Professional Documents
Culture Documents
Project : UT5300L
Chassis : UWM00
Model : UE43T5300AU
SERVICE Manual
LED TV Contents
1. Precautions
2. Product specifications
4. Troubleshooting
5. Wiring Diagram
6. Dimension
UE43T5300AU
Contents
1. Precautions ............................................................................................................................1-1
1-1. Safety Precautions ............................................................................................................................ 1-1
1-1-1. Warnings .................................................................................................................................. 1-1
1-1-2. Servicing the LED TV ............................................................................................................. 1-1
1-1-3. Fire and Shock Hazard .......................................................................................................... 1-1
1-1-4. Product Safety Notices .........................................................................................................1-2
1-2. Servicing Precautions .......................................................................................................................1-3
1-2-1. General Servicing Precautions ............................................................................................1-3
1-3. Static Electricity Precautions ..........................................................................................................1-4
1-4. Installation Precautions ...................................................................................................................1-5
This Service Manual is a property of Samsung Electronics Co.,Ltd. © 2020 Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable All rights reserved.
International and/or domestic law. Printed in Korea
1. Precautions
1. Precautions
1-1. Safety Precautions
Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as
electrical shock.
1-1-1. Warnings
(READING SHOULD)
NOT BE ABOVE 0.5mA LEAKAGE
DEVICE
CURRENT
UNDER
TESTER
TEST
TEST ALL EXPOSED
METAL SURFACES
2-WIRE CORD
4. With the unit completely reassembled, plug the AC line cord directly into a 120V AC outlet. With the unit’s AC switch first
in the ON position and then OFF, measure the current between a known earth ground (metal water pipe, conduit, etc.)
and all exposed metal parts, including: metal cabinets, screwheads and control shafts.
The current measured should not exceed 0.5 milliamp.
Reverse the power-plug prongs in the AC outlet and repeat the test.
1-1
1. Precautions
Wear protective equipment (gloves, safety goggles, etc) to prevent injuries and electrical shock that may
occur during TV product disassembly/repair.
WARNING
1-2
1. Precautions
Before servicing units covered by this service manual, read and follow the Safety Precautions section of
this manual.
CAUTION
If unforeseen circumstances create conflict between the following servicing precautions and any of the
safety precautions, always follow the safety precautions.
NOTE
1-3
1. Precautions
Be sure no power is applied to the chassis or circuit and observe all other safety precautions.
CAUTION
8. Minimize body motions when handling unpackaged replacement ESDs. Motions such as brushing clothes together, or
lifting your foot from a carpeted floor can generate enough static electricity to damage an ESD.
1-4
1. Precautions
− Risk of explosion if battery is replaced by an incorrect type dispose of used batteries according to
the instructions.
− Do not dispose of batteries in a fire.
− Do not short circuit, disassemble or overheat the batteries.
CAUTION − Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
− Do not be exposed to excessive heat such as sunshine, fire or the like.
1-5
2. Product specifications
2. Product Specifications
2-1. Product Information
Model UE43T5300AU
Front View H
Detail View
2-1
2. Product specifications
Item UE43T5300AUXCE
2-2
2. Product specifications
Item UE43T5300AUXCE
Woofer N/A
Multiroom Link Yes
Blutooth Audio N/A
Smart Service Samsung SMART TV Smart
Operating System Tizen™
Bixby N/A
Voice Interaction N/A
Far-Field Voice Interaction N/A
Alexa Built-in N/A
Works with Google Assistant N/A
Works With Alexa N/A
TV Plus N/A
Web Browser Yes
SmartThings App Support Yes
SmartThings N/A
Samsung Health N/A
Universal Guide N/A
Gallery Yes
Convergence TV to Mobile - Mirroring N/A
Mobile to TV - Mirroring, DLNA Yes
NFC on TV N/A
