Professional Documents
Culture Documents
Grille Sample Shop Drawing Set
Grille Sample Shop Drawing Set
Grille Sample Shop Drawing Set
QUANTITIES TO COMPLETE THE PROJECT. IF THERE ARE ANY DISCREPANCIES IN NATURALLY PRESENT IN THE CHARACTER OF THE WOODS. A1.1 ENLARGED REFLECTED CEILING PLANS (RCP) CONFIDENTIAL
●
QUANTITIES OR SIZES THAT DEVIATE FROM THESE PLANS THE CONTRACTOR
MUST NOTIFY ASI PRIOR TO ANY MANUFACTURING. CONTRACTOR MUST REVIEW FINISH
A1.2 ENLARGED REFLECTED CEILING PLANS (RCP) ● NOT FOR PRODUCTION
AND VERIFY ALL DIMENSIONS IN THE FIELD, MARK-UP, CORRECTING ANY A1.3 ENLARGED REFLECTED CEILING PLANS (RCP) ● NOT FOR CONSTRUCTION
DIMENSIONS AFFECTING PANELS AND RETURN TO ASI FOR CORRECTIONS TO THE BECAUSE OF NATURAL VARIATIONS IN COLOR AND GRAIN OF WOOD, FINISHED 8/26/19
A3.0 CUSTOM DETAILS ●
PLANS. ASI WILL APPLY THESE CHANGES FOR FINAL SIGN-OFF AND PRODUCTION. PANELS CANNOT BE EXPECTED TO MATCH EXACTLY TO SUPPLIED SAMPLE BUT
ASI WILL NOT BE RESPONSIBLE FOR ANY PANEL CHANGES NOT CORRECTED BY SHOULD BE WITHIN A SAMPLE RANGE. U.V. LIGHT WILL AFFECT THE COLOR OF A3.1 CUSTOM DETAILS ●
THE CONTRACTOR DURING THIS PROCESS. EXPOSED WOODS, OVER TIME THE PANELS MAY DARKEN OR LIGHTEN. ASI A4.0 CEILING STANDARD DETAILS ●
TAKES NO RESPONSIBILITY FOR NATURAL COLOR VARIATIONS, GRAIN AND A6.0 SCHEDULES & LITERATURE
APPROVAL SIGNATURES ●
TEXTURE VARIANCES, OR MATERIALS ADVERSELY EXPOSED TO U.V. LIGHT.
ALL DIMENSIONS AND DESIGN ELEMENTS OF THE PROJECT MUST BE APPROVED PANEL CONSTRUCTION
AND SIGNED OFF ON BEFORE ASI CAN BEGIN PRODUCTION. DEPENDING ON THE
PROJECT, EITHER AN ARCHITECT'S STAMP MARKED "APPROVED" OR A ASI PANELS ARE NOT DESIGNED FOR STRUCTURAL USE. LIGHTING FIXTURES,
SIGNATURE BY THE CONTRACTOR CAN BE ACCEPTABLE. PROJECTS CANNOT BE MECH./H.V.A.C., GRILLES, DIFFUSERS, EQUIPMENT, ETC., OR ANY OTHER TYPES
STARTED UNTIL APPROVED. RETURNING THE DRAWINGS WITHOUT A SIGNATURE OF FIXTURES MUST BE INDEPENDENTLY SUPPORTED IN COMPLIANCE WITH ALL
GENERAL NOTES
OF ACCLIMATION. ALL WET WORK AT THE JOB SITE MUST BE COMPLETED AND SPECIAL DIRECTION/DETAILS ARE PROVIDED, PRICED, APPROVED & ACCEPTED.
DRY. ASI TAKES NO RESPONSIBILITY FOR ANY DAMAGE OR WARPING OF PANELS
IF THESE CONDITIONS ARE NOT STRICTLY ADHERED TO.
