Professional Documents
Culture Documents
Subject to change.
MONO
series
5 4 3 2 1
Inner
heights
10
–
15
Inner
widths
6
–
9 40
6 7 8
tsubaki-kabelschlepp.com/
1 P lastic chain links 4 T ypes with opening 6 E xtensive unsupported 8 L ong service life
crossbars length and high addi- through large bolt hole
2 Inside space is gentle
tional loads through connection
mono
on the cables – no 5 High torsional rigidity
through large link optimised stroke 9 End connectors with
interfering edges
surface system integrated strain relief
3 Types with single-part 7 Easy to shorten and
links
extend
Features
■ Cost-effective cable carrier
■ Easy and fast installation
■ Many types available immediately ex-stock world wide
■ Easy to install
Small types for narrow Fast shortening/extending with Different connection variants
installation spaces push-to-connect chain links through simple reconnecting
Subject to change.
109
MONO MONO series | Overview
series
Addi-
Type
Opening variant
Stay variant
Bi- Cable-
hi hG Bi Bk t KR tional
grid dmax
[mm] [mm] [mm] [mm] [mm] [mm] load
[mm] [mm]
≤ [kg/m]
Key for abbreviations
X mm
on page 16
MONO 0130/..32/..34
0132 10 12.5 6 – 40 12 – 46 – 13 20 – 37 0.5 8
MONO 0180/..82/..84
0182 15 18 10 – 40 18 – 48 – 18 28 – 50 1 12
Design guidelines
0180 15 18 10 – 40 18 – 48 – 18 28 – 50 1 12
from page 64
0184 15 18 15 – 40 23 – 18 28 – 50 1 12
MONO 0202
0202 11 15 6 – 20 13 – 27 – 20 18 – 50 1.2 8.5
technik@kabelschlepp.de
Technical support:
Subject to change.
110
MONO series | Overview
MONO
series
Unsupported arrangement Gliding arrangement Inner Distribution Installation variants
Page
Travel Travel
vertical hanging
or standing
lying on the
side
rotating
arrangement
vmax amax vmax amax Inner
length length TS0 TS1 TS2 TS3
≤ [m/s] ≤ [m/s2] ≤ [m/s] ≤ [m/s2] heights
≤ [m] ≤ [m]
10
–
15
tsubaki-kabelschlepp.com/
1.55 10 50 70 3 30 – – – – • • – 120
1.55 10 50 70 3 30 – – – – • • – 121
mono
1.55 10 50 – – – – – – – • • – 122
1.95 10 50 70 3 30 – – – – • • • 126
Subject to change.
111
MONO 0130/..32/..34 | Types | Overview
series
0130/..32/..34
Key for abbreviations
on page 16
Types
Type 0132..................................................................... page 114
Closed frame (design 020)
■ Weight optimised, closed plastic frame
with high torsional rigidity.
Design guidelines
from page 64
112
0130/..32/..34 | Installation dims. | Unsupported · Gliding
MONO
series
Unsupported arrangement
LS KR H Hz LB UB Innen
Inner
Lf [mm] [mm] [mm] [mm] [mm] heights
höhe
UB LS/2 20 52.5 62.5 89 40
28 68.5 78.5 114 48 10
LB H Hz 37 86.5 96.5 142 57
t
KR Fixed point Driver Inner
widths
6
–
40
Load diagram for unsupported length depending on 1.00
the additional load.
0.50
Sagging of the cable carrier is technically permitted
tsubaki-kabelschlepp.com/
for extended travel lengths, depending on the specific
application.
Intrinsic cable carrier weight qk = 0.16 kg/m with
0.10
Additional load qz in kg/m
mono
tional load changes. 0.05
Speed Acceleration
up to 10 m/s up to 50 m/s2
0.01
Lf in m 0.1 0.2 0.3 0.4 0.5 0.6 0.7
Travel length Additional load
up to 1.15 m up to 0.5 kg/m
LS in m 0.2 0.4 0.6 0.8 1.0 1.2
Gliding arrangement
LS
LS
UB
2
RKR
LB
H
t
KR Fixed point Driver
113
MONO 0132 | Dimensions · Technical data
series
Lk ≈ ––– + LB
2
Technical support:
hi hG Bi Bk KR qk
[mm] [mm] [mm] [mm] [mm] [kg/m]
10 12.5 6 10 15 20 30* 40 Bi + 6 20 28 37 0.091 – 0.162
* On request
Order example
MONO . 0132 . 15 . 28 - 390 VS
Series Type Bi [mm] KR [mm] Lk [mm] Stay arrangement
Subject to change.
114
0130 | Dimensions · Technical data
MONO
series
Type 0130 – with outside
opening crossbars Innen
Inner
heights
höhe
■ Weight optimised plastic frame
with high torsional rigidity. 10
■ Openable at any position.
