Professional Documents
Culture Documents
MANUAL
HVS-300HS
Video Production System
HVS-30OU/FP/RU
Operation Unit
Preliminary Edition
Table of Contents
1. HVS-300HS Configuration ..........................................................................................................1
1-1. HVS-300HS Basic configuration .........................................................................................1
1-1-1. Front ...........................................................................................................................1
1-1-2. Rear ............................................................................................................................1
1-2. Opening MU Upper panel ...................................................................................................2
1-3. Card Description .................................................................................................................2
1-3-1. MAIN CARD(E03459) .................................................................................................2
1-3-2. PIF CARD (E03477) ...................................................................................................4
1-3-3. ARCNET CARD (E03426) ..........................................................................................4
1-3-4. LED CARD (E03394) ..................................................................................................5
1-3-5. SDI INPUT CARD (E03460) :Option...........................................................................5
1-3-6. ANALOG INPUT (E03450) :Option .............................................................................7
1-3-7. PC INPUT CARD (E03451) :Option .........................................................................8
1-3-8. SDI OUTPUT CARD (E03452) :Option ..................................................................10
1-3-9. ANALOG OUTPUT (E03453):Option...................................................................... 11
1-3-10. PC OUTPUT CARD (E03454): Option....................................................................12
1-4. Internal setting ..................................................................................................................14
1-4-1. MAIN CD (E03459) ...................................................................................................14
1-4-2. SDI INPUT CARD (E03460) .....................................................................................15
1-4-3. ANALOG INPUT CARD (E03450).............................................................................15
1-4-4. PC INPUT CARD (E03451) ......................................................................................16
1-4-5. SDI OUTPUT CARD (E03452) .................................................................................16
1-4-6. ANALOG OUTPUT CARD (E03453).........................................................................17
1-4-7. PC OUTPUT CARD (E03454) ..................................................................................17
1-5. Maintenance parts and Component ..................................................................................18
1-5-1. List for Maintenance Parts and Component ..............................................................18
2. HVS-30OU Configuration..........................................................................................................19
2-1. Removing OU Panel .........................................................................................................19
2-2. Board Explanation.............................................................................................................21
2-2-1. OU_CPU CARD (E03429) ........................................................................................21
2-3. Internal setting ..................................................................................................................22
2-3-1. OU_CPU CARD (E03429) ........................................................................................22
2-4. Maintenance parts and component...................................................................................23
2-4-1. List for maintenance parts and component ...............................................................23
2-5. Parts replacement.............................................................................................................23
2-5-1. HVS-30OU Fader Lever............................................................................................23
3. Total Flow..................................................................................................................................26
3-1. Block Diagram ..................................................................................................................26
3-2. Wiring................................................................................................................................27
3-2-1. HVS-300HS ..............................................................................................................27
3-2-2. HVS-30OU ................................................................................................................27
3-2-3. HVS-30RU ............................................................................................................... 28
1. HVS-300HS Configuration
1-1. HVS-300HS Basic configuration
HVS-300HS (MU) Basic configuration is as follows;
1-1-1. Front
Item Name
1 LED CARD * Front panel should be removed.
2 PIF CARD * Upper panel and MAIN Card should be removed.
A Power unit (Standard)
1-1-2. Rear
1
1-2. Opening MU Upper panel
(1) Turn off HVS-300HS and remove power cable
(2) Remove HVS-300HS upper panel screws (7 pcs from Upper pane l and 3 pcs from Side
panel)and open it.