WOOD SPECIES
PROJECT
TARA LARSON
PAGE
LOCATION
PRODUCT MATRIX N/A
CUSTOMER PRODUCT CODE DESCRIPTION ASI PRODUCT CODE
LEGEND & TYPICAL NOTES:
N/A GRILLE CEILING PANEL A1
· GRID & INSTALLATION BY OTHERS ARCHITECT
N/A GRILLE CEILING PANEL A2 N/A
APPROVED · ALL CLIPS TO BE SITE INSTALLED
· CONTRACTOR IS RESPONSIBLE TO VERIFY N/A GRILLE CEILING PANEL A3
REVISE/RESUBMIT SQUARE FOOTAGE, PANEL QUANTITIES, SIZES
N/A GRILLE CEILING PANEL A4
(DIMENSIONS) ON SHOP DRAWINGS
CONTRACTOR
· FURRING/BLOCKING AND INSTALLATION BY OTHERS N/A GRILLE CEILING PANEL A5 N/A
N/A GRILLE CEILING PANEL A6
( * ) INDICATES PANELS TO BE FIELD CUT ON SITE AND/OR
NAME ARE PANEL DROPS CUT ON SITE N/A GRILLE CEILING PANEL A7
( ! ) INDICATES DIFFICULTY OF FIELD CUTTING & REPRESENTATIVE
N/A GRILLE CEILING PANEL A8
INSTALLATION DUE TO LAYOUT OF SMALL PANELS N/A
SIGNATURE
APPROVED BY
SUBMITTAL DATE
8/26/19
G1.0
123 Columbia Court North, Chaska,
Minnesota 55318 P. 800.527.6253
RESIDENTIAL
AMENITY
CL02
W/C
120
CONFIDENTIAL
109
NOT FOR PRODUCTION
NOT FOR CONSTRUCTION
8/26/19
HALLWAY
HALLWAY
PUBLIC
W/C W/C CORRIDOR B
MAIL RM 118 119 125
108
CL02
1J
1J
EX. ELEC RM
FACILITY
CL03
SS1
113
107
CL03 CL03
CL04
CL05
CL03
CL02
CL03
SECURITY RM
110
1K
1K
CL03
DATA RM
PRIVATE
106
CORRIDOR
122
CL05
CL04
CL04
HALLWAY
HALLWAY
CL02
HALLWAY
SS1
LAUNDRY CL04
127
1L
1L
OVERVIEW
CL04
EX. PUMP
105
103
RM
PROJECT
TARA LARSON
PAGE
CL03
CL03
EX. ELEC RM
104
SS1
CL03
102
CL03
LOCATION
1M
N/A
116
JC
SS1
ARCHITECT
N/A
COMMUNITY
1
HALLWAY
FACILITY
101
CORRIDOR A
A1.0
PUBLIC
126
CL05
CONTRACTOR
N/A
1N
REPRESENTATIVE
N/A
DRAWING NORTH
1 FIRST FLOOR OVERVIEW
A0.0 SCALE: 1/8" = 1' 0" ARCH REF: N/A
RELEASES
DATE DESCRIPTION BY
8/26/19 INITIAL RELEASE TL
--- REVISION 1 ---
--- REVISION 2 ---
--- REVISION 3 ---
--- REVISION 4 ---
--- REVISION 5 ---
INVOICE
12345 SHEET NUMBER
APPROVED BY
SUBMITTAL DATE
8/26/19
A0.0
NOTE:
ASI CANNOT DETERMINE LOCATION OF LIGHTING, SPRINKLERS, DIFFUSERS
OR ASSOCIATED COMPONENTS. INSTALLER TO VERIFY W/ ARCHITECT AND
ADJACENT TRADES TO MAINTAIN DESIGN INTENT AND FEASIBILITY. SIZES OF
CEILING PENETRATIONS ARE ESTIMATED AND DO NOT ACCURATELY
REPRESENT PRODUCTS TO BE INSTALLED - ALL PENETRATIONS IN ASI
PRODUCTS ARE TO BE FIELD CUT AND COORDINATED. 123 Columbia Court North, Chaska,
Minnesota 55318 P. 800.527.6253
71 3/4" O.D.
A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1
85 5/8" O.D.
NOT FOR PRODUCTION
V.I.F.
NOT FOR CONSTRUCTION
V.I.F.
1
12 8/26/19
PUBLIC
A4.0
A4.0
13
12
A4.0
A4.0
18 3/8" V.I.F.
88 3/4" V.I.F.
11 7/16" V.I.F.
44 3/8" V.I.F. 44 3/8" V.I.F.
15
WALL ANGLE AT 16"HD T-GRID CROSS TEES
PROJECT
TARA LARSON
WALL ANGLE AT
PAGE
PERIMETER (TYP)
24"
84 3/4" V.I.F.
24"
15
16"
HD T-GRID MAINS
70 7/8" V.I.F.
(BY OTHER) - 2' OC MAX
LOCATION
CORRIDOR A
24"
15 N/A
16"
HD T-GRID MAINS
(BY OTHER) - 2' OC MAX
PUBLIC
24"
126
ARCHITECT
N/A
15
16"HD T-GRID CROSS TEES
(BY OTHER) - 4' OC MAX
18 3/8" V.I.F.
11 7/16" V.I.F.
28 3/8" V.I.F. 48" 48" 48" 48" 28 3/8" V.I.F. CONTRACTOR
N/A
248 3/4" V.I.F.
