 5859:2014 - Aerospace series -- Graphic symbols for schematic drawings of hydraulic and
pneumatic systems and components
ISO 17355:2007 - Space data and information transfer systems -- CCSDS file delivery protocol
ISO 16695:2014 - Space environment (natural and artificial) -- Geomagnetic reference models
ISO 16691:2014 - Space systems -- Thermal control coatings for spacecraft -- General
requirements
ISO/TR 18146:2015 - Space systems -- Space debris mitigation design and operation guidelines
for spacecraft
ISO 27875:2019 - Space systems -- Re-entry risk management for unmanned spacecraft and
launch vehicle orbital stages
ISO 10299:2000 - Aerospace -- Rivets, solid -- Material and metric series identification
ISO 13597:2000 - Aerospace -- Inserts, self-locking, with MJ threads, open type, in metallic
material, coated or uncoated -- Dimensions
ISO 13598:2000 - Aerospace -- Inserts, self-locking, with MJ threads, reduced flanges, closed
type, in metallic material, coated or uncoated -- Dimensions
ISO 13599:2000 - Aerospace -- Inserts, with clearance hole, in metallic material, coated or
uncoated -- Dimensions
ISO 14277:2002 - Aerospace -- Drivers, ribbed, for internal offset cruciform ribbed or unribbed
drives -- Metric series
ISO 3353-2:2002 - Aerospace -- Lead and runout threads -- Part 2: Internal threads
ISO 14278:2002 - Aerospace -- Gauges, for internal offset cruciform ribbed or unribbed drives --
Metric series
ISO 3353-1:2002 - Aerospace -- Lead and runout threads -- Part 1: Rolled external threads
ISO 13596:2000 - Aerospace -- Inserts, self-locking, with MJ threads, closed type, in metallic
material, coated or uncoated -- Dimensions
ISO 3230:1998 - Aerospace -- Rivets, solid, 100 degrees normal countersunk head with dome,
metallic material, with or without surface treatment -- Dimensions
ISO 14280:2002 - Aerospace -- Drivers, ribbed, for internal cruciform ribbed or unribbed drives --
Metric series
ISO 14281:2002 - Aerospace -- Gauges, for internal cruciform ribbed or unribbed drives -- Metric
series
ISO 14275:2002 - Aerospace -- Drives, internal, offset cruciform, ribbed -- Metric series
ISO 6182-14:2019 - Fire protection -- Automatic nozzle systems -- Part 14: Requirements and
test methods for water spray nozzles
ISO 6182-4:2019 - Fire protection -- Automatic sprinkler systems -- Part 4: Requirements and test
methods for quick opening devices
ISO 15031-4:2014 - Road vehicles -- Communication between vehicle and external equipment for
emissions-related diagnostics -- Part 4: External test equipment
ISO 18541-4:2015 - Road vehicles -- Standardized access to automotive repair and maintenance
information (RMI) -- Part 4: Conformance test
ISO 20078-2:2019 - Road vehicles -- Extended vehicle (ExVe) web services -- Part 2: Access
ISO 18541-2:2014 - Road vehicles -- Standardized access to automotive repair and maintenance
information (RMI) -- Part 2: Technical requirements
ISO 20078-1:2019 - Road vehicles -- Extended vehicle (ExVe) web services -- Part 1: Content
ISO 18541-3:2014 - Road vehicles -- Standardized access to automotive repair and maintenance
information (RMI) -- Part 3: Functional user interface requirements
ISO 18541-1:2014 - Road vehicles -- Standardized access to automotive repair and maintenance
information (RMI) -- Part 1: General information and use case definition
ISO 19642-5:2019 - Road vehicles -- Automotive cables -- Part 5: Dimensions and requirements
for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. single core copper conductor cables
ISO 19642-6:2019 - Road vehicles -- Automotive cables -- Part 6: Dimensions and requirements
for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. single core aluminium conductor
cables
ISO 11452-2:2019 - Road vehicles -- Component test methods for electrical disturbances from
narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure
ISO 19642-3:2019 - Road vehicles -- Automotive cables -- Part 3: Dimensions and requirements
for 30 V a.c. or 60 V d.c. single core copper conductor cables
ISO 19642-4:2019 - Road vehicles -- Automotive cables -- Part 4: Dimensions and requirements
for 30 V a.c. and 60 V d.c. single core aluminium conductor cables
ISO 19642-9:2019 - Road vehicles -- Automotive cables -- Part 9: Dimensions and requirements
for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. round, sheathed, screened or
unscreened multi or single core copper conductor cables
ISO 19642-10:2019 - Road vehicles -- Automotive cables -- Part 10: Dimensions and
requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. round, sheathed,
screened or unscreened multi or single core aluminium conductor cables
ISO 19642-7:2019 - Road vehicles -- Automotive cables -- Part 7: Dimensions and requirements
for 30 V a.c. or 60 V d.c. round, sheathed, screened or unscreened multi or single core copper
conductor cables
ISO 19642-5:2019 - Road vehicles -- Automotive cables -- Part 5: Dimensions and requirements
for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. single core copper conductor cables
ISO 19642-6:2019 - Road vehicles -- Automotive cables -- Part 6: Dimensions and requirements
for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. single core aluminium conductor
cables
ISO 11452-2:2019 - Road vehicles -- Component test methods for electrical disturbances from
narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure
ISO 19642-3:2019 - Road vehicles -- Automotive cables -- Part 3: Dimensions and requirements
for 30 V a.c. or 60 V d.c. single core copper conductor cables
ISO 19642-4:2019 - Road vehicles -- Automotive cables -- Part 4: Dimensions and requirements
for 30 V a.c. and 60 V d.c. single core aluminium conductor cables
ISO 19642-9:2019 - Road vehicles -- Automotive cables -- Part 9: Dimensions and requirements
for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. round, sheathed, screened or
unscreened multi or single core copper conductor cables
ISO 19642-10:2019 - Road vehicles -- Automotive cables -- Part 10: Dimensions and
requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. round, sheathed,
screened or unscreened multi or single core aluminium conductor cables
ISO 19642-7:2019 - Road vehicles -- Automotive cables -- Part 7: Dimensions and requirements
for 30 V a.c. or 60 V d.c. round, sheathed, screened or unscreened multi or single core copper
conductor cables
ISO 4925:2005 - Road vehicles -- Specification of non-petroleum-base brake fluids for hydraulic
systems
ISO 15037-1:2019 - Road vehicles -- Vehicle dynamics test methods -- Part 1: General conditions
for passenger cars
ISO 7879:1997 - Diesel engines -- Cradle-mounted in-line fuel injection pumps -- Mounting
dimensions
ISO 8535-2:2003 - Compression-ignition engines -- Steel tubes for high-pressure fuel injection
pipes -- Part 2: Requirements for composite tubes
ISO 3929:2003 - Road vehicles -- Measurement methods for exhaust gas emissions during
inspection or maintenance
ISO 7876-5:2004 - Fuel injection equipment -- Vocabulary -- Part 5: Common rail fuel injection
system
ISO 9102:1997 - Diesel engines -- Screw-in injection nozzle holders, types 24, 25, 26 and 26.1
ISO 7026:1997 - Diesel engines -- Screw-in injection nozzle holders, types 20, 21, 21.1 and 27
for pintle nozzle size "S", type "B"
ISO 7876-4:2004 - Fuel injection equipment -- Vocabulary -- Part 4: High-pressure pipes and end-
connections
ISO 22241-1:2019 - Diesel engines -- NOx reduction agent AUS 32 -- Part 1: Quality
requirements
ISO 12103-2:1997 - Road vehicles -- Test dust for filter evaluation -- Part 2: Aluminium oxide test
dust
ISO 22241-2:2019 - Diesel engines -- NOx reduction agent AUS 32 -- Part 2: Test methods
ISO 3538:1997 - Road vehicles -- Safety glazing materials -- Test methods for optical properties
ISO/TR 14933:2012 - Road vehicles -- Test procedures for evaluating out-of-position vehicle
occupant interactions with deploying side air bags
ISO 8714:2002 - Electric road vehicles -- Reference energy consumption and range -- Test
procedures for passenger cars and light commercial vehicles
ISO 28981:2009 - Mopeds - Methods for setting the running resistance on a chassis
dynamometer
ISO 13044-2:2013 - Road vehicles -- Fully automatic coupling systems 24 V (FACS) for heavy
commercial vehicle combinations -- Part 2: 50 mm fifth wheel couplings -- Electrical and
pneumatic interface
ISO 21308-5:2014 - Road vehicles -- Product data exchange between chassis and body work
manufacturers (BEP) -- Part 5: Coding of loader crane bodywork
ISO 12614-13:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components --
Part 13: Tank pressure control regulator
ISO 12614-14:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components --
Part 14: Differential pressure fuel content gauge
ISO 12614-7:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part
7: Pressure relief valve
ISO 12614-15:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components --
Part 15: Capacitance fuel content gauge
ISO 12614-1:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part
1: General requirements and definitions
ISO 12614-16:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components --
Part 16: Heat exchanger - vaporizer
ISO 12614-5:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part
5: Tank pressure gauge
ISO 12614-11:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components --
Part 11: Fittings
ISO 12614-6:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part
6: Pressure regulator
ISO 12614-12:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components --
Part 12: Rigid fuel line in copper and its alloys
ISO 12614-8:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part
8: Excess flow valve
ISO 12614-2:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part
2: Performance and general test methods
ISO 12614-17:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components --
Part 17: Natural gas detector
ISO 12614-3:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part
3: Check valve
ISO 12614-18:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components --
Part 18: Gas temperature sensor
