Professional Documents
Culture Documents
C12.20 .5 CLASS
DESCRIPTION FEATURES
The Acuvim II Series advanced power + Revenue grade: ANSI + Available compatibility with
and energy meters are the simple, C12.20 class 0.1 & IEC multiple CT output options
robust solution for power monitoring, 62053-22 class 0.1s including 5A, mA, RCT
+ Data Logging available in (Rogowski), or 333mV
kWh metering, power quality analysis,
and more. This multifunction meter is 8MB, 16MB, 4GB, and 8GB + High Resolution Frequency
engineered for easy integration into any with WEB2 module Measurements- 0.001Hz
project environment and a wide array + Modbus-RTU & BACnet MS/ + High Speed update rate -
of plug-in expansion modules facilitate TP ready. Optional modules less than 20ms
add support for multiple + Dual Ethernet Ports
communication on over 15 different
industrial protocols &
industry-standard protocols. Its two, with both RSTP bridge
interfaces such as Modbus-
available form factors include a Panel daisy-chain mode and
TCP/IP, BACnet-IP, IEC
Mount meter with a digital display or separately configurable
61850, EtherNet/IP and
network
a DIN Rail Transducer configuration. WiFi
+ 4th CT input- Measure
+ Designed with industry-
Neutral Current
leading cybersecurity
+ 512 samples per cycle, rapid logging options available Waveform Capture
with 100ms and 50ms refresh rate available with WEB2
+ With a settable triggering condition, the Acuvim IIW can
expansion module.
record 100 groups of voltage and current waveforms
Time of Use plus the waveform 10 cycles before and after the
triggering point. Connect the AXM-WEB2 module to
+ Users can assign up to four tariffs (sharp, peak, valley,
save waveform files in COMTRADE format.
& normal) to different time periods within a day. The
Acuvim IIE meter will calculate and accumulate energy Automatic Frequency Adaptation
to different tariffs according to the meter’s internal
+ Rated frequency automatically adjusts to local
clock and TOU settings.
frequencies, such as 50Hz or 60Hz, making it ideal
Display in countries with differing electrical frequencies.
+ Clear, large character LCD with white backlight Flexible Current Transformer Options
+ Wide environmental temperature endurance
+ The Acuvim II is directly compatible with Rogowski coils
+ View load percentage, 4 quadrant powers, & load nature plus a variety of other current transformer outputs
including 5A, 1A, 80mA, 100mA, 200mA, and 333mV.
All CTs are available from Accuenergy.
APPLICATIONS
Input Communications
CURRENT INPUTS (EACH CHANNEL) Modbus-RTU
Pickup Current 5mA, 1mA, 5mA, 5mA, 5mA Ethernet 10M/100M BaseT
MODBUS-TCP/IP
20Arms Continuous, 0.1% of Nominal
Withstand DNP 3.0 Over IP Level 2
100Arms for 1 second, Non-Recurring
Burden 0.05VA (Typical) @ 5A RMS IEC 61850 2nd Edition
SNMP V3
Accuracy 0.1% at Reading
ETHERNET BACnet-IP
VOLTAGE INPUTS (EACH CHANNEL) (OPTIONAL MODULE) HTTP/HTTPs Webserver
Nominal Full Scale 400Vac L-N, 690Vac L-L (+20%) HTTP/HTTPs, FTP data post
1500Vac Continuous SMTP
Withstand
2500Vac, 50/60Hz for 1 Minute
MQTT
Input Impedance 2MΩ per Phase MV90
Metering Frequency 45Hz~65Hz, 300Hz~500Hz NTP
Pickup Voltage 10Vac PROFIBUS-DP/V0 Protocol
Accuracy 0.1% at Reading Work as PROFIBUS Slave, Baud Rate
Adaptive, up to 12M
ENERGY ACCURACY PROFIBUS
Model 1: Input Bytes: 32, Output Bytes: 32
Class 0.1s (According to IEC 62053-22) (OPTIONAL MODULE)
Active Model 2: Input Bytes: 64, Output Bytes: 2
Class 0.1 (According to ANSI C12.20)
PROFIBUS Standard According to EN
Reactive Class 2 (According to IEC 62053-23)
50170 Vol. 2
HARMONIC RESOLUTION
63rd Harmonic (50Hz or 60Hz type)
Metered Value
15th Harmonic (400Hz type)
DAYLIGHT SAVINGTIME
Two Adjustable Formats Month/Day/Hour/Minute, Month/Week/First few weeks/Hour/Minute
WAVEFORM CAPTURE
Voltage and Current Waveform Trigger, Manual, DI change, Sag/Dips, Swell, Over Current
POWER QUALITY
Voltage Unbalance Factor U_unbl
Monitoring