REPRESENTATIVE
N/A
2 PUBLIC CORRIDOR A 126 PROPOSED T-GRID PLAN 4 FIRST FLOOR MIDDLE AREA 1 T-GRID PLAN
A1.0 SCALE: 1/2" = 1' 0" ARCH REF: N/A A1.0 SCALE: 1/2" = 1' 0" ARCH REF: N/A
DRAWING NORTH
RELEASES
DATE DESCRIPTION BY
8/26/19 INITIAL RELEASE TL
--- REVISION 1 ---
--- REVISION 2 ---
--- REVISION 3 ---
--- REVISION 4 ---
--- REVISION 5 ---
INVOICE
12345 SHEET NUMBER
APPROVED BY
SUBMITTAL DATE
8/26/19
A1.0
NOTE:
ASI CANNOT DETERMINE LOCATION OF LIGHTING, SPRINKLERS, DIFFUSERS
OR ASSOCIATED COMPONENTS. INSTALLER TO VERIFY W/ ARCHITECT AND
ADJACENT TRADES TO MAINTAIN DESIGN INTENT AND FEASIBILITY. SIZES OF
CEILING PENETRATIONS ARE ESTIMATED AND DO NOT ACCURATELY
REPRESENT PRODUCTS TO BE INSTALLED - ALL PENETRATIONS IN ASI
PRODUCTS ARE TO BE FIELD CUT AND COORDINATED. 123 Columbia Court North, Chaska,
Minnesota 55318 P. 800.527.6253
21 1/8" V.I.F.
V.I.F. BE FOLLOWED.READ THIS
DRAWING IN CONNECTION WITH
GENERAL ARCHITECTURAL
14 PLANS, STRUCTURAL PLANS,
FIELD CUT PANEL TYP. A4.0 AND OTHER RELATED
DRAWINGS. THESE DRAWINGS
R E P R E S E N T A S I ' S
13 UNDERSTANDING AND
14
A4.0 INTERPRETATION OF THE
A4.0
ARCHITECTURAL DRAWINGS
AND HOW ASI PRODUCTS
RELATE TO THE PROJECT.
24"
COPYRIGHT ASI © 2019
CONFIDENTIAL
114 5/16"
13
A4.0 3 NOT FOR PRODUCTION
24"
A3.0 NOT FOR CONSTRUCTION
8/26/19
90 1/8"
TYP.
V.I.F.
A3 A3 A3 A3 A3 A3 A3 A3 A3
22 9/16" V.I.F.
24"
1"
23 13/16" V.I.F.
A4.0
15
16"HD T-GRID CROSS TEES
24"
84 9/16"
(BY OTHER) - 4' OC MAX
A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4
13 11/16" V.I.F.
370 15/16" O.D.
11 13/16" V.I.F.
PROJECT
84 9/16"
255 5/8"
TARA LARSON
A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4
PAGE
23 13/16" V.I.F.
PERIMETER (TYP)
24"
LOCATION
N/A
1"
ARCHITECT
13 11/16" V.I.F.
N/A
24"
CONTRACTOR
N/A
84 9/16"
A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4 A4
23 13/16" V.I.F.
24"
REPRESENTATIVE
15
16"
HD T-GRID MAINS N/A
DRAWING NORTH
14 4 TYP. 2 RELEASES
12'-0" A3.0 TYP. FIELD CUT PANEL TYP. 34 3/8" V.I.F. 48" 48" 48" 34 3/8" V.I.F.
A4.0 A1 A4.0 DATE DESCRIPTION BY
1 FIRST FLOOR MIDDLE AREA 2 PROPOSED RCP 2 FIRST FLOOR MIDDLE AREA 2 PROPOSED T-GRID PLAN INVOICE
12345 SHEET NUMBER
A1.1 SCALE: 1/2" = 1' 0" ARCH REF: N/A A1.1 SCALE: 1/2" = 1' 0" ARCH REF: N/A
APPROVED BY
SUBMITTAL DATE
8/26/19
A1.1
NOTE:
ASI CANNOT DETERMINE LOCATION OF LIGHTING, SPRINKLERS, DIFFUSERS
OR ASSOCIATED COMPONENTS. INSTALLER TO VERIFY W/ ARCHITECT AND
ADJACENT TRADES TO MAINTAIN DESIGN INTENT AND FEASIBILITY. SIZES OF
CEILING PENETRATIONS ARE ESTIMATED AND DO NOT ACCURATELY
REPRESENT PRODUCTS TO BE INSTALLED - ALL PENETRATIONS IN ASI
PRODUCTS ARE TO BE FIELD CUT AND COORDINATED. 123 Columbia Court North, Chaska,
Minnesota 55318 P. 800.527.6253
MAIL RM
COPYRIGHT ASI © 2019
MAIL RM
24"
13
A4.0 CONFIDENTIAL
108 108 NOT FOR PRODUCTION
NOT FOR CONSTRUCTION
8/26/19
24"
A5 A5 A5 A5 A5 A5 A5 A5 A5 A5 A5 A5 A5 A5 A5 A5 A5 A5
118 1/8"
24"
V.I.F.
21 1/4" V.I.F.
