Intended Use Count L3 is intended for lysing of cells for WBC Count, WBC differentials and • Connect Count L3 to Mispa count through the Yellow colour tagged tube Hemoglobin measurement in Mispa Count -3 part Differential Hematology kept inside the instrument. Analyzer. • Click Reagent icon in the main screen. Reagent Composition • Click Cleaner icon and scan two rows of barcode in the label. And ensure for Quaternary ammonium salts - < 50 g/L Beep sound after scanning each row of barcode. Non-ionic surfactant - < 15 g/L • Click icon in the screen. 2-Propanol - 0.1 - 1.5mL/L • If barcode is accepted showing Question “Save changes”? ok or cancel. Risk & Safety • If barcode is not accepted or repeatation of same barcode, a warning message Material Safety data sheets (MSDS) will be provided on request “Edition is inconsistent, reagent lot number is already used” will be displayed. Reagent Storage and Stability • Check and ensure that the reagent barcode is smudge free. The sealed reagents are stable up to the expiry date stated on the label, when • Retry scanning barcode and if not succeeded contact customer support. 0 0 stored at 15 C to 30 C. Precautions and Warnings Open Vial Stability Once opened, the reagent is stable up to 90 days, if contamination is avoided. 1. To avoid contamination, close the reagent can properly. Avoid direct exposure of reagent to light. Reagent Deterioration Turbidity or precipitation in the reagent indicates deterioration and the reagent 2. Ensure the system is installed and performing in a clean dust free environment must be discarded. Sample should be retested using fresh reagent. 3. For in vitro diagnostic use only.
Direction for Use 4. Do not pipette by mouth.
Fol low the procedures given in the operation manual of Mispa Count 3 part 5. Do not inhale the reagent. differential Hematology Analyzer. 6. If the reagent comes in contact with eye or skin, wash off immediately with Note: large amount of water, and seek medical attention immediately. 1. Make sure the tubing’s are clean and dust free before putting into the reagent. 7. Do not use the reagent in any procedures other than those described herein. Ensure that the tubing’s cap is tighten properly with reagent bottle. 8. Do not use containers and other materials in the package for any purpose other 2. Connect the count L3 bottle to the Yellow color tagged tube in the inside the than those described here in. left hand side flap of Mispa count instrument. 9. When discarding the reagent dispose them off according to local regulations. 3. While changing the reagent, clean the tubing’s thoroughly. 10. Take all precautions required for hand ling all laboratory reagents while using the reagent.
(Oxford Studies in Digital Politics) Jack Parkin - Money Code Space - Hidden Power in Bitcoin, Blockchain, and Decentralisation-Oxford University Press (2020)