Professional Documents
Culture Documents
Reduced Pressure Wiper Arm: John Deere Harvester Works H176776 (31JUL00)
Reduced Pressure Wiper Arm: John Deere Harvester Works H176776 (31JUL00)
WiperAQX995545
Arm
INSTALLATION
INSTRUCTIONS
H176776-19-31JUL00
Installation Instructions
–UN–11MAY99
3. Tape both lower blades to glass.
A—Safety Stops
H57078
AG,OUO1073,433 –19–10MAY00–1/12
4. Remove lock nuts (A) and (B) and cross bracket from
arm.
A—Lock Nut
–UN–01JUN00
B—Lock Nut
H63879
AG,OUO1073,433 –19–10MAY00–2/12
6. Remove loading pin (A) from new wiper arm and install
into old arm to relieve spring tension.
A—Pin
–UN–01JUN00
H64110
AG,OUO1073,433 –19–10MAY00–3/12
A—Nut
–UN–01JUN00
H64118
A—Nut
–UN–01JUN00
H63880
AG,OUO1073,433 –19–10MAY00–5/12
A—Knurled Driver
–UN–01JUN00
H64111
AG,OUO1073,433 –19–10MAY00–6/12
–UN–30MAR00
H63271
AG,OUO1073,433 –19–10MAY00–7/12
13. Remove loading pin from old arm and install into new
arm. Install new wiper arm and nut (A) on re-indexed
pivot shaft. Tighten nut to specification.
Specification
Wiper Arm Nut Torque ................................................................... 18 N•m
–UN–01JUN00
14. Remove loading pin from wiper arm and rotate over
to guide lever assembly.
H64119
A—Nut
AG,OUO1073,433 –19–10MAY00–9/12
15. Install cross bracket and tighten nuts (A) and (B).
A—Lock Nut
B—Lock Nut
–UN–01JUN00
H63879
AG,OUO1073,433 –19–10MAY00–10/12
A—Nut
–UN–01JUN00
H64118
17. Remove tape from blades and rotate pivot crank back
to 6 o’clock position and re-install coupler to crank.
–UN–01JUN00
A—Pivot Crank
H64120
AG,OUO1073,433 –19–10MAY00–12/12