■ Outside: openable.
Inner
widths
6
–
Stay arrangement on each Bi 6 – 40 mm 40
chain link (VS: fully-stayed)
tsubaki-kabelschlepp.com/
The maximum cable diam-
eter strongly depends on
mono
the bending radius and the
desired cable type.
Please contact us.
2
10
max.
Ø 8 mm
Cable carrier length Lk
rounded to pitch t
KR
Bi 3
Bk
hi hG Bi Bk KR qk
[mm] [mm] [mm] [mm] [mm] [kg/m]
10 12.5 6 10 15 20 40 Bi + 6 20 28 37 0.097 – 0.178
Order example
MONO . 0130 . 15 . 28 - 390 VS
Series Type Bi [mm] KR [mm] Lk [mm] Stay arrangement
Subject to change.
115
MONO 0134 | Dimensions · Technical data
series
torsional rigidity.
■ Openable at any position.
on page 16
■ Outside: openable.
Lk ≈ ––– + LB
2
Technical support:
Bi 3
Bk
hi hG Bi Bk KR qk
[mm] [mm] [mm] [mm] [mm] [kg/m]
10 12.5 6 10 15 20 30 Bi + 6 20 28 37 0.099 – 0.132
Order example
MONO . 0134 . 15 . 28 - 390 VS
Series Type Bi [mm] KR [mm] Lk [mm] Stay arrangement
Subject to change.
116
0130/..32/..34 | End connectors
MONO
series
Single-part end connectors – plastic Single-part end connectors – plastic
(with integrated strain relief)
Innen
Inner
The plastic end connectors can be connected from The plastic end connectors can be connected from heights
höhe
above or below. The connection type can be changed above or below. The connection type can be changed
by altering the position of the end connector. by altering the position of the end connector.
10
Inner
widths
6
–
40
20 7.5 18.9
Lk Lk
l1 = 27.5
tsubaki-kabelschlepp.com/
Bi: 6/10/15/20 3.2 Bi: 6/10/15/20 3.2
BK = Bi + 6
BK = Bi + 6
mono
Bi
Bi
Bi: 30/40 Bi: 30/40
BK = Bi + 6
BK = Bi + 6
Bi – 8
Bi – 8
Bi
Bi
Bi [mm]
8 7 8 7
11 s Assembly options 11
MA MA
Driver Driver
FI MI FI MI
Fixed point Fixed point
FA FA
End connector . M A
End connector Connection point Connection
type
117
MONO 0180/..82/..84 | Types | Overview
series
0180/..82/..84
Key for abbreviations
on page 16
Types
Type 0182..................................................................... page 120
Closed frame (design 020)
■ Weight optimised, closed plastic frame with
high torsional rigidity.
Design guidelines
from page 64
118
0180/..82/..84 | Installation dim. | Unsupported · Gliding
MONO
series
Unsupported arrangement
LS KR H Hz LB UB Innen
Inner
Lf [mm] [mm] [mm] [mm] [mm] heights
höhe
UB LS/2 28 74 89 124 55
37 92 107 153 64 15
LB H Hz 50 118 133 194 77
t
KR Fixed point Driver Inner
widths
10
–
40
Load diagram for unsupported length depending on
the additional load.
Sagging of the cable carrier is technically permitted 1.00
tsubaki-kabelschlepp.com/
for extended travel lengths, depending on the specific
0.50
application.
Intrinsic cable carrier weight qk = 0.25 kg/m with
Additional load qz in kg/m
mono
0.10
tional load changes.
0.05
Speed Acceleration
up to 10 m/s up to 50 m/s2
0.01
Lf in m 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
Travel length Additional load
up to 1.5 m up to 1.0 kg/m
LS in m 0.4 0.6 0.8 1.0 1.2 1.4 1.6
Gliding arrangement
LS
LS
UB
2
RKR
LB
H
t
KR Fixed point Driver
119
MONO 0182 | Dimensions · Technical data
series
Lk ≈ ––– + LB
2
Technical support:
hi hG Bi Bk KR qk
[mm] [mm] [mm] [mm] [mm] [kg/m]
15 18 10 15 20 30 40 Bi + 8 28 37 50 0.123 – 0.186
Order example
MONO . 0182 . 30 . 37 - 720 VS
Series Type Bi [mm] KR [mm] Lk [mm] Stay arrangement
Subject to change.
120
0180 | Dimensions · Technical data
MONO
series
Type 0180 – with outside
opening crossbars Innen
Inner
heights
höhe
■ Weight optimised plastic frame
with high torsional rigidity. 15
■ Openable at any position.
■ Outside: openable.
Inner
widths
10
–
Stay arrangement on each Bi 10 – 40 mm 40
chain link (VS: fully-stayed)
tsubaki-kabelschlepp.com/
The maximum cable diam-
eter strongly depends on
mono
the bending radius and the
desired cable type.