ISO 12614-9:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part
9: Gas-tight housing and ventilation hose
ISO 12614-4:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part
4: Manual valve
ISO 12614-10:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components --
Part 10: Rigid fuel line in stainless steel
ISO 12614-19:2017 - Road vehicles -- Liquefied natural gas (LNG) fuel system components --
Part 19: Automatic valve
ISO 12614-13:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components --
Part 13: Tank pressure control regulator
ISO 12614-14:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components --
Part 14: Differential pressure fuel content gauge
ISO 12614-7:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part
7: Pressure relief valve
ISO 12614-15:2014 -Road vehicles -- Liquefied natural gas (LNG) fuel system components --
Part 15: Capacitance fuel content gauge
ISO 12614-1:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part
1: General requirements and definitions
ISO 12614-16:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components --
Part 16: Heat exchanger - vaporizer
ISO 12614-5:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part
5: Tank pressure gauge
ISO 12614-11:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components --
Part 11: Fittings
ISO 12614-6:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part
6: Pressure regulator
ISO 12614-12:2014 - Road vehicles -- Liquefied natural gas (LNG) fuel system components --
Part 12: Rigid fuel line in copper and its alloys
ISO 7749-1:1995 - Agricultural irrigation equipment -- Rotating sprinklers -- Part 1: Design and
operational requirements
ISO 9261:2004 - Agricultural irrigation equipment -- Emitters and emitting pipe -- Specification
and test methods
ISO 12374:1995 - Agricultural irrigation -- Wiring and equipment for electrically driven or
controlled irrigation machines
ISO 15873:2002 - Irrigation equipment -- Differential pressure Venturi-type liquid additive injectors
ISO 11783-12:2019 - Tractors and machinery for agriculture and forestry -- Serial control and
communications data network -- Part 12: Diagnostics services
ISO/TS 28923:2012 - Agricultural machinery -- Guards for moving parts of power transmission --
Guard opening with tool
ISO 500-1:2014 - Agricultural tractors -- Rear-mounted power take-off types 1, 2, 3 and 4 -- Part
1: General specifications, safety requirements, dimensions for master shield and clearance zone
ISO 500-3:2014 - Agricultural tractors -- Rear-mounted power take-off types 1, 2, 3 and 4 -- Part
3: Main PTO dimensions and spline dimensions, location of PTO
ISO 5721-2:2014 - Agricultural tractors-- Requirements, test procedures and acceptance criteria
for the operator's field of vision -- Part 2: Field of vision to the side and to the rear
ISO3310-2:2013 - Test sieves -- Technical requirements and testing -- Part 2: Test sieves of
perforated metal plate
ISO/TC 28 - Petroleum and related products, fuels and lubricants from natural or synthetic
sources
ISO 10307-1:2009 - Petroleum products -- Total sediment in residual fuel oils -- Part 1:
Determination by hot filtration
ISO 20783-2:2003 - Petroleum and related products -- Determination of emulsion stability of fire-
resistant fluids -- Part 2: Fluids in category HFB
ISO 6250:1997 - Petroleum products -- Determination of the water reaction of aviation fuels
ISO 20764:2003 - Petroleum and related products -- Preparation of a test portion of high-boiling
liquids for the determination of water content -- Nitrogen purge method
ISO 2909:2002 - Petroleum products -- Calculation of viscosity index from kinematic viscosity
ISO 5275:2003 - Petroleum products and hydrocarbon solvents - Detection of thiols and other
sulfur species -- Doctor test
ISO 4261:2013 - Petroleum products -- Fuels (class F) -- Specifications of gas turbine fuels for
industrial and marine applications
ISO 8216-99:2002 - Petroleum products -- Fuels (class F) -- Classification -- Part 99: General
ISO 9162:2013 - Petroleum products -- Fuels (class F) -- Liquefied petroleum gases –
Specifications
ISO 6743-1:2002 - Lubricants, industrial oils and related products (class L) -- Classification -- Part
1: Family A (Total loss systems)
ISO 6743-99:2002 - Lubricants, industrial oils and related products (class L) -- Classification --
Part 99: General
ISO 6743-13:2002 - Lubricants, industrial oils and related products (class L) -- Classification --
Part 13: Family G (Slideways)
ISO/TS 12928:1999 - Lubricants, industrial oils and related products (class L) -- Family R
(Products for temporary protection against corrosion) - Guidelines for establishing specifications
ISO 6743-9:2003 - Lubricants, industrial oils and related products (class L) -- Classification -- Part
9: Family X (Greases)
ISO/TS 12927:1999 - Lubricants, industrial oils and related products (class L) -- Family M
(Metalworking) -- Guidelines for establishing specifications
ISO 19378:2003 - Lubricants, industrial oils and related products (class L) -- Machine-tool
lubricants -- Categories and specifications
ISO/TS 17306:2016 - Petroleum products -- Biodiesel -- Determination of free and total glycerin
and mono-, di- and tracylglycerols by gas chromatography
ISO/TS 13399-309:2016 - Cutting tool data representation and exchange -- Part 309: Creation
and exchange of 3D models -- Tool holders for indexable inserts
ISO/TS 13399-150:2008 - Cutting tool data representation and exchange -- Part 150: Usage
guidelines
ISO/TS 13399-308:2016 - Cutting tool data representation and exchange -- Part 308: Creation
and exchange of 3D models -- Milling cutters with arbor hole for indexable inserts
ISO/TS 13399-406:2019 - Cutting tool data representation and exchange -- Part 406: Creation
and exchange of 3D models -- Modelling of connection interface
ISO/TS 13399-307:2016 - Cutting tool data representation and exchange -- Part 307: Creation
and exchange of 3D models -- End mills for indexable inserts
ISO/TS 13399-401:2016 - Cutting tool data representation and exchange -- Part 401: Creation
and exchange of 3D models -- Converting, extending and reducing adaptive items
ISO/TS 13399-312:2016 - Cutting tool data representation and exchange -- Part 312: Creation
and exchange of 3D models -- Reamers for indexable inserts
ISO/TS 13399-204:2016 - Cutting tool data representation and exchange -- Part 204: Creation
and exchange of 3D models -- Inserts for reaming
ISO/TS 13399-303:2016 - Cutting tool data representation and exchange -- Part 303: Creation
and exchange of 3D models -- Solid end mills
ISO/TS 13399-405:2016 -Cutting tool data representation and exchange -- Part 405: Creation
and exchange of 3D models -- Collets
ISO/TS 13399-304:2016 - Cutting tool data representation and exchange -- Part 304: Creation
and exchange of 3D models -- Solid milling cutters with arbor hole
ISO/TS 13399-311:2016 - Cutting tool data representation and exchange -- Part 311: Creation
and exchange of 3D models -- Solid reamers
ISO 2380-2:2004 - Assembly tools for screws and nuts -- Screwdrivers for slotted-head screws --
Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
ISO 8764-2:2004 - Assembly tools for screws and nuts -- Screwdrivers for cross-recessed head
screws -- Part 2: General requirements, lengths of blades and marking of hand-operated
screwdrivers
ISO 2351-3:2014 - Assembly tools for screws and nuts -- Machine-operated screwdriver bits --
Part 3: Screwdriver bits for hexagon socket screws
ISO 21537-2:2004 - Clamping flanges for superabrasive cutting-off wheels -- Part 2: Building and
construction
ISO 21537-1:2004 - Clamping flanges for superabrasive cutting-off wheels -- Part 1: Natural
stone
ISO 11900-3:2004 - Tools for pressing -- Ball-lock punch retainers -- Part 3: Type E, reduced for
heavy duty
ISO 11901-4:2014 - Tools for pressing -- Gas springs -- Part 4: Gas springs with increased spring
force and same built height
ISO 11901-3:2014 - Tools for pressing -- Gas springs -- Part 3: Gas spring with increased spring
force and compact built height
ISO 8020:2002 - Tools for pressing -- Punches with cylindrical head and straight or reduced
shank
ISO 5414-2:2002 - Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank
tools -- Part 2: Connecting dimensions of chucks and designation
ISO 12164-1:2001 - Hollow taper interface with flange contact surface -- Part 1: Shanks --
Dimensions
ISO 5407:1981 - As-sintered hardmetal pellets used in heading dies -- Dimensions and
tolerances
ISO 3438:2013 - Subland twist drills for holes prior to tapping screw threads
ISO 12164-2:2001 - Hollow taper interface with flange contact surface -- Part 2:Receivers --
Dimensions
ISO 12164-4:2014 - Hollow taper interface with flange contact surface -- Part 4: Dimensions of
receivers for stationary tools
ISO 12164-3:2014 - Hollow taper interface with flange contact surface -- Part 3: Dimensions of
shanks for stationary tools
ISO 2924:1973 - Solid and segmental circular saws for cold cutting of metals -- Interchangeability
dimensions of the drive -- Saw diameter range 224 to 2 240 mm
ISO 5167-1:2003 - Measurement of fluid flow by means of pressure differential devices inserted
in circular cross-section conduits running full -- Part 1: General principles and requirements
ISO 5167-6:2019 - Measurement of fluid flow by means of pressure differential devices inserted
in circular cross-section conduits running full -- Part 6: Wedge meters
ISO 5167-4:2003 - Measurement of fluid flow by means of pressure differential devices inserted
in circular cross-section conduits running full -- Part 4: Venturi tubes
ISO 5167-2:2003 - Measurement of fluid flow by means of pressure differential devices inserted
in circular cross-section conduits running full -- Part 2: Orifice plates
ISO 14511:2019 - Measurement of fluid flow in closed conduits -- Thermal mass flowmeters
ISO/TC 33 - Refractories
ISO 6541:1981 - Agricultural food products -- Determination of crude fibre content -- Modified
Scharrer method
ISO 21446:2019 - Infant formula and adult nutritionals -- Determination of trans and total (cis +
