Professional Documents
Culture Documents
1|Page
I'll begin my response to this question by expressing how excited I am to be in this class. I have
gained a lot of knowledge, and I have high hopes for my future at the University of the People.
As usual, I double-checked my grade for the previous week's discussion assignment as well as
my Learning Journal. I study my already download textbook in regards to the weeks activities. I
also watch some videos to understand the concept of every activity for the week, I always make
it a priority to write the discussion post first, after which the, Programming assignment, then, the
Self-Quiz, and if there are Graded Quiz. Finally, the Learning Journal because it has one day
My grade on last week’s Learning Journal really made me SAD, when I was awarded 0 credit for
a 94% commonality. This led to my 95.00/100.00 on the Graded Quiz.
I'm always thankful to my friends for their contributions to the Discussion Forum. Each student
in the discussion forums responds differently to the weekly discussion assignments. While some
students explain questions thoroughly, the majority of students respond professionally with brief
responses.
I realize how good I will turn in the future, considering what we are learning in both Written, and
education I'm receiving at the university will unquestionably propel me to the pinnacle of my
life.
Below are two reasons why networks might use Error-Correcting Codes instead of Error
2|Page
Error detection is the process of identifying mistakes made during transmission from the
transmitter to the receiver that were brought on by noise or other interference. Error correction is
the detection of errors and the error-free restoration of original data. There are two methods for
With backward error correction, the receiver detects an error in the received data and
Forward Error Correction occurs when the receiver detects an error in the received data,
it runs an error correction code that helps it fix and correct some types of errors
automatically.
Data transmission methods include sending data with an error correction code and error detection
Two reasons why Error Correction Code has advantages over the other is listed below
When we use a correction code, the entire channel bandwidth is used to transmit data in one
direction, which automatically increases the data transmission efficiency. However, if an error
detected, the bandwidth of the channel is cut in half, resulting in a loss of performance.
3|Page
if an error-filled frame is received, the receiver can regenerate the corrected frame using error
checking information. During error detection and retransmission, the receiver sends a request to
retransmit that specific frame, and then the sender resends that frame, which is a lengthy process.
Note: Error correction can be done in 2 ways: Once, although the error is determined such that
the transmitter is broadcasting over the entire data unit. In another case, however, the receiver
might benefit from correcting the error code while correcting positive errors automatically.
4|Page
Reference:
Hamming, R. W. (1950). "Error Detecting and Error Correcting Codes" (PDF). Bell System
Technical Journal. USA: AT&T. 29 (2): 147–160
5|Page