Professional Documents
Culture Documents
Juniper
JN0-103 Exam
Juniper Junos, Associate Exam
http://www.justcerts.com
Questions & Answers PDF P-2
You issue a "request system zeroize" command. Which statement is correct in this scenario?
A. All data files remain unchanged but all configuration settings returned to factory defaults.
B. All data files are deleted and all configuration settings are returned to factory defaults.
C. All data files are deleted and all configuration settings remain unchanged
D. Disk space is freed by rotating log files and a proposed list of files to be deleted is presented.
Answer: B
Question: 2
A. Active and inactive routes are available for export from the routing table.
B. A routing policy allows you to control the flow of information into the routing table.
C. Routing policy are used to choose which routes are sent to neighbors using dynamic routing
Protocols
D. Attribute changes applied to export policies always affect the local routing table
Answer: BC
Question: 3
Which two features are implemented on the Packet Forwarding Engine? (Choose Two)
A. Chassis Management
B. Firewall Filters
C. Class of Service
D. Routing protocol update
Answer: BC
http://www.justcerts.com
Questions & Answers PDF P-3
Question: 4
What is minimum configuration required for a Junos device to respond to SNMP requests?
Answer: C
Question: 5
You have entered the command "show log messages | match "error | kernel | panic" which
statement
is correct regarding the keywords error, kernel and panic in the output?
A. the output messages will contain all messages from the file except the ones that contain all
three defined keywords.
B. the output messages will contain all messages from the file that contains all three defined
Keywords
C. the output messages will contain all messages from the file that contains at least one of
the three defined keywords
D. the output messages will contain all messages from the file except the ones that contains at least
one of the three defined keywords
Answer: B
Question: 6
http://www.justcerts.com
Questions & Answers PDF P-4
what happens when ping packets are sent to management interface address
of the local router?
Answer: D
Question: 7
Which two statements are true about static routes in the Junos OS (Choose Two)
A. Static routes remain in the routing table until you remove them or until they become inactive
B. Static routes are learned by neighboring devices and added to their routing tables
C. Static routes are defined at the [edit routing-instance] hierarchy
D. Static routes must have next hop defined
http://www.justcerts.com
Questions & Answers PDF P-5
Answer: AD
Question: 8
A Junos device is configured with multiple routing protocols to the same destination prefix.
By Default, which route will be active in the forwarding table?
A. A static route
B. An OSPF route
C. An IS-IS route
D. A BGP route
Answer: A
Question: 9
How would you change the display so that 40 lines will be displayed in the terminal program
when you are logged into a junos device?
Answer: B
Question: 10
A. Inet.3
B. Inet.0
C. Inet.1
D. Inet.2
Answer: C
Question: 11
http://www.justcerts.com
Questions & Answers PDF P-6
A. Ge-0/0/0
B. Et-3/0/0:0.501
C. Et-7/1/4:0
D. Xe-10/2/1
Answer: AD
Question: 12
Which two platforms are supposed in both physical and virtual form factors? Choose TWO
A. NFX Series
B. ACX Series
C. SRX Series
D. MX Series
Answer: CD
Question: 13
Exhibit:
http://www.justcerts.com
Questions & Answers PDF P-7
Answer: B
Question: 14
What does the output of the show route forwarding-table command display?
Answer: D
Question: 15
You are troubleshooting an issue and want to monitor syslog in real time. Which
operational command accomplish this task?
Answer: D
Question: 16
Refer to Exhibit:
Which parameter at the end of the command would provide information for troubleshooting
pusposes?