Tap View N/A
Digital Butler N/A
Multi-View N/A
Sound Wall N/A
Personal Screen N/A
Remote Access Yes
Camera Support N/A
360 Video Player N/A
360 Camera Support N/A
Bluetooth Low Energy N/A
WiFi Direct Yes
TV Sound to Mobile N/A
Sound Mirroring N/A
Localization Tune Station N/A
Auto Hotspot Connect N/A
S-Share N/A
Auto Data Backup N/A
2-3
2. Product specifications
Item UE43T5300AUXCE
2-4
2. Product specifications
Item UE43T5300AUXCE
AI Streaming N/A
AI Upscale N/A
Auto Rotation N/A
Art Mode (The Frame) N/A
Motion Detection (The Frame) N/A
Ambient Mode N/A
Brightness/Color Detection Brightness Detection
Portrait Mode N/A
UK English, German, French, Spanish, Italian, Dutch,
Accessibillity - Voice Guide Polish, Danish, Swedish, Finnish, Norwegian, Portuguese,
Russian
UK English, German, French, Spanish, Italian, Dutch,
Accessibility - Learn TV Remote / Learn
Polish, Danish, Swedish, Finnish, Norwegian, Portuguese,
Menu Screen
Russian
Accessibility - Others Enlarge / High Contrast / Slow Button Repeat
Ultra Clean View Yes
Digital Clean View Yes
Auto Channel Search Yes
Auto Power Off Yes
Caption (Subtitle) Yes
Connect Share™ (HDD) Yes
ConnectShare™ (USB 2.0) Yes
EPG Yes
Extended PVR N/A
Game Mode Yes (Basic)
Freesync N/A
G-SYNC N/A
OSD Language 31 Languages
Picture-In-Picture N/A
BT HID Built-in N/A
USB HID Support Yes
Teletext (TTX) Yes
Time Shift N/A
V-Chip N/A
IPv6 Support Yes
MBR Support N/A
Eco Feature Eco Sensor Yes
Energy Efficiency Class A+
Power Power Supply 100-240 50/60
Power Consumption (Max) 120 W
2-5
2. Product specifications
Item UE43T5300AUXCE
2-6
2. Product specifications
2-3. Accessories
NOTE
• The items’ colours and shapes may vary depending on the models.
• Cables not included can be purchased separately.
• Check for any accessories hidden behind or in the packing materials when opening the box.
• The code number can be changed, see "Exploded Views" provided on the site.
• Warranty Card / Regulatory Guide (BN68-07844A / BN68-09371A) (Not available in some locations)
2-7
2. Product specifications
Service may not be launched at the same time as Samsung TV, and the availability may vary by region.
2-8
2. Product specifications
HDR
High-Dynamic Range levels up bright expression of your TV, so you can enjoy an immense spectrum of colors and visual
details, even in dark scenes.
PurColor
PurColor makes watching videos feel almost like you're there. It enables the TV to express a huge range of colors for
optimal picture performance, and an immersive viewing experience.
2-9
2. Product specifications
Remote Access
Get office work done on your TV at home. Remote Access lets you mirror your computer’s display on the TV screen
wirelessly. You can even tap into your office PC to access files or work on documents using Microsoft Office 365-all from
the comfort of your couch.
Remote connection to a PC running on Windows is only supported for Windows 7 or later. And the operation system
must be a Professional or higher edition.
Remote connection to a PC running on Mac is only supported for Mac OS X 10.5 or later.
2-10
2. Product specifications
Contrast Enhancer
Contrast Enhancer brings flat image to life by adjusting the contrast, offering outstanding picture quality with deeper
depth.
Slim
This beautifully slim design melts into any existing décor and elevates the style without taking it over.
2-11
Русский
2. Product specifications
Рус
2-5. About the Buttons on the Remote
Н
Кнопки
2-5-1. Theпульта
Remote дистанционного
Control управления
2-12
Қаз
Қаза
2. Product specifications
About the Buttons on the Remote Control Қаш
Number Description Нөм
P (Power)
1
Turns the TV on and off.
4 Alternately selects Teletext mode, Full TTX / Double TTX / Mix / Live TV.
$ Moves the cursor, selects the on-screen menu items, and changes the values seen on the TV's menu.
E (Select)
%
Selects or runs a focused item.
SETTINGS
Displays the main on-screen menu.
INFO
(
Displays information about the current programme or content.
AD/SUBT.
Displays the Accessibility Shortcuts.
) Use these buttons with specific features. Use these buttons according to the directions on the TV screen.
– The images, buttons, and functions of the remote control may differ depending on the model.
– This remote control has Braille points on the Power, Channel, Volume, and Select buttons and can be used by visually
impaired persons.
– If you use the remote control that comes with your TV to control another TV, some functions may not operate normally.
