Professional Documents
Culture Documents
Dobermann SV
Dobermann SW
Dobermann SV Dobermann SW Dobermann SW GP
13-15-17- 20m3 16-18-20-22-24m3 27-30-33m3
Single Auger Twin Auger Twin Auger
The Range
Dobermann LS (15 km/h)
SV: 13-15-17-20 m³
SW: 16-18-20 m³
Diesel Engine
2 Speed Gear Box
Accumulator
Technical features
Rear suspension : Rigid (LS - AS) or Hydro pneumatic up to 80 mm total
stroke HS version
LS-AS HS
Technical features
Rear suspension : Rigid (GP)
Technical features (optional GP)
3rd Rear axel : Hydro pneumatic suspension with self leveling
system 25 or 40 km/h Ecomode. (3rd axle not steering)
Weight distribution:
Total : 17460 kg
Front axle: 7000 kg
Double rear axle: 10460 kg
LS- Optional
Technical features
Brake: Front Disc brakes (ø440 mm; sp.22 mm)
Rear LS-AS Negative brakes Oil bath brakes for HS
Single brake
caliper Double brake caliper HS
Standard GP 25km/h
HS 40 km/h Oil bath disc brake
HS 40 km/h
Technical features
Yellow:
- Silage Cutter Control
Blu:
- Loading Conveyor
Storti comes standard with the device for hooking the milling
arm and double lift cylinders in order to prevent unnecessary
stress to the chassis and the cutter arm.
Redactors, augers and knifes
Tank Thickness
Wall
Bottom
Dobermann LS
SV- SW : wall 6mm – bottom 15mm (no over flow ring)
Optional: wall 8mm – bottom 18mm (over flow ring)
Dobermann AS-HS
SW 160 : wall 8mm – bottom 15mm (over flow ring standard)
SV- SW : wall 8mm – bottom 18mm (over flow ring standard)
Dobermann GP
SW : wall 8mm – bottom 20mm (over flow ring standard)
Tank stainless steel optional
Layer of stainless steel
H=1000mm
Thickness= 4mm
In addition to the
standard wall
Model - Modello Auger Gearbox - Riduttore 1st gear (rpm) 2nd Gear (rpm) Overboost (rpm)
15 mm
Optional:
•Sprint paddle
•Sprint paddle + magnet Scraper sp.20mm
Augers options
15 mm Steel +
20 mm Steel
4 mm stainless steel
15 mm Steel +
100*4 stainless steel
plate
Regular and controlled cutting
Hydraulic counter knives
in low position
Cutter Activ
The ‘ACTIVE CUTTING’ system combined
with the hydraulic counter knives reduces
cutting and mixing time and provides the
optimum mixed ration
Technical specifications of the frame
The frame is made by 3 main sections:
1. 250 x 100 x 6 mm. square sections
2. Close structure for milling cutter support
3. Close structure for suspension support
With this specification we can have stiff frame and
save weight and fuel consumption.
The Mc-Pherson guarantee more comfort and avoid 3
All stress for the frame in order to have a safe
driving feeling. (photo top right)
1 2
Chassis GP.
Storti
Independent cabin on anti-vibration.
The widest access to the cabin in the
Market.
Cabin with Ergonomic controls, and the
scale integrated in the dash-board which
does not restrict the visual field.
Storti, the best accessibility to engine room.
The engine compartment is easily accessible from the left side of the vehicle
and allows the complete entry of a person inside the engine compartment.
Also the radiator can be reached from all sides for an easy cleaning.
The best accessibility to engine room.
Height 650mm
800 mm
Width 920 mm
300 mm
Unloading optional, rotating magnet or static.
Magnet allow to pick up all the dangerous iron items it might be on the
TMR, such as nails, part of knife, bolt…
The magnet can be static or rotating.
Front Rubber shield (optional)