Professional Documents
Culture Documents
N WIRELINE SYSTEMS
N/N3 WIRELINE CORE BARRELS
Item Part No Description
1-26 BB00001045 N/N3 head assembly
19
20 OPTIONS TO STANDARD CONFIGURATION
19
20 Item Part No Description Qty
14 BF00004543 Bushing - for deep holes -
21
19 BA00000138 Shut off valve, soft -
22
23
24
25
26
N WIRELINE SYSTEMS
N3 WIRELINE CORE BARRELS
Item Part No Description
2 1-16 BB00001067 N3 core barrel assembly 1.5m (5 ft)
1-16 BB00001068 N3 core barrel assembly 3.0 m (10 ft)
3
1-10 BB00001065 N3 inner tube assembly 1.5 m (5 ft)
11
1-10 BB00001066 N3 inner tube assembly 3.0 m (10 ft)
4
1 BB00001045 N/N3 head assembly
14
N/N3 OUTER TUBE COMPONENTS
Item Part No Description Qty
11 BA00000156 Locking coupling - full hole 1
5
12 BA00000147 Adapter coupling 1
13 BA00000121 Landing ring 1
14 BA00000126 Outer tube 1.5 m (5 ft) 1
14 BA00000127 Outer tube 3.0 m (10 ft) 1
15 BA00000122 Inner tube stabilizer 1
16 BA00000268 Thread protector 1
- BB000001076 Outer tube wrench 2
N WIRELINE SYSTEMS
N/N3 WIRELINE CORE BARRELS
Item Part No Description
1-26 BB00001045 N/N3 Head Assembly
4
3 BA00000161 Detent plunger 1
4 BA00000165 Coiled spring pin 7/16" x 1" 1
5
5 BB00000146 Spearhead base 1
6 6 BB00000147 Latch retracting case 1
7 BA00000159 Spring pin 1/2" x 2" 2
7
8 BB00000777 Latch spring 1
9 BB00000666 Latch 2
10 BB00001059 Coiled spring pin 1/2" x 1-1/2" 1
8 11 BB00000148 Upper latch body 1
12 BB00000149 Landing shoulder 1
9 13 BA00000132 Stainless steel ball 1
14 BA00000131 Bushing 1
10
15 BB00000150 Lower latch body 1
16 BA00000441 Nord-lock washer 1
11 17 BA00000157 Lock nut 1
18 BA00000135 Spindle 1
12
19 BA00000139 Shut off valve - hard 2
13 20 BA00000153 Valve adjusting washer 2
14 21 BA00000163 Bearing 1
22 BA00000146 Spindle bushing 1
15
23 BA00000164 Bearing 1
24 BA00000123 Compression spring 1
16 25 BA00000158 Self locking nut 1
26 BA00000314 Inner tube cap assembly 1
17
18
22
23
24
25
26
N WIRELINE SYSTEMS
N2 WIRELINE CORE BARRELS
Item Part No Description
1-11 BB00001056 N2 core barrel assembly 1.5 m (5 ft)
1-11 BB00001057 N2 core barrel assembly 3.0 m (10 ft)
1-5 BB00001054 N2 inner tube assembly 1.5 m (5 ft)
6 1-5 BB00001055 N2 inner tube assembly 3.0 m (10 ft)
1 BB00001053 Head assembly
2
N WIRELINE SYSTEMS
N2 WIRELINE CORE BARRELS
Item Part No Description
1-26 BB00001053 N2 head assembly
1
N2 HEAD COMPONENTS
2
Item Part No Description Qty
3 1 BA00000137 Spearhead point 1
4 2 BA00000179 Compression spring 1
3 BA00000161 Detent plunger 1
5
4 BA00000165 Coiled spring pin 7/16" x 1" 1
6 5 BB00000146 Spearhead base 1
10
13 BA00000132 Stainless steel ball 1
14 BA00000131 Bushing 1
15 BB00000150 Lower latch body 1
11 16 BA00000441 Nord-lock washer 1
17 BA00000157 Lock nut 1
12
18 BA00000135 Spindle 1
13 19 BA00000139 Shut off valve - hard 2
14 20 BA00000153 Valve adjusting washer 2
21 BA00000163 Bearing 1
15
22 BA00000146 Spindle bushing 1
23 BA00000164 Bearing 1
16 24 BA00000123 Compression spring 1
17
25 BA00000158 Self locking nut 1
26 BA00000321 Inner tube cap assembly 1
18
19
20 OPTIONS TO STANDARD CONFIGURATION
19
20 Item Part No Description Qty
14 BF00004543 Bushing - for deep holes -
21
19 BA00000138 Shut off valve, soft -
22
23
24
25
26
N WIRELINE SYSTEMS
N/N2/N3 WIRELINE CORE BARREL CONSUMABLE KITS
Item Description N N2 N3 Qty
1 - Consumables kit BB00001028 BB00001029 BB00001030 -
1 Spearhead point BA00000137 BA00000137 BA00000137 1
2 Compression spring BA00000179 BA00000179 BA00000179 2
4
2 3 Detent plunger BA00000161 BA00000161 BA00000161 1
4 Coiled spring pin BA00000165 BA00000165 BA00000165 2
3
5 Spring pin BA00000159 BA00000159 BA00000159 4
5 6 Latch spring BB00000777 BB00000777 BB00000777 2
7 Latch BB00000666 BB00000666 BB00000666 4
7 8 Coiled spring BB00001059 BB00001059 BB00001059 4
9 Stainless steel ball BA00000132 BA00000132 BA00000132 1
6
10 Bushing BA00000131 BA00000131 BA00000131 4
8 11 Landing shoulder BB00000149 BB00000589 BB00000149 2
9 12 Nord-lock washer BA00000441 BA00000441 BA00000441 1
18 To ensure you have the consumable parts available when you need them,
19 Sandvik has developed a consumables kit for our wireline core barrels based on
20 the average usage for 1000 m of drilling.
