Professional Documents
Culture Documents
STEEL
DOOR
INSTITUTE
STEEL DOOR INSTITUTE
30200 DETROIT ROAD • CLEVELAND, OHIO 44145
© 2005 Steel Door Institute
SDI 129-04
E
CL
3 1/2" x 3 1/2"
Hinge
Frame
A
D F
Hinge
Opening Spacing
Height CL
1/8
1/16
B
Strike G
CL
C 1 3/8
Door
MANUFACTURER A B C D E F G
6'-8" 10-3⁄8" 59-7⁄8"
6'-10" 12-3⁄8" 59-7⁄8"
7'-0" 14-3⁄8" 59-7⁄8"
7'-2" 16-3⁄8" 59-7⁄8"
AMWELD 6'-8"
40-⁄"
10-3⁄8" 2 @ 29-⁄"
9-3⁄4" ⁄" 1⁄4"
6'-10" 12-3⁄8" 2 @ 29-⁄"
7'-0" 14-3⁄8" 2 @ 29-⁄"
7'-2" 16-3⁄8" 2 @ 29-⁄"
6'-8" 2 @ 29-⁄"
CECO (1) 7'-0" 40-⁄" 10-3⁄8" 2 @ 31-⁄" 9-3⁄4" ⁄" N/A
7'-2" 2 @ 32-⁄"
6'-8" 10-3⁄8" 2 @ 29-⁄"
6'-10" 10-3⁄8" 2 @ 30-⁄"
7'-0" 10-3⁄8" 2 @ 31-⁄"
7'-2" 10-3⁄8" 2 @ 32-⁄"
CURRIES (2) 7'-4" 40-⁄" 10-3⁄8" 2 @ 33-⁄" 9-3⁄4" ⁄" 1⁄4"
7'-6" 10-3⁄8" 2 @ 34-⁄"
7'-8" 10-1⁄4" 3 @ 24"
7'-10" 10-3⁄8" 3 @ 24-5⁄8"
8'-0" 10-1⁄8" 3 @ 25-3⁄8"
6'-8" 61-1⁄2"
6'-10" 2 @ 31-3⁄4"
DEANSTEEL 7'-0"
40-⁄" 11-3⁄4"
2 @ 32-3⁄4"
6-3⁄4" ⁄" 1⁄4"
7'-2" 2 @ 33-3⁄4"
Cautionary Statement
The hinge and strike spacings presented in this brochure are intended as a reference to inform the reader of
the standard locations used in the manufacture of steel doors and frames by SDI member companies for the
opening sizes shown.
The user must be aware that these spacings shall not be relied upon when retrofitting doors or frames to an
existing installation. Field verification of hinge and strike spacings in this situation is necessary.
Dimensions listed are valid at the time of publication. However, manufacturers do periodically revise their hinge
and strike spacing, therefore, the SDI strongly recommends that individual manufacturers be contacted to verify
dimensions.
The Steel Door Institute and its member companies shall not be held liable for products manufactured using the
information published here.
1
SDI 129-04
MANUFACTURER A B C D E F G
6'-8" 60-1⁄8"
6'-10" 62-1⁄8"
7'-0" 2 @ 32-⁄"
7'-2" 2 @ 33-⁄"
KEWANEE 7'-4" 40-⁄" 10-1⁄4" 2 @ 34-⁄" 9-5⁄8" 1⁄4" ⁄"
7'-6" 2 @ 35-⁄"