trans) vitamin K1 content -- Normal phase HPLC
ISO 22006:2009 - Quality management systems -- Guidelines for the application of ISO
9001:2008 to crop production
ISO 5498:1981 - Agricultural food products -- Determination of crude fibre content -- General
method
ISO 5985:2002 - Animal feeding stuffs -- Determination of ash insoluble in hydrochloric acid
ISO 15914:2004 - Animal feeding stuffs -- Enzymatic determination of total starch content
ISO 14939:2001 - Animal feeding stuffs -- Determination of carbadox content -- Method using
high-performance liquid chromatography
ISO 9831:1998 - Animal feeding stuffs, animal products, and faeces or urine -- Determination of
gross calorific value -- Bomb calorimeter method
ISO 661:2003 - Animal and vegetable fats and oils -- Preparation of test sample
ISO 6800:1997 - Animal and vegetable fats and oils -- Determination of the composition of fatty
acids in the 2-position of the triglyceride molecules
ISO 16035:2003 - Animal and vegetable fats and oils -- Determination of low-boiling halogenated
hydrocarbons in edible oils
ISO 20613:2019 - Sensory analysis -- General guidance for the application of sensory analysis in
quality control
ISO 7971-2:2019 - Cereals -- Determination of bulk density, called mass per hectolitre -- Part 2:
Method of traceability for measuring instruments through reference to the international standard
instrument
ISO 7971-3:2019 - Cereals -- Determination of bulk density, called mass per hectolitre -- Part 3:
Routine method
ISO/TS 9941:2005 - Milk and canned evaporated milk -- Determination of tin content --
Spectrometric method
ISO 8968-1:2014 - Milk and milk products -- Determination of nitrogen content -- Part 1: Kjeldahl
principle and crude protein calculation
ISO 13965:1998 - Meat and meat products -- Determination of starch and glucose contents --
Enzymatic method
ISO 22117:2019 - Microbiology of the food chain -- Specific requirements and guidance for
proficiency testing by interlaboratory comparison
ISO 16925:2014 - Paints and varnishes -- Determination of the resistance of coatings to pressure
water-jetting
ISO 15528:2013 - Paints, varnishes and raw materials for paints and varnishes -- Sampling
ISO 16927:2014 - Paints and varnishes -- Determination of the overcoatability and recoatability of
a coating
ISO 21546:2019 - Paints and varnishes -- Determination of the resistance to rubbing using a
linear abrasion tester (crockmeter)
ISO 639-1:2002 - Codes for the representation of names of languages -- Part 1: Alpha-2 code
ISO 12615:2004 - Bibliographic references and source identifiers for terminology work
ISO/TC 38 - Textiles
ISO 9073-10:2003 - Textiles -- Test methods for nonwovens -- Part 10: Lint and other particles
generation in the dry state
ISO 1833-12:2019 - Textiles -- Quantitative chemical analysis -- Part 12: Mixtures of acrylic,
certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method
using dimethylformamide)
ISO 20921:2019 - Textiles -- Determination of stable nitrogen isotope ratio in cotton fibres
ISO 22958:2005 - Textiles -- Water resistance -- Rain tests: exposure to a horizontal water spray
ISO 13935-1:2014 - Textiles -- Seam tensile properties of fabrics and made-up textile articles --
Part 1: Determination of maximum force to seam rupture using the strip method
ISO 2313:1972 - Textiles -- Determination of the recovery from creasing of a horizontally folded
specimen of fabric by measuring the angle of recovery
ISO 11749:2014 - Belt drive -- V-ribbed belts for the automotive industry -- Fatigue test
ISO 1813:2014 - Belt drives -- V-ribbed belts, joined V-belts and V-belts including wide section
belts and hexagonal belts -- Electrical conductivity of antistatic belts: Characteristics and methods
of test
ISO/TC 42 - Photography
ISO 12232:2019 - Photography -- Digital still cameras -- Determination of exposure index, ISO
speed ratings, standard output sensitivity, and recommended exposure index
ISO 18938:2014 - Imaging materials -- Optical discs -- Care and handling for extended storage
ISO 18943:2014 - Imaging materials -- Magnetic hard drives used for image storage -- Care and
handling
ISO/TC 43 - Acoustics
ISO 3740:2019 - Acoustics -- Determination of sound power levels of noise sources -- Guidelines
for the use of basic standards
ISO 17201-3:2019 - Acoustics -- Noise from shooting ranges -- Part 3: Sound propagation
calculations
ISO 17652-3:2003 - Welding -- Test for shop primers in relation to welding and allied processes --
Part 3: Thermal cutting
ISO 17652-4:2003 - Welding -- Test for shop primers in relation to welding and allied processes --
Part 4: Emission of fumes and gases
ISO 5817:2014 - Welding -- Fusion-welded joints in steel, nickel, titanium and their alloys (beam
welding excluded) -- Quality levels for imperfections
ISO 15616-4:2008 - Acceptance tests for CO2-laser beam machines for high quality welding and
cutting -- Part 4: Machines with 2-D moving optics
ISO 17652-2:2003 - Welding -- Test for shop primers in relation to welding and allied processes --
Part 2: Welding properties of shop primers
ISO 17652-1:2003 - Welding -- Test for shop primers in relation to welding and allied processes --
Part 1: General requirements
ISO 15614-10:2005 - Specification and qualification of welding procedures for metallic materials -
- Welding procedure test -- Part 10: Hyperbaric dry welding
ISO 15610:2003 - Specification and qualification of welding procedures for metallic materials --
Qualification based on tested welding consumables
ISO 15618-2:2001 - Qualification testing of welders for underwater welding -- Part 2: Diver-
welders and welding operators for hyperbaric dry welding
ISO 9606-2:2004 - Qualification test of welders -- Fusion welding -- Part 2: Aluminium and
aluminium alloys
ISO 12224-3:2003 - Solder wire, solid and flux cored -- Specifications and test methods -- Part 3:
Wetting balance test method for flux cored solder wire efficacy
ISO 9455-2:1993 - Soft soldering fluxes -- Test methods -- Part 2: Determination of non-volatile
matter, ebulliometric method
ISO 9455-9:1993 - Soft soldering fluxes -- Test methods -- Part 9: Determination of ammonia
content
ISO 9454-2:1998 - Soft soldering fluxes -- Classification and requirements -- Part 2: Performance
requirements
ISO 18274:2010 - Welding consumables -- Solid wire electrodes, solid strip electrodes, solid
wires and solid rods for fusion welding of nickel and nickel alloys -- Classification
ISO 14341:2010 - Welding consumables -- Wire electrodes and weld deposits for gas shielded
metal arc welding of non alloy and fine grain steels -- Classification
ISO 2560:2009 - Welding consumables -- Covered electrodes for manual metal arc welding of
non-alloy and fine grain steels -- Classification
ISO 24034:2010 - Welding consumables -- Solid wire electrodes, solid wires and rods for fusion
welding of titanium and titanium alloys -- Classification
ISO 15792-1:2000 - Welding consumables -- Test methods -- Part 1: Test methods for all-weld
metal test specimens in steel, nickel and nickel alloys
ISO 5178:2019 - Destructive tests on welds in metallic materials -- Longitudinal tensile test on
weld metal in fusion welded joints
ISO 8205-2:2002 - Water-cooled secondary connection cables for resistance welding -- Part 2:
Dimensions and requirements for single-conductor connection cables
ISO 8205-1:2002 - Water-cooled secondary connection cables for resistance welding -- Part 1:
Dimensions and requirements for double-conductor connection cables
ISO 17677-1:2019 - Resistance welding -- Vocabulary -- Part 1: Spot, projection and seam
welding
ISO 8205-3:2012 - Water-cooled secondary connection cables for resistance welding -- Part 3:
Test requirements
ISO/TS 15011-6:2012 - Health and safety in welding and allied processes -- Laboratory method
for sampling fume and gases -- Part 6: Procedure for quantitative determination of fume and
gases from resistance spot welding
ISO 8032:1997 - Rubber and plastics hose assemblies -- Flexing combined with hydraulic
impulse test (half-omega test)
ISO 8030:2014 - Rubber and plastics hoses -- Method of test for flammability
ISO 4080:2009 - Rubber and plastics hoses and hose assemblies -- Determination of
permeability to gas
ISO 8031:2009 - Rubber and plastics hoses and hose assemblies -- Determination of electrical
resistance and conductivity
ISO 27126:2014 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the
transfer of hydrocarbons, solvents and chemicals -- Specification
ISO 1307:2006 - Rubber and plastics hoses -- Hose sizes, minimum and maximum inside
diameters, and tolerances on cut-to-length hoses
ISO 27127:2014 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the
transfer of liquid petroleum gas and liquefied natural gas -- Specification
ISO 18752:2014 - Rubber hoses and hose assemblies -- Wire- or textile-reinforced single-
pressure types for hydraulic applications -- Specification
ISO 2929:2014 - Rubber hoses and hose assemblies for bulk fuel delivery by truck --
Specification
ISO 6808:2014 - Plastics hoses and hose assemblies for suction and low-pressure discharge of
petroleum liquids -- Specification
ISO 4023:2009 - Rubber hoses and hose assemblies for steam -- Test methods
ISO 8330:2014 - Rubber and plastics hoses and hose assemblies -- Vocabulary
ISO 1402:2009 - Rubber and plastics hoses and hose assemblies -- Hydrostatic testing
ISO 11345:2006 - Rubber -- Assessment of carbon black and carbon black/silica dispersion --
Rapid comparative methods
ISO 19003:2006 - Rubber and rubber products -- Guidance on the application of statistics to
physical testing
ISO 6225-1:2006 - Rubber, raw, natural -- Determination of castor oil content -- Part 1:
Determination of castor oil glyceride content by thin-layer chromatography
ISO 2006-1:2009 - Rubber latex, synthetic -- Determination of mechanical stability -- Part 1: High-
speed method
ISO 5794-2:2014 - Rubber compounding ingredients -- Silica, precipitated, hydrated -- Part 2:
Evaluation procedures in styrene-butadiene rubber
ISO 4659:2014 - Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches)