A. No-timestamp
B. Extensive
C. Print-ascii
D. No-resolve
Answer: B
http://www.justcerts.com
Questions & Answers PDF P-8
Question: 17
A. Ge-0/0/0
B. Ge-0/0/2
C. Ge-0/0/2.0
D. Ge-0/0/1.0
Answer: C
Question: 18
Answer: D
Question: 19
http://www.justcerts.com
Questions & Answers PDF P-9
Exhibit:
Answer: B
Question: 20
Exhibit:
http://www.justcerts.com
Questions & Answers PDF P-10
Answer: D
Question: 21
Answer: AD
http://www.justcerts.com
Questions & Answers PDF P-11
Question: 22
Answer: A
Question: 23
You are connected to your Junos device using an SSH connection to the txp0 interface. No other
interfaces are currently configured and unreachable from your management network. How would
you reestablish communication with the device?
Answer: D
Question: 24
Your firewall filters are not in the correct order, what would solve this problem?
Answer: D
Question: 25
You are considering to upgrade from 19.1R1 and want to ensure that only bug fixes are
included. Which two software versions should you use in the current situation? Choose Two
A. 19.3R2
B. 19.1R3
http://www.justcerts.com
Questions & Answers PDF P-12
C. 19.1R1-S2
D. 19.3R1-S1
Answer: BC
Question: 26
***Exhibit is Missing***
What does the number inside the square bracket represent?
A. Metric
B. Local preference
C. Protocol reference number
D. Route preference
Answer: D
Question: 27
Which two statements describe IPv4 default behavior for BGP? Choose Two
Answer: AC
Question: 28
Which two statements describe the connection between control plane and the forwarding plane?
Choose Two
Answer: AD
http://www.justcerts.com
Questions & Answers PDF P-13
Question: 29
Exhibit:
Answer: A
Question: 30
When multiple users are editing the configuration on a Junos device, What is the default
behavior when a user issues a commit command?
A. The user’s configuration changes are committed, other users configuration changes are still
pending
B. The user’s configuration changes are committed, other users will be exited from the configuration
mode
C. All valid configuration changes made by all users will take effect
D. The user will receive an error message disallowing a commit of the configuration
Answer: A
Question: 31
You successfully established a BGP session with peer, but do not see any routes learned from
the peer, What would cause this problem?
Answer: A
Question: 32
http://www.justcerts.com
Questions & Answers PDF P-14
Which two conditions must exist in a Junos device for traffic to transit the device to a
specific destination? Choose Two
Answer: AD
Question: 33
You are asked to limit traffic on interface xe-0/0/3 to 1G using the policer shown in the
exhibit.
Which configuration would accomplish this task?
http://www.justcerts.com
Questions & Answers PDF P-15
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
Question: 34
A. Control plane
B. Management plane
C. RE
D. PFE
Answer: D
Question: 35
What configuration parameter on a Junos device modifies the default next-hop resolution behavior
of a static route?
A. Resolve
B. No-readvertise
C. Passive
D. Preference
http://www.justcerts.com
Questions & Answers PDF P-16
Answer: A
Question: 36
A. All routes within the specified prefix that are longer than the given prefix are considered a
match
B. All routes within the specified prefix that are longer or equal to the given prefix up to a
defined acceptable prefix length are considered a match
C. All routes within the specified prefix that are longer or equal to the given prefix are considered a
match
D. All routes within the specified prefix that are longer than the given prefix up to a
defined acceptable prefix length are considered a match
Answer: A
Question: 37
A. /var/db/
B. /var/tmp/
C. /var/log/
D. /var/home/
Answer: C
Question: 38
http://www.justcerts.com
Questions & Answers PDF P-17
Answer: AC
Question: 39
Exhibit:
You notice traffic destined to 172.31.17.0/24 is traversing an OSPF path rather than BGP
Path.
What is causing this behavior?
Answer: B
Question: 40
http://www.justcerts.com
Questions & Answers PDF P-18
What is the minimum system-defined user class required to issue clear commands?
A. read-only
B. super-user
C. operator
D. authorized
Answer: C
Question: 41
Which two commands would you use to reset the candidate configuration to the active
configuration?
(Choose two.)
A. rollback 0
B. rollback 1
C. rollback 2
D. rollback
Answer: AD
Question: 42
A. If the TACACS+ server is available and rejects the username/password provided, the user is
not allowed to access the device.
