Professional Documents
Culture Documents
Bosch’s AutoDome modular camera system is a Migrating from a basic dome to one with advanced
revolutionary new concept in dome cameras. More than features such as AutoTrack II intelligent tracking can be
just a series of cameras, it’s a dome platform built around done quickly and easily, without requiring dome removal
a system of intelligent, interchangeable modules that or rewiring. AutoDome’s Ethernet communications
allow you to update camera functionality quickly and cost- module allows you to add IP functionality while
effectively. Using common components lets you install a maintaining connectivity to existing analog inputs and
basic camera system today and migrate to a more outputs.
advanced version tomorrow – without having to replace
200 Series highlights
the entire dome, thus protecting your initial investment.
The AutoDome 200 Series is an economical, high-speed
Interchangeable modules dome camera that uses a high-performance, 18x color PTZ
The entire AutoDome system is based on five camera. The 200 Series supports a variety of standard and
interchangeable modules: the CPU, camera, housing, optional video and data transmission methods, including
communications, and power supply. Simply swap one of Bilinx (over coax and UTP), fiber, and even TCP/IP over
AutoDome’s interchangeable modules and quickly Ethernet. Remote control, configuration, and firmware
upgrade from analog to IP, color to day/night, or add updates can also be performed over these cables, offering
motion tracking. Never before have you had the ability to you unparalleled control of your cameras.
adapt a security system to your changing needs this
The optional IP Communications Module has hybrid
quickly or inexpensively.
functionality to protect your current analog technology
By using the same housing components, all installations investment while providing a clear and stable migration
have a consistent look, and observers have no idea which path to fully digital, IP-based solutions. This allows you to
type of camera (if any) is watching over them. This move to IP video at your own pace – all at once or one
unique, modular design also gives you the flexibility to camera at a time. And since all AutoDome modules are
move cameras between different housings when special completely interchangeable, there is no need to replace
coverage is needed, or as site plan requirements change. expensive components (for example cameras) or labor-
For example, an 18x PTZ camera over a specific area intensive components (for example mounts and
could easily be “hot-swapped” to a 26x day/night without housings).
removing the power.
www.boschsecurity.com
2 | AutoDome 200 Series PTZ Camera System
Electromagnetic Com- Complies with FCC Part 15, ICES-003, and CE reference numbers 6, 7, or 8.
patibility (EMC) regulations, including EN50130-4 and 3 Fiber optic option is multi-mode with biphase. Requires LTC 4629 at
EN50121-4
the system.
Product Safety Complies with CE regulations, UL, CSA, EN, and
IEC Standards 4 Roof mount mounts to vertical Parapet. For flat roof installation, order
an additional LTC 9230/01 Flat Roof Adapter Plate.
www.boschsecurity.com
4 | AutoDome 200 Series PTZ Camera System
Camera 18x Color Protection on Video Peak current 10 kA (Gas Tube Arrester), peak pow-
er 1000 W (10/1000 μ)
Imager 1/4 in. Exview HAD CCD Protection on Peak current 10 A, peak power 300 W (8/20 μ)
(752 x 582 PAL)/(768 x 494 NTSC) RS-232/485, Bi-
phase
Lens 18x Zoom (4.1–73.8 mm)
F1.4 to F3.0 Protection on Alarm Peak current 17 A, peak power 300 W (8/20 μ)
Inputs
Focus Automatic with manual override
Protection on Alarm Peak current 2 A, peak power 300 W (8/20 μ)
Iris Automatic with manual override
Outputs
Field of View 2.7° to 48°
Protection on Relay Peak current 7.3 A, peak power 600 W
Video Output 1.0 Vp-p, 75 Ohm Outputs (10/1000 μ)
Gain Control Off/Auto (with adjustable limit) Protection on Power Peak current 7.3 A, peak power 600 W
Synchronization Line-Lock (–120° to 120° vertical phase ad- Input (Dome) (10/1000 μ)
just) or internal crystal Protection on Pow- Peak current 21.4 A, peak power 1500 W
Aperture Correction Horizontal and vertical er Output (Arm Pow- (10/1000 μ)
er Supply)
Horizontal Resolution NTSC: 470 TVL, typical
PAL: 480 TVL, typical Environmental
Sensitivity (typical) 30 IRE 50 IRE
Model In-Ceiling Indoor EnviroDome®
F1.4, 1/60 (1/50) 0.5 lx 0.8 lx Pendant
shutter, max AGC
Design Rat- Plenum Rated IP66 IP66
Electronic Shutter Speed 1 to 1/10,000 ing
(AES)
Operating –10°C to 50°C –10°C to 50°C –40°C to 50°C
SNR >50 dB Temp. (14°F to 122°F) (14°F to 122°F) (–40°F to 122°F)
White Balance 2000 K to 10,000 K Storage –40°C to 60°C –40°C to 60°C –40°C to 60°C
Mechanical/Electrical Temp. (–40°F to 140°F) (–40°F to 140°F) (–40°F to 140°F)
Humidity 0% to 90% rela- 0% to 90% rela- 0% to 100% relative,
Model In-Ceiling Indoor EnviroDome® tive, non-con- tive, non-con- condensing
Pendant densing densing
Weight 2.66 kg (5.86 lb) 2.88 kg (6.3 lb) 3.32 kg (7.3 lb) Miscellaneous
Pan Range 360° cont. 360° cont. 360° cont.