-- Evaluation procedure
ISO 2393:2014 - Rubber test mixes -- Preparation, mixing and vulcanization -- Equipment and
procedures
ISO 2000:2014 - Rubber, raw natural -- Guidelines for the specification of technically specified
rubber (TSR)
ISO 14285:2014 - Rubber and plastics gloves for food services -- Limits for extractable
substances
ISO 5979:1982 - Rubber or plastics coated fabrics -- Determination of flexibility -- Flat loop
method
ISO 2231:1989 - Rubber- or plastics-coated fabrics -- Standard atmospheres for conditioning and
testing
ISO 6451:1982 - Plastics coated fabrics -- Polyvinyl chloride coatings -- Rapid method for
checking fusion
ISO 11800:1998 - Information and documentation -- Requirements for binding materials and
methods used in the manufacture of books
ISO 16439:2014 - Information and documentation -- Methods and procedures for assessing the
impact of libraries
ISO/TC 47 - Chemistry
ISO 8174:1986 - Ethylene and propylene for industrial use -- Determination of acetone,
acetonitrile, propan-2-ol and methanol -- Gas chromatographic method
ISO 7884-1:1987 - Glass -- Viscosity and viscometric fixed points -- Part 1: Principles for
determining viscosity and viscometric fixed points
ISO 4794:1982 - Laboratory glassware -- Methods for assessing the chemical resistance of
enamels used for colour coding and colour marking
ISO 12777-2:2000 - Methods of test for pallet joints -- Part 2: Determination of withdrawal and
head pull-through resistance of pallet nails and staples
ISO 12777-3:2002 - Methods of test for pallet joints -- Part 3: Determination of strength of pallet
joints
ISO 15629:2002 - Pallets for materials handling -- Quality of fasteners for assembly of new and
repair of used, flat, wooden pallets
ISO 4727:1988 - Oil of palmarosa (Cymbopogon martinii (Roxburgh) W. Watson var. motia)
ISO 16964:2019 - Gas cylinders -- Flexible hoses assemblies -- Specification and testing
ISO 11439:2013 - Gas cylinders -- High pressure cylinders for the on-board storage of natural
gas as a fuel for automotive vehicles
ISO 3500:2005 - Gas cylinders -- Seamless steel CO2 cylinders for fixed fire-fighting installations
on ships
ISO 10691:2004 - Gas cylinders -- Refillable welded steel cylinders for liquified petroleum gas
(LPG) -- Procedures for checking before, during and after filling
ISO 10464:2004 - Gas cylinders -- Refillable welded steel cylinders for liquefied petroleum gas
(LPG) -- Periodic inspection and testing
ISO/TC 60 - Gears
ISO 10300-1:2014 - Calculation of load capacity of bevel gears -- Part 1: Introduction and general
influence factors
ISO/TS 6336-4:2019 - Calculation of load capacity of spur and helical gears -- Part 4: Calculation
of tooth flank fracture load capacity
ISO 10300-2:2014 - Calculation of load capacity of bevel gears -- Part 2: Calculation of surface
durability (pitting)
ISO 10300-3:2014 - Calculation of load capacity of bevel gears -- Part 3: Calculation of tooth root
strength
ISO 10300-1:2014 - Calculation of load capacity of bevel gears -- Part 1: Introduction and general
influence factors
ISO/TS 6336-4:2019 - Calculation of load capacity of spur and helical gears -- Part 4: Calculation
of tooth flank fracture load capacity
ISO 10300-2:2014 - Calculation of load capacity of bevel gears -- Part 2: Calculation of surface
durability (pitting)
ISO 10300-3:2014 - Calculation of load capacity of bevel gears -- Part 3: Calculation of tooth root
strength
ISO/TC 61 - Plastics
ISO 1043-4:1998 - Plastics -- Symbols and abbreviated terms -- Part 4: Flame retardants
ISO 14632:1998 - Extruded sheets of polyethylene (PE-HD) -- Requirements and test methods
ISO 15109:1998 -Adhesives -- Determination of the time to rupture of bonded joints under static
load
ISO 9664:1993 - Adhesives -- Test methods for fatigue properties of structural adhesives in
tensile shear
ISO 11833-2:1998 - Plastics -- Unplasticized poly(vinyl chloride) sheets -- Types, dimensions and
characteristics -- Part 2: Sheets of thickness less than 1 mm
ISO 9142:2003 - Adhesives -- Guide to the selection of standard laboratory ageing conditions for
testing bonded joints
ISO 15106-3:2003 - Plastics -- Film and sheeting -- Determination of water vapour transmission
rate -- Part 3: Electrolytic detection sensor method
ISO 9653:1998 - Adhesives -- Test method for shear impact strength of adhesive bonds
ISO 13445:2003 - Adhesives -- Determination of shear strength of adhesive bonds between rigid
substrates by the block-shear method
ISO 15987:2003 - Plastics -- Film and sheeting -- Biaxially oriented polyamide (nylon) films
ISO 17555:2003 - Plastics -- Film and sheeting -- Biaxially oriented polypropylene (PP) films
ISO 15105-2:2003 - Plastics -- Film and sheeting -- Determination of gas-transmission rate -- Part
2: Equal-pressure method
ISO 15028:2014 - Plastics -- Aromatic isocyanates for use in the production of polyurethanes --
Determination of hydrolysable chlorine
ISO 25761:2014 - Plastics -- Polyols for use in the production of polyurethanes -- Determination
of basicity (total amine value), expressed as percent nitrogen
ISO 527-4:1997 - Plastics -- Determination of tensile properties -- Part 4: Test conditions for
isotropic and orthotropic fibre-reinforced plastic composites
ISO 9163:2005 - Textile glass -- Rovings -- Manufacture of test specimens and determination of
tensile strength of impregnated rovings
ISO 527-5:2009 - Plastics -- Determination of tensile properties -- Part 5: Test conditions for
unidirectional fibre-reinforced plastic composites
ISO 1268-11:2005 - Fibre-reinforced plastics -- Methods of producing test plates -- Part 11:
Injection moulding of BMC and other long-fibre moulding compounds -- Small plates
ISO 1268-10:2005 - Fibre-reinforced plastics -- Methods of producing test plates -- Part 10:
Injection moulding of BMC and other long-fibre moulding compounds -- General principles and
moulding of multipurpose test specimens
ISO 15985:2014 - Plastics -- Determination of the ultimate anaerobic biodegradation under high-
solids anaerobic-digestion conditions -- Method by analysis of released biogas
ISO 15791-1:2014 - Plastics -- Development and use of intermediate-scale fire tests for plastics
products -- Part 1: General guidance
ISO 17223:2014 - Plastics -- Determination of yellowness index and change in yellowness index
ISO 11443:2014 - Plastics -- Determination of the fluidity of plastics using capillary and slit-die
rheometers
ISO 1183-2:2019 - Plastics -- Methods for determining the density of non-cellular plastics -- Part
2: Density gradient column method
ISO 20965:2005 - Plastics -- Determination of the transient extensional viscosity of polymer melts
ISO 1183-1:2019 - Plastics -- Methods for determining the density of non-cellular plastics -- Part
1: Immersion method, liquid pycnometer method and titration method
ISO 22007-6:2014 - Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part
6: Comparative method for low thermal conductivities using a temperature-modulation technique
ISO 1628-1:2009 - Plastics -- Determination of the viscosity of polymers in dilute solution using
capillary viscometers -- Part 1: General principles
ISO 21309-2:2019 - Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion
materials -- Part 2: Preparation of test specimens and determination of properties
ISO 21309-1:2019 - Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion
materials -- Part 1: Designation system and basis for specifications
ISO 21301-2:2019 - Plastics -- Ethylene-vinyl acetate (EVAC) moulding and extrusion materials --
Part 2: Preparation of test specimens and determination of properties
ISO 21301-1:2019 - Plastics -- Ethylene-vinyl acetate (EVAC) moulding and extrusion materials --
Part 1: Designation system and basis for specifications
ISO 1269:2006 - Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination
of volatile matter (including water)
ISO 12000:2014 - Plastics/rubber -- Polymer dispersions and rubber latices (natural and
synthetic) -- Definitions and review of test methods
ISO 16365-1:2014 - Plastics -- Thermoplastic polyurethanes for moulding and extrusion -- Part 1:
Designation system and basis for specifications
ISO 17855-1:2014 - Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 1:
Designation system and basis for specifications
ISO 16365-2:2014 - Plastics -- Thermoplastic polyurethanes for moulding and extrusion -- Part 2:
Preparation of test specimens and determination of properties
ISO 21305-2:2019 - Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 2:
Preparation of test specimens and determination of properties
ISO 16365-3:2014 - Plastics -- Thermoplastic polyurethanes for moulding and extrusion -- Part 3:
Distinction between ether and ester polyurethanes by determination of the ester group content
ISO 21305-1:2019 - Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 1:
Designation system and basis for specification
ISO/TC 67 - Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries
ISO 13085:2014 - Petroleum and natural gas industries -- Aluminium alloy pipe for use as tubing
for wells
ISO 10427-2:2004 - Petroleum and natural gas industries -- Equipment for well cementing -- Part
2: Centralizer placement and stop-collar testing
ISO 13503-6:2014 - Petroleum and natural gas industries -- Completion fluids and materials --
Part 6: Procedure for measuring leakoff of completion fluids under dynamic conditions
ISO 10426-5:2004 - Petroleum and natural gas industries -- Cements and materials for well
cementing -- Part 5: Determination of shrinkage and expansion of well cement formulations at
atmospheric pressure
ISO 13500:2008 - Petroleum and natural gas industries -- Drilling fluid materials -- Specifications
and tests
ISO 17078-1:2004 - Petroleum and natural gas industries -- Drilling and production equipment --
Part 1: Side-pocket mandrels
ISO 16812:2019 - Petroleum, petrochemical and natural gas industries -- Shell-and-tube heat
exchangers
ISO 2859-3:2005 - Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling
procedures