12
A4.0
CL04
24"
118 1/8"
A5 A5 A5 A5 A5 A5 A5 A5 A5 A5 A5 A5 A5 A5 A5 A5 A5 A5
24"
24"
PROJECT
TARA LARSON
PAGE
13
24"
A4.0
LOCATION
N/A
1 MAIL ROOM 108 PROPOSED RCP 2 MAIL ROOM 108 PROPOSED T-GRID PLAN CONTRACTOR
A1.2 SCALE: 1/2" = 1' 0" ARCH REF: N/A A1.2 SCALE: 1/2" = 1' 0" ARCH REF: N/A N/A
REPRESENTATIVE
N/A
DRAWING NORTH
RELEASES
DATE DESCRIPTION BY
8/26/19 INITIAL RELEASE TL
--- REVISION 1 ---
--- REVISION 2 ---
--- REVISION 3 ---
--- REVISION 4 ---
--- REVISION 5 ---
INVOICE
12345 SHEET NUMBER
APPROVED BY
SUBMITTAL DATE
8/26/19
A1.2
NOTE:
ASI CANNOT DETERMINE LOCATION OF LIGHTING, SPRINKLERS, DIFFUSERS
OR ASSOCIATED COMPONENTS. INSTALLER TO VERIFY W/ ARCHITECT AND
ADJACENT TRADES TO MAINTAIN DESIGN INTENT AND FEASIBILITY. SIZES OF
CEILING PENETRATIONS ARE ESTIMATED AND DO NOT ACCURATELY
REPRESENT PRODUCTS TO BE INSTALLED - ALL PENETRATIONS IN ASI
PRODUCTS ARE TO BE FIELD CUT AND COORDINATED. 123 Columbia Court North, Chaska,
Minnesota 55318 P. 800.527.6253
34 3/8" V.I.F.
A6
PUBLIC FIELD CUT PANEL
PUBLIC AND HOW ASI PRODUCTS
14 RELATE TO THE PROJECT.
A4.0
CORRIDOR B CORRIDOR B
A6 COPYRIGHT ASI © 2019
A6
125 125 CONFIDENTIAL
15 NOT FOR PRODUCTION
16"
HD T-GRID MAINS NOT FOR CONSTRUCTION
A6 (BY OTHER) - 2' OC MAX 8/26/19
48"
A6
A6
48"
A6
A6
15
16"HD T-GRID CROSS TEES
48"
A6 (BY OTHER) - 4' OC MAX
A6
375 7/8" O.D.
A6
V.I.F.
12'-0"
A6 A1
48"
PROJECT
TARA LARSON
22 15/16" V.I.F.
A6
PAGE
34 3/8" V.I.F.
13 11 14 4 15 15
A6 TYP. 16"HD T-GRID MAINS 16"HD T-GRID CROSS TEES
A4.0 A3.1
1 5/8"
14 A4.0 A4.0 (BY OTHER) - 2' OC MAX (BY OTHER) - 4' OC MAX
1"
ARCHITECT
A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A8 A8 A8 A8 A8 A8 A8 A8 A8 A8 A8 N/A
13
A4.0 24"
CONTRACTOR
113 1/4" V.I.F.
N/A
1 13
24"
A4.0 A4.0
REPRESENTATIVE
N/A
14 12'-0"
24"
1 PUBLIC CORRIDOR B 125 PROPOSED RCP 2 PUBLIC CORRIDOR B 125 PROPOSED T-GRID PLAN APPROVED BY
A1.3 SCALE: 1/2" = 1' 0" ARCH REF: N/A A1.3 SCALE: 1/2" = 1' 0" ARCH REF: N/A
SUBMITTAL DATE
8/26/19
A1.3
12 1/8"
12 1/8"
Minnesota 55318 P. 800.527.6253
4 1/8"
3/8"
ARCHITECTURAL DRAWINGS
7/8" AND HOW ASI PRODUCTS
4 1/8"
3/8"
7/8"
RELATE TO THE PROJECT.
