Professional Documents
Culture Documents
Transmission Platform
GRL8004SII Chassis
Operation Manual
GRL8004SⅡ, isa standard 19-inch wide and, 3RU high optical platform, and has 17 slots. It
supports 15 functional modules in a single power supply and 13 functional modules in dual
power-sharing power supply. This platform supports a variety of functional modules, including
modules; high-density, small size, excellent thermal design, seven removable cooling fan on
backplane that is used to cool the entire the GRL optical transmission platform. There is
large-size LCD display and touch buttons on front panel that the user can view locally and
set the module parameters, which greatly facilitates the maintenance of the equipment. The
platform comes with a network management module, so that users can remote monitor and
adjust the operation of the equipment from the internet. The user-friendly design allows the
becomes one of the best optical platform, and is the ideal choice for network operators.
1.2 Feature
3RU, 19-inch standard chassis
High density, one platform can support at most 15 modules
With 7 groups of separate cooling fans
Hot-swap
Can configure dual power supply sharing working mode (backup power supply
occupied 14/15 of the slots)
Large LCD display on front panel
Touch buttons
The user-friendly design allows the user to replace the module without
disassembly RF cable maintenance.
With network management module
1.3 Specification
Working temperature 0 to 50℃(32 to 122℉)
Storage temperature -40 to 70℃(-40 to 158℉)
Relative humidity Maximum 85% non-condensing
Structure standard chassis. 3RU
Internal space 17 slots
Dimension 482mm(W)×133mm(H)×515mm( D)
Weight 8.3Kg(Including 1 power supply and network management
module)
2. External Structure
Chassis panel structure please see fig 2.1 and description please see table 2.1
Fig 2.1 GRL8004SⅡ front panel and rear panel
KT has inspected all products before delivery, to avoid mechanical and electronic
defects. When you receive the product, please:
3.1 Check whether product packaging is damaged during transport
3.2 Open the packaging of all modules and chassis
3.3 After opening the package, please keep all packaging materials for future reprint and
storage. If the products are damaged, please contact the shipper and immediately notify KT,
and use the original packaging (or similar function packaging) to send back to KT companies
for maintenance.
4. Precautions
The Manual provides for safety standards in product design, manufacture and use. If
violate these safety precautions, it may cause damage to the equipment, and KT Company
does not undertake any responsibility
Warning: Do not make the module work beyond its maximum rated working conditions. It will
lead to poor product performance and reduce module service life, even dangerous.
Warning: This module working temperature is 0 to 50 º C (32 to 122 º F).
Warning: This module storage temperature is -40 to +70 º C (-40 to +158 º F), relative
humidity is 85% (non-condensing), and away from sources of ignition and corrosive
substances.
Warning: some functional modules are sensitive for surge, please ensure that
GRL8004SⅡ is reliable grounded!
Warning:Force to install the module with a curved PIN feet will damage the
backplane of GRL8004S Ⅱ..
Note: All modules are hot-swap. Modules can be plugged when GRL8004S Ⅱ is
working.
GRL8004SⅡ Platform Module Configuration
Module Type
1310nm downstream laser transmitter module GFB9XX1AⅡ
1550nm directly modulated laser transmitter module GTB9XX1AⅡ
Analog optical fiber amplifier module GABXX02 series
Optical switch module GKB8201BⅡ
Optical receiver module GSB921BⅡ
Headend amplifier RSBY930DCⅡ
Power supply module PWR8004BⅡ
Equipment management module NE8004SⅡET