Professional Documents
Culture Documents
Total Marks: 05
Obtained Marks:
Computer Networks
Assignment # 03
Last date of Submission: 31 May, 2022
Instructions: Copied or shown assignments will be marked zero. Late submissions are not
entertained in any case. Submit on Google classroom.
CN BSSE-5B SZABIST-ISB
Shaheed Zulfikar Ali Bhutto Institute of Science & Technology
Q#1:
Discuss wireless LAN standards IEEE 802.15.4 and IEEE 802.15.6.
Ans: IEEE 802.15. 4 is proposed for Wireless Person Area Network (WPAN) that
provides low data rate, low power, and low-cost applications in a short range. 4 is a
technical standard which defines the operation of a low-rate wireless personal area
network (LR-WPAN). It specifies the physical layer and media access control for LR-
WPANs and is maintained by the IEEE 802.15 working group.
IEEE 802.15. 6 is a standard for short-range, low power, and highly reliable wireless
communication in, on and around the human body. It supports a wide range of
applications in body area networks (BANs) such as healthcare services.
Q#02:
Explain IP version six Address Format with help of diagrams
Ans: An IPv6 address is 4 times larger than IPv4, but surprisingly, the header of an IPv6
address is only 2 times larger than that of IPv4. IPv6 headers have one Fixed Header and
zero or more Optional (Extension) Headers. All the necessary information that is
essential for a router is kept in the Fixed Header. The Extension Header contains
optional information that helps routers to understand how to handle a packet/flow.
Q#03:
Discuss the Mobile IP Networking and functionality.
CN BSSE-5B SZABIST-ISB
Shaheed Zulfikar Ali Bhutto Institute of Science & Technology
An IP address serves two principal functions: it identifies the host, or more specifically
its network interface, and it provides the location of the host in the network, and thus the
capability of establishing a path to that host.
Q#04:
Consider the time to travel of data packets from router P to I is 2000 µsec, router I
to router L is 4 msec, router I to router F is 4 msec, router L to F is 2.5 msec,
router L to router M is 3 msec, router F to router M is 2 msec. router M to router
K is15 msec, router M to router Q to is 16 msec, router Q to router K is 12 msec,
router P to router Q is 14 msec respectively.
a) Draw the complete routing table for all nodes using Dijkstra algorithm. Show all
the steps of your procedure?
b) Find the shortest path between router I and router K.
CN BSSE-5B SZABIST-ISB
Shaheed Zulfikar Ali Bhutto Institute of Science & Technology
CN BSSE-5B SZABIST-ISB
Shaheed Zulfikar Ali Bhutto Institute of Science & Technology
Ans:
CN BSSE-5B SZABIST-ISB
Shaheed Zulfikar Ali Bhutto Institute of Science & Technology
CN BSSE-5B SZABIST-ISB
Shaheed Zulfikar Ali Bhutto Institute of Science & Technology
CN BSSE-5B SZABIST-ISB