This document provides important safety instructions for a UPS system. It states that the UPS is only intended for indoor use in temperature controlled environments, and is not suitable for use in computer rooms. It also provides cautions about connecting the UPS to a grounded outlet, not overloading circuits, and ensuring proper ventilation. Qualified service personnel should perform all installation, servicing and repairs to avoid risk of electrical shock or injury.
This document provides important safety instructions for a UPS system. It states that the UPS is only intended for indoor use in temperature controlled environments, and is not suitable for use in computer rooms. It also provides cautions about connecting the UPS to a grounded outlet, not overloading circuits, and ensuring proper ventilation. Qualified service personnel should perform all installation, servicing and repairs to avoid risk of electrical shock or injury.
This document provides important safety instructions for a UPS system. It states that the UPS is only intended for indoor use in temperature controlled environments, and is not suitable for use in computer rooms. It also provides cautions about connecting the UPS to a grounded outlet, not overloading circuits, and ensuring proper ventilation. Qualified service personnel should perform all installation, servicing and repairs to avoid risk of electrical shock or injury.
temperature controlled environment that is free of co This UPS series is not intended for use in a compute Thank you for purchasing this power protection product. It has been designed and manufactured to provide many years of trouble free service. Please read Standard for the Protection of Electronic Computer/ this manual before installing your Endeavor LCD UPS, models ED1000RTXL2U, ment ANSI/NFPA 75. ED1500RTXL2U, ED2000RTXL2U, ED3000RTXL2U as it provides important CAUTION! Connect the UPS to a two pole, three information that should be followed during the installation and the maintenance outlet. The receptacle must be connected to the app of the UPS system allowing you to correctly set up your system for the maxi- tion (circuit breaker or fuse). Connection to any othe mum safety and performance. Included is information on customer support result in a shock hazard and violate local electrical and factory service, if it is required. If you experience a problem with the UPS UPS into extension cords, adapter plugs or surge stri system please refer to the Troubleshooting guide in this manual to correct the problem or collect enough information so that the Technical Support Depart- CAUTION! To reduce the risk of fire, connect o ment can assist you. circuit provided with 20 / 30 amperes maximum bra protection in accordance with the National Electric C
IMPORTANT SAFETY INSTRUCTIONS CAUTION! To reduce the risk of electrical shock w
SAVE THESE INSTRUCTIONS ! UPS equipment and the connected equipment, the u CONSIGNES DE SÉCURITÉ IMPORTANTES combined sum of the AC leakage current does not ex SAUVEGARDEZ CES CONSIGNES! CAUTION! To reduce the risk of electrical shock load equipment grounding cannot be verified, disco Veuillez lire ce manuel avant l'installation de l'onduleur modèles ED1000RTXL2U, AC wall outlet before installing a computer interface ED1500RTXL2U, ED2000RTXL2U, ED3000RTXL2U). Il contient de l'information power cord only after all signaling connections are m importante qui doit être respectée au cours de l'installation et de l'entretien de WARNING: This Uninterruptible Power Supply con l'onduleur et des batteries. Cette information vous permettra de correctement ous voltages. Do not attempt to disassemble the U installer le système pour atteindre son rendement maximum en toute sécurité. replacement procedure. This UPS contains no user pairs and Battery replacement must be performed by CAUTION! The maximum ambient operating temperature for this UPS series PERSONNEL ONLY. is 40°C (“0 ~ 40°C” for Ambient Operation). The external vents and openings on the UPS are provided for ventilation. WARNING: Qualified Service Personnel ONLY m To ensure reliable operation of the UPS and to protect the UPS from over- tion and Servicing of these UPS systems. MINUTEM heating, these vents and openings must not be blocked or covered. Do not and is not limited to: injury to the Service Personnel, o insert any object into any of the vents or openings that may hinder the ve- or the connected equipment caused by the incorrect ntilation. of the UPS system. Install the UPS system in a well ventilated area, away from excess moistu- re, heat, dust, flammable gas or explosives. WARNING: Risk of Electrical Shock. Hazardous Leave adequate space (at least 20cm) in the front and at the rear of the power supplies are energized from the battery eve UPS system for proper ventilation. disconnected. Do not mount the UPS system with its front or rear panel facing down at any angle. CAUTION! DO NOT USE THE MOUNTING BRA Before usage, you must allow the UPS system to adjust to room temper- UPS. The mounting brackets are ONLY for securing ature (20°C~25°C or 68°F~77°F) for at least one hour to avoid moisture condensing inside the UPS. NOTE: These UPSs are shipped with the batteries di ies must be connected before putting these UPSs int tion 3 "Installation" for connecting the batteries. 2