Б
Б
қо
Те
ф
2-13
2. Product specifications
SAMI .smi
SubRip .srt
SubViewer .sub
Xsub AVI
SubRip MKV
VobSub MKV
*jpg
JPEG 15360 x 8640
*jpeg
2-14
2. Product specifications
*.m4a
*.mpa MPEG4 AAC
*.aac
*.aif
AIFF AIFF
*.aiff
2-15
2. Product specifications
Bitrate
File format Container Video codecs Resolution Frame rate (fps) Audio codecs
(Mbps)
*.avi
H.264 BP/MP/HP
*.mkv 60 20
*.asf
HEVC (H.265 - Main, Main10)
*.wmv AVI Dolby Digital
*.mp4 MKV Motion JPEG 30 LPCM
*.mov ASF MVC ADPCM(IMA,
*.3gp MP4 MS)
MPEG4 SP/ASP
*.vro 3GP AAC
*.mpg MOV Window Media Video v9 HE-AAC
1920 x 1080 60
(VC1)
*.mpeg FLV WMA
*.ts VRO MPEG2 Dolby Digital+
20
*.tp VOB MPEG1 MPEG(MP3)
*.trp PS G.711(A-Law,
Microsoft MPEG-4 v1, v2, v3
*.flv TS μ-Law)
*.vob SVAF Window Media Video v7 OPUS
(WMV1), v8 (WMV2)
*.svi 30
*.m2ts H.263 Sorrenson
*.mts VP6
Other restrictions
• Codecs may not function properly if there is a problem with the content.
• Video content does not play or does not play correctly if there is an error in the content or container.
• Sound or video may not work if they have standard bit rates/frame rates above the TV’s compatibility ratings.
• If the Index Table is has an error, the Seek (Jump) function will not work.
• When playing video over a network connection, the video may not play smoothly because of data transmission speeds.
• Some USB/digital camera devices may not be compatible with the TV.
• HEVC codec is only available in MKV / MP4 / TS containers.
• The MVC codec is supported partly.
Video decoders
• H.264 is supported up to Level 4.1. (TV does not support FMO / ASO / RS)
• VC1 AP L4 is not supported.
• GMC 2 or above is not supported.
Audio decoders
• WMA is supported up to 10 Pro 5.1 channels, M2 profile.
• WMA1, WMA lossless / Voice are not supported.
• QCELP and AMR NB/WB are not supported.
• Vorbis is supported for up to 5.1 channels.
• Dolby Digital+ is supported for up to 5.1 channels.
• The supported sample rates are 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, and 48 KHz, and differ with the codec.
2-16
3. Disassembly and Reassemble
3-1. TV Disassembly
Description Picture Description
3-1
3. Disassembly and Reassemble
R L
directions 1→2→3.
Assembly Misc P-jig-2017
Jig Direction 2
Jig Direction 1
BN81-14946A
3-2
3. Disassembly and Reassemble
Locking Part
Top
• 43 inches
− Top : 7 point
− Left/Right : 6 point
− Bottom : 8 point
Right
Left
Bottom
▶ NETWORK-WLAN CLIENT
3-3
3. Disassembly and Reassemble
3-4
3. Disassembly and Reassemble
2. Use both hands to hold the board and slide to the Slide to the upwards to release the board
upwards to release the board.
3-5
3. Disassembly and Reassemble
NOTE
3-6
4. Troubleshooting
4. Troubleshooting
4-1. IR/FUNCTION Control
IR/FUNCTION
1 IR GND 2 IR Vcc
3 IR Vout 4 NC
5 LED Anode 6 SCL
<IR/FUNCTION Pins> 7 SDA 8 ALS VCC
<IR/FUNCTION Pins>
CN1203 (IR/FUNCTION)
<MAIN Board Pins> 1 IR 2 GND
3 A3.3V_PW 4 SENSOR_SCL_I2C
5 SENSOR_SDA_I2C 6 KEY_INPUT1
7 KEY_INPUT2 8 LED_STB_OUT_BS12
<Main Board Connector Function Pins>
• If missing:
9 Check KEY_INPUT1 (pin 6 ) change to 0V with a command.
• If wrong voltage or no change:
9 Check Switch for stuck or miss-operation.
5. Check IR (pin 1 ) operation with Standard Remote command changes. (3.3V to 2.5V effective DC)
6. Check SDA (pin 5 ), SCL (pin 4 ) for effective 3.3Vdc (after power on)
→ If missing suspect Function Assy/Cable Assy/Main Assy.
