Professional Documents
Culture Documents
Release Notes
Mai 30/07
Releases Notes PACAT V2.8.A - Release Notes Mai 30/07 - Page 2 / 20
Table of contents
1. Introduction Page 3
1. Introduction :
This document represents the evolutions, corrections, and limitations of 2.8.A version.
2. AirN@v Product
Release Notes AWN
3. Previous versions
1. Modification list for version 2.8
Description Layout for Dynamic Wiring Menu and Dynamic Wiring toolbar is the same than A380_Maintenance.
Description The label used to access to the ADPM index is now "Deac. Tasks List (print)". The second column is now
"MMEL/CDL Ref".
Description Now, when you print a page, you can display Effect with his FSN or MSN value.
Description The probleme with caracters " is corrected for the help consultation on AOLS.
Description The index result when calling the "shopping basket" icon is reorganized as follow:
- the first column "type" is replaced by one named "CSN" containing the full CSN of each part
- a sort is made on this first column,
- effectivity column is suppressed,
- in next to last position a "QTY" column is added, containing UPA tag.
- in last position a "TypeCol" column is added, containing "part".
Description SUB and SUPER tags are displayed as suffix and exponents.
Description Now, it is possible to find information relative to a FIN from PIPC PW via the index "AIPC - Search Item by FIN".
Description Modification AMM and TSM for make accessible elements TASK and PGBLK DELETED in the TOC.And make
accessible element TASK DELETED in index "AMM Task/Subtask by ATA..." and "TSM Fault Isolation Task..."
Description Modification of the download files of General PN Data List in order to have all projects homogeneous.
Description In a form or a result window, the choice for the "Revision Status" field is changed by "Revised", "New", "Deleted"
or "Unchanged". And the choice for the "Rev Code" field is changed by "N", "D" or "U".
Description Modification of the form's title, result window's title and Length column in result window.
Short description if a DTD is placed with the SGML DATA, the production uses this DTD rather than the PACAT DTD
Identification type: evolution ref: PSALR.1901 ext. ref.: FI AIB-2007-137110
Description if a DTD is placed with the SGML DATA, the production uses this DTD rather than the PACAT DTD
Description Modification for Collapse: the "Job Set-Up Information" paragraphe can be Collapse and "Reason for the Job"
and "Possible Causes" paragraphes can not be Collapse
Description For AMM and TSM,in the Highlight table, the sentence "INCLUDE REVISED SUBTASK" added in the column
"Reason for change" for elemnts TASK unchanged
Description Change for Ref. MPD. Deletion of "EN" and ";" in Ref MPD
Description A new search function, like the Cargo Loading System, is now aivalable to enable direct search for TASK with
FUNC 040 and deac/reac index (tag DRINDEX). * access : add in AMM menu, after "CLS" for A380, and after
"Deac/Reac Task by MMEL/CDL" for SA/LR, a new entry named "ADPM". * form: no form, as there is no data to
select from the user, * result :ATA code (check consistency of naming), revision status, task title, MMEL/CDL ref
(in one single column format MMEL - item number), effect.
Description All item related to identifier access shall be removed, starting with AWN V2.4 version, that is to say, button in icon
bar and index access in "other event" menu.
Description References to MMEL, CDL and MPD are now available in AMM Highlight Table.
Description This index allows now to search "TO" FIN and not only "FROM" FIN
Description In case of a RPLBY INC=2 or 2OLD has already an opposite RPLBY in the PNRDATA, it is no longer inserted in
the PNRDATA.
Description Now there is no more error in the conversion because of INTW or RPLS tags.
Description ESPM will be treated with the same tools (index, attributex, etc) in all projects.
Description The engine code is only displayed into brackets for AMM and TSM in the Table of content and the view. (and no
longer for the other documents).
Description The shopping basket function is now accessible on PIPC in the same way existing function on A/C IPC.
Description Now, it is possible to find information relative to a part number of the document PIPC thanks to the Numerical
Index.
Description Common environment file: new organisation of the file. The variables to be updated by the customer has to be
put at the top of the file. The env_COMMON_AIL.ksh file is to be sourced when AIL data are processed.
Description The name of help documentation changes : "MIL Document Reference.pdf" becomes "MIL_NameOfProject.pdf",
"MUL Document Reference.pdf" becomes "MUL_NameOfProject.pdf", "Releases Notes Document
Reference.pdf" becomes "Releases_Notes_NameOfProject.pdf".
Description Now, in the introduction of ASM/AWM, the title of sheet that appears in AWNFIG window is the same that the one
that appears in VIEW.
Description ETOPS information is now displayed in the "Qualified Spares" part of the PN Window.
Description Modify of the Unit element Title: if Unit's figure is DELETED then Title is first element descendant TITLE.
Description Modification of XSL: links between PSPMFR and PNR work now.
Description Add a ADEFF element which includes EFFECT, TITLE and DPLIST in order to have no effectivity on PNRFILE.
Description Modification of the PIPC path value in the model bookshefl in order to set the right environnement value :
$SGML_PIPC_PW.