B. If the TACACS+ server is available and rejects the username/password provided, the local
password database is checked.
C. If the TACACS+ server is not available, the user is not allowed to access the device.
D. If the TACACS+ server is not available, the local user database is checked.
Answer: CD
Question: 43
A. Esc
http://www.justcerts.com
Questions & Answers PDF P-19
B. Tab
C. Spacebar
D. End
Answer: BC
Question: 44
A. Spacebar
B. Home
C. Esc
D. Tab
Answer: D
Question: 45
A. and
B. from
C. default
D. then
Answer: BD
Question: 46
Which command allows you to verify the syntax and consistency of your configuration
without actually activating your configuration?
A. User Interfaces
B. commit verify
C. commit check
D. check commit
E. commit no-activate
Answer: C
Question: 47
http://www.justcerts.com
Questions & Answers PDF P-20
In your configuration, an interface contains multiple IP addresses belonging to the same subnet. You
want to identify the IP address to use for packets sent to hosts on the same subnet. Which parameter
would you use to accomplish this task?
A. relative
B. preferred
C. primary
D. patch
Answer: B
Question: 48
When you first log in to a router, how does the router indicate that factory defaults are being used?
Junos Configuration Basics
Answer: A
Question: 49
Which keystroke combination allows users to move the cursor to the end of the command
line without deleting text?
A. Ctrl + a
B. Ctrl + e
C. Ctrl + u
D. Ctrl + w
Answer: B
Question: 50
A. load replace
B. load patch
C. load override
http://www.justcerts.com
Questions & Answers PDF P-21
D. load set
Answer: C
Question: 51
Answer: B
Question: 52
You are attempting to upgrade the Junos OS on your device, but there is not enough space to
complete the upgrade. Which parameter, added to the request system software add command,
would solve the problem?
A. no-validate
B. no-copy
C. validate
D. force
Answer: B
Question: 53
Answer: ABD
Question: 54
http://www.justcerts.com
Questions & Answers PDF P-22
Answer: AD
Question: 55
How would you change the display so that 40 lines will be displayed in the terminal program
when you are logged into a Junos device?
Answer: A
Question: 56
Answer: C
Question: 57
What happens when a route does not match any user-configured policies?
Answer: D
http://www.justcerts.com
Questions & Answers PDF P-23
Question: 58
Answer: ACE
Question: 59
A. tcpdump
B. telnet
C. traceroute
D. netstat
Answer: A
Question: 60
Which key could you use to auto-complete a command in the Junos CLI?
A. Delete
B. Ctrl+Z
C. Spacebar
D. Right Arrow
Answer: C
Question: 61
You are in configuration mode at the top of the hierarchy. You need to abort the changes that you
have made and start again with a fresh copy of the active configuration. Which command should
you use to accomplish this task?
A. rollback 0
http://www.justcerts.com
Questions & Answers PDF P-24
B. load active
C. reset config
D. clear candidate config
Answer: A
Question: 62
Answer: C
Question: 63
What is the maximum number of rollback files a Junos device can store?
A. 5
B. 10
C. 49
D. 50
Answer: D
Question: 64
A BGP route does not match any term within a routing policy applied to BGP. Which action is taken
by the router for this route?
A. It discards the route by the implicit ‘discard all’ at the end of the policy.
B. It advertises the route according to BGP rules.
C. It discards the route by the default routing protocols policy.
D. It discards the route because it is unable to match the route to a configured action.
Answer: B
Question: 65
http://www.justcerts.com
Questions & Answers PDF P-25
You are in configuration mode at the top of the hierarchy. How would you save your configuration
to a file on the router?
Answer: C
Question: 66
A. ip
B. ip6
C. inet
D. inet4
Answer: C
Question: 67
Answer: BCD
Question: 68
Answer: B
http://www.justcerts.com
Questions & Answers PDF P-26
Question: 69
Which command displays all IPv4 routes in the default routing instance?
