‘Tek boyutlu bir alan tizerinde f sekil fonksiyonunun belirli integrali u € [-1 ; +1] su sekilde tahmin edilebili:
[ore= Sar
+ kullamet arabirimi € [-1; +1] entegrasyon noktalan olarak adlandinhir.
+ Ai, ui ile iligkili bir agarhk faktOriidair.
Yeterli dogruluk elde etmek igin gereken entegrasyon noktalarinmn sayist f fonksiyonunun bigimine baglidir. flineer
bir fonksiyon ise, fyi tam olarak entegre etmek igin bir integrasyon noktast yeterlidir. f bir kibik polinom fonksiyomu
ise, kesin gdziimi elde etmek igin iki integrasyon noktast yeterlidir.
Sekil 7-21, birinci derece, iigiincii derece ve besinci derece polinomlari entegre etmek igin Gauss sayisal entegrasyon
semasinin bir grafik temsilini gostermektedir.
inten noe [ira-are
PotvwoMiaus
fea¢% au tou? tow? tous eau!
ul . att.
a 0G +05
Tablo 7-5, farkh polinom derecelerine sahip bir polinom fonksiyonu f icin tam géziimii elde etmek icin gereken
integrasyon noktalarinin sayisim géstermektedir.ave 75
Neen oF Inreonaow
POUNOMIAL | NUMBEROF | wrgpamion | WEIGHT | NUMERICAL | Pons so am mie
DEGREE OF SHAPE | INTEGRATION POINTS. FACTORS INTEGRATION exacr Sowumian oF A
FuNcTionf | POINTS iy a SCHEME | Foeouna: Funenow
paar ‘ tut
“wwe |? 2
42519
ee 3 tee 3x3
= a=5/9
Let’ verify that che exact integral of a general cubic polynomial on the interval [-1; +1]
‘can be obtained using the two integration points ty = 1/3 and ty = ~1/V3 with the
‘wo weight factors 4, = 4= 1.
“The general cubie polynomial shape function 1s
ae at Faye, far?
“The exact integral of fon the interval [-1; +1] is:
“ 2 rans
[faa =20y +300
‘The Gas integration with two integration points is written as:
[fA +au, tou taut) +i + au, tau and) ears
Ezquating the Cass integration Eq 7-4 with the exact solution Bq 7-3 and considering
at the Gauss integration and exact solutions should be equal, given any values forthe
coeffcents 2,0, 2,,and 2, we obtain the following four equations:
Ataed
Jy, yy = 0 bors
Ait + At = WS
Ad + dat= 0
system Eq 7-5 gives us = 1/¥3, up =-1/V3,4, = 4-1.
Let’ illustrate the concepts of fill integration and reduced integration for the two-
dimensional quadrilateral element ‘The concept is the same for all elements,