4-1
4. Troubleshooting
4-2. Power
4-2-1. SMPS Standby Test
• 43 inches
CNL802 (9Pin)
LED Connector
CNM803 (10Pin)
Main Connector (POWER)
FUSE
4-2
4. Troubleshooting
4-3
4. Troubleshooting
CNL802 (9Pin)
LED Connector
4-4
4. Troubleshooting
Backlight Test :
1. Activate Backlights Test : Disconnect Lead Cable from Main to Power Supply.
9 Check TV Screen for active backlight LEDs.
2. If No Backlights
9 Plus (+) & Minus (-) pin voltages on the Panel Connector.
4-5
4. Troubleshooting
4-3. Video
4-3-1. MAIN BOARD
• Main Section £ PANEL
Main Section
Video Operation
Generated on Main Section.
• If OK:
9 Source & Input Cables
9 Other inputs
• If Noisy:
9 Panel (defective)
4-6
4. Troubleshooting
PANEL
• If Noisy:
9 Panel (defective)
4-7
4. Troubleshooting
4-4. Audio
• Source £ Main Board £ Speakers
Source
• The picture is good but there is no sound.
9 Set Sound Output to TV Speaker.
→ £ Settings £ Sound £ Sound Output
• If Sound Test OK
9 Audio Source & External Cables
9 Other Inputs
Main Board
• No HDMI Audio
9 Source / HDMI Cable
→ Swap with other HDMI Inputs/Sources.
→ Perform EDID Write in Factory Mode (Can restore missing HDMI Audio).
9 Bulletins and Latest firmware on TV.
→ If not restored replace Main Board
→ Check Audio Format PCM/Dolby based on external Receiver
• ARC Issues
9 HDMI Cable is input to the ARC Designated HDMI port.
9 ARC (HDMI Control) is enabled on the external Receiver.
4-8
4. Troubleshooting
4-5. Network
When the TV has difficulties connecting to the Internet, these steps may help resolve the problem.
TV to Router "Failure"
1. Select the Network Status menu.
– View the current network and Internet status.
4-9
4. Troubleshooting
4-10
4. Troubleshooting
Wi-Fi Analyzer
2. Select Network under test.
4-11
4. Troubleshooting
NOTE
1. Connect a known good External LAN Cable and Router to the TV for testing.
• Verify connection : TV to router. (The Router to Internet will not connect in this test.)
3. The TV is OK if connection to the Router is verified.
4-12
4. Troubleshooting
4-13
4. Troubleshooting
£ Settings £ Support £ Device Care £ Self Diagnosis £ Smart Hub Connection Test
2. Select the number at the top of the screen to see the items below.
• Network / Gateway
→ If there is a problem, test your TV and router connections as this is a network problem. (Network Trouble
shooting)
• DNS Test
9 If it Fails:
→ DNS setting in "Network Settings"
9 If DNS is set manually:
→ Settings are correct (may be set to 8.8.8.8 to prevent Netflix issues)
9 If it still fails:
→ DNS Test with setting to Auto Mode
9 If it fails both Manual & Auto problem is ISP or Router.
• ISP Blocking
9 If it Fails:
→ Internet Service Provider is Active.
→ With DNS setting at 8888.
→ With Hot Spot.
4-14
4. Troubleshooting
4-15
4. Troubleshooting
4-16
4. Troubleshooting
Factory Remote
1. Power TV ON.
2. Select TV Source.
3. Info → Factory.
4. Use MENU for return.
AA81-00243A
(Service Remotes)
Samsung IR Remote
1. TV Power Standby.
2. Press as follows.
• Remote Button NTSC MUTE 1 8 2 POWER
Important Items
• Option (must set Option Bytes when replacing Main Board.)
• Option → Factory Reset (returns TV to out of box condition.)
– Must perform when replacing Main Board or Full One Connect)
• SVC → Info → ER Count (Important to check for errors.)
– Resets to 0 with Factory Reset.
9 Check before resetting TV
• SVC → Test Patterns (Use to check / troubleshoot) videos errors.
• Control → EDID (Use to Reset HDMI Operational Errors)
4-17
4. Troubleshooting
4-18
4. Troubleshooting
2 • BT Version
• E-Manual
• Blaster Version
• E-POP Version
• EDID Success (Status)
• HDCP Success (Status
3 • FRC
• Dimming
• T-CON
4 • Model
• Wired MAC Success
• Wireless MAC Success
• WiFi Version
4-19
4. Troubleshooting
Main IC
[Factory Mode]
1. Verify "Scaler Pattern" and "US Post Pattern". Scaler Pattern OFF
4-20
4. Troubleshooting
Option EDID
Control Sub Option
Debug Hotel Option
SVC Shop Option
FMS Asia Option
ADC/WB Sound
Advanced
EDID ON/OFF ON
4-21
4. Troubleshooting
Important Items
9 WD Count: Watch Dog
→ Hardware related issue.
