Professional Documents
Culture Documents
The following contents are stated on the product and the operation manual,
including usage, precautions against personal harm and property loss, and the
methods of using the product correctly and safely. After fully understanding the
following contents (identifiers and icons), read the text body and observe the
following rules.
Identifier description
Identifier Meaning
Means improper handling may lead to personal death or
Warning
severe injury.
Means improper handling may lead to personal injury or
Caution
property loss.
[Note]: 1. “Harm” means injury, burn and electric shock which need
long-term treatment but need no hospitalization
2. “Property loss” means loss of properties and materials.
Icon description
lcon Meaning
It indicates forbidding. The forbidden subject-matter is indicated in the
icon or by images or characters aside.
1
Warning
Usage Do not operate with wet hands or let water enter the wire
Warning
arning Forbid
controller. Otherwise, electric shock may occur.
2
4. NAME AND FUCTION OF INDICATORS ON THE
CONTROLLER
1 Operation mode indication
3 Follow me function
4 ON/OFF indication
1 12
① Operation mode indication: When adjust setting off time or only off
When press " MODE " button, the follow- time is set , the "OFF" is lighted. If on
ing mode can be selected in circle. Auto and off timer are both set, the"ON" and
→Cool →Dry→Heat→Fan only→Auto. "OFF"are both lighted.
For cooling only model,heat mode is ③ Follow me function:
skipped. There is a temperature sensor inside the
② Timer : wire controller, after setting temperature,
When adjust setting on time or only on it will compare the two temperatures,
time is set, the "ON" is lighted. and the space of wire controller will be
3
the same as setting temperature. It is speed.
available under cooling, heating, auto ⑥ Lock:
mode. When the " LOCK " button is pressed,
④ ON/OFF indication : the icon appear and other buttons is
When it is on, the icon display, unable, press again, the icon disappear.
otherwise it is extinguished. ⑦ Temperature display zone:
⑤ Fan speed indication : Generally it displays setting tempera-
There are four fan modes : low, middle, ture, it can be adjusted by press
high, auto. For some models, no middle temperature button ▲ and ▼. But in fan
fan then the middle fan is seen as high mode, no display here.
5. INSTALLATION METHOD
Emitter tube
5-way terminal
Wire Controller
+5V
Indoor Unit
4
When a wire controller is needed, a small 5-way terminal should be added, fix an
infrared emitter with gumwater near the receiver on the switch board. Connect its
anode and cathode to A and B,and +5V, GND, RUN to C, D, E on the switch board.
8 ON/OFF BUTTON
TURBO BUTTON 6
5
① Mode botton: When under cool, heat and auto mode,
When press this botton, the operation press this button, follow me function is
mode change as the following active. Press again, this function is
sequence: ineffective.
→AUTO → COOL→DRY→HEAT→FAN ⑥ Turbo button :
If press this button in cooling mode, the
Remark: For the cooling only model, the
fan speed will increase (available to some
heating mode is skipped.
model with powerful function). If press this
② Timer on button :
button in heatmode, electrical heater
Press this button, timer on function is
function become ineffective.
active. Then every press, the time
⑦ Reset button ( hidden ):
increase 0.5h, after 10h, 1h increase-
Use a 1mm stick to press in the little hole ,
ment after each press. If cancel this
then the current setting is canceled . The
Function, just set it to "0.0" .
wire controller enter into original state.
③ Timer off button:
⑧ ON/OFF button:
Press this button, timer off function is
When in off state, press this button, the
active.Then every press, the time
indicator is on, the wire controller enter
increase 0.5h, after 10h, 1h increase-
into on state, and send setting information
ment after each press. If cancel this
to in door Pcb. When in on state, press
function, just set it to "0.0" .
this button, the indicator is off, and send
④ Economy operation button:
instruction. If timer on or timer off has
press this button, the indoor unit
been set, it concel this setting then send
operates in economy mode, press
instruction to stop the machine.
again, exit this mode (it may be ineffec-
⑨ Fan speed button:
tive for some models)
press this button consecutively, the fan
⑤ Follow me button:
speed will circle as follow:
6
want to prevent setting from being
changed accidentally or play fully. Push
⑩ Adjust button ▲: the LOCK button again when you want to
Set indoor temperature up. If press and cancel the LOCK mode.
hold on, it will increase at 1 degree per
0.5 second. 7. USING METHOD
11 Adjust button ▼ :
AUTOMATIC OPERATION
Set indoor temperature down . if press
and hold on, it will decrease at 1degree Connect to power, indoor operation lamp
per 0.5 second. flash.
12 Vertical swing button: 1. Press "MODE" button, select " AUTO
First press, start swing function; second ";
press, stop swing. (Match to some 2. Press the button "▲" and "▼", set
model with swing function). temperature you want, generally it is
13 Direct/horizontal swing button: among 17℃~30℃;
Press the button every time, the louver 3. Press " ON/OFF" button, operation
swings 6 degrees. Press and hold for lamp is on, the air-conditioner work in
over 2 seconds, it turns into horizontal auto mode, indoor fan is auto, and can
swing mode, press it again to quit . not be changed. Auto is displayed on
14 Lock button(hidden): LCD. Press ON/OFF button again to
When you push the LOCK button, all stop.
current settings are locked in and the 4. Economy operation is valid in auto
wire controller does not accept any mode.
operation except that of the LOCK
COOL/HEAT/FAN MODE OPERA-
button. Use the lock mode when you
TION
7
1. Press "MODE" button, select "COOL" , Timer on only:
"HEAT" or "FAN ONLY" mode. 1. Press " TIME ON " button, it display
2. Press temperature adjust button to "SET" on LCD, and display " H " and
select setting temp.. "ON" , it is waiting for timer on setting.