Please contact us.
max.
Ø 12 mm Cable carrier length Lk
rounded to pitch t
KR
Bi 4
Bk
hi hG Bi Bk KR qk
[mm] [mm] [mm] [mm] [mm] [kg/m]
15 18 10 15 20 30 40 Bi + 8 28 37 50 0.169 – 0.252
Order example
MONO . 0180 . 30 . 37 - 720 VS
Series Type Bi [mm] KR [mm] Lk [mm] Stay arrangement
Subject to change.
121
MONO 0184 | Dimensions · Technical data
series
■ Inside: openable.
Lk ≈ ––– + LB
2
Technical support:
Bi 4
Bk
hi hG Bi Bk KR qk
[mm] [mm] [mm] [mm] [mm] [kg/m]
15 18 15 20 30 40 Bi + 8 28 37 50 0.133
Order example
MONO . 0184 . 15 . 37 - 720 VS
Series Type Bi [mm] KR [mm] Lk [mm] Stay arrangement
Subject to change.
122
0180/..82/..84 | End connectors
MONO
series
Single-part end connectors – plastic Single-part end connectors – plastic
(with integrated strain relief)
Innen
Inner
The plastic end connectors can be connected from The plastic end connectors can be connected from heights
höhe
above or below. The connection type can be changed above or below. The connection type can be changed
by altering the position of the end connector. by altering the position of the end connector.
15
Inner
widths
10
–
40
25 7.5 26
Lk Lk
l1 = 32.5
tsubaki-kabelschlepp.com/
Bi: 10/15/20 3.2 Bi: 10/15/20 3.2
BK = Bi + 8
BK = Bi + 6
mono
Bi
Bi
Bi: 30/40 Bi: 30/40
BK = Bi + 8
BK = Bi + 6
Bi – 8
Bi – 8
Bi
Bi
8 7 8 13
s Assembly options
11 11
MA MA
Driver Driver
FI MI FI MI
Fixed point Fixed point
FA FA
Order example
End connector . F A
Subject to change.
End connector . M A
End connector Connection point Connection type
123
MONO 0202 | Types | Overview
series
0202
Key for abbreviations
on page 16
Types
Type 0202..................................................................... page 126
Closed frame (design 020)
■ Weight optimised, closed plastic frame with
high torsional rigidity.
Design guidelines
from page 64
The slotted variant of the MONO 0202 allows fast and easy pressing in of cables without
opening the cable carrier. That saves time and therefore money. It is particularly suitable
for cables with pre-assembled connectors. Please contact us!
Subject to change.
124
0202 | Installation dimensions | Unsupported · Gliding
MONO
series
Unsupported arrangement
LS KR H Hz LB UB Innen
Inner
Lf [mm] [mm] [mm] [mm] [mm] heights
höhe
UB LS/2 18 51 61 97 45.5
28 71 81 128 55.5 11
LB H Hz 38 91 101 160 65.5
50 115 125 198 77.5
t
KR Fixed point Driver Inner
widths
6
–
20
Load diagram for unsupported length depending on
the additional load. 2.00
tsubaki-kabelschlepp.com/
for extended travel lengths, depending on the specific
0.50
application.
Intrinsic cable carrier weight qk = 0.18 kg/m with
Additional load qz in kg/m
mono
0.10
tional load changes.
0.05
Speed Acceleration
up to 10 m/s up to 50 m/s2
0.01
Lf in m 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1
Travel length Additional load
up to 1.95 m up to 1.25 kg/m
LS in m 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Gliding arrangement
LS
LS
UB
2
RKR
LB
H
t
KR Fixed point Driver
125
MONO 0202 | Dimensions · Technical data
series
Bk
Lk ≈ ––– + LB
2
Technical support:
hi hG Bi Bk KR qk
[mm] [mm] [mm] [mm] [mm] [kg/m]
11 15 6 10 15 20 Bi + 7 18 28 38 50 0.14 – 0.17
Order example
MONO . 0202 . 10 . 28 - 460 VS
Series Type Bi [mm] KR [mm] Lk [mm] Stay arrangement
Subject to change.
126
0202 | End connectors
MONO
series
Single-part end connectors – plastic (with integrated strain relief)
The plastic end connectors can be connected from above or below. The connection type can be changed by altering
the position of the end connector. Innen
Inner
heights
höhe
3.2
11
BK = Bi + 7
Inner
Bi
widths
25 7.5
6
Lk
–
20
8 7
s Assembly options
tsubaki-kabelschlepp.com/
mono
MA Connection point Connection type
Driver F – fixed point A – threaded joint outside (standard)
FI MI M – driver I – threaded joint inside
Fixed point
FA
Order example
End connector . F A
End connector . M A
End connector Connection point Connection type
support
127