Answer: A
Question: 70
While working on a Junos device, you receive the message shown in the exhibit.
In this scenario, what should you do to stop the shutdown process?
In this scenario, what should you do to stop the shutdown process?
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/clear-
system-reboot.html
Question: 71
You have configured an SRX Series device for the first time. When you command your
configuration, the Junos OS notifies you that you cannot yet commit your configuration. Which
configuration step must you complete?
http://www.justcerts.com
Questions & Answers PDF P-27
A. hostname
B. date/time
C. root authentication
D. security policies
Answer: C
Question: 72
Which two statements are true regarding dynamic routing? (Choose two)
Answer: BC
Question: 73
A packet enters a Junos device. No matching destination entry exists in the forwarding
table. How will the device respond?
Answer: B
Question: 74
Answer: B
Question: 75
http://www.justcerts.com
Questions & Answers PDF P-28
Answer: B
Question: 76
You have the policy configuration shown in the exhibit applied to a BGP peering. You determine
that customer routes coming from the 10.1.1.0/24 network are being rejected
Which action should be used to correct the problem?
***Exhibit is Missing***
Answer: C
Question: 77
Exhibit:
http://www.justcerts.com
Questions & Answers PDF P-29
Answer: D
Question: 78
Referring to the exhibit, what does the number inside the square brackets represent?
A. local preference
B. metric
C. protocol reference number
D. route preference
Answer: B
Question: 79
http://www.justcerts.com
Questions & Answers PDF P-30
Answer: C
Question: 80
A. ge-0/0/1.0
B. ge-0/0/0.0
C. ge-0/0/3.0
D. ge-0/0/2.0
Answer: A
Question: 81
Which command is used to validate the syntax of a configuration without applying the
configuration?
A. commit check
B. commit confirmed
C. commit synchronize
D. commit and-quit
Answer: A
http://www.justcerts.com
Questions & Answers PDF P-31
Question: 82
Answer: D
Question: 83
What are two services performed by the Packet Forwarding Engine? (Choose two.)
Answer: AB
Question: 84
http://www.justcerts.com
Questions & Answers PDF P-32
A. IGMPv3
B. OSPFv2
C. RIPng
D. RIP
Answer: C
Question: 85
What information would you find using the CLI help function? (Choose two.)
Answer: AB
Question: 86
http://www.justcerts.com
Questions & Answers PDF P-33
A user attempts to log in to a Junos device. but the RADIUS server is unreachable.
Referring to the exhibit, what is the default action of a Junos device in this scenario?
A. The Junos device retries every 30 seconds until the connection is restored.
B. The Junos device uses the local authentication database.
C. The Junos device displays a RADIUS connection error.
D. The Junos device prompts for a cached RADIUS password.
Answer: C
Question: 87
A. MTU
B. address
C. protocol family
D. link mode
Answer: AC
Question: 88
http://www.justcerts.com
Questions & Answers PDF P-34
A. IP addresses that are part of the 172.35.0.0/16 network and IP addresses that are in
the 172.35.0.0/16 and 172.36.0.0/16 subnets.
B. IP addresses that are part of the 172.35.0.0/16 network only.
C. IP addresses that are part of the 172.35.0.0/16 network and IP addresses that are in the subnets
of 172.35.0.0/16 network.
D. IP addresses that are part of the 172.35.0.0/16 network, but not IP addresses that are part of the
172.35.0.0/16 network itself.
Answer: B
Question: 89
A. ge-0/0/0
B. ge-0/0/2.0
C. ge-0/0/2
D. ge-0/0/1.0
Answer: D
http://www.justcerts.com
Questions & Answers PDF P-35
Question: 90
What are two default password requirements on devices running Junos OS? (Choose two.)