7'-8" 3 @ 24-⁄", 24", 24-⁄"
7'-10" 3 @ 24-⁄", 24-3⁄4", 24-⁄"
8'-0" 3 @ 25-3⁄8"
6'-8" 61-1⁄2"
MESKER 7'-0" 40-⁄" 11-3⁄4" 2 @ 32-3⁄4" 6-3⁄4" 1⁄4" ⁄"
7'-2" 2 @ 33-3⁄4"
6'-8" 11-3⁄4" 2 @ 30-3⁄4"
6'-10" 11-3⁄4" 2 @ 31-3⁄4"
7'-0" 11-3⁄4" 2 @ 32-3⁄4"
7'-2" 11-3⁄4" 2 @ 33-3⁄4"
PIONEER 7'-4" 38" 11-3⁄4" 2 @ 34-3⁄4" 6-3⁄4" ⁄" ⁄"
7'-6" 11-⁄" 3 @ 23-⁄"
7'-8" 11-3⁄4" 3 @ 24-1⁄2"
7'-10" 11-⁄" 3 @ 25-⁄"
8'-0" 11-⁄" 3 @ 25-⁄"
6'-8" 10-3⁄8" 2 @ 29-⁄" 9-3⁄4"
6'-10" 12-1⁄4" 2 @ 31-1⁄4" 7-1⁄4"
7'-0" 12-3⁄8" 2 @ 29-⁄" 11-3⁄4"
7'-2" 12-3⁄8" 2 @ 30-⁄" 11-3⁄4"
REPUBLIC 7'-4" 40-⁄" 12-1⁄4" 2 @ 34-1⁄4" 7-1⁄4" ⁄" 1⁄4"
7'-6" 12-1⁄4" 2 @ 35-1⁄4" 7-1⁄4"
7'-8" 12-3⁄8" 3 @ 24-1⁄8" 7-1⁄4"
7'-10" 12-1⁄8" 3 @ 24-7⁄8" 7-1⁄4"
8'-0" 12-1⁄4" 3 @ 25-1⁄2" 7-1⁄4"
SECURITY
METAL — — — — — — —
PRODUCTS (3)
6'-8" 59-7⁄8"
7'-0" 2 @ 31-⁄"
STEELCRAFT 7'-2" 40-⁄" 10-3⁄8" 2 @ 32-⁄" 9-3⁄4" ⁄" 1⁄4"
7'-10" 3 @ 24-5⁄8"
8'-0" 3 @ 25-⁄"
Notes:
(1)
Does not manufacturer 1-3⁄8" thick steel doors. Steel frames are manufacturered for 1-3⁄8" thick wood doors.
(2)
Doors of all heights are also available with two hinges. C & E dimensions are same as shown.
(3)
Does not manufacture 1-3⁄8" thick steel doors. Steel frames for 1-3⁄8" thick wood doors are manufactured by special ar-
rangement only.
2
SDI 129-04
MANUFACTURER A B C D E F G H J
6'-8" 10-3⁄8" 2 @ 29-⁄"
6'-10" 8-3⁄8" 2 @ 31-⁄"
7'-0" 10-3⁄8" 2 @ 31-⁄"
7'-2" 12-3⁄8" 2 @ 31-⁄"
AMWELD 7'-4" 40-⁄" 10-3⁄8" 2 @ 33-⁄" 9-3⁄4" ⁄" ⁄" ⁄" 1⁄8"
7'-6" 12-3⁄8" 2 @ 33-⁄"
7'-8" 10-⁄" 3 @ 23-⁄"
7'-10" 8-⁄" 3 @ 25-⁄"
8'-0" 10-⁄" 3 @ 25-⁄"
6'-8" 12-1⁄4" 2 @ 30-1⁄4"
6'-10" 14-1⁄4" 2 @ 30-1⁄4"
7'-0" 12-1⁄4" 2 @ 32-1⁄4"
7'-2" 14-1⁄4" 2 @ 32-1⁄4"
BENCHMARK 7'-4" 40-⁄" 12-1⁄4" 2 @ 34-1⁄4" 7-1⁄4" 1⁄3" 1⁄4" 1⁄8" ⁄"
7'-6" 14-1⁄4" 2 @ 34-1⁄4"
7'-8" 8-1⁄4" 3 @ 25-1⁄2"
7'-10" 10-1⁄4" 3 @ 25-1⁄2"
8'-0" 12-1⁄4" 3 @ 25-1⁄2"
6'-8" 2 @ 31"
6'-10" 2 @ 32"
7'-0" 2 @ 33"
7'-2" 2 @ 34"
CECO 7'-4" 41-⁄" 9" 2 @ 35" 9" ⁄" 1⁄4" 1⁄8" ⁄"
7'-6" 2 @ 36"
7'-8" 3 @ 24-1⁄3"
7'-10" 3 @ 25-1⁄6"
8'-0" 3 @ 26"