9 AR Count: Auto Reset
→ Software (i.e. Apps) related.
9 WiFi Count: Check all listed items
9 BT Count: Check all listed items
9 VCC Fail Count
→ Check all listed items.
4-22
4. Troubleshooting
Type
• Check Panel label (located in the back chassis of panel) and choose same Type code from the list.
55A1QU7QN 55L1QU7QN
75L1QU7QN 55A1QU8XN
55L1QU7QN 55A1QU7QN
65A1QU9TR 65L1MU9TN
43L6AF0JN
65L1QU9TR 65L1QU7QN
65A1QU8XN 65L1QU8XN
55A6AU0NN 82A1QU9TR
4-23
4. Troubleshooting
Writing Type
• For Quick Entry of Type.
6. Writing Type Success appears in the Option Table. Local Set CIS_CA_UZ
– If the model Type you entered doesn’t exist it will not SW Model UT530E
load.
<Select Writing Type>
– If you entered over 10 digits an Information screen box is
full appears.
7. Complete rest of Option Byte Table info.
8. Press soft power off with remote to enter settings.
NOTE
43L6AF0JN
If you made a mistake you can unplug the TV to prevent info
from changing options.
Information
The box is full. You can't enter any more text.
OK
Local Set
• Set according to Local region(country).
4-24
4. Troubleshooting
SW Model
• Check Label Rating of the TV (located on the Rear Cover).
– SW Model is digits after "/" in Version No.
– Choose same SW Model code from the list.
URU7300R QNQ6F
QRQ60T QNQ75C
URU8000F QRQ80C
URU7000JJ QRQ900Z
<"SW Model" in Label Rating> URU7100H QRQ90B
4-25
4. Troubleshooting
Front Color
• Check Label Rating of the TV (located on the Rear Cover).
QTQ80D-Q49TD1 QTQ950SA-Q85TA1
QTQ80D-Q55TD1 QTQ800B-Q65TB1
QTQ80D-Q65TD1 QTQ800B-Q75TB2
QTQ90C-Q55TC1 QTQ60F-Q50TF1
4-26
4. Troubleshooting
Model Code
• For Quick Entry of Model Code.
1. Confirm Model Code from Option Byte Table for your TV.
Home Updates Exit
2. Select Model Code.
Factory Reset
3. "Set Model Code" appears.
Type 43L6AF0JN
4. Enter exact Model Code using cursors.
5. If you entered over 19 digits an Information screen box is full Writing Type
appears. Local Set CIS_CA_UZ
– IMPORTANT: It will accept wrong model code, be sure to
SW Model UT530E
enter correct code
6. Complete rest of Option Byte Table info. Front Color UT5300L-U43TL1
7. Press soft power off with remote to enter settings. Writing Front Color
Model Code UE43T5300AUXCE
TUNER
<Select Model Code>
UE43T5300AUXCE
Information
The box is full. You can't enter any more text.
QN65Q60TAFXZA
OK
4-27
4. Troubleshooting
If you replace the main board with new one, please change the factory option as well.
The options you must change are "Type".
