Professional Documents
Culture Documents
HOVA Mechanical Seals
HOVA Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
Mechanical Seals
HOVA is an independent manufacturer of mechanical seals
for a variety of models of the below brands:
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 1
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 2
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
Accessories
Heat exchangers
(& cyclon separators) 30
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 3
Your Partner for Mechanical Seals
And Solutions
Metal parts:
AISI 316
Alloy 20
Alloy C-276
Alloy 400 Monel
Basic Dimensions
Nominal d d d³ d⁴ min l³k
size inch mm mm mm mm
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 5
Your Partner for Mechanical Seals
And Solutions
Applica&on Limits
Operang Pressure: max. 70 bar (1000 psig)
Operang Temperature: 0°C to 274°C (+32° F to +525° F)
on water or water soluons
-70°C to +343°C (-100°F to +650°F)
Speed max. 22 m/sec (max. 4500 3/min)
Metal parts:
AISI 316
Alloy 20
Alloy C-276
Alloy 400 Monel
Basic Dimensions
Nominal d d d³ d⁴ min l³k
size inch mm mm mm mm
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 7
Your Partner for Mechanical Seals
And Solutions
Applica&on Limits
Operang Pressure: max. 70 bar (1000 psig)
Operang Temperature: 0°C to 66°C (+32° F to +150° F)
on water or water soluons
-40°C to +204°C ((-40°F to +400°F)
Speed: max. 22 m/sec (max. 4500 3/min)
Item Iden&fica&on
1 = Seal Drive 5 = U-Cup 9 = Face, Rotang
Standard Materials 2 = Set Screw 6 = Body, Rotang Face 10 = Pin
Rotang Faces: Staonary Faces: Secondary Seals: 3 = Follower, U-Cup 7 = Lock-Ring 11 = Face, Staonary
316 / stellite Carbon (General Service) Fluoroelastomer 4 = Spring 8 = O-Ring 12 = O-Ring
Silicon Carbide Carbon (Anmony) Perflourelastomer All other parts which are not numbered are not part of the seal
Tungsten Carbide Silicon Carbide Ethylene Propylene
Tungsten Carbide Buna-N
Neoprene
Silicone
Teflon
Teflon/Glass
Metal parts:
AISI 316
Alloy 20
Alloy C-276
Alloy 400 Monel
Basic Dimensions
Nominal d² d² d³ d⁴ min l³k (ref)
size inch mm mm mm mm
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 9
Your Partner for Mechanical Seals
And Solutions
Applica&on Limits
Operang Pressure: max. 70 bar (1000 psig)
Operang Temperature: 0°C to 66°C (+32° F to +150° F)
on water or water soluons
-73°C to +260°C ((-100°F to +500°F)
Speed: max. 22 m/sec (max. 4500 3/min)
Item Iden&fica&on
Standard Materials 1 = Seal Drive 5 = U-Cup 9 = Face, Rotang
Rotang Faces: Staonary Faces: Secondary Seals: 2 = Key, Drive 6 = Body, Rotang Face 10 = Pin, Lock
Stainless steel Carbon Fluoroelastomer 3 = Spring Holder 7 = Lock-Ring 11 = Face, Staonary
(stellited) (General Service) Perflourelastomer
4 = Spring 8 = O-Ring 12 = O-Ring, Face
Silicon Carbide Carbon (Anmony) Ethylene Propylene
Tungsten Carbide Silicon Carbide Buna-N
Tungsten Carbide Neoprene All other parts which are not numbered are not part of basic seal
Silicone
Metal parts:
AISI 316
Alloy 20
Alloy C-276
Alloy 400 Monel
Basic Dimensions
Nominal d² d² d³ d⁴ min l³k
size inch mm mm mm mm
1062 1.062
1125 * 1.125
1625 1.125 41,27 57,20 63,50 61,28
1750 1.750 44,45 57,20 66,67 63,70
1875 1.875 47,62 65,09 68,26 63,50
2062 2.062 52,40 69,85 74,62 75,40
2125 2.125 53,97 68,27 73,02 72,25
2625 * 2.625
2875 * 2.875
* obsolete
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 11
Your Partner for Mechanical Seals
And Solutions
Applica&on Limits
Operang Pressure: max. 51 bar (750 psig)
Operang Temperature: 0°C to 65°C (+32° F to +150° F)
on water or water soluons
-35°C to +230°C ((-100°F to +450°F)
Speed: max. 25 m/sec (max. 250 3/sec.)
Parts Iden&fica&on
Standard Materials 3 = Spring Holder 8 = Gasket, Rotang Face
Rotang Faces: Staonary Faces: Secondary Seals: 4 = Set Screw 9 = Face, Rotang
Carbon Silicon Carbide Fluoroelastomer 5 = Spring 10 = Face, Staonary
(General Service) Tungsten Carbide Perflourelastomer
7 = Thrust Ring / Disc 11 = O-Ring, Staonary Face
Carbon (Anmony) Buna-N
Ethylene Propylene Item 1, 2, 6 and 12 to 17 and all other parts not shown/ numbered are not part of basic seal.
