Professional Documents
Culture Documents
PARAFUEL™
Comprehensive Fuel and Crude Oil
Analysis through NIR Spectroscopy
The ParaFuel™ NIR Process analyzer from LT Industries provides comprehensive inline analysis of Diesel,
Gasoline, Jet Fuel, Kerosene, Crude Oil, Blending components and Blended Fuels for a wide range of critical
properties including Octane, Distillation Points or RVP. The analyzer is also available in a benchtop version
designed to improve efficiency when testing in laboratories.
• Monitoring Fuels and Crude Oils • Gain knowledge of the whole process systems via the LTBus automation &
With the ParaFuelTM analyzer, accu- With the capability to measure 20 communication software. The Para-
rate measurement of the properties points with a single analyzer, you can Fuel™ Analyzer can communicate
of petrochemical products and crude validate quality and performance directly via standard protocols such
oils is easy. Whatever the analyti- at all stages — from crude samples as Modbus and 4-20mA.
cal need – inspection of crude oil or at the well to downstream refining.
Improve your process knowledge • Benchtop Analyzer
finished products, inline property
and control. The ParaFuelTM Benchtop System
measurements, or validating ship-
provides the same high quality
ments – the ParaFuel™ can do the
• Measuring Tools for all conditions measurements as the process
job. The optical analysis technique system.
The ParaFuel™ Process Analyzer
allows for easy integration and rapid
comes complete with probes and flow
inline measurement. Key Features
cells built to suit your measurement
needs. They are available in a variety • Designed for 24/7 operation
• In-Process Quality Measurements
of lengths, configurations and materi- • Measure up to 20 process points with
ParaFuelTM Process Systems meas- one analyzer
als depending on your measurement
ures key chemical and physical prop- • Probes and flow cells for continuous
requirements. High pressure and
erties rapidly and accurately directly processes
temperature sampling probes can
in process, to monitor changing withstand the conditions associated • Easy integration into existing DCS
process conditions in real time and to with oil production and refining. • Fully automated user interface
adjust as necessary. The simple test • Remote diagnostic capability
procedure allows for greater experi- • Seamless Integration • Remote update capability
mental repeatability — and it does Instruments are designed for direct • Enclosures for protection against
not require special operator skills. integration into existing control dust, water and environment
REAL TIME ANALYSIS Automated, nondestructive inline analysis, • Make process adjustments in real time
completed within seconds, with results sent — Reduce waste by adjusting processes
to your DCS, PLC, or LIMS: rather than discarding batches
• Control the use of high-value crudes and • Reduce energy consumption and increase
chemicals — Measure concentrations and process efficiency — Accurately determine
use only what you need concentrations and reaction progress
• Validate quality throughout the process — • Design quality into your process —
Determine where and when product falls Achieve higher standards than are
out of specification possible with batch testing alone
PARAFUEL™ MODELS
Process / Single Channel ParaFuel™ NIR Process Analyzer + one (1) High Energy Bubble Shedding Probe
Process / Multi Channel ParaFuel™ NIR Process Analyzer + Multiplexer + Up to twenty (20) Probes
Laboratory / Benchtop ParaFuel™ NIR Benchtop Analyzer + one (1) Dip Probe
TECHNICAL DATA
Scan Time 30 seconds (user-adjustable)
Power Supply 100-240 V AC, 50/60 Hz
PROCESS ANALYZER
Classification C1D2 Standard, C1D1 Optional
Control System Communication Modbus RTU Standard (Options: Modbus TCP, 4-20 mA Analog Output Module)
Sample Up to 150°C and up to 7000 kPa (1000 psi)
BENCHTOP ANALYZER
Data Storage Data automatically logged and stored; Standard TCP/IP connection for integration to LIMS
Dimensions (WxHxD) 305 x 397 x 349 mm (12” x 15”x 13”)
Your distributor:
Grabner Instruments
Messtechnik GmbH
A-1220 Vienna/Austria
Dr. Otto-Neurath-Gasse 1
Phone +43/1/282 16 27-0
Fax +43/1/282 16 27-300
grabner.sales@ametek.com
© AMETEK, Inc. V 1.02. Specifications subject to change without notice.
www.grabner-instruments.com