6'-8" 12-1⁄4" 2 @ 30-1⁄4"
6'-10" 12-1⁄4" 2 @ 31-1⁄4"
7'-0" 12-1⁄4" 2 @ 32-1⁄4"
7'-2" 12-1⁄4" 2 @ 33-1⁄4"
CURRIES 7'-4" 40" 12-1⁄4" 2 @ 34-1⁄4" 7-1⁄4" ⁄" 1⁄4" 1⁄8" ⁄"
7'-6" 12-1⁄4" 2 @ 35-1⁄4"
7'-8" 12-3⁄8" 3 @ 24-1⁄8"
7'-10" 12-1⁄8" 3 @ 24-7⁄8"
8'-0" 12-1⁄4" 3 @ 25-1⁄2"
6'-8" 2 @ 30-1⁄4"
6'-10" 2 @ 31-1⁄4"
7'-0" 2 @ 32-1⁄4"
7'-2" 2 @ 33-1⁄4"
DEANSTEEL 7'-4" 40-⁄" 12-1⁄4" 2 @ 34-1⁄4" 7-1⁄4" ⁄" 1⁄4" 1⁄8" ⁄"
7'-6" 2 @ 35-1⁄4"
7'-8" 24-1⁄8", 24-1⁄4", 24-1⁄8"
7'-10" 24-7⁄8", 24-3⁄4", 24-7⁄8"
8'-0" 3 @ 25-1⁄2"
3
SDI 129-04
MANUFACTURER A B C D E F G H J
6'-8" 2 @ 30-⁄"
6'-10" 2 @ 31-⁄"
7'-0" 2 @ 32-⁄"
7'-2" 2 @ 33-⁄"
KEWANEE 7'-4" 40-⁄" 10-1⁄4" 2 @ 34-⁄" 9-5⁄8" 3⁄8" 1⁄4" ⁄" 1⁄8"
7'-6" 2 @ 35-⁄"
7'-8" 24-⁄", 24", 24-⁄"
7'-10" 24-⁄", 24-3⁄4", 24-⁄"
8'-0" 3 @ 25-3⁄8"
6'-8" 12-1⁄4" 2 @ 30-1⁄4"
6'-10" 12-1⁄4" 2 @ 31-1⁄4"
7'-0" 12-1⁄4" 2 @ 32-1⁄4"
7'-2" 12-1⁄4" 2 @ 33-1⁄4"
MESKER 7'-4" 40-⁄" 12-1⁄4" 2 @ 34-1⁄4" 7-1⁄4" ⁄" 1⁄4" 1⁄8" ⁄"
7'-6" 12-1⁄4" 2 @ 35-1⁄4"
7'-8" 11-1⁄4" 3 @ 24-1⁄2"
7'-10" 10-1⁄4" 3 @ 25-1⁄2"
8'-0" 12-1⁄4" 3 @ 25-1⁄2"
6'-8" 12-1⁄4" 2 @ 30-1⁄4"
6'-10" 12-1⁄4" 2 @ 31-1⁄4"
7'-0" 12-1⁄4" 2 @ 32-1⁄4"
7'-2" 12-1⁄4" 2 @ 33-1⁄4"
PIONEER 7'-4" 38" 12-1⁄4" 2 @ 34-1⁄4" 7-1⁄4" ⁄" ⁄" ⁄" ⁄"
7'-6" 12-1⁄4" 3 @ 23-1⁄2"
7'-8" 12-⁄" 3 @ 24-⁄"
7'-10" 12-⁄" 3 @ 24-⁄"
8'-0" 12-1⁄4" 3 @ 25-1⁄2"
6'-8" 10-3⁄8" 2 @ 29-⁄" 9-3⁄4"
6'-10" 12-1⁄4" 2 @ 31-1⁄4" 7-1⁄4"
7'-0" 12-3⁄8" 2 @ 29-⁄" 11-3⁄4"
7'-2" 12-3⁄8" 2 @ 30-⁄" 11-3⁄4"
REPUBLIC 7'-4" 40-⁄" 12-1⁄4" 2 @ 34-1⁄4" 7-1⁄4" ⁄" 1⁄4" 1⁄8" ⁄"
7'-6" 12-1⁄4" 2 @ 35-1⁄4" 7-1⁄4"
7'-8" 12-3⁄8" 3 @ 24-1⁄8" 7-1⁄4"
7'-10" 12-1⁄8" 3 @ 24-7⁄8" 7-1⁄4"
8'-0" 12-1⁄4" 3 @ 25-1⁄2" 7-1⁄4"
6'-8" 12-1⁄4" 2 @ 30-1⁄4"
6'-10" 12-1⁄4" 2 @ 31-1⁄4"
7'-0" 12-1⁄4" 2 @ 32-1⁄4"
SECURITY 7'-2" 12-1⁄4" 2 @ 33-1⁄4"
METAL 7'-4" 40-⁄" 12-1⁄4" 2 @ 34-1⁄4" 7-1⁄4" 3⁄8" 1⁄4" ⁄" 1⁄8"
PRODUCTS 7'-6" 10-1⁄4" 2 @ 36-1⁄4"
7'-8" 12-1⁄4" 3 @ 24-1⁄6"
7'-10" 12-1⁄4" 3 @ 24-⁄"
8'-0" 12-1⁄4" 3 @ 25-1⁄2"
6'-8" 2 @ 29-⁄"
6'-10" 2 @ 30-⁄"
7'-0" 2 @ 31-⁄"
7'-2" 2 @ 32-⁄"