3. Press "FAN SPEED" button to select 2. Press " timer " on button repeatedly to
high/mid/low/auto. adjust time setting.
4. Press "ON/OFF" button, indoor unit 3. If press this button and hold on, the
operation lamp on, it works in selected time will increase at 0.5h, after 10h, it
mode. Press "ON/OFF" button again, it increase at 1h.
stops to work. 4. After setting 0.5 second, the wire
Remark: When in fan mode, no tempera- controller send timer on information, it is
ture can be set. finished.
Timer off only:
DRY OPERATION 1. Press "TIME OFF " button, it display
1. Press " MODE " button, select " DRY " "SET" on LCD, and display " H " and ON,
mode. it is waiting for timer on setting.
2. Press temperature adjust button to 2. Press "TIME OFF" button repeatedly
select setting temp. to adjust time setting.
3. Press " ON/OFF " button, indoor unit 3. If press this button and hold on , the
operation lamp on, it works in dry mode. time will increase at 0.5h, after 10h, it
Press ON/OFF button again, it stops to increase at 1h.
work. 4. After setting 0.5 second, the wire
4. In dry mode, economy operation and controller send timer off information, it is
fan speed are ineffective. finished.
CHANGE TIMER
NOTE
9
Version: QS01X-002BW
202000100350
Brivis Programmable Controller
OWNER’ S MANUAL
The following contents are stated on the product and the operation manual,
including usage, precautions against personal harm and property loss, and the
methods of using the product correctly and safely. After fully understanding the
following contents (identifiers and icons), read the text and observe the
following rules.
Identifier description
Identifier Meaning
Means improper handling may lead to personal death or
Warning
severe injury.
Means improper handling may lead to personal injury or
Caution
property loss.
[Note]: 1. “Harm” means possible injury, burn and/or electric shock
Icon description
lcon Meaning
It indicates forbidden. The forbidden subject-matter is indicated by the
icon or by images or characters beside.
1
Warning
Usage Do not operate with wet hands or use water around the
Warning
arning Forbid wired controller. Otherwise, electric shock may occur.
2
4. DISPLAY NAME AND FUNCTION ON PROGRAMMABLE
CONTROLLER
Period
Time
Date
Fan
Error Temperature Timer on/off
① Mode button:
By pressing "MODE" then either "ADD"
or "REDUCE", the mode of operation ②Fan speed button: press this button
can be changed/cycled: and "ADD" or "REDUCE" to select
Cool => Heat => Off. High, Middle, Low or Auto fan speed. To
To confirm this selection, press confirm this selection, press "CONFIRM".
"CONFIRM". ③Edit button: By pressing this button, you can
setup Days of the Week, Date and Period.
5
④Date button: In the interim or normal
display mode, press the button, and ⑧Cancel button: Used to exit without saving
then enter the date, the sequence is a change/setting, or to cancel the lock.
year--month--day of the week. ⑨Query button: Press “QUERY” to select
Set the date, and press the temperature values, press "CANCEL" to
Confirm button after each entry. go back. Press “CONFIRM” to set time
Ensure the correct setting of the date, parameters, press “ADD ” or "REDUCE"
(1 - 31). Pressing "CANCEL" will return to select days from "Sunday" to "Saturday",
you to the previous parameter changes. press “CONFIRM” to save. Next select
“1”~“8” for the time section,
⑤Timer on/off button: Pressing this button, beginning from the first time section.
will turn off the programmable function. Set mode, fan speed start and stop
⑥Reset button: Pressing this button, will times,unitl all 8 time selections are
light all of the LCD segments for 2 completed. Press “CONFIRM” to
seconds to signal a reset. save, then press "CANCEL" to finish.
After resetting, the LCD will turn off ⑩Reduce button: Used to reduce
for 1 second. After this, the system settings or to move left or up to
will return to its normal display state other settings.
and you can carry out the initial setup. 11Add button: Similar to reduce
used to increase settings, or moving
⑦Lock button: Press this button to right or down to other settings.
lock and/or unlock the controller. 12Confirm button: Used to confirm
Resetting power to the unit or a selection.
restarting the unit after a power failure 13 Time button: Press this button, and
will not unlock the controller. press "ADD" or "REDUCE" to adjust the
hours value,press "CONFIRM" to then
6
adjust the minutes. Press "ADD" or SET DATE
"REDUCE" to adjust the minutes,
press "CONFIRM" to save and go back. DATE
SET TIME
CONFIRM
TIME
CONFIRM
CONFIRM
CONFIRM
CONFIRM to save and exit
7
NOTE SET FAN SPEED *Unit must be on to set fan speed
Press the "CANCEL" button
FAN
to go back to the previous step, or
the normal display screen.
ADD or REDUCE select fan speed
MODE NOTE
NOTE
8
QUERY PLAN SET PLAN
QUERY EDIT
ADD or REDUCE
select day of ADD or REDUCE select day of
the week the week
CONFIRM CONFIRM
NOTE
ADD or REDUCE
select the end
Press the "CANCEL" button hour of the first
to go back to to the previous step, period
or the normal display screen. CONFIRM
CONFIRM
CONFIRM
CONFIRM
10
If selecting "AUTO" in the fan mode in some time periods, the 'auto' fan fan speed will not be
displayed. However, the fan will operate in "AUTO" mode but the controller will display
"CURRENTLY".
11
10. TABLE OF PROTECTION STATES / FAULTS
12
End Document
September 2012