COPYRIGHT ASI © 2019
CONFIDENTIAL
3 3/4"
3 3/4"
NOT FOR CONSTRUCTION
8/26/19
12" 3 3/4"
1/8" 12"
3 3/4"
1/8"
3/4"
4" O.C. 3 1/4" 3/4"
CUSTOM DETAILS
12 1/8"
PROJECT
TARA LARSON
PAGE
84 9/16"
114 5/16"
LOCATION
N/A
9 1/8" 12" 12" 12" 12" 12" 12" 12" 12" 9 1/8" 12 1/4" 12" 12" 12" 12" 12" 12 1/4" ARCHITECT
4 1/8"
N/A
3/8"
4 1/8"
3/8"
7/8"
7/8"
CONTRACTOR
N/A
3 3/4"
3 3/4"
REPRESENTATIVE
N/A
12"
3 3/4"
12"
3 3/4"
RELEASES
DATE DESCRIPTION BY
APPROVED BY
SUBMITTAL DATE
8/26/19
A3.0
123 Columbia Court North, Chaska,
12 1/8"
12 1/8"
4 1/8"
4 1/8"
3/8"
3/8"
CONFIDENTIAL
NOT FOR PRODUCTION
3 3/4"
3 3/4"
12" 12"
3 3/4"
3 3/4"
1/8" 1/8"
3/4" 3/4"
CUSTOM DETAILS
12 1/8"
PROJECT
TARA LARSON
PAGE
70 3/4"
114 1/8"
LOCATION
N/A
4 1/8"
N/A
3/8"
7/8"
4 1/8"
3/8"
7/8"
CONTRACTOR
N/A
3 3/4"
3 3/4"
REPRESENTATIVE
N/A
12"
3 3/4"
12" 1/8"
3 3/4"
DRAWING NORTH
1/8"
RELEASES
DATE DESCRIPTION BY
3/4" 8/26/19 INITIAL RELEASE TL
3/4" 4" O.C. 3 1/4" --- REVISION 1 ---
4" O.C. 3 1/4"
--- REVISION 2 ---
--- REVISION 3 ---
--- REVISION 4 ---
3 A7 PANEL DETAILS 4 A8 PANEL DETAILS --- REVISION 5 ---
A3.1 SCALE: 1 1/2" = 1' 0" ARCH REF: N/A A3.1 SCALE: 1 1/2" = 1' 0" ARCH REF: N/A
INVOICE
12345 SHEET NUMBER
APPROVED BY
SUBMITTAL DATE
8/26/19
A3.1
15
15
16" HEAVY DUTY 16" HEAVY DUTY
T-GRID (BY OTHER) T-GRID (BY OTHER)
15 (2x4 LAYOUT TYP) (2X4 LAYOUT TYP)
16" HEAVY DUTY
T-GRID (BY OTHER)
(2X4 LAYOUT TYP)
N
TRIM (AS SPECIFIED)
INDEPENDENTLY SUPPORTED Minnesota 55318 P. 800.527.6253
O
LINEAR LIGHT: FIELD CUT INDEPENDENTLY SUPPORTED
CUSTOMER PROVIDED FIXTURE:
E
PENETRATION
1
4" X 11 4" DOWEL FIELD CUT PENETRATION
C
INDEPENDENTLY SUPPORTED
CUSTOMER PROVIDED FIXTURE:
15
16"
H.D. T-GRID
1" ACOUSTICAL BACKER (2" AVAILABLE)
FIELD CUT PENETRATION
E N
(BY OTHER)
STUB-IN GRID AS NECESSARY
FO
BLACK BACKER GENERAL ARCHITECTURAL
PLANS, STRUCTURAL PLANS,
AND OTHER RELATED
BACKER CLIP - 24" OC MAX
(2 PER BACKER TYPICAL)
DRAWINGS. THESE DRAWINGS
BACKER CLIP - 24" OC MAX
BACKER CLIP - 24" OC MAX
(2 PER BACKER TYPICAL)
R E P R E S E N T A S I ' S
(2 PER BACKER TYPICAL)
UNDERSTANDING AND
INTERPRETATION OF THE
ARCHITECTURAL DRAWINGS
AND HOW ASI PRODUCTS
RELATE TO THE PROJECT.
L Y 1 PENDANT LIGHT DETAIL - PLAN VIEW 2 LINEAR LIGHT DETAIL - PLAN VIEW 3 SPRINKLER HEAD DETAIL - PLAN VIEW
ON A4.0 SCALE: 1 1/2" = 1'-0" ARCH REF: N/A A4.0 SCALE: 1" = 1'-0" ARCH REF: N/A A4.0 SCALE: 1 1/2" = 1'-0" ARCH REF: N/A
CONFIDENTIAL
COPYRIGHT ASI © 2019
C E
E N NOT FOR PRODUCTION
RE Y
15
16" HEAVY DUTY
R L
T-GRID (BY OTHER)
INDEPENDENTLY SUPPORTED
ON SUSPENSION
(BY OTHER)
L Y
15
16" HEAVY DUTY
T-GRID (BY OTHER)
LY
15
16" HEAVY DUTY
T-GRID (BY OTHER)
E N
INDEPENDENTLY SUPPORTED
N
INDEPENDENTLY SUPPORTED
C
CUSTOMER PROVIDED FIXTURE CUSTOMER PROVIDED FIXTURE SUSPENSION
O
SUSPENSION
EN E O (BY OTHER)
E
(BY OTHER)
C
FIELD CUT
E F ER FIELD CUT
E NC FIELD CUT
R EN
R ER E
BACKER CLIP - 24" OC MAX
(2 PER BACKER TYPICAL)
OR TRIM PLATE
RECOMMENDED
R E F R EF
F O RECOMMENDED
(BY OTHER)
(2 PER BACKER TYPICAL) RECOMMENDED
(BY OTHER)
4 CEILING ISOMETRIC - TYP. 5 PENDANT LIGHT DETAIL - SECTION VIEW 6 LINEAR LIGHT DETAIL - SECTION VIEW 7 SPRINKLER HEAD DETAIL - SECTION VIEW
15
16" HEAVY DUTY
T-GRID (BY OTHER)
(2X4 LAYOUT TYP)
L Y SUSPENSION
(BY OTHER)
SUSPENSION
(BY OTHER)
INDEPENDENTLY SUPPORTED
C E L Y
15
16" HEAVY DUTY
T-GRID (BY OTHER)
N L 15 " H.D. T-GRID
16
MAIN (BY OTHER)
15 " H.D. T-GRID
16
MAIN (BY OTHER)
E N INDEPENDENTLY SUPPORTED
CUSTOMER PROVIDED FIXTURE
N SUSPENSION
EO
ACOUSTICAL BACKER 1 5/8"
E R E O (BY OTHER)
C
EF N
BLACK BACKER
PROJECT
N C E
TARA LARSON
R E E R
PAGE
FIELD CUT
FIELD APPLIED BACKER @ FIELD CUT
R R EF
FO EF E R
FIELD FINISHED END (STAINED/ FINISHED IN FIELD)
R
BACKER CLIP - 24" OC MAX BACKER CLIP - 24" OC MAX