STEELCRAFT 7'-4" 40-⁄" 10-3⁄8" 2 @ 33-⁄" 9-3⁄4" ⁄" 1⁄4" 1⁄8" ⁄"
7'-6" 2 @ 34-⁄"
7'-8" 3 @ 23-1⁄6"
7'-10" 3 @ 24-5⁄8"
8'-0" 3 @ 25-⁄"
4
SDI 129-04
MANUFACTURER A B C D E F G H J
6'-8" 10-3⁄8" 2 @ 29-⁄"
6'-10" 8-3⁄8" 2 @ 31-⁄"
7'-0" 10-3⁄8" 2 @ 31-⁄"
7'-2" 12-3⁄8" 2 @ 31-⁄"
AMWELD 7'-4" 40-⁄" 10-3⁄8" 2 @ 33-⁄" 9-3⁄4" ⁄" ⁄" ⁄" 1⁄8"
7'-6" 12-3⁄8" 2 @ 33-⁄"
7'-8" 10-⁄" 3 @ 23-⁄"
7'-10" 8-⁄" 3 @ 25-⁄"
8'-0" 10-⁄" 3 @ 25-⁄"
6'-8" 2 @ 31"
6'-10" 2 @ 32"
7'-0" 2 @ 33"
7'-2" 2 @ 34"
CECO 7'-4" 41-⁄" 9" 2 @ 35" 9" ⁄" 1⁄4" 1⁄8" ⁄"
7'-6" 2 @ 36"
7'-8" 3 @ 24-1⁄3"
7'-10" 3 @ 25-1⁄6"
8'-0" 3 @ 26"
6'-8" 12-1⁄4" 2 @ 30-1⁄4"
6'-10" 12-1⁄4" 2 @ 31-1⁄4"
7'-0" 12-1⁄4" 2 @ 32-1⁄4"
7'-2" 12-1⁄4" 2 @ 33-1⁄4"
CURRIES 7'-4" 40" 12-1⁄4" 2 @ 34-1⁄4" 7-1⁄4" ⁄" 1⁄4" 1⁄8" ⁄"
7'-6" 12-1⁄4" 2 @ 35-1⁄4"
7'-8" 12-3⁄8" 3 @ 24-1⁄8"
7'-10" 12-1⁄8" 3 @ 24-7⁄8"
8'-0" 12-1⁄4" 3 @ 25-1⁄2"
6'-8" 2 @ 30"
6'-10" 2 @ 31"
7'-0" 2 @ 32"
7'-2" 2 @ 33"
DEANSTEEL 7'-4" 40-⁄" 12-1⁄2" 2 @ 34" 7-1⁄2" ⁄" 1⁄4" 1⁄8" ⁄"
7'-6" 2 @ 35"
7'-8" 3 @ 24"
7'-10" 24-5⁄8", 24-3⁄4", 24-5⁄8"
8'-0" 25-3⁄8", 25-1⁄4", 25-3⁄8"
6'-8" 2 @ 30-⁄"
6'-10" 2 @ 31-⁄"
7'-0" 2 @ 32-⁄"
7'-2" 2 @ 33-⁄"
KEWANEE 7'-4" 40-⁄" 10-1⁄4" 2 @ 34-⁄" 9-5⁄8" 3⁄8" 1⁄4" ⁄" 1⁄8"
7'-6" 2 @ 35-⁄"
7'-8" 24-⁄", 24", 24-⁄"
7'-10" 24-⁄", 24-3⁄4", 24-⁄"
8'-0" 3 @ 25-3⁄8"
5
SDI 129-04
MANUFACTURER A B C D E F G H J
6'-8" 12-1⁄4" 2 @ 30-1⁄4"
6'-10" 12-1⁄4" 2 @ 31-1⁄4"
7'-0" 12-1⁄4" 2 @ 32-1⁄4"
7'-2" 12-1⁄4" 2 @ 33-1⁄4"
MESKER 7'-4" 40-⁄" 12-1⁄4" 2 @ 34-1⁄4" 7-1⁄4" ⁄" 1⁄4" 1⁄8" ⁄"
7'-6" 12-1⁄4" 2 @ 35-1⁄4"
7'-8" 11-1⁄4" 3 @ 24-1⁄2"
7'-10" 10-1⁄4" 3 @ 25-1⁄2"
8'-0" 12-1⁄4" 3 @ 25-1⁄2"
6'-8" 12-1⁄2" 2 @ 30"
6'-10" 12-1⁄2" 2 @ 31"
7'-0" 12-1⁄2" 2 @ 32"
7'-2" 12-1⁄2" 2 @ 33"
PIONEER 7'-4" 38" 12-1⁄2" 2 @ 34" 7-1⁄2" ⁄" ⁄" ⁄" ⁄"
7'-6" 12-⁄" 3 @ 23-⁄"
7'-8" 12-1⁄2" 3 @ 24"
7'-10" 12-5⁄8" 3 @ 24-5⁄8"
8'-0" 12-⁄" 3 @ 25-⁄"
6'-8" 10-3⁄8" 2 @ 29-⁄" 9-3⁄4"
6'-10" 12-1⁄4" 2 @ 31-1⁄4" 7-1⁄4"
7'-0" 12-3⁄8" 2 @ 29-⁄" 11-3⁄4"
7'-2" 12-3⁄8" 2 @ 30-⁄" 11-3⁄4"