UE43T5300AUXCE
• PANEL / SMPS / MAIN Information
BN07-01588A BN44-00852F
BC02 AUO 43L6AF0JN DYREL BN91-21854S BN94-15341U
CY-JN043BGAB1V L48MSFR_MDY
4-28
4. Troubleshooting
Factory Reset -
Writing Type
SW Model UT530E
TUNER - • DVB-T2CS2
Ch Table NONE
MRT Option
Production Option
Engineer Option
Control
Factory Menu Name Data Range
EDID
EDID ON/OFF OFF
EDID WRITE PC …
Sub Option
RS-232 Jack UART
Watchdog ON
Checksum 0x0000
4-29
4. Troubleshooting
OPTION_SWU
CDD mode …
BP PMS Reset 1
FAnet Thread 2
CI CPLD Version 1
ACM_MC ON
UNIQUE TRIPLET ON
FS_FAV OFF
OCM Reboot ON
SPI Protection
OCM Support ON
Preloading Support ON
Multitasking Support ON
Hotel Option
Hospitality Mode OFF
4-30
4. Troubleshooting
Menu OSD
Operation
Music Mode
External Source
Eco Solution
Cloning
Shop Option
Exhibition Mode OFF
Peak Mode ON
Metadata ON
Asia Option
Unbalance OFF
AF Level adjust 0
TX Power Level 0
H Shaking 0
SOUND
High Devi OFF *If the broadcast signal is not good, TV will complement
the characteristics of the signal (most use when weak
signal comes from the growing area countries)
Pilot Level High Thld 0x20h * The High threshold value of stereo signal(If Pilot level
is greather than High threshold value, recognize Stereo
signal)
Pilot Level Low THLD 0x10h * The Low threshold value of stereo signal(If Pilot
level is less than Low threshold value, recognize Mono
signal)
Subwoofer Support 3
Woofer Type 0
4-31
4. Troubleshooting
Speaker EQ ON
AudioDock BT Delay 90
3D_Glass BT delay 50
India Sound 0
Lipsync Inx 1
TP volume 0xc4h
TP Scale 0x6ch
TP EQ CheckSum NONE
Debug
Factory Menu Name Data Range
Spread Spectrum
LVDS Spread 0
DDR Spread 0
Period 0
Amplitude 0
P eBus Value 0
4-32
4. Troubleshooting
AP Vx1 Value 12
N Vx1 Value 0
DDR Margin
A CTRL_OFFSET_0_3 0
A CTRL_OFFSET_D 0
B CTRL_OFFSET_0_3 0
B CTRL_OFFSET_D 0
BT_ON_OFF ON
FRC
FRC FDISPLAY ON/OFF OFF
4-33
4. Troubleshooting
TCON
TCON_TEMP READ 34
Panel Code 1
Panel Code 2
Panel Revision
Panel S/N 1
Panel S/N 2
Panel S/N 3
Panel S/N 4
MPEG Margin
H.264 Margin
Voice Debug
Power Management
Cert Option
RM_BIST_DTV
RM_BIST_ATV
RM_BIST_CABLE
SerDES Check
SerDES Tuner
HDMI SW Failure
HDMI Rx Failure
MP Failure
Stress Mode
Log Analyzer
DeadLock KILL
4-34
4. Troubleshooting
CES Option
BT DUT
BT Throughput
Reproduce Module
21_9
L-DETECT STABLE TIME 7
DB Download
MRT Option Dump Failure
Alert Option
SVC
Factory Menu Name Data Range
Info
Reset
Apps Reset
SVC Reset
OPTION_HDMI
DVI/HDMI SOUND Auto
4-35
4. Troubleshooting
HDMI ROBIN 0
HDMI Callback ON
HDMI EQ 0
HDMI Switch 0
H Write 0
HDMI Sync 0
HDMI 3D DET 1
SPI VERSION 0
HdmiRx EQ 0
DVB CI
TS Clock delay TC 0
TS Clock delay S 0
CI Control Buf ON ON
TS Clock delay S2 0
4-36
4. Troubleshooting
Test Pattern
Scaler Pattern OFF
Upgrade
T-CON DATA UPGRADE
T-CON FW UPGRADE
T-CON CheckSum
T-CON2 CheckSum
BT UPGRADE
BT FREEPAIRING
Function Upgrade
FRC3D FW UPGRADE
FRC3D LD UPGRADE
FRC2 3D FW UPGRADE
Jump UPGRADE
IR Blaster Upgrade
4-37
4. Troubleshooting
NTV CU UPDATE
CI CPLD Upgrade
SC ADK Upgrade
Other Setting
Delete S/N
IPERF Stopped
Expert
NTV CU FW VER 0
Apps Update
SMCE Control
Motor Test
Cube Test
V APP OFF
S/N
Serial number
Writing S/N
ADC/WB
Factory Menu Name Data Range
ADC
AV Calibaration
4-38
4. Troubleshooting
PC Calibration
HDMI Calibration
ADC Result
1st_Y_GH 0
1st_Y_GL 0
1st_Cb_BH 0
1st_Cb_BL 0
1st_Cr_RH 0
1st_Cr_RL 0
2nd_R_L 128
2nd_G_L 128
2nd_B_L 128
2nd_R_H 69
2nd_G_H 69
2nd_B_H 69
White Balance
R-Offset 128
G-Offset 128
B-Offset 128
R-Gain 128
G-Gain 128
B-Gain 128
WB-W2_R_Offset 128
WB_W2_B_Offset 128