ISO 11843-6:2019 - Capability of detection -- Part 6: Methodology for the determination of the
critical value and the minimum detectable value in Poisson distributed measurements by normal
approximations
ISO 11648-1:2003 - Statistical aspects of sampling from bulk materials -- Part 1: General
principles
ISO 16355-3:2019 - Applications of statistical and related methods to new technology and
product development process -- Part 3: Quantitative approaches for the acquisition of voice of
customer and voice of stakeholder
ISO 13315-8:2019 - Environmental management for concrete and concrete structures -- Part 8:
Environmental labels and declarations
ISO 10782-1:1998 - Definitions and attributes of data elements for control and monitoring of
textile processes -- Part 1: Spinning, spinning preparatory and related processes
ISO 9398-1:2003 - Specifications for industrial laundry machines -- Definitions and testing of
capacity and consumption characteristics -- Part 1: Flatwork ironing machines
ISO 9398-3:2003 - Specifications for industrial laundry machines -- Definitions and testing of
capacity and consumption characteristics -- Part 3: Washing tunnels
ISO 9398-2:2003 - Specifications for industrial laundry machines -- Definitions and testing of
capacity and consumption characteristics -- Part 2: Batch drying tumblers
ISO 9398-4:2003 - Specifications for industrial laundry machines -- Definitions and testing of
capacity and consumption characteristics -- Part 4: Washer-extractors
ISO/TC 76 - Transfusion, infusion and injection, and blood processing equipment for
medical and pharmaceutical use
ISO 719:1985 - Glass -- Hydrolytic resistance of glass grains at 98 degrees C -- Method of test
and classification
ISO 11040-6:2019 - Prefilled syringes -- Part 6: Plastic barrels for injectables and sterilized
subassembled syringes ready for filling
ISO 8871-1:2003 - Elastomeric parts for parenterals and for devices for pharmaceutical use --
Part 1: Extractables in aqueous autoclavates
ISO 720:1985 - Glass -- Hydrolytic resistance of glass grains at 121 degrees C -- Method of test
and classification
ISO 15759:2005 - Medical infusion equipment -- Plastics caps with inserted elastomeric liner for
containers manufactured by the blow-fill-seal (BFS) process
ISO 18771:2019 - Anodizing of aluminium and its alloys -- Method to test the surface abrasion
resistance using glass-coated abrasive paper
ISO 17615:2007 - Aluminium and aluminium alloys -- Alloyed ingots for remelting -- Specifications
ISO 3522:2007 - Aluminium and aluminium alloys -- Castings -- Chemical composition and
mechanical properties
ISO 20740:2019 - Martial arts -- Wushu Taiji sword -- Requirements and test method
ISO 23907-1:2019 - Sharps injury protection -- Requirements and test methods -- Part 1: Single-
use sharps containers
ISO 4037-1:2019 - Radiological protection -- X and gamma reference radiation for calibrating
dosemeters and doserate meters and for determining their response as a function of photon
energy -- Part 1: Radiation characteristics and production methods
ISO 4037-4:2019 - Radiological protection -- X and gamma reference radiation for calibrating
dosemeters and doserate meters and for determining their response as a function of photon
energy -- Part 4: Calibration of area and personal dosemeters in low energy X reference radiation
fields
ISO 4037-2:2019 - Radiological protection -- X and gamma reference radiation for calibrating
dosemeters and doserate meters and for determining their response as a function of photon
energy -- Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV
and 4 MeV to 9 MeV
ISO 4037-3:2019 - Radiological protection -- X and gamma reference radiation for calibrating
dosemeters and doserate meters and for determining their response as a function of photon
energy -- Part 3: Calibration of area and personal dosemeters and the measurement of their
response as a function of energy and angle of incidence
ISO 11929-1:2019 - Determination of the characteristic limits (decision threshold, detection limit
and limits of the coverage interval) for measurements of ionizing radiation -- Fundamentals and
application -- Part 1: Elementary applications
ISO 17873:2004 - Nuclear facilities -- Criteria for the design and operation of ventilation systems
for nuclear installations other than nuclear reactors
ISO 11929-3:2019 - Determination of the characteristic limits (decision threshold, detection limit
and limits of the coverage interval) for measurements of ionizing radiation -- Fundamentals and
application -- Part 3: Applications to unfolding methods
ISO 11929-2:2019 - Determination of the characteristic limits (decision threshold, detection limit
and limits of the coverage interval) for measurements of ionizing radiation -- Fundamentals and
application -- Part 2: Advanced applications
ISO 8425:2013 - Nuclear fuel technology -- Determination of plutonium in pure plutonium nitrate
solutions -- Gravimetric method
ISO 8299:2019 - Nuclear fuel technology -- Determination of the isotopic and elemental uranium
and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization
mass spectrometry
ISO 9161:2019 - Uranium dioxide powder -- Determination of apparent density and tap density
ISO 18256-1:2019 - Nuclear fuel technology -- Dissolution of plutonium dioxide-containing
materials -- Part 1: Dissolution of plutonium dioxide powders
ISO 9463:2019 - Nuclear energy -- Nuclear fuel technology -- Determination of plutonium in nitric
acid solutions by spectrophotometry
ISO 18195:2019 - Method for the justification of fire partitioning in water cooled nuclear power
plants (NPP)
ISO/TC 87 - Cork
ISO 2386:2015 - Packed cork -- Virgin cork, raw reproduction cork, ramassage, gleanings, burnt
cork, boiled reproduction cork and raw corkwaste -- Determination of moisture content
ISO 16987:2003 - Wood-based panels -- Determination of moisture resistance under cyclic test
conditions
ISO 21703:2019 - Surface active agents -- Microbiology -- Microbiological test methods for liquid
hand dishwashing
ISO 3008-1:2019 - Fire resistance tests -- Door and shutter assemblies -- Part 1: General
requirements
ISO 834-10:2014 - Fire resistance tests -- Elements of building construction -- Part 10: Specific
requirements to determine the contribution of applied fire protection materials to structural steel
elements
ISO 834-11:2014 - Fire resistance tests -- Elements of building construction -- Part 11: Specific
requirements for the assessment of fire protection to structural steel elements
ISO 13784-1:2014 - Reaction to fire test for sandwich panel building systems -- Part 1: Small
room test
ISO 3008-1:2019 - Fire resistance tests -- Door and shutter assemblies -- Part 1: General
requirements
ISO 834-10:2014 - Fire resistance tests -- Elements of building construction -- Part 10: Specific
requirements to determine the contribution of applied fire protection materials to structural steel
elements
ISO 834-11:2014 - Fire resistance tests -- Elements of building construction -- Part 11: Specific
requirements for the assessment of fire protection to structural steel elements
ISO/TS 19677:2019 - Guidelines for assessing the adverse impact of wildland fires on the
environment and to people through environmental exposure
ISO 24679-1:2019 - Fire safety engineering -- Performance of structures in fire -- Part 1: General
ISO 1743:1982 - Glucose syrup -- Determination of dry matter content -- Refractive index method
ISO 10520:1997 - Native starch -- Determination of starch content -- Ewers polarimetric method
ISO 5378:1978 - Starches and derived products -- Determination of nitrogen content by the
Kjeldahl method -- Spectrophotometric method
ISO/TC 96 - Cranes
ISO 16625:2013 - Cranes and hoists -- Selection of wire ropes, drums and sheaves
ISO 10245-2:2014 - Cranes -- Limiting and indicating devices -- Part 2: Mobile cranes
ISO 9374-3:2014 - Cranes -- Information to be provided for enquiries, orders, offers and supply --
Part 3: Tower cranes
ISO 4301-4:1989 - Cranes and related equipment -- Classification -- Part 4: Jib cranes
ISO 9194:1987 - Bases for design of structures -- Actions due to the self-weight of structures,
non-structural elements and stored materials -- Density
ISO 16839:2013 - Steel wire ropes -- Determination of the transverse rigidity of steel wire ropes
under no axial load condition
ISO 16841:2014 - Steel wire ropes -- Pulling eyes for rope installation -- Types and minimum
requirements
ISO 19427:2019 - Steel wire ropes -- Pre-fabricated parallel wire strands for suspension bridge
main cable -- Specifications
ISO 2063-1:2019 - Thermal spraying -- Zinc, aluminium and their alloys -- Part 1: Design
considerations and quality requirements for corrosion protection systems
ISO 10111:2019 - Metallic and other inorganic coatings -- Measurement of mass per unit area --
Review of gravimetric and chemical analysis methods
ISO 18431-3:2014 - Mechanical vibration and shock -- Signal processing -- Part 3: Methods of
time-frequency analysis
ISO 8727:1997 - Mechanical vibration and shock -- Human exposure -- Biodynamic coordinate
systems
ISO 14835-2:2005 - Mechanical vibration and shock -- Cold provocation tests for the assessment
of peripheral vascular function -- Part 2: Measurement and evaluation of finger systolic blood
pressure
ISO 13090-1:1998 - Mechanical vibration and shock -- Guidance on safety aspects of tests and
experiments with people -- Part 1: Exposure to whole-body mechanical vibration and repeated
shock
ISO 13753:1998 - Mechanical vibration and shock -- Hand-arm vibration -- Method for measuring
the vibration transmissibility of resilient materials when loaded by the hand-arm system
ISO 13284:2003 - Fork-lift trucks -- Fork-arm extensions and telescopic fork arms -- Technical
characteristics and strength requirements
ISO 5057:1993 - Industrial trucks -- Inspection and repair of fork arms in service on fork-lift trucks
ISO 13284:2003 - Fork-lift trucks -- Fork-arm extensions and telescopic fork arms -- Technical
characteristics and strength requirements
ISO 5057:1993 - Industrial trucks -- Inspection and repair of fork arms in service on fork-lift trucks