Neoprene
Silicone
1 = Sha3 Sleeve; 2 = Gasket, Sleeve; 6 = Gasket, Flange; 12 = Pin;
13 = Flange; 14 = Bushing; 15 = Screw, 16 = Drive Collar; 17 = Set Screw
Metal parts:
AISI 316
Alloy 20
Alloy C-276
Alloy 400 Monel
„H-QBS“
Basic Dimensions
Nominal d² d² d³ d⁴ min l³k
size inch mm mm mm mm
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 13
Your Partner for Mechanical Seals
And Solutions
Applica&on Limits
Operang Pressure: max. 51 bar (750 psig)
Operang Temperature: 0°C to 65°C (+32° F to +150° F)
on water or water soluons
-35°C to +230°C ((-100°F to +450°F)
Speed: max. 25 m/sec (max. 250 3/sec.)
Parts Iden&fica&on
Standard Materials
1 = Spring Holder 4 = Thrust Ring / Disc 9 = Face, Staonary
Rotang Faces: Staonary Faces: Secondary Seals: 2 = Set Screws 6 = O-Ring 10 = Face, Rotang
Carbon Silicon Carbide Fluoroelastomer
3 = Springs 7 = Face, Rotang
(General Service) Tungsten Carbide Perflourelastomer
Carbon (Anmony) Ethylene Propylene All other parts not shown/ numbered are not part of basic seal.
Buna-N
Neoprene
Silicone
Metal parts:
AISI 316
Alloy 20
Alloy C-276
Alloy 400 Monel
„H-QBB“ „H-QBQ“
Basic Dimensions
Nominal d² d² d³ d⁴ min l³k
size inch mm mm mm mm
Unblanced
Mul& Spring Seal Family
„H-Q“ „H-QT“ „H-QL“
For general duty, low pressure services., all purpose.
Compact seal design to fit most API and ANSI pumps.
Suitable for dimensionally restricted stuffing boxes.
Free axial movement on the sha3 due to o-ring
mounted rotang face.
Opera&ng Parameters
Pressure: up to 10 bar (max. 150 psig)
Temperature: 0°C to 135°C (+32° F to +275° F)
on water or water soluons
-40°C to +204°C ((-40°F to +400°F)
Speed: up to 23 m/sec (max. 75 3/sec.)
Metal parts:
AISI 316
Alloy 20
Alloy C-276
Alloy 400 Monel
0875 0.875
1000 1.000 25,40 39,70 42,90 33,30
1125 1.125 28,57 42,90 46,00 34,90
1250 1.250 31,75 46,00 49,20 34,90
1375 1.375 34,92 49,20 52,40 34,90
1500 1.500 38,10 52,40 55,60 34,90
1625 1.625 41,27 58,70 63,50 42,90
1750 1.750 44,45 61,90 66,70 42,90
1875 1.875 47,62 65,10 69,80 42,90
2000 2.000 50, 80 68,30 73,00 42,90
2125 2.125 53,97 71,40 76,20 42,90
2250 2.250 57,15 76,40 79,40 42,90
2375 2.375 60,32 77,80 82,50 42,90
2500 2.500 63,50 81,00 85,70 42,90
2625 2.625 66,67 88,90 95,20 50,80
2750 2.750 68,26 92,10 98,40 50,80
2875 2.875 73,02 95,20 101,60 50,80
3000 3.000 76,20 98,40 104,80 50,80
3125 3.125 79,37 101,60 109,50 50,80
3250 3.250 82,55 104,80 112,70 50,80
3375 3.375 85,27 107,90 115,90 50,80
3500 3.500 88,99 111,10 119,10 50,80
3625 3.625 92,07 114,30 122,20 50,80
3750 3.750 95,25 117,50 125,40 50,80
3875 3.875 98,42 120,60 128,60 50,80
4000 4.000 101,60 123,80 131,80 50,80
4125 4.150 104,77 130,20 139,70 52,40
4250 4.250 107,95 142,90 142,90 52,40
4375 4.375 111,12 136,50 146,00 52,40
4500 4.500 114,30 139,70 149,20 52,40
4625 4.625 117,47 142,90 152,40 52,40
4750 4.750 120,65 146,00 155,60 52,40
4875 4.875 123,82 149,20 158,70 52,40
5000 5.000 127,00 152,40 161,90 52,40
5125 5.125 130,17 155,60 165,10 52,40
5250 5.250 133,35 165,10 174,60 57,10
5375 5.375 136,52 168,30 177,80 57,10
5500 5.500 139,70 171,40 181,00 57,10
5625 5.625 142,87 174,60 184,10 57,10
5750 5.750 146,05 177,80 187,30 57,10
5875 5.875 149,22 181,00 190,50 57,10
6000 6.000 152,40 184,10 193,70 57,10
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 17
Your Partner for Mechanical Seals
And Solutions
Gas Seal
„H-GS“
Gas seal to be used as secondary seal in tandem
arrangement.