WB_W2_R_Gain 136
WB_W2_B_Gain 76
WB_N_R_Offset 128
WB_N_B_Offset 128
WB_N_R_Gain 131
WB_N_B_Gain 119
MGA
MGA On/Off OFF
R1_Gain
G1_Gain
B1_Gain
R2_Gain
4-39
4. Troubleshooting
B2_Gain
R3_Gain
G3_Gain
B3_Gain
R4_Gain
G4_Gain
B4_Gain
R5_Gain
G5_Gain
B5_Gain
R6_Gain
G6_Gain
B6_Gain
R7_Gain
G7_Gain
B7_Gain
R8_Gain
G8_Gain
B8_Gain
R9_Gain
G9_Gain
B9_Gain
R10_Gain
G10_Gain
B10_Gain
SPI R-Offset
SPI G-Offset
SPI B-Offset
SPI R-Gain
SPI G-Gain
SPI B-Gain
SPI N Rgain
SPI N Bgain
SPI N Roffset
4-40
4. Troubleshooting
SPI W2 Rgain
SPI W2 Bgain
SPI W2 Roffset
SPI W2 Boffset
SPI MGA
WB Data to SPI
Advanced
4-41
4. Troubleshooting
4-42
4. Troubleshooting
4-43
4. Troubleshooting
4-44
4. Troubleshooting
4-45
4. Troubleshooting
Apply Picture Mode All Sources 0x0f 0x00 0x00 0x00 fixed command
4-46
4. Troubleshooting
4-47
4. Troubleshooting
High 0x03
Sound TV Installation Type Stand 0x0c 0x00 0x00
Wallmount 0x01
Audio Delay Dealy Value 0~250
0x0d 0x00
(0~250) (0x00~0xFA)
KEY Key Generation *Refer for
0x0d 0x00 0x00
Table
OSD Show/Hide Control Show 0x0e 0x00 0x00 0x00
Hide 0x01
Get Power (On/Off)
0xf0 0x00 0x00 0x00
Status
Volume(0~100) 0xf0 0x01 0x00 0x00
Mute (On/Off) 0xf0 0x02 0x00 0x00
Channel Number 0xf0 0x03 0x00 0x00
Source (TV/AV/…/HDMI/…) 0xf0 0x04 0x00 0x00
Picture Size 0xf0 0x05 0x00 0x00
3D (On/Off) 0xf0 0x06 0x00 0x00
Picture Mode 0xf0 0x07 0x00 0x00
Sound Mode 0xf0 0x08 0x00 0x00
Up 96 (0x60)
Down 97 (0x61)
Right 98 (0x62)
Menu 26 (0x1A)
EXIT 45 (0x2D)
4-48
4. Troubleshooting
DO NOT turn off the TV’s power until the update is complete. The TV will turn off and on automatically
after completing the software update. Video and audio settings will be reset to their defaults after a
CAUTION software update.
After downloading the update file from the Samsung website and storing it on a USB device, connect the USB device to
the TV to update.
To update using a USB device, download the update package from Samsung.com to your computer. Then, save the update package
in the USB device's top-level folder. Otherwise, the TV will not be able to locate the update package.
If the TV is connected to the Internet, you can have the TV update its software automatically while you are watching the TV.
When the background update is completed, it is applied the next time the TV is turned on.
If you agree to the Smart Hub terms and conditions, Auto Update is set to On automatically. If you want this function
disabled, use the Select button to turn it off.
This function may take a longer time if another network function is running concurrently.
4-49
4. Troubleshooting
1. If your TV is connected to the Internet, you can set it to receive periodic updates automatically. On the remote control,
press the button and move to Settings using the directional button.
Settings
2. To enable automatic updates, select £ Settings £ Support £ Software Update £ Auto Update.
Support
Software Update
Support
3. If your TV is not connected to the Internet, you can update the software using a USB drive.
No Access
Network
Settings
Settings
4-50
4. Troubleshooting
4. Select £ Settings £ Support £ About This TV and check the model code and software version.
Settings
5. Select £ Settings £ Support £ About This TV and check the model code and software version.
Support
6. Select £ Settings £ Support £ About This TV check the model code and software version.
About This TV
Model code:
Software version:
4-51
4. Troubleshooting
firmware file.
firmware file.
9. Find your TV model and download the firmware file.
firmware file.
firmware file.