ISO 4365:2005 - Liquid flow in open channels -- Sediment in streams and canals -- Determination
of concentration, particle size distribution and relative density
ISO 16330:2003 - Reciprocating positive displacement pumps and pump units -- Technical
requirements
ISO 27327-2:2014 - Fans -- Air curtain units -- Part 2: Laboratory methods of testing for sound
power
ISO 20643:2005 - Mechanical vibration -- Hand-held and hand-guided machinery -- Principles for
evaluation of vibration emission
ISO 2740:2009 - Sintered metal materials, excluding hardmetals -- Tensile test pieces
ISO 11873:2005 - Hardmetals -- Determination of sulfur and carbon contents in cobalt metal
powders -- Infrared detection method
ISO 23328-1:2003 - Breathing system filters for anaesthetic and respiratory use -- Part 1: Salt test
method to assess filtration performance
ISO 15750-1:2002 - Packaging -- Steel drums -- Part 1: Removable head (open head) drums with
a minimum total capacity of 208 l, 210 l and 216,5 l
ISO/TS 19709-2:2016 - Transport packaging -- Small load container systems -- Part 2: Column
Stackable System (CSS)
ISO 15750-2:2002 - Packaging -- Steel drums -- Part 2: Non-removable head (tight head) drums
with a minimum total capacity of 212 l, 216,5 l and 230 l
ISO 15750-3:2002 - Packaging -- Steel drums -- Part 3: Inserted flange-type closure systems
ISO 21898:2004 - Packaging -- Flexible intermediate bulk containers (FIBCs) for non-dangerous
goods
ISO 2206:1987 - Packaging -- Complete, filled transport packages -- Identification of parts when
testing
ISO 10531:1992 - Packaging -- Complete, filled transport packages -- Stability testing of unit
loads
ISO 16495:2013 - Packaging -- Transport packaging for dangerous goods -- Test methods
ISO 13274:2013 - Packaging -- Transport packaging for dangerous goods -- Plastics compatibility
testing for packaging and IBCs
ISO 4384-1:2019 - Plain bearings -- Hardness testing of bearing metals -- Part 1: Multilayer
bearings materials
ISO 22423:2019 - Foil bearings -- Performance testing of foil thrust bearings -- Testing of static
load capacity, bearing torque, friction coefficient and lifetime
ISO 12509:2004 - Earth-moving machinery -- Lighting, signalling and marking lights, and reflex-
reflector devices
ISO/TS 15311-1:2019 - Graphic technology -- Print quality requirements for printed matter -- Part
1: Measurement methods and reporting schema
ISO 20677:2019 - Image technology colour management -- Extensions to architecture, profile
format and data structure
ISO 7241:2014 - Hydraulic fluid power -- Dimensions and requirements of quick-action couplings
ISO/TS 11672:2016 - Connectors for fluid power and general use -- Designation and
nomenclature
ISO 11926-3:1995 - Connections for general use and fluid power -- Ports and stud ends with ISO
725 threads and O-ring sealing -- Part 3: Light-duty (L series) stud ends
ISO 11926-2:1995 - Connections for general use and fluid power -- Ports and stud ends with ISO
725 threads and O-ring sealing -- Part 2: Heavy-duty (S series) stud ends
ISO 11926-1:1995 - Connections for general use and fluid power -- Ports and stud ends with ISO
725 threads and O-ring sealing -- Part 1: Ports with O-ring seal in truncated housing
ISO 3939:1977 - Fluid power systems and components -- Multiple lip packing sets -- Methods for
measuring stack heights
ISO 16838:2019 - Non-destructive testing -- Acoustic emission testing -- Test method for
classification of active cracks in concrete structures
ISO 16837:2019 - Non-destructive testing -- Acoustic emission testing -- Test method for damage
qualification of reinforced concrete beams
ISO 7175-2:2019 - Furniture -- Children's cots and folding cots for domestic use -- Part 2: Test
methods
ISO 7175-1:2019 - Furniture -- Children's cots and folding cots for domestic use -- Part 1: Safety
requirements
ISO 7171:2019 - Furniture -- Storage units -- Test methods for the determination of stability
ISO/TC 138 - Plastics pipes, fittings and valves for the transport of fluids
ISO 4437-1:2014 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) --
Part 1: General
ISO 4437-5:2014 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) --
Part 5: Fitness for purpose of the system
ISO 4437-3:2014 - Plastics piping systems for the supply of gaseous fuels -- Polyethylene (PE) --
Part 3: Fittings
ISO 9311-1:2005 - Adhesives for thermoplastic piping systems -- Part 1: Determination of film
properties
ISO 6964:2019 - Polyolefin pipes and fittings -- Determination of carbon black content by
calcination and pyrolysis -- Test method
ISO 16871:2003 - Plastics piping and ducting systems -- Plastics pipes and fittings -- Method for
exposure to direct (natural) weathering
ISO 9311-3:2005 - Adhesives for thermoplastic piping systems -- Part 3: Test method for the
determination of resistance to internal pressure
ISO/TS 16479:2012 - Thermoplastics pipes for the conveyance of Fluids -- Determination of the
slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT)
ISO 13957:1997 - Plastics pipes and fittings -- Polyethylene (PE) tapping tees -- Test method for
impact resistance
ISO 13760:1998 - Plastics pipes for the conveyance of fluids under pressure -- Miner's rule --
Calculation method for cumulative damage
ISO 10952:2014 - Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes
and fittings -- Determination of the resistance to chemical attack for the inside of a section in a
deflected condition
ISO 10466:1997 - Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes
-- Test method to prove the resistance to initial ring deflection
ISO 18672-1:2009 - Plastics piping systems for non-pressure drainage and sewerage -- Polyester
resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints
ISO 7684:1997 - Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes --
Determination of the creep factor under dry conditions
ISO 29463-5:2011 - High-efficiency filters and filter media for removing particles in air -- Part 5:
Test method for filter elements
ISO 9186-1:2014 - Graphical symbols -- Test methods -- Part 1: Method for testing
comprehensibility
ISO 20712-3:2014 - Water safety signs and beach safety flags -- Part 3: Guidance for use
ISO 19926-1:2019 - Meteorology -- Weather radar -- Part 1: System performance and operation
ISO 16000-38:2019 - Indoor air -- Part 38: Determination of amines in indoor and test chamber air
-- Active sampling on samplers containing phosphoric acid impregnated filters
ISO 16017-2:2003 - Indoor, ambient and workplace air -- Sampling and analysis of volatile
organic compounds by sorbent tube/thermal desorption/capillary gas chromatography -- Part 2:
Diffusive sampling
ISO 16000-37:2019 - Indoor air -- Part 37: Measurement of PM2,5 mass concentration
ISO 16264:2002 - Water quality -- Determination of soluble silicates by flow analysis (FIA and
CFA) and photometric detection
ISO 17378-2:2014 - Water quality -- Determination of arsenic and antimony -- Part 2: Method
using hydride generation atomic absorption spectrometry (HG-AAS)
ISO/TS 21231:2019 - Water quality -- Characterization of analytical methods -- Guidelines for the
selection of a representative matrix
ISO 17378-1:2014 - Water quality -- Determination of arsenic and antimony -- Part 1: Method
using hydride generation atomic fluorescence spectrometry (HG-AFS)
ISO/TS 13530:2009 - Water quality -- Guidance on analytical quality control for chemical and
physicochemical water analysis
ISO 13166:2014 - Water quality -- Uranium isotopes -- Test method using alpha-spectrometry
ISO 10704:2019 - Water quality -- Gross alpha and gross beta activity -- Test method using thin
source deposit
ISO 17994:2014 - Water quality -- Requirements for the comparison of the relative recovery of
microorganisms by two quantitative methods
ISO 7346-3:1996 - Water quality -- Determination of the acute lethal toxicity of substances to a
freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] -- Part 3: Flow-
through method
ISO 16665:2014 - Water quality -- Guidelines for quantitative sampling and sample processing of
marine soft-bottom macrofauna
ISO 12891-2:2014 - Retrieval and analysis of surgical implants -- Part 2: Analysis of retrieved
surgical implants
ISO 8828:2014 - Implants for surgery -- Guidance on care and handling of orthopaedic implants
ISO 16428:2005 - Implants for surgery -- Test solutions and environmental conditions for static
and dynamic corrosion tests on implantable materials and medical devices
ISO 5832-14:2019 - Implants for surgery -- Metallic materials -- Part 14: Wrought titanium 15-
molybdenum 5-zirconium 3-aluminium alloy
ISO 5832-9:2019 - Implants for surgery -- Metallic materials -- Part 9: Wrought high nitrogen
stainless steel
ISO 5832-12:2019 - Implants for surgery -- Metallic materials -- Part 12: Wrought cobalt-
chromium-molybdenum alloy
ISO 5832-5:2005 - Implants for surgery -- Metallic materials -- Part 5: Wrought cobalt-chromium-
tungsten-nickel alloy
ISO 9583:1993 - Implants for surgery -- Non-destructive testing -- Liquid penetrant inspection of
metallic surgical implants
ISO 23500-3:2019 - Preparation and quality management of fluids for haemodialysis and related
therapies -- Part 3: Water for haemodialysis and related therapies
ISO 23500-4:2019 - Preparation and quality management of fluids for haemodialysis and related
therapies -- Part 4: Concentrates for haemodialysis and related therapies
ISO 23500-1:2019 - Preparation and quality management of fluids for haemodialysis and related
therapies -- Part 1: General requirements
ISO 23500-2:2019 - Preparation and quality management of fluids for haemodialysis and related
therapies -- Part 2: Water treatment equipment for haemodialysis applications and related
therapies
ISO 23500-5:2019 - Preparation and quality management of fluids for haemodialysis and related
therapies -- Part 5: Quality of dialysis fluid for haemodialysis and related therapies
ISO 14708-1:2014 - Implants for surgery -- Active implantable medical devices -- Part 1: General
requirements for safety, marking and for information to be provided by the manufacturer
