Professional Documents
Culture Documents
Cara Update Software BC-5000
Cara Update Software BC-5000
Unzip the file named "update.tar.gz", and then copy the “update” directory in the unzipped
file to the root directory of the formatted USB.
• The USB should have been formatted to FAT32 before you copy and paste the "update"
directory to it.
• When the USB is ready, it should have an "update" folder under the root directory, and the
"update" folder further contains two sub-folders named "step1" and "step2".
Upgrade
After inserting the USB into the USB port of the analyzer, enter the advanced toolbox, start
the upgrade, and upgrade the software according to the prompts. The "Update" process
includes two steps:
– If the update guide and the operation system are also needed to be updated, the
system will prompt you to restart the analyzer between step 1 and step 2; if only the
software module need to be updated, the update will start from step 2 directly.
• Do not pull the USB or disconnect power during the update; otherwise the analyzer
may not start.
• The update usually takes about 10 minutes but depends on the number of modules to be
updated. Do not leave the analyzer as the process requires user operation.