Answer: AD
Question: 91
A. local preference
B. router preference
C. metric
D. protocol reference number
Answer: C
Question: 92
http://www.justcerts.com
Questions & Answers PDF P-36
Answer: CD
Question: 93
http://www.justcerts.com
Questions & Answers PDF P-37
Referring to the exhibit, which two statements are correct? (Choose two.)
Answer: AC
Question: 94
A. xe-1/1/1
B. ge-2/0/2.0
C. et-5/0/0
http://www.justcerts.com
Questions & Answers PDF P-38
D. ae1.1
Answer: AB
Question: 95
What is the next hop for a packet destined to 192.168.80.98 as shown in the exhibit?
A. 192.168.11.2
B. 172.18.6.1
C. 172.25.11.254
D. 172.18.7.1
Answer: D
Question: 96
http://www.justcerts.com
Questions & Answers PDF P-39
A. xe-1/1/1
B. ge-2/0/2.0
C. et-5/0/0
D. ae1.1
Answer: CD
Question: 97
Referring to the exhibit, which command was issued to generate the output?
Answer: B
Question: 98
http://www.justcerts.com
Questions & Answers PDF P-40
Referring to the exhibit, what happens to a packet that has a destination address of 172.17.0.1?
A. The packet is forwarded to the next hop defined in the default route.
B. The packet is silently discarded.
C. The packet is rejected and an ICMP network unreachable message is sent to the source address.
D. The packet is forwarded to the next hop of the management network.
Answer: C
Question: 99
Which two methods keep a Junos device operational if the primary storage device fails? (Choose
two.)
Answer: AD
Question: 100
A. The PFE performs a destination lookup based on its own routing table.
B. The PFE determines network destinations itself based on the RE’s routing table.
C. The PFE uses the following table provided by the RE.
http://www.justcerts.com
Questions & Answers PDF P-41
Answer: C
Question: 101
A. to add or delete variables from the configuration based on the contents of a specified path file.
B. to completely overwrite the current configuration with the configuration you load.
C. to combine the current configuration with the configuration you load.
D. to look for a replace tag in the configuration you load.
Answer: C
Question: 102
When a system process encounters an error, how does the Junos OS protect the other processes
from being impacted?
Answer: C
Explanation:
http://juniper-basic.blogspot.com/2017/02/juniper-basic.html
Junos OS functionality is compartmentalized into multiple software processes.Each process handles
a portion of the device’s functionality. Each process runs in its own protected memory space,
ensuring that one process cannot directly interfere with another. When a single process fails, the
entire system does not necessarily fail.This modularity also ensures that new features can be added
with less likelihood of breaking current functionality.The Junos OS is the trusted, secure network
operating system powering the high-performance network infrastructure offered by Juniper
Networks. The Junos kernel is based on the FreeBSD UNIX operating system, which is an open-
sourcesoftware system.
Question: 103
http://www.justcerts.com
Questions & Answers PDF P-42
Referring to the exhibit, which action would synchronize the local router’s clock with the NTP server?
A. Configure the correct NTP trusted key using the net trusted-key <key-value> configuration
command under the [edit system ntp] hierarchy.
B. Issue the set date ntp operational command.
C. Configure the NTP server using the set boot-server 172.25.11.254 configuration command under
the [edit system ntp] hierarchy.
D. Reboot the router.
Answer: B
Question: 104
Which two statements are true about the default behavior of Junos routing policies? (Choose two.)
Answer: BD
Question: 105
Which parameter would you use to prohibit the redistribution of a static route used for management
traffic?
A. no-readvertise
B. discard
C. reject
D. passive
Answer: A
Question: 106
At which hierarchy would you configure a static MAC address for interface ge-0/0/0?
http://www.justcerts.com
Questions & Answers PDF P-43
Answer: D
Question: 107
A. %
B. $
C. >
D. #
Answer: A
Question: 108
Which parameter of the monitor traffic command should be used with caution when considering
storage space on a Junos device?
