Professional Documents
Culture Documents
TM-30Z-5-03117/TA-02
DATE June, 2010
MODEL : TM-ZE306HRS
CRANE SPECIFICATIONS
1
SPEC. SHEET No. TM-30Z-5-03117/TA-02
NOTE : Operating speeds of the crane are guaranteed under the condition that the pump delivery
is 60 L/min.
2
SPEC. SHEET No. TM-30Z-5-03117/TA-02
RATED LIFTING CAPACITIES IN KILOGRAMS
Crane Strength Rated Capacities
3.65 m / 5.87 m 8.07 m 10.2 m 12.4 m 14.6 m
Boom Boom Boom Boom Boom
Load Load Extension Load Extension Load Extension Load Extension
Extension width
Radius Radius width of Radius width of Radius width of Radius width of
of outriggers outriggers outriggers outriggers outriggers
Full Minimum Full Full Full Full
2.3 m 2.7 m 4.0 m 5.0 m 4.9 m
and below 3,030 1,380 and below 2,330 and below 1,030 and below 700 and below 400
2.5 m 2,830 1,230 3.0 m 2,130 5.0 m 880 6.0 m 580 6.0 m 360
3.0 m 2,380 880 3.5 m 1,880 6.0 m 730 7.0 m 500 7.0 m 330
3.5 m 1,980 680 4.0 m 1,630 7.0 m 630 8.0 m 430 8.0 m 300
4.0 m 1,680 530 4.5 m 1,450 8.0 m 580 9.0 m 380 9.0 m 280
4.5 m 1,450 430 5.0 m 1,280 9.0 m 510 10.0 m 330 10.0m 260
5.0 m 1,280 330 5.5 m 1,130 10.05m 480 11.0 m 300 11.0m 240
5.67m 1,080 280 6.0 m 1,000 12.22m 280 12.0m 220
6.5 m 880 13.0m 200
7.0 m 800 14.4m 180
7.87m 680
NOTES : 1. The mass of hook block (30kg), slings and all similarly used load handling
devices must be added to the mass of the load.
2. The above numerical values of total rated loads are based on crane strength
only. The total rated loads based on stability may lower than those in the
above table depending on the loading conditions and the types of the chassis.
Table D
3.65 m / 5.87 m 8.07 m 10.2 m 12.4 m 14.6 m
Boom Boom Boom Boom Boom
Load Load Extension Load Extension Load Extension Load Extension
Extension width
Radius Radius width of Radius width of Radius width of Radius width of
of outriggers outriggers outriggers outriggers outriggers
Full Minimum Full Full Full Full
2.3 m 2.7 m 4.0 m 5.0 m 4.9 m
3,030 1,380 2,330 1,030 700 400
and below and below and below and below and below
2.5 m 2,830 1,230 3.0 m 2,130 5.0 m 880 6.0 m 580 6.0 m 360
3.0 m 2,380 880 3.5 m 1,880 6.0 m 730 7.0 m 500 7.0 m 330
3.5 m 1,980 680 4.0 m 1,630 7.0 m 630 8.0 m 430 8.0 m 300
4.0 m 1,680 530 4.5 m 1,450 8.0 m 580 9.0 m 380 9.0 m 280
4.5 m 1,450 430 5.0 m 1,280 9.0 m 510 10.0 m 330 10.0m 260
5.0 m 1,280 330 5.5 m 1,130 10.05m 480 11.0 m 300 11.0m 240
5.67m 1,080 280 6.0 m 1,000 12.22m 280 12.0m 220
6.5 m 880 13.0m 200
7.0 m 800 14.4m 180
7.87m 680
NOTES : 1. Empty Chassis Rated Capacities in these tables depend on condition that
crane is set level on firm level ground.
2. The mass of hook block (30 kg), slings and all similarly used load handling
devices must be added to the mass of load.
3. For boom lengths not shown, use the rated lifting capacity of next longer boom.
4. When outriggers are extended to middle extension width, use the rated lifting
capacities for outriggers are extended to minimum extension width .
5. For boom lengths longer than 5.87m, extend outriggers to full extension width.
6. When the boom length is 10.2 m, a half of the first mark on lateral face of
the 4th boom section is exposed out of the 3rd boom section.
7. When the boom length is 12.4 m, a half of the second mark on lateral
face of the 4th boom section is exposed out of the 3rd boom section.
8. Empty Chassis Rated Capacities table A ,C and D depend on the types of
chassis.
9. Empty Chassis Rated Capacities are shown for over-side areas and over-rear
area. These capacities for over-front area may lowered depending on the
types of chassis.
4
SPEC. SHEET No. TM-30Z-5-03117/TA-02
WORKING RANGE
NOTE:
The above lifting heights and boom angles are based on a
straight (unladen) boom, and allowance should be made for
boom deflection obtained under laden conditions.
5
SPEC. SHEET No. TM-30Z-5-03117/TA-02
DIMENSIONS