Professional Documents
Culture Documents
BASS-218
audiovias.com
Features
INTRODUCTION SPECIFICATIONS
The D.A.S. BASS-218 is a high
efficiency low frequency unit for use in RMS (Average) Power HandlingR: 1000 W
active systems. Programme Power HandlingP: 2000 W
Peak Power HandlingK: >4000 W
APPLICATIONS On-axis Frequency ResponseF: 40 - 500 Hz
Intended for applications where very
high bass levels are in order, such as Nominal Impedance: 4W
discos and fixed installations or indoor Minimum ImpedanceI: 3.5 W (@ 70 Hz)
and outdoor live sound reinforcement On-axis Sensitivity 2V/1 mS: 105 dB SPL
for touring bands and hire companies. Nominal -6 dB BeamwidthsB: 360° Horizontal
(100 Hz) 360° Vertical
DESCRIPTION
Enclosure Material: Plywood
The BASS-218 houses two D.A.S. G-45
18" woofers. These are long excursion Colour: D.A.S. grey
cone drivers featuring 4" coils, massive Transducer Complement: D.A.S. G-45 18" speaker
magnetic circuitries, and carefully Replacement Parts: GM G-45
engineered venting schemes, resulting Options: Left (drawn) or right (pictured) version
in high power handling and low power Input Connection: 2 paralleled Speakon
compression. The two speakers are wired to (+1, -1)
arranged on a folded-horn structure,
Dimensions (H x W x D): 104 x 70 x 83 cm
resulting in a very aggressive and
turbulent bass sound. 41 x 28 x 33 in
Weight: 71.5 Kg
The cabinet is built out of composite (158 lbs)
plywood and is heavily braced for Shipping Weight: 80 Kg
minimum structural vibration. The (175 lbs)
components are protected by steel
grilles and removable filter foam sheets. R Corresponds to the AES power handling rating for the
speakers, based on a 2 hour test using a 6 dB crest factor
bandlimited pink noise signal.
Casters are incorporated at the back for P Conventionally 3 dB higher than the RMS measure,
ease of transport. although this already utilizes a programme signal.
104 cm
SPL in dB
85
FIG. 1
1W (2V) swept sine signal.
80
Impedance
Figure 2 shows impedance with frequency. 70
60
Distortion
Figure 3 shows the Total Harmonic Distortion frequency in Hz
impedance in
10% of its nominal power handling rating
FIG. 2
(100W @ 4W).
Beamwidth
Figure 4 shows the -3, -6 and -10 dB
horizontal (solid) and vertical (dashed) frequency in Hz
beamwidth with frequency curves. -6 dB ones
are shown with thicker traces for clarity.
distortion in dB
Axial Directivity Q(Rq) and Di
Figure 5 shows the above characteristics with
FIG. 3
frequency.
Polar Response
Figure 6 shows the one octave band
horizontal (solid) and vertical (dashed) polars
for the indicated frequencies. Full scale is 50 frequency in Hz
dB, 5 dB per division.
beamwidth in degrees
frequency in Hz
10 dB
270° 90° 270° 90° 270° 90° 270° 90°
Islas Baleares, 24 - Pol. Ind. fuente del Jarro - 46988 PATERNA (Valencia), SPAIN