A. detail
B. write-file
C. layer2-headers
D. extensive
Answer: B
Question: 109
What are two benefits realized by the disaggregated Junos? (Choose two.)
Answer: CD
http://www.justcerts.com
Questions & Answers PDF P-44
Question: 110
What are two modes of unicast reverse path forwarding? (Choose two.)
A. Strict
B. High
C. Low
D. Loose
Answer: AD
Explanation:
There are two modes of unicast RPF, strict mode, and loose mode. The default is strict mode, which
means the switch forwards a packet only if the receiving interface is the best return path to the
packet's unicast source address.
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/l3-vpns-unicast-reverse-
path.html#:~:text=There%20are%20two%20modes%20of,the%20packet's%20unicast%20source%20
address.
Question: 111
A. /var/log/
B. /var/tmp/
C. /var/home/
D. /var/db/
Answer: A
Question: 112
A. /var/tmp/
B. /var/log/
C. /var/home/
D. /var/db/
Answer: B
Question: 113
http://www.justcerts.com
Questions & Answers PDF P-45
Which two platforms are supported in physical and virtual form factors? (Choose two.)
A. NFX Series
B. SRX Series
C. MX Series
D. ACX Series
Answer: BC
Question: 114
You notice that the terms in your firewall filter are not in the correct order. What would solve this
problem?
A. Use the insert command to reorder the terms within the filter.
B. Use the count parameter to ensure that the terms are evaluated correctly.
C. Use the reject action to change the action of the filter.
D. Use the next term action to force an evaluation of the next term.
Answer: A
Question: 115
Referring to the exhibit, which command will change the 172.16.10.1/24 IP address to
172.16.100.1/24 IP address?
A. copy interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address 172.16.100.1/24
B. set interfaces ge-0/0/2 unit 0 family inet address 172.16.100.1/24
C. rename interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address
172.16.100.1/24
D. insert interface ge-0/0/2 unit 0 family inet address 172.16.10.1/24 before address
172.16.100.1/24
Answer: C
http://www.justcerts.com
Questions & Answers PDF P-46
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/command-
summary/rename.html
Question: 116
Answer: C
Question: 117
You are connected to your Junos device using an SSH connection to the fxp0 interface. No other
interface are currently configured beyond their default setting. You commit a configuration that
makes the fxp0 interface unreachable from your management network. In this scenario, how would
you re-establish communication with the device?
Answer: D
Question: 118
A. from
B. then
C. default
D. and
Answer: AB
http://www.justcerts.com
Questions & Answers PDF P-47
Question: 119
What is the initial prompt displayed when logging in as the root user?
A. root@router>
B. root@router%
C. root@router#
D. root@router*
Answer: B
Question: 120
A. All router within the specified prefix that are longer than or equal to the given prefix are
considered a match.
B. All router within the specified prefix that are longer or equal to the given prefix up to a
defined acceptable prefix length are considered a match.
C. All router within the specified prefix that are longer than the given prefix up to a defined
acceptable prefix length are considered a match.
D. All router within the specified prefix that are longer than given prefix are considered a match.
Answer: A
Question: 121
You are troubleshooting an issue and want to monitor syslog in real time. Which operational
command accomplishes this task?
Answer: C
Explanation:
https://forums.juniper.net/t5/IOS-to-Junos-I2J-Tips/terminal-monitor-monitor-start-messages/td-
p/128511
Question: 122
http://www.justcerts.com
Questions & Answers PDF P-48
What would you use as a network tool to open a secure terminal connection from a device running
Junos OS to another device?
A. SSH
B. HTTPS
C. RDP
D. telnet
Answer: A
Question: 123
You issue the request system zeroize command. Which statement is correct in this scenario?
A. All data files are deleted and all configuration setting are returned to factory defaults.
B. All data files remain unchanged but all configuration setting are returned to factory defaults.
C. Disk space is freed by rotating log files and a proposed list of files to delete is presented.
D. All data files are deleted and the configuration settings remain unchanged.
Answer: A
Question: 124
Given the configuration shown below: set system authentication-order [tacplus] Which two
statement are correct? (Choose two.)