Designed to be used also on compressors.
Applica&on Limits
Operang Pressure: max. 20 bar (300 psig), dynamic
max. 70 bar (1000 psig), stac
max. 3 bar (40 psig) on gas
Operang Temperature: 0°C to +65°C +32°F to +150°F)
on water or water soluons
0°C to +230°C ((-25°F to +450°F)
Speed: max. 23 m/sec (max. 4500 3/min.) Item Iden&fica&on
3 = Set Screw 7 = O-Ring, Rotang Face
Standard Materials 4 = Drive Sleeve 8 = Face Rotang
5 = Coil Spring 9 = Face Staonary / Seat
Rotang Faces: Staonary Faces: Secondary Seals:
AISI 316/Saphire Fluoroelastomer
6 = O-Ring 10 = O-Ring, Seat
Carbon
(General Service) Perflourelastomer
Carbon (Anmony) Buna-N Item 1, 2, 11 to 17 and all other parts not shown/ numbered are not part of basic seal.
Gas Seal
„H-GS“
Basic Dimensions
Nominal d¹ d¹ d² d³ d⁴ min
size inch mm mm mm mm
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 19
Your Partner for Mechanical Seals
And Solutions
Gas Seal
„H-GSL“
Standard Sizes
1 ½“ to 6“
(38,1 to 152,4 mm)
Applica&on Limits
Operang Pressure: max. 40 bar (600 psig)
Operang Temperature: -40°C to +204°C (-40° F to +400° F)
Speed: max. 30 m/sec (max. 6000 3/min.)
Metal parts: Item 1, 2, 12 and 14 to 21 to 17 and all other parts not numbered are not part of basic seal.
Special stainless steel 1 = Sha3 Sleeve; 2 = Sleeve Gasket;
Alloy C-276
12 = Pin; 14 = Retaining Ring, 15 = Flange Bushing; 16 = Snap Ring;
17 = Se[ng Plate; 18 = Set Screw; 19 = Drive Collar; 20 = Screw;
21 = Flange Gasket; 22 = Flange
Gas Seal
„H-GSL“
Basic Dimensions
Nominal d² d² d³ d⁴ min l³k (ref)
Size inch mm mm mm mm
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 21
Your Partner for Mechanical Seals
And Solutions
Tandem Seal
„H-GU“
Standard Sizes
1 ¼“ to 5“
(31,75 to 127 mm)
Applica&on Limits
Operang Pressure: max. 70 bar (1000 psig)
Operang Temperature: 0°C to 66°C (+32° F to +150° F)
on water or water soluons
-73°C to +350°C ((-100°F to +650°F)
Speed: max. 22 m/sec (max. 4500 3/min)
Standard Sizes
1“ to 5“
(25,4 to 127 mm)
1
Applica&on Limits
Operang Pressure: max. 27,5 bar (400 psig)
Operang Temperature: 0°C to +135°C (32° F to +275° F)
on water or water soluons
-40°C to +204°C ((-40°F to +400°F)
Speed: max. 23 m/sec (max. 4500 3/min.)
Basic Dimensions
Nominal d¹ d² d3 d⁴ min. l3k¹
size inch mm mm mm mm mm (ref only)
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 24
Your Partner for Mechanical Seals
And Solutions
High Temperature
Metal Bellow Seal
„H-BXRH“
Applica&on Limits
Operang Pressure: max. 20 bar (300 psig)
Operang Temperature: -0°C to +65°C +32°F to +150°F)
on water or water soluons
-18°C to +400°C ((0°F to +750°F)
Speed: max. 76 m/sec (max. 15000 3/min.)
Item 1, 2, 3, 6, 7 and 9 to 15 and all other parts not numbered are not part of basic seal.
Metal parts:
AISI 316 1 = Cap Screw; 2 = Sha3 Sleeve; 3 = Sleeve Gasket; 6 = Gland Gasket
Alloy 718 7 = Gland / Flange; 9 = Cap Screw; 10 = An Coke Device;
Alloy 42 11 = Bushing, Flange; 12 = Backing Ring; 13 = Snap Ring;
14 = Se[ng Plate; 15 = Cap Screw
Basic Dimensions
Nominal d² d³ d⁴ min.
size mm mm mm
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 26
Your Partner for Mechanical Seals
And Solutions
Applica&on Limits
Operang Pressure: max. 136 bar (2000 psig)
Operang Temperature: -+32°C to +200°C +32°F to +150°F)
on water or water soluons
-40°C to +200°C ((-40°F to +400°F)
Speed: max. 76 m/sec (max. 15000 3/min.) **
Basic Dimensions
Nominal d² d² d³ d⁴ min
size inch mm mm mm
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 28
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
HOVA designs and manufactures your cartridge seals from your sample or
GA drawing, to fit without any modifica&on, while your exis&ng spare parts
remain fully interchangeable.
