p
1
aK
-4
S|
OPERATING MANUAL
CARBON DISPERSION TESTER
ADVANCE EQUIPMENTS
3&9, VASANT VAZE INDUSTRIAL COMPOUND,
BEHIND MAHINORA SHOW ROOM, KALYAN SHIL RD,
MHATRE NAGAR, MANPADA, DOMBIVLI-EAST,
THANE-#21201,
‘TAL: 491.251.2871696
‘MMosILe: +91-9820351166/9969168109
EMAIL: advanceequioments@gmall
WEBSITE: www advanceequipments.inINTRODUCTION:
1 sction Microscope --~
2, 100X, 450X lenses ~
3. Hot Plate -- 01 Qty
4, Glass Slides 01 Qty.
5. Tweazer- o1aty
PROCEDURE:
LypPlace one clean Microscope slide on a hot plate. Keep the energy
._ tegulator knob oh point 8 so that temperature is maintained between
Wy 170°C to 210°C. Place three specimen of pin head size having
approximate weight of 5 mg on slides of 20 mm apart.
2. Place the second slide on the top of first slide, press both slide with help
of tweezer applying equal pressure & keep it on hot plate for 2/3
minutes.
3, Switch “OFF” the hot plate, allow the slides to cool down & then place
them under microscope for examination.
REPORT:
The carbon black dispersion in the material under test shall be considered
to be satisfactory if the specimens show a uniform background free from
white streaks,