Description Modification of the TRLTR's AWNID in the Model for AMM and TSM
Description The file create by IPC_updateEfftext was not saved in the AIPC_conversion.ksh. We fixed the problem (we save
it)
Description The new type "RAW Material" is now accessible in the numerical index search
Description Labels name in search form and search results window are now standard ones For Example: "ATA Ref" replace
"ATA Code", "Ata Code" or "AMTOSS Code"; "Configuration Code" replace "confltr"; "Method" replace "Var"; Pin
replace "PIN"
Description The list of indexes (and its keys) used for searches in the Catalog modele, is given in the file in delivery directory
DOC.
Description Increase the space between first line of LxITEM or PRCITEM or UNLITEM (which is preceded by numbering),
and the second paragraph of the element.
Description When tables are small, their titles are now left justified rather than centered.
Description The sheet number displayed is the sheet number of the sheet in the SGML data, rather than a sequential number
Description When there are several GRPHCREF tag (having EFFECT tag ) in CALS table a specific row is created for each
GRPHCREF with empty entry depending on where is the initial GRPHCREF
Description all indexes result windows in AMM, TSM and IPC include the "send to print basket" button.
Description In IPC, Titles of UNIT (ending by 0X or X0) are now built from the Intro table description and subj. entries
Description The result windows of "AMM TASK by ATA" now include the ability for multi-selection and the button to add
result(s) to print basket
Description The description of "Search by SB and COC" is now accessible from button Help in the form of this search or in
the "Help and searches "
Description The TOC of the Introduction tag (in ASM, AWL, AWM, ESPM, IPC) is similar to the introduction TOC of AMM
Description AMM and TSM external references, (in TSM <REFEXT REFMAN="AMM" REFLOC="ENXXXXX") can generate
several targets, not only one as it was before
Description You can use new following values in the word search : CB, AD, EO, ND, DE, CF, BF, DK, PD, PE, PF, PG, QD,
QE, QF, QG, RD, RE, RF, RH, SF, SG, ST, SJ, SW, TG, TJ, TT, TK, UG, UK, UE, ED, YE, YD, YN, YR, YP, YF,
YZ, YS, YX, HA, HB, HC,DK, DM, PN, QL, RK, GJ, MH, UU, MJ, VR, VJ, VV, MJ, RA, PA, AC, O2, TR, AA, A/C,
A/G, ACP, ACR, ADF, AFM, AFT, AGU, AH, AOL, AOT, APU, ATA, ATT, BAT, BCL, CMR, CN, CRR, CSU,
CVR, CY, DC, DI, DS, DY, EC, EDP, ELT, FAA, FC,FH, FWD, GCU, GLC, GSE, GRP, GVI, HDG, HR, IDG, ISB,
LD, LDF, LDL, LH, LU, LWR, MH, MO, MOD, MPD, MRB, MSG, MSI, MSN, AC, AF, AI, BK, BL, CW,DC, DG, DI,
DN, DP,FC, FD, FO, GA, GS, HF, HI, HP, LH, LO, LP, LS, LT IC, IP, NC, ND, NF, PA, PB, PH, PR, RF, RH, SB,
SD, SP, ST SW, TB, TD, TK, TO, VS, WT
Description The Manual Front Matter of each document presents the TR List on either tag TRLIST , or tag TRLTR for
AMM/TSM
Description The new manual PIPC_PW is added in the Parameterization Catalog. Two models are delivered: one with
PIPC_PW and one without without PIPC_PW.
Description The vendor code in index form, result window or main view should be displayed without being preceded by a "V"
Description A new link is implemented from COC number (in COC list) to the tag containning a COCEFF tag that has the
same value than this COC number
Description The links from tag CSN (external links from AMM to IPC) now take also into account the PIPC PW.
Rule for PIPC: link only from engine chapter (70 to 80) with CONFLTR="T"
Description the "Job Set Up Information" and the" Reason for the Job" are now collapsible in AMM, as it was done in TSM
Description If the number of FIN exceeds the EXCEL capacity, the files generated in IPC download functionnality, will be split
using UsgCat value
Description When an highlighted tag has several CHGDESC, one CHGDESC will be displayed with back line
Description The description of link between 2 databases has been added on the "Layout, link and searches"
Description In JobCard Search : TSM Task By ATA/word, the button "add to Job Card Package" has been added in its result
window.
Description The new IPC DTD has been integrated, both ATA and AIL DTD REFERENCE:"-//ATA-TEXT//DTD
AIPC-VER1-LEVEL2//EN" Revision Date: 2006/10/01 The main change is the integration of TRLIST
Description The indexes tables are now accessible in TOC just after introduction, in Manual front matter part
Description Chapters are now repeatable, each of them will be numbered 20, but with a vendor letter code. KEY will be like
SP20X, X letter code. Rule for display both in TOC and in main view page is:
KEY="SP20", add "(Airbus)" after title, KEY="SP20x", add "(vendor code)" after title, correspondence table from
letter to vendor code . In case of unknown letter code, then vendor code value will be "misc".
