You are on page 1of 10
ISO 17025 Accredited Fan Calibration Certificate fretrony Issued by: Retrotec Certificate Number: 606441025 Calibration Date: 2017-10-04 Results: As Left Calibration laboratory: Retrotec 11060 East Pole Rd. Everson, WA, USA 98247 +1 (360) 738-9835 calibration@retrotec.com www.fetrotec.com ‘AG-1643 “This caltration laboratory has been assessed bythe ANSIASQ National Acreitation Board end meets the requirements of intermational standard ISO/IEC 17025:2005. al pressure and flow devices sedi this calloation ar raceable co the Walon istute of Standards and Technolgy. Depion Team ‘Manufacturer: Retrotec Calibrated By: Model Number: 6000 =e Se Shes Nuec Sposa SI AETE ineVouge atovae ev Seats ‘Mains Frequency: SOHz #1Hz Reference Flow: Nozzle Chamber, in accordance with ANSV/AMCA 210-07: Nozzles #2, #4, #5, #6 ~8" diameter Nozzles #1, #3 7° diameter Nozzle #7 —6" diameter Nozzle #8 ~4" diameter, Nozzle #9 — 3° diameter Chamber Pressure measured on: | DM-32 Gauge Serial number 401973-A, Device’s Fan Pressure measured on: DM-32 Gauge Serial number 402091-B Nozzle Wall Pressure measured on: DM-32 Gauge Serial number 402091- Laminar Flow Elements (LFE) Chamber: LFEH2, Model SOMC2-4LHL, Serial number 712110-A3, on DM32 Gauge Serial number 405308-B EHS, Model SOMC2-2LHL, Serial number 712110-A2, on DM32 Gauge Serial number 401969-A LFEN4, Model SOMH10-2, Serial number 712110-A4, on DM32 Gauge Serial number 401969-8 Chamber Pressure measured on: DM-32 Gauge Serial number 402118-A Device’s Fan Pressure measured on: DM-32 Gauge Serial number 402118-B Calibration information: “The Device was calibrated against laboratory standards whose values are traceable to recognized national standards. The results and uncertainty limits refer to the measured values only, with no account being taken of the instrument's ability to ‘maintain its calibration. The reported expanded uncertainty is based on a standard uncertainty multiplied by a coverage factor k=2, providing a level of confidence of approximately 95%. The uncertainty evaluation has been carried out in accordance with ANSI/ISO/IEC 17025:2005 requirements. Calibration Procedure: Procedure ID No. CP-CHB-01 ‘This Calibration Certificate shall not be reproduced except in fll, without written approval from Retrotec vage Lora ISO 17025 Accredited Fan Calibration Certificate Issued by: Retrotec Calibration Date: 2017-10-04 Calibration Results: Start of calibration: Barometric pressure= 101.4 kPa, Temperature= 21.0°C, Humidty= 57.8% End of calibration: Barometric pressure= 101.4 ka, Temperatures 22.5°C, Humidty= 55.28 Flow rates are corrected to STP conditions of 20°, 101.325 Pa and SOX. RM. Certificate Number: 606441025 Results: As Left From Flow Chamber Reference Test Fan being Calibrated Chamber] Bacaround | Nowies Used | Nome | ToulSt® | Range] Fan | — Fan oF sP|eror Pressure | leakage wal | Flow, | config | speed | Pressure, | flow, | Flow, | er, pressure, ation °: cM Pe con re | om mifh 23.6 | sa6 428.0 | 7330 [open | 00% | 193.0 | 7453 | 12662 298 | 539 1745 | 4670 | Oven | sow | 75.1 | 4058 | 7914 30.8 | 533 34.2 | 2058 | Oven | 17 | 13.8 | 2003 | 3408 30.7 | 532 596.0 | 4532 | Ring | 100% | 242.0 | 4056 | 7508 303 | 526 237.0 | 2853 | Ringa | 40% | 96.7 | 2018 | 4737 30.2 [525 535 | 1353 | rings | t6% | 21.3 | is19 | 2202 30.3 | 526 6165 | 2695 | es [sox [3685 | 2s | 4529 30.0 | s22 227.0 |_ 1634 |e | ox | 145.5 | 1649 | 2802 299 | 520 678 | e932 | ee | tow | 44.3 | 067.7 | 1674 295 [545 637.0 |_1237_| 64 | 100| 3835 | 1219 | 2071 29.9 [520 7 2385 [7586 [ 4 | am | 1515 | 100 | 1257 30.7 | 532 aa | 1140 | 3663 | ea | ame | age | s769 | aoa 30.0 | 522 8 | 587.0 | 5323 | sz | 100% | 3865 | sz24 | ears 295 | 535 8 2295 | 3353 | 62 | aox | 163.0 | 3275 | ss6a 308 | 533 2 3450 | ass2 | e2 [am | soa | 1573 | 2673 305 | 529 2 497.0 | 2798 [ei | 100% | 3875 | 271 | as06 295 | 515 8 1980 | ies [ei [am [1720 | 1741 | 2958 30.7 | 532 9 59.3 | 102s |e: | 20%] 663 | 1m9 | 178 | 0.4% (Glibration and measurement capability (Expanded Uncerainny)is 35% of eadng, Based on 3 95% confidence interval using a coverage af 2 From Flow Chamber Reference ‘Test Fan being Calibrated Chanter | Bekaround | UEUsed | ire] Taaisve Fan] fan TF 3] eror Pressure | latage pressure, | flow. speed | presure, | flow, | Flow, ate, cM a com ms om wh 0.037 2 2345 | asia | ora | 100%] 422.0 | 1552 | 2037 | 2.6% 0.087 2 148.0 [ssa | e7 | aow | 190.0 | 964 | 2637 | 2.0% (0.037 2 592 | 372 | em [as | 376 | 377 e410 | 1.2% 0.037 3 4575 [70s | a7 | 100% | 4275 [703 | 1195 | -0.2% 0.037 3 265 | 2 | _ea7 | sow | 1805 | 450 765__| 1.8% 0.037 3 158.0 | 23 | ea7 [am] saa | ma | as | 05% 0.037 4 1255 [262 | 629 [100% [aas.0 | 254 332__|-2.9% 0.037 4 798.5 [167 | 629 | dow | 1880 | a7 21 _| 23% 30.5 | _0037 a 4165 [| 897 | 629 | 16% | 55.4 | 907 13a | 1.1% Gilbraton ard measurement capabilty [Expanded Uncertainty] 1.2% of reading, based on & 95% confidence terval, sing a Coverage of Q Page 2 of 4 ISO 17025 Accredited Fan Calibration Certificate Issued by: Retrotec Certificate Number: 606441025 Calibration Date: 2017-10-04 Results: As Left Published Flow Equation Parameters: Tange | SaTaanber | WK] win nan Configuration exponent | constant, mth mf Som amen “cas [ set | sie ten | S006 Ts | oar | ae 8 oe | BOOE ooe | ae | ne os Flow, CFM = P** K Where P= Fan Pressure, in ascas Range Seal] a] f a > © | Minimum —[~ Maximum Configuration | number flow, flow, mh mh 30252 at ‘3PHe00saA- 8 | 07] o.0.0662| 0.007 | 475 | 205 | sax. 2071 82 Se 2075 3875 8 40} o8s| 0.000003 | _-0.0037| __22| 49 81 sehen 1332 4606 8 6s] 02] o.0000106 | _-o.001382 | osesir | 38.5, 78 1087253 | 25 | 014s | o.cov000796 | -o.ooossox | ose | 1a | 68.9 2637 ea 1087567 | 25 | 009} 2

You might also like