21
22
23
24
25
N WIRELINE SYSTEMS
Item Part No Description Qty
1-20 BB00000089 Overshot assembly -
1 1 BA00000349 Wire rope thimble 1
2 2 BA00000346 Eye bolt 1
3 3 BA00000343 Cable swivel collar 1
4
5 4 BA00000352 Bearing 1
6 5 BA00000353 Castle nut 1
7 6 BA00000356 Cotter pin 1
7 BA00000134 Grease fitting 1
8 8 BA00000366 Cable swivel body 1
9 BB00000090 Jar staff 1
10 BB00000091 Jar tube 1
11 BA00000362 Release sleeve 1
12 BB00000095 Nord-lock washer 1
13 BB00000094 Hex nut 1
14 BA00000344 Set screw, 3/8 UNF x 3/4 Nyloc 1
15 BA00000348 Compression spring 1
16 BA00000515 Lifting dog 2
17 BA00000361 Pin 1/2" x 1-13/16" 1
18 BA00000504 Spring pin 1/4" x 1-3/4" 1
19 BF00002327 Safety pin 1
20 BB00000096 Overshot head 1
A safety pin (item 19) is included with the overshot assembly and
can be used when handling the inner tube assembly out of the
hole. When inserted into the overshot head, it helps to prevent
9
the lifting dogs from releasing the spearhead point.
10
11
12
13
14
15
16
17
18
19
20
N WIRELINE SYSTEMS
To have you up and running with the new industry LINK LATCH TO CAM LATCH SYSTEM - N/N2/N3
standard, Sandvik has put together an all inclusive kit Item Part No Description Qty
to ensure your conversion is made easy. - BB00001032 Conversion kit -
1 BB00000777 Latch spring 1
Steps outlining the conversion from link latch to cam 2 BB00000666 Latch 2
latch: 3 BB00001059 Coiled spring pin 1/2" x 1-1/2" 1
1. Remove link latch components as indicated in 4 BA00000159 Spring pin 1/2" x 2" 2
green 5 BB00000234 Drift pin (for spring pin) 1
2. Reinstall the spearhead and retraction case 6 BB00000235 Drift pin (for coiled spring pin) 1
components 7 BB00001031 Instruction card (not shown) 1
3. Place the latch spring in the spring pocket
between the two latches NOTE: It is recommend that while upgrading, the spring
4. Keeping these three items together, insert them pin should be replaced with the coiled spring pin
into the upper latch body through the window in included in this kit (item #3).
the retraction case
5. Pull up the retraction case to install the new coiled Recommended Tools:
spring pin • Hammer
Drift Tool
6. Release the retraction case and fold in the latches • Rachet and 9/16 in
to reinstall the spring pin socket (14 mm)
• 4 in (100 mm) socket
For detailed step by step instructions and your extension
conversion kit, contact your Sandvik representative
today.
1 2 3 4
5 6
Patent pending.
N WIRELINE SYSTEMS
SPRING LATCH TO CAM LATCH SYSTEM - N/N3
Item Part No Description Qty
1
1-15 BB00001072 Conversion Assembly -
1 BA00000137 Spearhead Point 1
2 BA00000179 Compression Spring (not shown) 1
3 3 BA00000161 Detent Plunger 1
4
4 BA00000165 Coiled Spring Pin 7/16" x 1" 1
5 BB00000146 Spearhead Base 1
6 BB00000147 Latch Retracting Case 1
5
7 BA00000159 Spring Pin 1/2" x 2" 2
8 BB00000777 Latch Spring 1
6 9 BB00000666 Latch 2
10 BB00001059 Coiled Spring Pin 1/2" x 1-1/2" 1
11 BB00000148 Upper Latch Body 1
7 13 BA00000132 Stainless Steel Ball, 22 mm (not shown) 1
14 BA00000131 Bushing (not shown) 1
15 BB00000150 Lower Latch Body 1
N WIRELINE SYSTEMS
TS1-028:01/ENG - 04/2015 © Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
Sandvik Mining reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a
Sandvik representative for clarification on specifications and options.
MINING.SANDVIK.COM