REPUBLIC 7'-4" 40-⁄" 12-1⁄4" 2 @ 34-1⁄4" 7-1⁄4" ⁄" 1⁄4" 1⁄8" ⁄"
7'-6" 12-1⁄4" 2 @ 35-1⁄4" 7-1⁄4"
7'-8" 12-3⁄8" 3 @ 24-1⁄8" 7-1⁄4"
7'-10" 12-1⁄8" 3 @ 24-7⁄8" 7-1⁄4"
8'-0" 12-1⁄4" 3 @ 25-1⁄2" 7-1⁄4"
6'-8" 12-1⁄2" 2 @ 30"
6'-10" 12-1⁄2" 2 @ 31"
7'-0" 12-1⁄2" 2 @ 32"
SECURITY 7'-2" 12-1⁄2" 2 @ 33"
METAL 7'-4" 40-⁄" 12-1⁄2" 2 @ 34" 7-1⁄2" 3⁄8" 1⁄4" ⁄" 1⁄8"
PRODUCTS 7'-6" 10-1⁄2" 2 @ 36"
7'-8" 12-1⁄2" 3 @ 24"
7'-10" 12-1⁄2" 3 @ 24-⁄"
8'-0" 12-1⁄2" 3 @ 25-1⁄6"
6'-8" 2 @ 29-⁄"
6'-10" 2 @ 30-⁄"
7'-0" 2 @ 31-⁄"
7'-2" 2 @ 32-⁄"
STEELCRAFT 7'-4" 40-⁄" 10-3⁄8" 2 @ 33-⁄" 9-3⁄4" ⁄" 1⁄4" 1⁄8" ⁄"
7'-6" 2 @ 34-⁄"
7'-8" 3 @ 23-1⁄6"
7'-10" 3 @ 24-5⁄8"
8'-0" 3 @ 25-⁄"
Note: Dimensions listed are valid at time of publication. However, manufacturers do periodically revise their hinge and strike
spacing, therefore, the SDI strongly recommends that individual manufacturers be contacted to verify dimensions.
6
MEMBERS OF THE
AVAILABLE PUBLICATIONS STEEL DOOR INSTITUTE
CURRIES COMPANY
Test Procedures P.O. Box 1648
Mason City, IA 50402-1648
ANSI/SDI A250.3 Test Procedure & Acceptance Criteria for Factory Applied Finish (641) 423-1334
Painted Steel Surfaces for Steel Doors & Frames Fax (641) 423-9104
ANSI/SDI A250.4 Test Procedure & Acceptance Criteria for Physical Endurance for
DEANSTEEL MANUFACTURING CO.
Steel Doors, Frames, Frame Anchors & Hardware Reinforcings 111 Merchant Street
San Antonio, TX 78204-1496
ANSI/SDI A250.10 Test Procedure & Acceptance Criteria for Prime Painted Steel (210) 226-8271
Surfaces for Steel Doors & Frames Fax (210) 226-0913
ANSI/SDI A250.13 Testing and Rating of Severe Windstorm Resistant Components
THE KEWANEE CORPORATION
for Swinging Door Assemblies 1642 Burlington Avenue
Kewanee, IL 61443
SDI-113 Standard Practice for Determining the Steady State Thermal (309) 853-4481
Transmittance of Steel Door & Frame Assemblies Fax (309) 853-5466
STEEL
STEEL DOOR INSTITUTE
DOOR
INSTITUTE
30200 DETROIT ROAD • CLEVELAND, OHIO 44145
440/899-0010 • FAX 440/892-1404
9/20/2004 www.steeldoor.org