A. If the TACACS+ server is no available, the user is not allowed to access the device.
B. If the TACACS+ server is no available, the local database is checked.
C. If the TACACS+ server is available, and rejects the username/password provided, the local
password database is checked.
D. If the TACACS+ server is available, and rejects the username/password provided, the user is
not allowed to access the device.
Answer: BD
Question: 125
What’s is the minimum system-defined user class required to issue clear commands?
A. read-only
B. operator
C. authorized
D. super-user
http://www.justcerts.com
Questions & Answers PDF P-49
Answer: B
Question: 126
How would you change the display so the display so that 40 lines will be displayed in the terminal
program when you are logged into a Junos device?
Answer: C
Question: 127
A. xe-10/2/1
B. ge-0/0/0
C. et-3/0/0/0:0.501
D. et-7/1/4.0
Answer: AB
Question: 128
A. Spacebar
B. Esc
C. Tab
D. End
Answer: AC
Question: 129
A. Spacebar
http://www.justcerts.com
Questions & Answers PDF P-50
B. Home
C. End
D. Tab CC
Answer: D
Question: 130
You have configure an SRX Series device for the first time. When you commit your configuration, the
Junos OS notifies you that you cannot yet commit your configuration. Which configuration step must
you complete?
A. security policies
B. hostname
C. date/time
D. root authentication
Answer: D
Question: 131
A. root
B. admin
C. lab
D. juniper
Answer: A
Question: 132
You have received a request from the user, SecurityTeam, to notify their terminal connection only
when someone commits a change to the configuration of a specific networking device. Which
command would you input in this scenario?
Answer: B
http://www.justcerts.com
Questions & Answers PDF P-51
Question: 133
A. 100
B. 150
C. 5
D. 10
Answer: D
Question: 134
A. SFTP traffic that enter one interface and is destine for another interface on the local router.
B. SCP traffic that enters one interface and exit another interface on the local router.
C. SFTP traffic that enters and exits the same interface on the local router.
D. SCP traffic that is destined for the router's loopback interface.
Answer: BC
Question: 135
Depending on the device type, Junos is built upon which two OS kernels? (Choose two.)
A. NetBSD
B. FreeBSD
C. Linux
D. OpenBSD
Answer: BC
Question: 136
What is the maximum number of configurations, by default, that are recoverable using the rollback
command?
A. 50
B. 25
C. 100
D. 75
http://www.justcerts.com
Questions & Answers PDF P-52
Answer: A
Question: 137
Exhibit:
A. There needs to be a ; after top for the command to be accepted as a valid command.
B. Only top should be used, no other options are allowed on the same line.
C. The command shown in the exhibit would be accepted as a valid command.
D. If you replace top with up command, it becomes valid.
Answer: C
Question: 138
Which two types of traffic are processed by the Routing Engine (RE)?
Answer: BC
Question: 139
A. 20814681
B. 14442602
C. 12417
D. 27824
Answer: B
http://www.justcerts.com
Questions & Answers PDF P-53
Question: 140
A Junos device is in a factory-default configuration and no host name is set. What is used in place of a
host name in this scenario?
A. amnesiac
B. router
C. Junos
D. user
Answer: A
Question: 141
Exhibit:
Referring to the exhibit, what is the expected behavior for login attempts from users that receive a
reject form from both the RADIUS and TACACS+ servers?
Answer: B
Explanation:
Local Auth is not included in the authentication-order. It will only consult the local auth if it doesn't
recieved any reply from the RADIUS and TACAS from a certain time. In this case the RADIUS and
TACAS rejects the Authentication therefore no need to consult the local auth.
http://www.justcerts.com
Questions & Answers PDF P-54
http://www.justcerts.com/juniper/JN0-103.html
http://www.justcerts.com