DS1
TP18,19,20,34
D35~38
TP16 TP17,21,22,24
TP6,7
D41,42 DS2
DS5
D55,56 D66
TP15,23,25
F1
D65
DS4 DS3
2
Explanation of each location
Name Explanation
TP6 +3.3V Power Supply terminal voltage test pin
TP7 +1.8V Power Supply terminal voltage test pin
TP15 +5.1V Power Supply terminal voltage test pin
TP16 +1.2V Power Supply terminal voltage test pin
TP17 +3.3V Power Supply terminal voltage test pin
TP18 +3.3V Power Supply terminal voltage test pin
TP19 +2.5V Power Supply terminal voltage test pin
TP20 +1.8V Power Supply terminal voltage test pin
TP21 +1.5V Power Supply terminal voltage test pin
TP22 +1.0V Power Supply terminal voltage test pin
TP23 +1.0V Power Supply terminal voltage test pin
TP24 +0.75V Power Supply terminal voltage test pin
TP25 +0.75V Power Supply terminal voltage test pin
TP34 +3.3V Power Supply terminal voltage test pin
F1 +5.1V fuse (Max currency:10A)
VR1 Internal frequency adjustment
VR2 REF_OUT GAIN Adjustment
VR3 REF_OUT Pedestal level adjustment
LED Indication
Name Indication Normal condition Problem
D35 Turn on Turn off
D36 One second timer Brink at one Turn off
second frequency
D37 Brink Turn off
D38 Brink Turn off
D41 Completion of MAIN card FPGA Turn on when Turn off
configuration starting
D42 Turn on when Turn off
starting
D44 Detection of Reference input signal Turn on Turn off
D45 Lock status display Turn on Turn off
D46 GENLOCK mode or free run mode Turn on Turn off
D47 CH1,2 Input detection Turns on when
Input detection
D48 CH3,4 Input detection Turns on when -
Input detection
D49 SDI FPGA Status 1 Turn off Turn on
D50 SDI FPGA Status Turn off Turn on
D65 Indication for +0.75V Turn off Turn on
D66 Indication for +0.75V Turn off Turn on
D67 GENLOCK FPGA CONFIG Status Turn off Turn on
Note: Indication shows “Problem” during a few seconds after power on. It is due to CONFIG
process and no problem if change to normal condition after then.
3
1-3-2. PIF CARD (E03477)
TP4 TP3
TP1 TP2
4
1-3-4. LED CARD (E03394)
TP10 TP5
TP11 TP1 LED7∼LED2 TP13 TP7 LED1 TP6
TP15
TP2
TP4
5
Explanation of each location
Name Explanation
S1 Dip switch for setting up
TP1 Test pin for de-bugging (Yet apply)
TP2 Test pin for de-bugging (Yet apply)
TP3 +3.3V (SDI) Power Supply terminal voltage test pin
TP4 +3.3V Power Supply terminal voltage test pin
TP5 +2.5V Power Supply terminal voltage test pin
TP6 +1.8V Power Supply terminal voltage test pin
TP7 +1.5V Power Supply terminal voltage test pin
TP8 +1.0V Power Supply terminal voltage test pin
TP10 +0.75V Power Supply terminal voltage test pin
TP11 GND Test pin
TP12 GND Test pin
TP14 GND Test pin
TP14 GND Test pin
TP15 GND Test pin
TP16 GND Test pin
F1 +5V Fuse (Max currency:10A)
LED Indication
LED Color Indication Normal condition Problem
LED1 Red +0.75VPower status Turn off Turn on
LED2 Green CH1, 2 Input detection Turns on when input -
detection
LED3 Red FPGA Status 1 Turn off Turn on
LED4 Green CH3, 4 Input detection Turns on when input -
detection
LED5 Red FPGA Status 2 Turn off Turn on
LED6 Green Communication with MAIN Blinking depending -
Card on data
LED7 Red Yet to use Turn off -
6
1-3-6. ANALOG INPUT (E03450) :Option
TP22
VR1
VR2
VR3 TP21
TP20
LED Indication
LED Color Indication Normal condition Problem
LED1 Green CH1 status1 Depending on the situation -
LED2 Red CH1 status 2 Depending on the situation -
LED3 Green CH1 status 3 Depending on the situation -
LED4 Red CH1 status 4 Depending on the situation -
