Professional Documents
Culture Documents
PRESSURE TRANSMITTER
ATM/IS
83
Ordering information
Proof pressure Load resistance
FS up to 15 psi: 45 psi Influence of load resistance < 0.1% FS Please specify the following:
FS > 15 psi up to 4000 psi: 3 x FS [Ohm] U [V] - 10V
1) Model number - ATM/IS 83
RL< B
FS > 4000 psi up to 9000 psi: 12,000 psi 1000
0.02A 2) Electrical connection
FS > 9000: 22,000 psi 01 - DIN 43650
Consult factory for higher proof pressure 500 06 - 6 pin bayonet (mating connector extra)
RL 17 - Polyurethane cable (blue)
Burst pressure 0 3) Pressure range, including eng. units, type
FS up to 350 psi: > 3000 psi 0 10
UB
20 30 [V]
4) Accuracy
FS up to 9000 psi: > 12,000 psi 5) Output signal
FS > 9000 psi: > 22,000 psi Output signal 6) Any special feature: i.e. lightning protection
Consult factory for higher burst pressure 4 - 20 mA (2-wire)
4 - 20 mA with surge (lighting) protection Example ordering format:
Operating temperature range (option) ATM/IS 83. 17 - 100 psig - 0.1% - 4 - 20mA -
-15 to 130°F (process media, Fig. 1) Insulation resistance 10 feet cable
-15 to 212°F (process media, Fig. 1) > 50 megohms @ 500 VDC (@ 68°F)
-15 to 300°F (process media with cooling ext., Response time
Fig. 2) < 1ms/10 to 90% FS
Options
Compensated temperature range Construction STS offers a wide range of options for these
32 to 160°F (standard) Pressure media compatability and other similar transmitters. Please consult
-15 to 185°F (option) Stainless steel 316L, Viton seals the factory for any special requirements.
-40 to 185°F (option) Other seal materials available
For NACE compatability consult factory Examples include:
Temperature effects - Alternate electrical configurations (not IS)
±1.5% total for 32 to 160°F, > 30 psi FS Pressure connection i.e. 1 to 5 VDC, 0 to 10 VDC, 0 to 20 mA,
±2% total for 32 to 160°F, 7 to 30 psi FS 1/4“ NPT female RS485
±2% total for -10 to 185°F, > 30 psi FS 1/4“ NPT male - Lightning protection
±2.5% total for -10 to 185°F, 7 to 30 psi FS 7/16“- 20 male - Cooling extension
Prorated for ranges below 7 psi Other connections available - Explosion proof certification
- Pressure snubber
Performance Electrical connection - Special oil filling for food application etc.
Accuracy DIN 43650 (Fig. 3) - Alternate construction i.e titanium, hastelloy
Combined linearity, hysteresis, repeatability, 6-pin bayonet per MIL-C-26482 (10-6) (Fig. 4) - Alternate seals i.e. EPDM, Kalrez
Zero and Span set Polyurethane cable (Fig. 5) - Wide range of pressure connectors
≤ ±0.1% FS (≥ 7 psi FS) Demountable versions and other types - Wide range of electrical connectors
≤ ±0.25% FS (< 7 psi FS) available - Datalogging
Dimensions (inches)
Version for medium temperature up to 212°F 1.83
0.94
2.17
Fig. 1
3.70 with option lightning protection
0.77
Fig. 4
1.3
Version for medium temperature up to 300°F
ø 1.14
ø 0.94
0.94
Fig. 3
Fig. 5
3.23
4.76 with option lightning protection
Fig. 2
Specifications may change without notice. STS is registered ISO 9001-2008 10.00.0202D - 402