Professional Documents
Culture Documents
– AMSOIL Blog
People often wonder if it’s safe to use a thicker oil or a thinner oil than what their engine manufacturer
recommends. A common question is whether it’s safe to use 10W-30 instead of 5W-30 oil, for example. While
it’s best to use what’s recommended in your owner’s manual, inadvertently using a viscosity one grade higher
or lower than what’s recommended generally poses no long-term harm.
Brad buys a new car that requires 0W-20 motor oil. He hangs around enough gearheads to have heard the
old axiom that “higher viscosity oil equals better wear protection.”
Wanting the best protection possible for his new ride, he drains the 0W-20 that came from the factory and
installs 15W-50 racing oil.
Next we have John. He’s a cost-savings enthusiast, so he buys a 1998 Toyota Corolla. It calls for 5W-30
motor oil. But he has some 10W-30 in his garage, so he uses it to change the oil. No sense wasting good oil.
https://blog.amsoil.com/what-happens-if-i-use-the-wrong-weight-viscosity-of-oil/ 1/3
6/20/22, 3:19 PM What Happens if I Use A Thicker Oil in My Engine? – AMSOIL Blog
It’s best to use the oil viscosity recommended in the owner’s manual, but using a slightly thinner or
thicker oil (lighter or heavier viscosity) generally poses no long-term harm.
Lower-viscosity oils reduce internal friction since they flow more easily than higher-viscosity oils,
improving fuel economy. With fuel-economy standards growing more strict, automakers are leaning toward
low-viscosity lubricants to help them meet the requirements.
The oil won’t form a consistent lubricating film, allowing metal-to-metal contact and wear. His engine was
designed specifically to use a lower-viscosity oil, in this case 0W-20. Its lower viscosity allows it to flow faster
and fill the tiny clearances between parts, leading to a durable, consistent lubricating film.
Not only that, but the engine will waste energy pumping the thicker oil, reducing fuel economy. Since thicker
oil doesn’t transfer heat as well as thinner oil, operating temperatures will increase, possibly leading to
accelerated chemical break down (called “oxidation“) and harmful sludge and deposits.
https://blog.amsoil.com/what-happens-if-i-use-the-wrong-weight-viscosity-of-oil/ 2/3
6/20/22, 3:19 PM What Happens if I Use A Thicker Oil in My Engine? – AMSOIL Blog
His older engine isn’t built with the same tight tolerances as Brad’s engine. Also, both oils are the same
viscosity once the engine has reached operating temperature. He knows this because the second number in
each oil’s viscosity rating (i.e. “30”) is the same. It describes the oil’s resistance to flow at 212°F (100°C), or
normal operating temperature.
Using 10W-30 instead of 5W-30, however, could make cold starts more difficult.
It’s helpful to think of the “W” as standing for “winter.” The lower the oil’s “W” viscosity, the more readily it will
flow when cold. In this case, 5W-30 will flow more easily at startup than 10W-30.
In fact, some automakers allow you to switch to a lower viscosity oil depending on weather.
https://blog.amsoil.com/what-happens-if-i-use-the-wrong-weight-viscosity-of-oil/ 3/3