ISO 6948:1981 - Automatic steam traps -- Production and performance characteristic tests
ISO 7841:1988 - Automatic steam traps -- Determination of steam loss -- Test methods
ISO 7842:1988 - Automatic steam traps -- Determination of discharge capacity -- Test methods
ISO/TC 154 - Processes, data elements and documents in commerce, industry and
administration
ISO 9735-8:2002 - Electronic data interchange for administration, commerce and transport
(EDIFACT) -- Application level syntax rules (Syntax version number: 4, Syntax release number:
1) -- Part 8: Associated data in EDI
ISO 9735-7:2002 - Electronic data interchange for administration, commerce and transport
(EDIFACT) -- Application level syntax rules (Syntax version number: 4, Syntax release number:
1) -- Part 7: Security rules for batch EDI (confidentiality)
ISO 9735:1988 - Electronic data interchange for administration, commerce and transport
(EDIFACT) -- Application level syntax rules
ISO 9735-6:2002 - Electronic data interchange for administration, commerce and transport
(EDIFACT) -- Application level syntax rules (Syntax version number: 4, Syntax release number:
1) -- Part 6: Secure authentication and acknowledgement message (message type - AUTACK)
ISO 8601-2:2019 - Date and time -- Representations for information interchange -- Part 2:
Extensions
ISO 9735-5:2002 - Electronic data interchange for administration, commerce and transport
(EDIFACT) -- Application level syntax rules (Syntax version number: 4, Syntax release number:
1) -- Part 5: Security rules for batch EDI (authenticity, integrity and non-repudiation of origin)
ISO 9735-4:2002 - Electronic data interchange for administration, commerce and transport
(EDIFACT) -- Application level syntax rules (Syntax version number: 4, Syntax release number:
1) -- Part 4: Syntax and service report message for batch EDI (message type -- CONTRL)
ISO 9735-3:2002 - Electronic data interchange for administration, commerce and transport
(EDIFACT) -- Application level syntax rules (Syntax version number: 4, Syntax release number:
1) -- Part 3: Syntax rules specific to interactive EDI
ISO 9735-2:2002 - Electronic data interchange for administration, commerce and transport
(EDIFACT) -- Application level syntax rules (Syntax version number: 4, Syntax release number:
1) -- Part 2: Syntax rules specific to batch EDI
ISO 9735-1:2002 - Electronic data interchange for administration, commerce and transport
(EDIFACT) -- Application level syntax rules (Syntax version number: 4, Syntax release number:
1) -- Part 1: Syntax rules common to all parts
ISO 8601-1:2019 - Date and time -- Representations for information interchange -- Part 1: Basic
rules
ISO 9735-9:2002 - Electronic data interchange for administration, commerce and transport
(EDIFACT) -- Application level syntax rules (Syntax version number: 4, Syntax release number:
1) -- Part 9: Security key and certificate management message (message type- KEYMAN)
ISO 15158:2014 - Corrosion of metals and alloys -- Method of measuring the pitting potential for
stainless steels by potentiodynamic control in sodium chloride solution
ISO 7539-9:2003 - Corrosion of metals and alloys -- Stress corrosion testing -- Part 9:
Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
ISO 17864:2005 - Corrosion of metals and alloys -- Determination of the critical pitting
temperature under potientiostatic control
ISO 7539-7:2005 - Corrosion of metals and alloys -- Stress corrosion testing -- Part 7: Method for
slow strain rate testing
ISO 14915-2:2003 - Software ergonomics for multimedia user interfaces -- Part 2: Multimedia
navigation and control
ISO/TC 161 - Controls and protective devices for gas and/or oil
ISO 23551-6:2014 - Safety and control devices for gas burners and gas-burning appliances --
Particular requirements -- Part 6: Thermoelectric flame supervision controls
ISO/TC 163 - Thermal performance and energy use in the built environment
ISO 29768:2008 - Thermal insulating products for building applications -- Determination of linear
dimensions of test specimens
ISO 29465:2008 - Thermal insulating products for building applications -- Determination of length
and width
ISO 29766:2008 - Thermal insulating products for building applications -- Determination of tensile
strength parallel to faces
ISO 18096:2013 - Thermal insulating products for building equipment and industrial installations -
- Determination of maximum service temperature for preformed pipe insulation
ISO 18097:2013 - Thermal insulating products for building equipment and industrial installations -
- Determination of maximum service temperature
ISO 29768:2008 - Thermal insulating products for building applications -- Determination of linear
dimensions of test specimens
ISO 29465:2008 - Thermal insulating products for building applications -- Determination of length
and width
ISO 29766:2008 - Thermal insulating products for building applications -- Determination of tensile
strength parallel to faces
ISO 18096:2013 - Thermal insulating products for building equipment and industrial installations -
- Determination of maximum service temperature for preformed pipe insulation
ISO 18097:2013 - Thermal insulating products for building equipment and industrial installations -
- Determination of maximum service temperature
ISO 8491:1998 - Metallic materials -- Tube (in full section) -- Bend test
ISO 6506-1:2014 - Metallic materials -- Brinell hardness test -- Part 1: Test method
ISO 6506-3:2014 - Metallic materials -- Brinell hardness test -- Part 3: Calibration of reference
blocks
ISO 6506-4:2014 - Metallic materials -- Brinell hardness test -- Part 4: Table of hardness values
ISO 4516:2002 - Metallic and other inorganic coatings -- Vickers and Knoop microhardness tests
ISO 8126:2019 - Micrographics -- Duplicating film, silver, diazo and vesicular -- Specifications and
measurement for visual density
ISO 12653-3:2014 - Electronic imaging -- Test target for scanning of office documents -- Part 3:
Test target for use in lower resolution applications
ISO 9358:1994 - Optics and optical instruments -- Veiling glare of image forming systems --
Definitions and methods of measurement
ISO 9022-4:2014 - Optics and photonics -- Environmental test methods -- Part 4: Salt mist
ISO 11884-2:2007 - Optics and photonics -- Minimum requirements for stereomicroscopes -- Part
2: High performance microscopes
ISO 11884-1:2006 - Optics and photonics -- Minimum requirements for stereomicroscopes -- Part
1: Stereomicroscopes for general use
ISO 8037-2:1997 - Optics and optical instruments -- Microscopes -- Slides -- Part 2: Quality of
material, standards of finish and mode of packaging
ISO 17123-1:2014 - Optics and optical instruments -- Field procedures for testing geodetic and
surveying instruments -- Part 1: Theory
ISO 12858-1:2014 - Optics and optical instruments -- Ancillary devices for geodetic instruments --
Part 1: Invar levelling staffs
ISO 12005:2003 - Lasers and laser-related equipment -- Test methods for laser beam parameters
-- Polarization
ISO 13696:2002 - Optics and optical instruments -- Test methods for radiation scattered by
optical components
ISO 11146-2:2005 - Lasers and laser-related equipment -- Test methods for laser beam widths,
divergence angles and beam propagation ratios -- Part 2: General astigmatic beams
ISO 11146-1:2005 - Lasers and laser-related equipment -- Test methods for laser beam widths,
divergence angles and beam propagation ratios -- Part 1: Stigmatic and simple astigmatic
beams
ISO 23599:2019 - Assistive products for blind and vision-impaired persons -- Tactile walking
surface indicators
ISO 16840-3:2014 - Wheelchair seating -- Part 3: Determination of static, impact and repetitive
load strengths for postural support devices
ISO 12505-1:2014 - Skin barrier for ostomy aids -- Test methods -- Part 1: Size, surface pH and
water-absorbency
ISO 8102-6:2019 - Electrical requirements for lifts, escalators and moving walks -- Part 6:
Programmable electronic systems in safety-related applications for escalators and moving walks
(PESSRAE)
ISO/TR 8124-9:2018 - Safety of toys -- Part 9: Safety aspects related to mechanical and physical
properties -- Comparison of ISO 8124-1, EN 71-1, and ASTM F963
ISO 22476-3:2005 - Geotechnical investigation and testing -- Field testing -- Part 3: Standard
penetration test
ISO 14649-1:2003 - Industrial automation systems and integration -- Physical device control --
Data model for computerized numerical controllers -- Part 1: Overview and fundamental principles
ISO 14649-121:2005 - Industrial automation systems and integration -- Physical device control --
Data model for computerized numerical controllers -- Part 121: Tools for turning machines
ISO 14649-11:2004 - Industrial automation systems and integration -- Physical device control --
Data model for computerized numerical controllers -- Part 11: Process data for milling
ISO 14649-10:2004 - Industrial automation systems and integration -- Physical device control --
Data model for computerized numerical controllers -- Part 10: General process data
ISO 13584-101:2003 - Industrial automation systems and integration -- Parts library -- Part 101:
Geometrical view exchange protocol by parametric program
ISO 18828-5:2019 - Industrial automation systems and integration -- Standardized procedures for
production systems engineering -- Part 5: Manufacturing change management
ISO 22400-2:2014 - Automation systems and integration -- Key performance indicators (KPIs) for
manufacturing operations management -- Part 2: Definitions and descriptions
ISO 10545-4:2019 - Ceramic tiles -- Part 4: Determination of modulus of rupture and breaking
strength
ISO 11275:2004 - Soil quality -- Determination of unsaturated hydraulic conductivity and water-
retention characteristic -- Wind's evaporation method
ISO 16586:2003 - Soil quality -- Determination of soil water content as a volume fraction on the
basis of known dry bulk density -- Gravimetric method
ISO/TS 14256-1:2003 - Soil quality -- Determination of nitrate, nitrite and ammonium in field-moist
