Professional Documents
Culture Documents
Compact Key Holder With Swivel Lock
Compact Key Holder With Swivel Lock
LY
N
O
EL
lock
C Chewey
VIEW IN BROWSER
Summary
3 or 5 keys holder with friction captured swivel lock
I have seen various swiss army style key holders, but I don't like that they
don't keep the keys in place when your screws lose tightness causing loss
of friction due to wear from daily use. The locking mechanism in this
design is to prevent keys from swinging out even with no friction on the
keys.
Design considerations:
• 6 perimeter walls
• 6 top layers
• 6 bottom layers
• 100% infill
While this design was created entirely original from Fusion 360 and some
Tinkercad minor adjustments, I did take some inspirations from features
that I like from various designs.
Inspiration Designs:
• Swivel lock
• General shell shape
KeyHolder_top.stl 332.3 KB F3
3D
updated 26. 8. 2021
KeyHolder_1mm_insert_washer.stl 38.0 KB F3
3D
updated 26. 8. 2021
KeyHolder_0.4mm_insert_washer.stl 37.9 KB F3
3D
updated 26. 8. 2021
KeyHolder_0.4mm_washer.stl 25.1 KB F3
3D
updated 26. 8. 2021
KeyHolder_1mm_washer.stl 25.1 KB F3
3D
updated 26. 8. 2021
5-KeyHolder_swivel.stl 116.1 KB F3
3D
updated 26. 8. 2021
5-KeyHolder_bottom.stl 332.8 KB F3
3D
updated 26. 8. 2021
3-KeyHolder_swivel.stl 116.3 KB F3
3D
updated 26. 8. 2021
3-KeyHolder_bottom.stl 207.8 KB F3
3D
updated 26. 8. 2021
Attribution—Noncommercial—Share Alike