R R TRIM PLATE
F O
FO
(2 PER BACKER TYPICAL) (2 PER BACKER TYPICAL) RECOMMENDED
(BY OTHER)
LOCATION
BACKER CLIP 1" N/A
BACKER CLIP
ARCHITECT
8 DIFFUSER DETAIL - PLAN VIEW 9 DIFFUSER DETAIL - SECTION VIEW 10 FIELD FINISHED END 11 CUSTOM EDGE DETAIL N/A
A4.0 SCALE: 1 1/2" = 1'-0" ARCH REF: N/A A4.0 SCALE: 1 1/2" = 1'-0" ARCH REF: N/A A4.0 SCALE: 3" = 1'-0" ARCH REF: N/A A4.0 SCALE: 3" = 1'-0" ARCH REF: N/A
CONTRACTOR
N/A
SUSPENSION (BY OTHER)
15
16" H.D. T-GRID CROSS TEE (BY OTHER) REPRESENTATIVE
WALL ANGLE SUSPENSION N/A
SUSPENSION (BY OTHER) (BY OTHER)
(BY OTHER)
15
16" H.D. T-GRID MAIN (BY OTHER)
ISOMETRIC
12" MAX 15
16"
H.D. T-GRID
15 " H.D. T-GRID MAIN (BY OTHER)
16
WALL ANGLE MAIN (BY OTHER)
(BY OTHER) ACOUSTICAL BACKER
DRAWING NORTH
RELEASES
DATE DESCRIPTION BY
8/26/19 INITIAL RELEASE TL
ELEVATION --- REVISION 1 ---
--- REVISION 2 ---
BACKER CLIP - 24" OC MAX 15 BLACK BACKER GRILLE RAIL (SOLID, LAMINATE,
(2 PER BACKER TYPICAL) VENEER, OR VINYL WRAPPED) --- REVISION 3 ---
A4.0 BACKER CLIP
1
2"
MIN. BACKER CLIP
REVEAL --- REVISION 4 ---
--- REVISION 5 ---
12 WOOD GRILLE 1 SECTION DETAIL 13 EDGE DETAIL 3 14 EDGE DETAIL 4 15 BACKER CLIP INVOICE
SHEET NUMBER
A4.0 SCALE: 3" = 1'-0" ARCH REF: N/A A4.0 SCALE: 3" = 1'-0" ARCH REF: N/A A4.0 SCALE: 3" = 1'-0" ARCH REF: N/A A4.0 SCALE: 1' = 1'-0" ARCH REF: N/A 12345
APPROVED BY
SUBMITTAL DATE
8/26/19
A4.0
Panel Schedule
Product Description QTY Length SQFT Hardware
Sheet Detail Width LNFT
Code Count
A1.0 1 A1 Grille with Backer Ceiling System; 43" x 3 43" Rails spaced 4" o.c. - 3 rails per foot; 21 12 71.75 126 N/A 126
123 Columbia Court North, Chaska,
Black Backer Rails - 12" o.c.; Wood Species: Solid Maple Minnesota 55318 P. 800.527.6253
A1.0 3 A2 Grille with Backer Ceiling System; 43" x 3 43" Rails spaced 4" o.c. - 3 rails per foot; 8 12 85.625 58 N/A 58
Black Backer Rails - 12" o.c.; Wood Species: Solid Maple
DO NOT SCALE DRAWING
A1.1 1 A3 Grille with Backer Ceiling System; x 3
4" 3 43"
Rails spaced 4" o.c. - 3 rails per foot; 9 12 114.3125 86 N/A 86 FIGURED DIMENSIONS ARE TO
Black Backer Rails - 12" o.c.; Wood Species: Solid Maple BE FOLLOWED.READ THIS
DRAWING IN CONNECTION WITH
A1.1 1 A4 Grille with Backer Ceiling System; 43" x 3 43" Rails spaced 4" o.c. - 3 rails per foot; 54 12 84.5625 380 N/A 380 GENERAL ARCHITECTURAL
Black Backer Rails - 12" o.c.; Wood Species: Solid Maple PLANS, STRUCTURAL PLANS,
AND OTHER RELATED
A1.2 1 A5 Grille with Backer Ceiling System; 43" x 3 43" Rails spaced 4" o.c. - 3 rails per foot; 36 12 118.125 354 N/A 354 DRAWINGS. THESE DRAWINGS
Black Backer Rails - 12" o.c.; Wood Species: Solid Maple R E P R E S E N T A S I ' S
UNDERSTANDING AND
A1.3 1 A6 Grille with Backer Ceiling System; 43" x 3 43" Rails spaced 4" o.c. - 3 rails per foot; 22 12 92.75 170 N/A 170 INTERPRETATION OF THE
Black Backer Rails - 12" o.c.; Wood Species: Solid Maple ARCHITECTURAL DRAWINGS
AND HOW ASI PRODUCTS
A1.3 1 A7 Grille with Backer Ceiling System; 43" x 3 43" Rails spaced 4" o.c. - 3 rails per foot; 15 12 114.125 142 N/A 142 RELATE TO THE PROJECT.
Black Backer Rails - 12" o.c.; Wood Species: Solid Maple COPYRIGHT ASI © 2019
A1.3 1 A8 Grille with Backer Ceiling System; 43" x 3 43" Rails spaced 4" o.c. - 3 rails per foot; 11 12 70.75 64 N/A 64 CONFIDENTIAL
Black Backer Rails - 12" o.c.; Wood Species: Solid Maple
NOT FOR PRODUCTION
*Note: Panel Quantities are Exact, Overage not Included Totals 176 1380 NOT FOR CONSTRUCTION
8/26/19
PROJECT
CLASS A VARNISH FIRE RETARDANT PANELS painted black) to the back of each panel rail to secure ends and prevent the individual rails from moving. If field cutting at an
If any panel or trim pieces appear to have manufacturing defects, do not install. ASI's only obligation is replacing materials proved