soils by extraction with potassium chloride solution -- Part 1: Manual method
ISO 11916-2:2013 - Soil quality -- Determination of selected explosives and related compounds --
Part 2: Method using gas chromatography (GC) with electron capture detection (ECD) or mass
spectrometric detection (MS)
ISO 11916-1:2013 - Soil quality -- Determination of selected explosives and related compounds --
Part 1: Method using high-performance liquid chromatography (HPLC) with ultraviolet detection
ISO 13859:2014 - Soil quality -- Determination of polycyclic aromatic hydrocarbons (PAH) by gas
chromatography (GC) and high performance liquid chromatography (HPLC)
ISO 21286:2019 - Soil quality -- Identification of ecotoxicological test species by DNA barcoding
ISO 29200:2013 - Soil quality -- Assessment of genotoxic effects on higher plants -- Vicia faba
micronucleus test
ISO 23611-4:2007 - Soil quality -- Sampling of soil invertebrates -- Part 4: Sampling, extraction
and identification of soil-inhabiting nematodes
ISO 11607-2:2019 - Packaging for terminally sterilized medical devices -- Part 2: Validation
requirements for forming, sealing and assembly processes
ISO 11607-1:2019 - Packaging for terminally sterilized medical devices -- Part 1: Requirements
for materials, sterile barrier systems and packaging systems
ISO Guide 78:2012 - Safety of machinery -- Rules for drafting and presentation of safety
standards
ISO 18516:2019 - Surface chemical analysis -- Determination of lateral resolution and sharpness
in beam based methods with a range from nanometres to micrometres
ISO 16531:2013 - Surface chemical analysis -- Depth profiling -- Methods for ion beam alignment
and the associated measurement of current or current density for depth profiling in AES and XPS
ISO 20903:2019 - Surface chemical analysis -- Auger electron spectroscopy and X-ray
photoelectron spectroscopy -- Methods used to determine peak intensities and information
required when reporting results
ISO 21217:2014 - Intelligent transport systems -- Communications access for land mobiles
(CALM) -- Architecture
ISO 17185-1:2014 - Intelligent transport systems -- Public transport user information -- Part 1:
Standards framework for public information systems
ISO/TS 21219-9:2016 - Intelligent transport systems -- Traffic and travel information (TTI) via
transport protocol experts group, generation 2 (TPEG2) -- Part 9: Service and network
information (TPEG2-SNI)
ISO 20035:2019 - Intelligent transport systems -- Cooperative adaptive cruise control systems
(CACC) -- Performance requirements and test procedures
ISO 12855:2015 - Electronic fee collection -- Information exchange between service provision
and toll charging
ISO 24100:2010 - Intelligent transport systems -- Basic principles for personal data protection in
probe vehicle information services
ISO/TS 14907-1:2015 - Electronic fee collection -- Test procedures for user and fixed equipment -
- Part 1: Description of test procedures
ISO 24531:2013 - Intelligent transport systems -- System architecture, taxonomy and terminology
-- Using XML in ITS standards, data registries and data dictionaries
ISO 14827-3:2019 - Transport information and control systems -- Data interfaces between
centres for transport information and control systems -- Part 3: Data interfaces between centres
for intelligent transport sytems (ITS) using XML (Profile A)
ISO 16814:2008 - Building environment design -- Indoor air quality -- Methods of expressing the
quality of indoor air for human occupancy
ISO 23045:2008 - Building environment design -- Guidelines to assess energy efficiency of new
buildings
ISO 16484-3:2005 - Building automation and control systems (BACS) -- Part 3: Functions
ISO/TC 206 - Fine ceramics
ISO 17161:2014 - Fine ceramics (advanced ceramics, advanced technical ceramics) -- Ceramic
composites -- Determination of the degree of misalignment in uniaxial mechanical tests
ISO 21814:2019 - Fine ceramics (advanced ceramics, advanced technical ceramics) -- Methods
for chemical analysis of aluminium nitride powders
ISO 21813:2019 - Fine ceramics (advanced ceramics, advanced technical ceramics) -- Methods
for chemical analysis of high purity barium titanate powders
ISO/TC 210 – Quality management and corresponding general aspects for medical devices
ISO/TS 19218-1:2011 - Medical devices -- Hierarchical coding structure for adverse events -- Part
1: Event-type codes
ISO/TS 19218-2:2012 - Medical devices -- Hierarchical coding structure for adverse events -- Part
2: Evaluation codes
ISO 19153:2014 - Geospatial Digital Rights Management Reference Model (GeoDRM RM)
ISO 19111:2019 - Geographic information -- Referencing by coordinates
ISO 19115-2:2019 - Geographic information -- Metadata -- Part 2: Extensions for acquisition and
processing
ISO/TS 19163-1:2016 - Geographic information -- Content components and encoding rules for
imagery and gridded data -- Part 1: Content model
ISO/TC 212 - Clinical laboratory testing and in vitro diagnostic test systems
ISO 25178-70:2014 - Geometrical product specification (GPS) -- Surface texture: Areal -- Part 70:
Material measures
ISO 25178-605:2014 - Geometrical product specifications (GPS) -- Surface texture: Areal -- Part
605: Nominal characteristics of non-contact (point autofocus probe) instruments
ISO 21549-3:2014 - Health informatics -- Patient healthcard data -- Part 3: Limited clinical data
ISO 21549-2:2014 - Health informatics -- Patient healthcard data -- Part 2: Common objects
ISO 21549-4:2014 - Health informatics -- Patient healthcard data -- Part 4: Extended clinical data
ISO 20150:2019 - Footwear and footwear components -- Quantitative challenge test method to
assess antifungal activity
ISO 17693:2004 - Footwear -- Test methods for uppers -- Resistance to damage on lasting
ISO 17696:2004 - Footwear -- Test methods for uppers, linings and insocks -- Tear strength
ISO 17699:2003 - Footwear -- Test methods for uppers and lining -- Water vapour permeability
and absorption
ISO 17704:2004 - Footwear -- Test methods for uppers, linings and insocks -- Abrasion
resistance
ISO/TC 224 - Service activities relating to drinking water supply, wastewater and
stormwater systems
ISO/TS 24522:2019 - Event detection process: Guidelines for water and wastewater utilities
ISO/TR 24524:2019 - Service activities relating to drinking water supply, wastewater and
stormwater systems -- Hydraulic, mechanical and environmental conditions in wastewater
transport systems
ISO 20252:2019 - Market, opinion and social research, including insights and data analytics --
Vocabulary and service requirements
ISO 18142:2014 - Carbonaceous materials for the production of primary aluminium -- Baked
carbon bodies -- Determination of the dynamic elasticity modulus by the resonance method
ISO 14785:2014 - Tourist information offices -- Tourist information and reception services --
Requirements
ISO 24802-2:2014 - Recreational diving services -- Requirements for the training of scuba
instructors -- Part 2: Level 2
ISO 24802-1:2014 - Recreational diving services -- Requirements for the training of scuba
instructors -- Part 1: Level 1
ISO 24801-3:2014 - Recreational diving services -- Requirements for the training of recreational
scuba divers -- Part 3: Level 3 -- Dive leader
ISO 24801-2:2014 - Recreational diving services -- Requirements for the training of recreational
scuba divers -- Part 2: Level 2 -- Autonomous diver
ISO 24801-1:2014 - Recreational diving services -- Requirements for the training of recreational
scuba divers -- Part 1: Level 1 -- Supervised diver
ISO 21314:2019 - Traditional Chinese medicine -- Salvia miltiorrhiza root and rhizome
ISO 787-10:1993 - General methods of test for pigments and extenders -- Part 10: Determination
of density -- Pyknometer method
ISO 787-18:1983 - General methods of test for pigments and extenders -- Part 18: Determination
of residue on sieve -- Mechanical flushing procedure
ISO 787-11:1981 - General methods of test for pigments and extenders -- Part 11: Determination
of tamped volume and apparent density after tamping
ISO 787-1:1982 - General methods of test for pigments and extenders -- Part 1: Comparison of
colour of pigments
ISO 787-19:1974 - General methods of test for pigments -- Part 19: Determination of water-
soluble nitrates (Salicylic acid method)
ISO 787-2:1981 - General methods of test for pigments and extenders -- Part 2: Determination of
matter volatile at 105 degrees C
ISO 787-14:2019 - General methods of test for pigments and extenders -- Part 14: Determination
of resistivity of aqueous extract
ISO 787-9:2019 - General methods of test for pigments and extenders -- Part 9: Determination of
pH value an aqueous suspension
ISO 787-4:1981 - General methods of test for pigments and extenders -- Part 4: Determination of
acidity or alkalinity of the aqueous extract
ISO 787-25:2019 - General methods of test for pigments and extenders -- Part 25: Comparison of
the colour, in full-shade systems, of white, black and coloured pigments -- Colorimetric method
ISO 27916:2019 - Carbon dioxide capture, transportation and geological storage -- Carbon
dioxide storage using enhanced oil recovery (CO2-EOR)
ISO 12856-1:2014 - Plastics -- Plastic railway sleepers for railway applications (railroad ties) --
Part 1: Material characteristics
ISO 56003:2019 - Innovation management -- Tools and methods for innovation partnership --
Guidance
ISO 28004-3:2014 - Security management systems for the supply chain -- Guidelines for the
implementation of ISO 28000 -- Part 3: Additional specific guidance for adopting ISO 28000 for
use by medium and small businesses (other than marine ports)
ISO 28004-4:2014 - Security management systems for the supply chain -- Guidelines for the
implementation of ISO 28000 -- Part 4: Additional specific guidance on implementing ISO 28000 if
compliance with ISO 28001 is a management objective
ISO 13482:2014 - Robots and robotic devices -- Safety requirements for personal care robots
ISO 50021:2019 - Energy management and energy savings -- General guidelines for selecting
energy savings evaluators