Harmonics 2nd to 63rd, Crest Factor, THFF, K Factor, Sequence and Phase
Angles, DI Counter, AI, AO, Dmd P/Q/S, Dmd I1/2/3
ONBOARD MEMORY SIZE
Standard Meter 8MB 16MB
Memory AXM-WEB-PUSH 4GB 4GB
AXM-WEB2 8GB 8GB
COMMUNICATION
RS485 Port, Half Duplex,
Modbus-RTU Protocol
Optical Isolated
Modbus-RTU and BACnet-MS/TP
TIME
Real Time Clock Year, Month, Date, Hour, Minute, Second
400Hz TYPE
Only support full-wave energy, support 2nd~15th individual harmonics
Modbus-RTU
BACnet-MS/TP
DNP 3.0 Over IP
IEC 61850
Modbus-TCP/IP
HTTP/HTTPs
Webserver
SMTP Email
SNMP V3
EtherNet/IP
MQTT
RSTP
IPv6
HTTP/HTTPs Push
FTP Post
sFTP Server
Datalogging 8GB 8GB 4GB
BACnet-IP
PROFIBUS
WiFi
RJ45 Ports 1 2 1
Fiber Optics LC
868 MHz,
RF
900 MHz
DIGITAL/ANALOGUE I/O
AXM-IO1 AXM-IO2 AXM-IO3
Digital Output - 2 -
Relay Output 2 - 2
Analogue Inputs - - 2
Analogue Outputs - 2 -
Power Supply 24Vdc - -
3.58" (91.0mm)
3.62" (92.0mm)
Cut-Out Cut-Out
H P E V/A
2.00" (50.7mm)
3.80" (96.0mm)
3.80" (96.0mm)
3.58" (91.0mm)
H P E V/A
1.41" (35.9mm)
3.80" (96.0mm) 3.80" (96.0mm) 1.41" (35.9mm) 0.39" (10.0mm)
2.00" (50.7mm) 0.55" (14.0mm)
2.19" (55.6mm)
0.87" (22.0mm)
0.77" (19.5mm)
3 Phase 4 Wire (3LN, 3CT) 3 Phase 3 Wire (3LL, 3CT) 3 Phase 4 Wire with PT (3LN, 3CT)
LINE LINE LINE
A B C N
1A FUSE 1A FUSE 1A FUSE
12 11 10 9 12 11 10 9 Terminal Block
I11 12 11 10 9
VN V3 V2 V1
I12
I21
Acuvim II Acuvim II Acuvim II
I22
I31
I32
LOAD
LOAD LOAD
3 Phase 3 Wire with PT and 2 CT(3LL, 3CT)* Single Phase 3 Wire (1LL, 2CT) Single Phase 2 Wire (1LN, 1CT)
LINE LINE LINE
A N
1A FUSE
1A FUSE 1A FUSE
12 11 10 9
12 11 10 9 I11 12 11 10 9
VN V3 V2 V1
I12
I21
I22
Acuvim II
Acuvim II
Acuvim II I31
I32
LOAD
LOAD LOAD
AXM-IO1 AXM-IO2/IO3
DI1 DI2 DI3 DI4 DI5 DI6 DIC RO1 RO2 ROC V+ V- DI1 DI2 DI3 DI4 DIC
QF1
QF2
QF3
QF4
QF5
QF1
QF2
QF3
QF4
QF5
QF6
- + -
+ + -
20-160Vac/dc
L N G
COM
RO1 V+ Power Supply com
DOC DO1 OUT Pulse Output
DO Type
10K
Relay Control
DOC DO2 Alarm Output
Buzzer
ROC
3 Phase 4 Wire (3LN, 3CT) 3 Phase 3 Wire (3LL, 3CT) 3 Phase 3 Wire with PT and 3CT(2LL, 3CT)*
LINE LINE LINE
A B C N A B C A B C
1A FUSE 1A FUSE 1A FUSE
3 Phase 4 Wire with PT (3LN, 3CT) Single Phase 3 Wire (1LL, 2CT) Single Phase 2 Wire (1LN, 1CT)
A B C N LINE LINE
A N B A N
1A FUS E
1A FUSE 1A FUSE
ACCESSORIES
DIN Rail Adapter Protective Display Cover USB RS485 Converter
The AXM-DIN Rail Adapter is the easy The Protective Display Cover is This plug-and-play USB to Serial
way to mount the Acuvim II Series designed for Acuvim II Series energy RS485 Converter is designed to
energy meter on either horizontal or meters and other 96mm by 96mm provide a convenient, reliable
vertical DIN rail. The adapter quickly display panel meters. Crucial in USB connection to the Acuvim II
secures to the meter and is compatible harsh environments, it increases the Series power meters and other
with all AXM communication modules IP environmental rating of a meter's serial devices.
as well as I/O options. display to IP66 or NEMA 4X.
Acuvim IIR:
IIR: D: LCD Display 5A: 5A/1A P1V3: 100~415Vac,
Data Logging, TOU (Panel Mount Meter/Transducer) (Input Field Selectable) 50/60Hz, 100~300Vdc
Acuvim IIW:
M: DIN-Rail Mount Transducer without Display mV: 333mV and Rogowski Coil
IIR + Waveform Capture P2V3: 20~60Vdc
(Optional Remote Display Available) (Input Field Selectable)
and PQ Event Logging
mA: 80ma/100mA/200mA
(Input Field Selectable)
RS485: Modbus-RTU
Note: 1. Refer to the Communication table and Digital/Analogue I/O table on page 6.
2. A maximum of 3 modules may be attached to the meter. If a communication module is used (e.g. AXM-WEB2), it must be installed on the back FIRST before the
other I/O modules are attached.
3. No more than 2 of the same I/O modules may be attached to the meter (e.g. two AXM-IO2). The same two I/O modules must have a different logic number.
4. If Acuvim IIW uses DI to trigger a waveform capture, the I/O module logic number must be Module 1.