Sectors/Titling 16 independent sectors with 20-character titles/sec-
Tilt Angle 1° above horizon 18° above hori- 18° above hori- tor
zon zon
Camera Setup/ Biphase, RS-232, RS-485, Bilinx7 (coax)
Variable Speed 0.1°/s-120°/s 0.1°/s-120°/s 0.1°/s-120°/s Control
Pre-position Pan: 360°/s Pan: 360°/s Pan: 360°/s Communications Biphase, Bilinx7, Pelco P, and Pelco D
Speed Tilt: 100°/s Tilt: 100°/s Tilt: 100°/s Protocols
Preset Accuracy ± 0.1° typ. ± 0.1° typ. ± 0.1° typ. Pre-positions 64, each with 20-character titles
Power 21-30 VAC 21-30 VAC 21-30 VAC Preset Tour One (1), consisting of up to 64 scenes, consecutively
50/60 Hz 50/60 Hz 50/60 Hz
Supported Lan- Czech, Dutch, English, French, German, Italian, Polish,
Power Draw: (typ) guages Portuguese, Russian and Spanish
Analog 10 W 10 W 46 W6 7 Bilinx not available on Ethernet models.
Models
Ethernet 14 W 14 W 50 W6 User Connections
Models
Power (Camera) 21-30 VAC, 50/60 Hz
6 Add 16 W if using VG4-SHTR-XT kit.
Power (Heater) 21-30 VAC, 50/60 Hz
Biphase ± Control Data
Audio Line In8 9 K Ohm typ, 5.5 Vp-p max
RS-232 RX/TX or RS-485 ± - optional control data
(dip switch selectable)
Video BNC/UTP9
AutoDome 200 Series PTZ Camera System | 5
www.boschsecurity.com
6 | AutoDome 200 Series PTZ Camera System
134.6 11.0
469.1 188.0 5.30
7.40 0.43
18.47
1
374.8
14.75
2
184.0
7.25
460.1
18.12
R
1a 3a 160.0
6.30
366.4
14.43
2a 185.7
7.31
22.6
0.90
86.7
3.42
76.6 R
3.01
176.0
6.93
4 299.4
88.9
3.50 201.8
11.79 7.94
1.90
5 0.75
88.9
3.50
94.1
3.70
76.6 10.2
188.9 R
3.01 0.40
7.44
204.3 77.0 R
3.03
6 mm
8.04 in.
224.0
8.82 185.7
7.31
366.4
58 14.43
2.3 2a
6.35 Typ.
175
6.9
5 8 0.25
111 Typ.
76.6 R Ø 10.4 4.37
3.01 0.41
193 254
7.6 10.00
16.0 Typ.
7 152.4
279.4 0.63
11.00
6.0 1-1/2 NPT
378
69.9 1190.8 14.88
2.75 46.88
38 6.35
1.5 0.25
133.4 170.0
133.4 616 6.69
5.25 5.25 11.0
178 24.25 9 Ø
04.3 134.6
7.0 6 5.30
101.6 Typ.
203 4.0 216.4 160.0
8.0 236 346.2 8.52 6.30
9.3 13.63 10.4
8 x 0.41
219.1 mm
8.63 114.3 976.1 50.8
in. 4.50 Typ. 2.00
228.6 38.43 88.1
9.0 3.47
279.4 1022.4 105.0
11.0 40.25 4.13
www.boschsecurity.com
8 | AutoDome 200 Series PTZ Camera System
Ordering Information
AutoDome® 200 Series PTZ Camera VG4-200
System
Contact your Bosch Security Systems, Inc.
representative for complete ordering infor-
mation.
Software Options
VP-CFGSFT Configuration Tool for Imaging VP-CFGSFT
Devices
Camera configuration software for use with
Bilinx and IP cameras
© Bosch Security Systems Inc. 2010 | Data subject to change without notice
T3382520331 | Cur: en-US, V27, 2 Dec 2010