Professional Documents
Culture Documents
5 1/2"
1/2"
1 1/2"
1'-8"
5 1/2" 5 1/2"
1'-11"
1'-11"
1/2"
1'-10"
1 1/2"
5 1/2" 5 1/2"
1'-3 1/2"
1'-2"
1/2” 1/2" 1/2"
6 1/2"
8"
1 1/2" 1 1/2"
1'-9"
Front Side
1'-5"
2'-7 1/2"
2'-8"
2'-8"
1/2"
2'-0"
1/2" 1/2"
Top Bottom
Scale (at P4) Drawn By: Project: Description:
1:10 RB 3 Step Stool Overview 2
Tread Section
Tread Support
Tread Support
Tread Section
Tread Support
Tread Support
Tread Section
Side Section
Tread Support
Side Section
3/4" 3/4"
1" 1"
2. Add wood glue or construction adhesive for the added strength to all joints.
3. With 2 1/2” or 3” Screws attach the back brace using 2 per side into the sides.
4. Fill holes and paint the stair support.
5. Stain the stair treads on all sides before installation.
With 2 1/2” screws attach the treads to the tread supports using 4 screws per tread, 2 on each side of each stair tread.
6.
(Screw from underneath to hide screws)
7. For added strength add screws on an angle through the back brace up into the top stair tread
Materials
Catagory Qty Dimensions Lengths Notes
Side Pieces 2 5 ½” - 1 ½” 6 ½”
2 5” - 1 ½” 6 ½”
2 5 ½” - 1 ½” 1’ - 2”
2 5” - 1 ½” 1’ - 2”
2 5 ½” - 1 ½” 1’ - 10”
2 5” - 1 ½” 1’ - 10”
Treads 6 5 ½” - 1 ½” 2’
Braces 1 5 ½” - 1 ½” 1’ - 8”
Tread Supports 2 1 ½” - 1 ½” 9”
2 1 ½” - 1 ½” 1'-9"
2 1 ½” - 1 ½” 2'-7 1/2"
NOTE: The dimensions listed here are finished dimensions. Extra length and thickness should be added when calculating the material needed.
**Every effort was made to provide accurate dimensions. I am not responsible for any errors or omissions. Verify all dimensions before cutting.**