TARA LARSON
angle, please refer to the instructions on sheet 24 of the standard details.
PAGE
to be defective and that are returned for credit within the terms and conditions of the sale. Damaged material must remain Panels that are chemically treated for flame resistance, Class 1, 0-25 flame spread, may be slightly discolored or have a whitish
crated and in customer's possession until a decision on the claim is reached. At that time, the carrier responsible for the delivery cast. This may occur if the panels are subject to high humidity conditions. The manufacturer assumes no liability if this condition WALL INSTALLATION
will pick up the damaged product at the delivery site. Do not dispose of damaged product unless otherwise expressly instructed to occurs. Wood naturally varies in color and grain characteristics. It is recommended that panels be presorted before installation to assure
do so by an ASI representative. In the event this occurs, documented acknowledgment will be required from all parties involved. MOUNTING AND NRC a uniform final appearance. Lay out the wall to find a center line so that the cut panels or reveals will be equal on all sides unless
otherwise designed by the architect and/or shop drawings. Lay out the furring strips so that they run perpendicular to the rails
Most conventional woodworking techniques are acceptable for working with ASI panels. Special mounting techniques are LOCATION
If no damage is observed, verify that all materials ordered for the job have been received and are in the proper style(s) and (see sheets 13 & 18 in the standard details). Furring strips must align with the backer rails in the grille panels. Panels must be
required to install perforated acoustical panels including perforated Fusion, Microperf and Audition panels. In all of these cases N/A
correct quantities. attached to furring at a maximum of 24” O.C. Grilles are designed to be installed on furring of sufficient thickness to support the
the space behind the panel, including the insulation or acoustically absorptive materials, work in conjunction with the panel to
WARRANTY NOTICE panels. ASI recommends furring strips 16” or 24” on center (24” max).
provide the noise reduction performance anticipated. The architect's details and/or shop drawings must be followed to achieve
The above recommended installation instructions are reliable for most installations, but are not meant to imply any warranty or the look and NRC specified. Install the first panel by fastening directly to furring strips through the backer using black bugle head screws (make sure to drill
pilot holes as to not split the wood backer). Fasteners must have a minimum depth of 1” into the furring or framing member. ARCHITECT
guarantee for which ASI assumes responsibility. This warranty notice does not supersede ASI's Standard 1 Year Warranty. INSTALLATION N/A
Install remaining panels from one side of the wall to the other. Align all panel end joints, leaving a 1” reveal at all butted ends for
The installer must undertake testing and verification as to specific applications to determine suitability for them prior to Good wood working tools are needed to install wood panels. Care needs to be taken when cutting and fitting around windows, expansion and contraction. Continually check and adjust for panel module gain or loss while installing. Leave a 1/2" reveal at all
installation. The manufacturer's only obligation is to replace any material proven to be defective, rather than the installation or light switches and other fixtures. To achieve this, the following tools are recommended: edges and penetrations.