Description A highlight table has to be provided. It will consider : the standard ATA revision marks on Chapter, Section,
Subject. It will be splitted by chapter only
Description A new ESPM menu shall be available containing 3 items: - ESPM home page, same behavior than all other
"manual" home pages, - Item by P/N - Topic by ATA/ word
Description A new search function "Item by PN" has been added in ESPM menu
Description A new search function "topic by ATA..." has been added in ESPM menu
Short description Numerical Index : remove fields Type and Total Qty
Identification type: evolution ref: 1689
Description In the form for numerical index, TYPE field and TOTAL QTY field have been removed. these 2 informations are
displayed in the result windows.
Description A new DTD ESPM has been taken into account : Main change: Chapter is becoming repeatable
Description The titles in ATA breakdown and TOC behavior shall be changed as follow:
Main view:
Title of Subject will be added, same presentation than in AMM (centered, underlined, bold and same character
font than in AMM) Title of LIST1 shall be displayed as title on Pageblock in AMM, except that there is no ATA
numbering (current content is correct),
TOC:
When clicking anyway in the TOC (upper level than LIST1), in current parameterisation, the focus goes on LIST1
Title. The requested change is that focus goes on SUBJECT title when upper than LIST1, then the main view
shall display titles accordingly to above requirements.
Description The new label PW60 has been taken into account to display the title of chapter for engine PW600
Description The Link "See IPC" from AMM to IPC is only activated for PGBLK =04.
Description The vertical span of table cells is now correctly displayed in Equipment list.
Description The printing of TOC node as "Manuel Front Matter" printed only its first child node , not all the content "Manuel
Front Matter". This problem is now corrected.
Description date format in Search by SB and COC was bad. It's now correctly displayed
Description The numbering after Z (i.e AA, AB AC) is now correctly displayed .
Description A value is now displayed in the column "REF MPD" in the result window of th search AMM Task By ATA/Word.
Description The Type "APN" (AIRLINES PN) is now taken into account in search "Numerical Index"
Description The new title of illustrations is : "Figure" CH-SE-SU-FUNC-SEQ-CONFLTR / SHEET+ sheetnbr/numberof all
sheets + TITLE if the sheet has an attribute FUNC and else "Figure" CH-SE-SU-PGBLK/ SHEET+
sheetnbr/number of all sheets + TITLE if the sheet has not an attribute FUNC
Description Links from IPC (in Part number windows) to ENGENEERING DRAWING has been corrected.
Description In IPC, in the interoperability display of PN window, it is not stopped if INC=2OLD. At the opposite, the stop
always exist for INC=152OLD, 342OLD, 352OLD.
Description During the research by index « Numerical Index », the title of the window DPL display now the graphic window
title and not only CH-SEC.
Description The fields "Faultcode" and "confltr" are not in "case sensitive".
Description Placing of a Job Card Module in IPC with the option "Add to job card package". The targets are the figures. With
the link "package content", the figures added in the package are displayed.
Description with the search by SB and COC , for you can access to the SB List or to the elements referenced by a SB or
COC
Description The tables of affectivity of each document are merged in order to obtain a unique table.
Description Creation of the index "AMM - Task by CDL/MMEL Ref./Word". The targets are the TASK.
Description The Highlights table of AMM displays only the changes on elements TASK and GRAPHIC. Theirs information
MPD are displayed if they exist:
• Reference
• Ref. MPD
• Reason for change
• Change Code
Description In the index ITEM by FIN in IPC, the result window is organised in increasing order.
Description Under IPC menu, there are a new link to documents for download
Description In the generation of highlights table, the figures, which are the following attributes, are listed:
• figure having CHG!=U
• figure having CHG==U et ITEM!=U
• figure having CHG!=U et ITEM!=U
Description Deleting of the column "Effectivity" for the index "IPC Numerical Index", "Pn information" and "Vendor List"
Description Enabling hyperlinks within Job Set up Information for expendable parts and consumable materials
Description Add new menu: System - Quit and Open Admin and Attachments - Attach floating AD.
Description The access to the Trouble shooting is deleted on the Advanced Functions. It's accessible in the edition window of
manual TSM.
Description Display the sheet's title: "Figure" + CH-SE-SU-FUNC-SEQ-CONFLTR / "SHEET" + SHEETNBR/number of sheet
- TITLE
Description The result window display 12 columns: From; Connector/Module;Pin; Wire Number; Color; Type; Gauge; Length;
To; Connector/Module; Effectivity
Description under system menu you can acces to the item Print Bascket Content
Description When a title has more 80 characters, the latter is truncated and the symbol "..." is added.
Description The expression "revdate" in an impression take the revision date of the manual and into account and not the
revision date of the base.
Description In the index "PN Information", the elements PNRDATA which are #No procurable# are not taken into account.
Description The links to document from elements AFP, RPLBY, APN, BNP, BWP, OPN, OPT, OSC, PNR, PSP, RPNR don#t
target the elements PNRDATA which are "No procurable".