10. Click Download to download the firmware.
Firmware Download
firmware.
firmware.
11. Unzip the downloaded file and store it in your USB drive top folder.
file
4-52
file
file 4. Troubleshooting
12. Unzip the downloaded file and store it in your USB drive top folder.
file
file
13. Insert the USB device into the USB slot on the back of your TV or the side of the One Connect Box.
USB
USB
USB
USB
USB
USB
14. The firmware update begins automatically. Your TV will automatically powercycle when the firmware update is
completed. Do not turn off your TV while the firmware update is in progress.
Update now
firmware update begins automatically. Your TV will automatically powercycle when the firmware
firmware update begins automatically. Your TV will automatically powercycle when the firmware
completed. Do not turn off your TV while the firmware update is in progress.
completed. Doselect
15. After your TV turns on, not turn off£your TV while the£firmware
Settings Supportupdate is in progress.
£ About This TV and check the new firmware version.
Settings
Settings
After your TV turns on, select and check the new firmware version.
After your TV turns on, select and check the new firmware version.
Support
Support
4-53
4. Troubleshooting
Support
After your TV turns on, select and check the new firmware version.
17. After your TV turns on, select £ Settings £ Support £ About This TV and check the new firmware version.
About This TV
Model code:
Software version:
firmware
4-54
5. Wiring Diagram
5. Wiring Diagram
5-1. Wiring Diagram
• 43 inches
CNL802
CNM803
CN201_SMPS
CN1602_FHD
MAIN SMPS
CN1102
CN1203 CN1201
WiFi
SPEAKER SPEAKER
IR/FUNCTION
• 43 inches_inner
5-1
5. Wiring Diagram
5-2. Connector
5-2-1. Main Board
1 CN1301
(19Pin)
(HDMI IN 1)
0 CN201_SMPS
(10Pin)
(POWER)
2 CN1401_U
(4Pin) LEAD CONNECTOR-
(USB) POWER
3 CN1302
(19Pin)
(HDMI IN 2)
! CN1602_FHD
(51Pin)
(LVDS)
4 CN1001_COMP FFC CABLE
(COMPONENT/ (5Pin)
AV IN)
5 CN1603_LAN
(8Pin)
(LAN)
6 OP1101_OP
(3Pin)
(OPTICAL)
9 CN1102
(4Pin)
(SPEAKER)
TU803_DS
(ANT IN)
(8Pin) (10Pin)
7 CN1203 8 CN1201
(IR/FUNCTION) (WIFI/BT_COMBO)
LEAD CONNECTOR-SUB ASSY LEAD CONNECTOR-SUB ASSY
5-2
5. Wiring Diagram
4 SENSOR_SCL_I2C 8 LED_STB_OUT_BS12
8 CN1201 (WIFI/BT_COMBO)
1 WIFI_NRESET 6 D+_USB_WIFI
2 WIFI_WOL 7 GND
3 WIFI_5V_PW 8 WIFI_PHY_ON
4 GND 9 UART_TX_DB
5 D-_USB_WIFI 10 BT_WAKE
9 CN1102 (Speaker)
1 WIFI_NRESET 6 D+_USB_WIFI
2 WIFI_WOL 7 GND
5-3
5. Wiring Diagram
• 43 inches
2 CNL802 (9Pin)
1 CNM803
(10Pin)
(To Main Board)
LEAD CONNECTOR-POWER
5-4
5. Wiring Diagram
5-3. Cables
• 43 inches
CN1602_FHD 2
MAIN FFC CABLE (51Pin) SMPS
CN1102
CN1203 CN1201
4
LEAD CONNECTOR-
LEAD CONNECTOR-
SUB ASSY (10Pin) 3
SUB ASSY (8Pin)
WiFi
SPEAKER SPEAKER
IR/FUNCTION
LEAD CONNECTOR-POWER
1 10P/L400 43" BN39-02275B
MAIN - SMPS
FFC CABLE
2 51P/L450 43" BN96-43790F
MAIN - Source
5-5
6.Dimension
6. Dimension
NOTE
• The displayed image may differ from your TV, depending on the model.
1 4
2 3
(Unit: mm)
Model Name 1 2 3 4 5
UE43T5300A 979.9 571.9 596.6 77.3 170.3
6-1
6. Dimension
(Unit: mm)
Model Name VESA screw hole specs (1 x 2)
UE43T5300A 200 x 200
6-2