removal of the same, for a period of one year from the date of shipment. Faulty installation shall be corrected by the installing
· Trim Nailer When field cutting panels, do not leave panel rail ends unsupported if they are over 4" long. Prior to field cutting and installing
contractor. Beyond the purchase price of the materials supplied, the manufacturer assumes no liability for damages of any kind CONTRACTOR
and the user accepts the product “as is” without warranties expressed or implied. The suitability of the product for an intended · Table Saw panels - staple, nail, or screw loose backer rails (3/8”x7/8”- painted black) to the back of each panel rail to secure ends and N/A
use shall be solely up to the user. prevent the individual rails from moving. If field cutting at an angle, please refer to the instructions on sheet 24 of the standard
· Miter Saw details.
All wood and wood composite products sold by ASI are warranted to be free of defects in workmanship for a period of one year · Jig Saw
from the date of shipment, based on the following conditions: ACOUSTICAL BACKER INSTALLATION
· Router REPRESENTATIVE
Products with obvious flaws must be reported to ASI within 30 days of shipment to the customer. Wood products must me The following tools are recommended: N/A
acclimated to site conditions prior to installations per our acclimation instructions. After installation, the space must be · Biscuit Jointer
· Insul-knife
maintained within a relative humidity range of 25%-55%. Temperature range should be maintained within a range of 55-80 · Hole Saw
· BAC Blade
degrees Fahrenheit. The area must be enclosed; doors and windows installed, and the HVAC systems must be functioning · Iron
properly and in continuous operation. Any maintenance or cleaning of our products must be done in accordance with the · Utility knife
instructions found on our website. · Edge Band Trimmer DRAWING NORTH
· Utility knife blades
ASI warranties are subject to typical conditions. Unusual conditions include any type of accident or any form of abuse, adhesives · Standard Details pamphlet
· Sharp Sheers
or tape, standing water, excessive or moderate humidity, excessive or moderate temperatures, vibrations, or exposure to Blades and bits need to be sharpened, fine-tooth carbide. Jigsaw blades a medium tooth. RELEASES
chemicals or fumes. All products should be maintained to avoid dirt or dust buildup, which could provide a medium for microbial · Drywall square
growth. The growth of mold or mildew is not covered by this warranty nor is it the responsibility of ASI. Panels should be cut face up when cutting on the table saw and miter box. When cutting with a circular saw or up cut jig saw DATE DESCRIPTION BY
For ceiling installation, grid should be laid out in a 2x4 pattern. Acoustical backer is precut to fit within this pattern. At the
blade, cut face down. Blade teeth should always cut into the face of the veneer. All panels need to be handled as fine furniture 8/26/19 INITIAL RELEASE TL
Our wood products will have natural variations, due to the characteristics of the wood or veneers. This warranty does not cover perimeter, a sharp utility knife shears can be used. On large jobs an Insul- knife, or BAC cutting blade for a table saw will increase
would be handled. Padded material should be used to avoid scratching or marring the face of the panels. Pilot holes should --- ---
variations in texture, color, or grain. Appearances and colorings of wood products, stains and finishes can vary over time and as speed. REVISION 1
always be drilled. For example, to use a #8 screw, a pilot hole of 3/32” diameter should be used. Care needs to be taken not to
site conditions change and are therefore excluded from the warranty. --- REVISION 2 ---
overtighten screws or anchors. Overtightening will lessen the holding power of the screw and may damage the face of the panel. For wall installation, furring should be laid out 16" or 24” on center (24” max). The thickness of the acoustical backer (1” or 2”)
must not exceed the thickness of the furring. Furring strips are to be installed perpendicular to the panel direction. Once the --- REVISION 3 ---
All products must be installed in accordance with written ASI installations instructions and/or approved shop drawings. Any Penetrations in product (i.e. sprinklers, lighting, light switches, and outlets) should be cut with a jigsaw using a sharp blade and bit
lighting, ventilation, or other mounting parts must be suspended independently and supported securely by the substructure. furring is installed, secure the acoustical backer between the furring strips, to the substrate behind the furring strips. --- REVISION 4 ---
or a sharp hole saw (see sheets 7-12 of the standard details). Test cuts should be made on scrap panels to determine the proper
--- REVISION 5 ---
ASI shall have no responsibility for defective processing or alteration to the products by others after shipment. This warranty is
limited to materials defects only. ASI reserves the right to repair or replace at our discretion. INVOICE
SHEET NUMBER
12345
APPROVED BY
SUBMITTAL DATE
8/26/19
A6.0