LED5 Green CH2 status 1 Depending on the situation -
LED6 Red CH2 status 2 Depending on the situation -
LED7 Red +0.75V Power status Turns off Turns on
TP14
F2 S2 TP19 LED1∼LED6 TP20 TP11 TP22
TP12
TP13
F3
TP2
TP16
TP17
8
Explanation of each location
Name Explanation
S1 Dip switch for setting up
S2 PROM Data writing dip switch
TP1 +1.8V (Analog) Power Supply terminal voltage test pin
TP2 +1.8V (Analog PLL) Power Supply terminal voltage test pin
TP11 +3.3V Power Supply terminal voltage test pin
TP12 +3.3V Power Supply terminal voltage test pin
TP13 +2.5V Power Supply terminal voltage test pin
TP14 +1.8V Power Supply terminal voltage test pin
TP15 +1.5V Power Supply terminal voltage test pin
TP16 +1.0V Power Supply terminal voltage test pin
TP17 +0.75V Power Supply terminal voltage test pin
TP18 GND test pin
TP19 GND test pin
TP20 GND test pin
TP21 GND test pin
TP22 GND test pin
TP23 GND test pin
F1 +5V Fuse (Max currency :10A)
F2 DVI Connector DDC +5V Fuse (Max currency:0.5A)
F3 VGA Connector DDC +5V Fuse (Max currency:0.5A)
LED Indication
LED Color Indication Normal condition Problem
LED1 Green Field pulse Brinks -
LED2 Red Re-set Turns on during -
resetting
LED3 Green DVI-D input detection Turns on during -
detection
LED4 Red FPGA Status Turns off Turns on
LED5 Green VGA input detection Turns on during -
detection
LED6 Red PROM data writing Turns of during data -
writing
LED7 Red +0.75V Power status Turns off Turns on
9
1-3-8. SDI OUTPUT CARD (E03452) :Option
LED1~6
TP21
LED7
TP22
TP20
TP24
TP23
S1
F1
CN3
LED Indication(E03452)
Name Indication Normal condition Problem
LED1 Frame re-setting Brinks Continuously turns off
or on
LED2 Power on re-setting Turns on then off Turns on
LED3 Down converter re-setting Turns on then off Turns on
LED4 System re-setting Turns on then off Turns on
LED5 Frame rate indication for current 60Hz:On otherwise −
system off
LED6 Down converter input signal Turns off Turns on
detection
LED7 +0.75V Power indication Turns off Turns on
10
1-3-9. ANALOG OUTPUT (E03453):Option
TP9 LED1~4
VR1,VR2 TP13
VR3,VR4 TP14
VR5,VR6 S1
VR7,VR8
TP16
VR9,VR10
TP17
VR11,VR12
TP10 TP11
TP15 F1
CN3 LED7
11
LED Indication
Name Indication Standard condition Problem
LED1 For de-bugging and it depends on − −
output format
LED2 For de-bugging and it depends on − −
output format
LED3 For de-bugging and it depends on − −
output format
LED4 For de-bugging and it depends on − −
Set-up status
LED7 +0.75V Power indicator Turns off Turns on
LED1~4
TP9
S1
TP14
VR4 TP13
VR3 TP16
VR2
VR1
TP11
VR6
TP17
VR5 TP10
TP15 CN3 F1
LED7
12
LED Display
Name Indication Normal condition Problem
LED1 Field pulse Brinks −
LED2 De-bugging for DVI DDC − −
LED3 De-bugging for VGA DDC − −
LED4 De-bugging to check IP core Turns on Turns off
setting
LED7 +0.75V operation Turns off Turns on
13
1-4. Internal setting
Internal setting for maintenance and adjustment is mentioned as follows;
NOTE
Do not change settings during operation. It should change settings during power off.
Once the setting is changed, be sure to return it to its original position for further
operation.
DS2
ON No Setting
1-8 Fix to OFF
1 -------------------------------- 8
DS3
ON No Setting
1-8 Fix to OFF
1 -------------------------------- 8
DS4
ON No Setting
1-8 Fix to OFF
1 -------------------------------- 8
DS5
ON No Setting
1-8 Fix to OFF
1 -------------------------------- 8
14
1-4-2. SDI INPUT CARD (E03460)
NOTE
Do not change settings.