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 29
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
Heat Exchanger
„H-HE“
HOVA foot mounted high pressure heat exchanger is
used to cool pressure/barrier fluids in seal supply circuits
Designed as a dual coil type heat exchanger.
The case can easily be removed for tube coil cleaning.
Available in 3 sizes.
Fields of Applica&on
Chemical industry
Petrochemical industry
Oil and Gas industry
Refinery
Power plants
Applica&on Limits
Max. temperature tube side: 260°C
Max, pressure at 30°C: 10,3 bar
Tube volume: 0,378/9,07/17,77 liter
Case volume: 0,87/1,5/4,3 liter
Cooling are: 0,16/0,32/0,54 m²
Materials
Tubes: Casing: Others:
AISI 304 Cast iron Flexible Con.: Brass
AISI 316 Carbon steel Flex. Con (high temp: 316
Copper Casing O-Ring: Viton
Inconel Bolts and Nuts: Alloy steel
Monel Coil Separator: 18.8
Dimensions
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 30
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
Mono-spring
H-U family (H-U, H-UC, H-UK, H-UKO) 32
H-UZ 33
H-UX 34
H-D family (H-D, H-DX, H-DZ (*P), (*Q)) 35
H-QBS 36
Mul&-spring
H-QB family (H-QB, H-QBT, H-QBS, H-QBB, 37-38
H-QBL, H-QBU, H-QBR)
H-Q family (H-Q, H-QL, H-QT) 39
Gas Seals 40-41
H-GS
H-GSL
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 31
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
Rota&ng Face for H-U, H-UK (solid) Rota&ng Face Assy for H-UC, H-UKC Sta&onary Face / Seat Seat Gasket
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 32
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
Rota&ng Face for H-UX (solid) Rota&ng Face for H-UZC (canned) Sta&onary Face / Seat Seat Gasket
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 33
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
Rota&ng Face for H-UX (solid) Sta&onary Face / Seat Seat Gasket
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 34
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 35
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 36
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
Sta&onary Face H-QB Sta&onary Face H-QBL Seat Gasket Face Gasket H-QBT
Sta&onary Face H-QBT
H-QB, H-QBL
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 37
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
Spring Holder Set Screws Springs Retaining Ring Rota&ng Face Gasket
Rota&ng Face H-QBB Rota&ng Face H-QBQ Sta&onary Face Face Gasket
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 38
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
Sta&onary Face H-Q Sta&onary Face H-QL Face Gasket Sta&onary Face H-QT Face Gasket H-QT
H-QB H-QL
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 39
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
Drive Sleeve O-Rings Drive Sleeve Set Screws Springs Rota&ng Face
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 40
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
Spring Holder Sleeve Springs Seal Drive Rota&ng Face Sta&onary Face / Seat
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 41
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
Bellow Assy Set Screws Bellow Adapter Gasket Sta&onary Face Seat Gasket
Body Gasket Rota&ng Face Assy Sta&onary Face (Bellow Assy) Seat Gasket
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 42
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
Bellow Assy Gasket for Bellow Assy Sta&onary Face / Seat Seat Gasket
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 43
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 44
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
Addi1onal Informa1on
Your Notes
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 45
Your Partner for Mechanical Seals
And Solutions
___________________________________________________________________________________________________________________________________
HOVA is a fully independent manufacturer and supplier of high quality OEM style a3ermarket parts,
not associated with any Original Equipment Manufacturer (OEM).
All parts are a direct replacement, QM tested and guaranteed. Third party inspecons are welcome.
In addion, HOVA provides a wide range of engineering, reverse engineering and technical services for your de-
mand, as well as refurbishment of major parts and overhaul of complete units.
HOVA is ISO 9001 and ISO 14001 cerfied.
Mission Statement: To provide the petrochemical, chemical and other related industries with an economical
choice of spare parts and services, delivered consistently in a mely manner, to the highest quality standards, and
with outstanding customer service.
HOVA GmbH
Bahnhofstrasse 31, 72290 Lossburg, Germany
Phone: +49-7446-9511-0
Fax: +49-7446-2082
E-mail: info@hova-gmbh.com
Website: www.hova-gmbh.com
____________________________________________________________________________________________________________________________________
HBW-IN-BRS20 rev 5 (Technical alteraons, changes, errors and typos under usual reserve) Visit us on: www-hova-gmbh.com Page 46