Professional Documents
Culture Documents
Interra Just Touch Interra justTouch is a complete room control device with a touch front
• Pushbutton has Switching, toggle, dimming, shutter/blinds,
In full touch models, automation controls can be achieved by touch-
ing the icons on the screen and also by touch buttons located on the
panel and 3.5 "colourful TFT screen. It performs all functions required
thermostat controls, scenes, value, 2 channels, step switching sides of the TFT LCD screen. However, in acrylic touch models, the
for building automation such as lighting, shutter/blind control and DND mode features. icons on the screen are used as indicators. Control operations are
as well as thermostat functions with its unique page structure. In the • All 6 models can be programmable with same database. provided by the touch buttons on the sides of the TFT LCD screen.
Interra justTouch user interface, there are 6 function pages other than • Locking feature available for each button and complete device The table below shows the various icons and their meanings on the
the home page. Each page can be customized as desired by the users justTouch.
• On/Off (2-points) and Proportional (Continuous or PWM)
via ETS, and the button functions on each page can be adjusted thermostat functions.
according to need. In addition, button images and texts can be • Comfort, standby, economy and building protection operating Icon Definition Icon Definition
changed on ETS. Besides internal temperature and humidity sensors modes.
on Interra justTouch, external humidity, temperature and air quality • Manual or Automatic switching between Heating and Cooling Lighting Shutter/Blind
information can be monitored via KNX. The product range has mainly 6 modes. Control Control
different models with full touch and acrylic touch functionality. All • Temperature measuring through the integrated sensor with
Thermostat
models can be programmable with the same ETS database, which the possibility of sending the value on change and periodically Scene Control
to the bus. Control
provides efficient commissioning.
• Temperature (measured, external, setpoint, outdoor values as
DND/MUR
°C), CO2 concentration (from the bus), humidity percentage, General
Control
MODELS AND VARIATIONS operating modes, fan levels, on/off indicators, warnings and
locking status are displayed on the screen.
Settings
Coding Standard: • Fan controller available with different speed indicators. RGB Control
A : Button count Configuration
• Relative humidity measuring through the integrated sensor
ITR32X-XXXX B : Touch Type with the possibility of sending the value on the bus.
Standby Mode Comfort Mode
• Threshold alarm is defined for temperature, humidity and air
Product Code ITR32X-XXXX C : Reserved quality levels.
Building
Power Supply KNX Power Supply A BC D D : Colour • RGB LED control. Economy
Mode Protection
Touch Display
Touch Display
Display Acrylic Touch : Touch buttons + non-touch 1 2 justTouch is shown in
screen Figure 1. The relevant
1 2 3 4 function pages can be
Temperature Sensor (±0.2°C sensitivity) accessed here. There
Sensors 5 6 are 6 different function
Humidity Sensor (±2 %RH sensitivity)
pages that are adjustable
1 2 3 4 7 8 upon requests in Interra
Interfaces 320 RGB x 480 Dots TFT LCD display
justTouch.
Commissioning Mode S-Mode Touch Touch Touch
Parts Parts Parts
Type of Protection IP 20
Models with Acrylic Touch :
Operation (-10°C...70°C) Fig.1 Full Touch : 7.70 mm
Temperature Range ITR322-0XXX ITR324-0XXX ITR328-0XXX A
Storage (-25°C...100°C) Acrylic Touch : 7.20 mm
Display
Display
justTouch is shown in
Buttons: Depends on models 1 2 3 4 Figure 2. Setpoint control,
C 37 mm
Colour
Back cover: Matte black 5 6 switching between the
D
Full Touch : 1.5 mm
operating modes, fan Acrylic Touch : 1 mm
Dimensions 90 x 90 x 37 mm (W x H x D) 1 2 3 4 7 8 speed controls can be
made. Also, indications E 90 mm
Certification KNX Certified such as temperature,
Touch Touch Touch Touch Touch Touch F 47 mm
CO₂ concentration, on/
Configuration Configuration with ETS Parts Parts Parts Parts Parts Parts off, warnings can be
monitored.
© 2022 INTERRA Fig.2 DS220622091EEN
1/2
CONNECTION TO KNX BUS AND PROGRAMMING MOUNTING JUSTTOUCH COMPONENTS
The connection of the KNX bus line is made with the terminal block Interra justTouch’s mounting steps are described below. The procedu-
(black/red) included in delivery and inserted into the slot of housing. res are described in 2 main sections : Mounting and demounting.
KNX +
BUS -
Fig.5
7 6 5 4 3 2 1
Fig.3 Item
Part Name Description Qty.
No.
ST-LINK MCU PROG. HOLES
Prog. Button KNX Connector box with M3.5x20 mm screws with a maximum torque of 1.4 N.m. Full touch models can be controlled with all
region on the front panel.
• Second, KNX cable and input cables, if any, are attached to the
Fig.4 relevant connectors on Interra justTouch.
SAFETY INSTRUCTIONS MARKS
The connectors of Interra justTouch are shown in Fig.4. There are the
• Finally, the justTouch is gently placed in the junction box with the
CE: The device complies with Electromagnetic Compatibility
following connectors on Interra justTouch : KNX connector, ST-Link top part (see Fig.3) facing up with holding the right and left sides • All Installations should only be performed by qualified personnel Directive (2014/30/EU), Low Voltage Directive (2014/35/EU) and
MCU programming connector, analog/digital input connectors, of the justTouch and the mounting process is completed. following applicable regulations on preventing accidents, as
Restricting the Use of Hazardous Substances Directive (2011/65/
programming mode button, Boot-Mode & TTL Com connector. required by law.
EU).
2/2