S1
ON
No Setting
1 Fix to On
2 Fix to On
1 -------------------------------- 8 3 Fix to OFF
Switches are shown in white.
4 Fix to OFF
5 Fix to OFF
6 Fix to OFF
7 Fix to OFF
8 Fix to OFF
S1
ON No Setting
1 Fix to On
2 Fix to On
1 -------------------------------- 8
3 Fix to OFF
Switches are shown in white.
4 Fix to OFF
5 Fix to OFF
6 Fix to OFF
7 Fix to OFF
8 Fix to OFF
JP1 1 3
15
1-4-4. PC INPUT CARD (E03451)
NOTE
Do not change settings.
S1
ON No Setting
1 Fix to On
2 Fix to On
1 -------------------------------- 8
3 Fix to OFF
Switches are shown in white.
4 Fix to OFF
5 Fix to OFF
6 Fix to OFF
7 Fix to OFF
8 OFF:for operation, ON:for data writing to PROM
S2
ON No Setting
1 OFF:for operation, ON:for data writing to PROM
2 OFF:for operation, ON:for data writing to PROM
1 -------------------------------- 8
3 OFF:for operation, ON:for data writing to PROM
4 OFF:for operation, ON:for data writing to PROM
5 OFF:for operation, ON:for data writing to PROM
6 OFF:for operation, ON:for data writing to PROM
7 OFF:for operation, ON:for data writing to PROM
8 OFF:for operation, ON:for data writing to PROM
S1
ON No Setting
1 Fix to On
2 Fix to On
1 -------------------------------- 8
3 Fix to OFF
Switches are shown in white.
4 Fix to OFF
5 Fix to OFF
6 Fix to OFF
7 Fix to OFF
8 Fix to OFF
16
1-4-6. ANALOG OUTPUT CARD (E03453)
NOTE
Do not change settings.
S1
ON No Setting
1 Fix to On
2 Fix to On
1 -------------------------------- 8 3 Fix to OFF
Switches are shown in white.
4 Fix to OFF
5 Fix to OFF
6 Fix to OFF
7 Fix to OFF
8 Fix to OFF
S1
ON No Setting
1 Fix to On
2 Fix to On
1 -------------------------------- 8
3 Fix to OFF
Switches are shown in white.
4 Fix to OFF
5 Fix to OFF
6 Fix to OFF
7 Fix to OFF
8 Fix to OFF
17
1-5. Maintenance parts and Component
1-5-1. List for Maintenance Parts and Component
Parts and component list for periodical maintenance. Note that it is the list in quite typical
conditions. The life may vary depending on the using conditions.
HVS-300HS
Criteria Parts or Description Parts name Timing for
components replacement
Upon Card MAIN CARD E03459-1 Upon problem
problem PIF CARD E03477-2 Upon problem
ARCNET CARD E03426 Upon problem
LED CD E03394 Upon problem
Periodical Cooling fun DC Fun 109R0405H3D01 4 years
replacement Power unit MU Power unit HWS150-5 HFP 3 years
Optional card
Criteria Parts or Description Parts name Timing for
components replacement
Upon HVS-30HSDI SDI input card E03460 Upon problem
problem HVS-30HSDO SDI output card E03452-1 Upon problem
HVS-30HSAI Analog input card E03450 Upon problem
HVS-30HSAI Analog output card E03453 Upon problem
HVS-30PCIN PC input card E03451-1 Upon problem
HVS-30PCO PC output card E03454-2 Upon problem
18
2. HVS-30OU Configuration
2-1. Removing OU Panel
(3) Lift the panel until it becoming vertical, hold it then. Frame and panel are connected by 3
cables such as (1)flat cable, (2)power cable and (3)USB cable
19
Panel
Frame
(4) Detach flat cable connector (CN10), Power cable connector and USB cable connector(CN8)
(5) Note that the flat cable is fragile. Refer below photo and handle it carefully.
Place detached panel on the cushion keeping upside down.
20
2-2. Board Explanation
2-2-1. OU_CPU CARD (E03429)
VR3
SW2
CN11
TP19
TP13
VR4
CN10
CN1
TP4
SW1
CN2
TP1
CN8 TP3
LED2~10 TP2
21
LED Display
Name Indication Normal condition Problem
LED2 Yet to use
LED3 Yet to use
LED4 Yet to use
LED5 Yet to use
LED6 Yet to use
LED7 Yet to use
LED8 Yet to use
LED9 Yet to use
LED10 Yet to use
LED11 USB power supply(+3.3V) Turn on Turn off
LED12 USB power (+5V) Turn on Turn off
LED13 +12V Turn on Turn off
LED14 Analog +12V Turn on Turn off
LED15 Analog -12V Turn on Turn off
LED16 Analog +5.0V Turn on Turn off
LED17 USB power (+1.5V) Turn on Turn off
TP terminal
Name Indication
TP1 +5V voltage check
TP2 +3.3V voltage check
TP3 +1.5V voltage check
TP4 +1.8V voltage check
TP13 +12V voltage check
TP19 For fader adjustment
SW2-1 is a switch for recovery purpose when failing in version up. Set to off otherwise.
22
2-4. Maintenance parts and component
2-4-1. List for maintenance parts and component
HVS-30OU
Criteria Parts or Description Parts name Timing for
components replacement
Upon Card OU_CPU_CD E03429-3 Upon problem
problem OU_SW_CD E03428-2 Upon problem
USB_CARD E03130-1 Upon problem
Periodical Fluorescent GU280X16G-7000 Upon problem
replacement display tube
Rotary REC16A25-201-C Upon problem
Encoder
Switch 15mm KP02-12ANBKP4-076P-C Upon problem
9mm 13AL-090-0000-E Upon problem
LCD display Pattern display TD-M22C-4 Upon problem
Fader lever VM-700 Upon problem
Tools
Type Requirement
Tester 1
Press Driver 1
Hex rench (13mm) 1
(1) There is a screw deep inside the fader lever. Keep the lever by hand and remove the
screw so that black handle is released.
Press driver
23
(3) Detach connector
Move cramp and release the fader lever cable from the cramp referring following chart.
Do not move the cramp cable. Then detach connector which is with fader lever.
(4) Remove 2 binding screws referring following chart and then remove fader lever. Note not
to damage the card by fader lever cable. Also note to keep anti static cable as well as
bainding screws as they will be attach again.
(5) Check the fader lever core so that ditch of minus screw is parallel with the bar of fader
lever. If not parallel, move the screws at right and left and adjust again.
(6) Insert new fader laver for replacement in the same direction of older one. A filter for dust is
attached by metal parts. Insert the bar of fader lever between the filters and use binding screws
removed at the process (4) to attch the bar temporary.
24
(7) Check and confirm the bar so that it is attached just the center of the panel slit then tighten
binding screws carefully. Try to move the lever and confirm that it is attached correctly
square position in terms of slit and panel.
(8) Conncet cables which detached in above process”(3) Detach connector” in the reverse
order
(9)Build OU panel which detached by above process (2). Hold the panel by one hand firmly
and lift the panel until it becoming vertical. Connect 3 cables (1)flat cable, (2)power cable
and (3)USB cable referring “Removing Ou panel hereabove”.
Panel
Frame
(10) Keep panel in vertical as per above picture and adjust Fader lever OFFSET and GAIN
by the control at TP terminal.
(11) Close the panel and fix it by the screws (that were removed at process (2) hereabove.
(12) Clip and fix the lever handle as there are clip
(13) Fix the handle by binding screw
(14) Turn on power and test it by seeing monitor and moving fader lever.
25
3. Total Flow
3-1. Block Diagram
26
3-2. Wiring
3-2-1. HVS-300HS
3-2-2. HVS-30OU
27
3-2-3. HVS-30RU
28
10/08/2009 Printed in Japan
FOR-A UK Limited
UNIT C71, Barwell Business Park, Leatherhead Road, Chessington Surrey, KT9 2NY, UK
Phone: +44 (0)20-8391-7979 Fax: +44 (0)20-8391-7978