Yoki the Fat Dragon
Pattern & Tutorial
PE SRI
coc
err)
ed
Sin)
Pernt
aod
Poa ecRED)Tutorial Yoki th
1a, Take 2 pieces of green fabric and draw the arms on the
backside of the fabric. With the right sides of the fabric together
sew the arms.
‘1b. Cut the arms out of the fabric and turn them right side out
Stuff them with stuffing and handsew the hole to close it.
e fat dragon
Dark green fleece: 50 x 50 em (20 x 20 inch)
Light green fleece: 40 x 40 em (16 x 16 inch)
Green felt: 30 x 10 em (12x 4 inch)
Batting: 30 x 20 em ( 12x 8 inch)
Glasseyes: 6mm
Green embroidery thread
=| | Ex
2a. Draw the pattern of the wings on the back of the light and dark green fabric. Draw one normal and one
mirrored. Cut the wings out of the fabric with 1 cm / 0.4 inch seam allowance. 2b. Put
bottom of the stack to make the wing stronger. Sew the 3 layers of fabric,
wing right side out. 2c. Then sew the lines on like on the picture. Hand sew
cae
Wing
Want
OO
as
3d
1e piece of batting on the
‘trim the seam allowance and turn the
e hole to close it up.
3a. Draw the pattern of the head on the back of the dark.
jen fabric and cut them out with 1 em / 0.4 inch seam
‘allowance.
3b. Pin and sew the Head top around a Head side . Begin
at the back of the head.
4c. Do the same for the other side of the head.
3c. Trim the seamallowance and turn the head right side
‘out. Put the glass eyes on the head. If you don’t have glass
‘eyes you can use black beads or two small felt circles. Stuff
the head.
3d. Sew the nostrils on by hand. Make the ears the same
way as you made the arms, but don’t stuff them. Fold the
‘ears a bit before you put them into the back of the head.
Sew le up with the ears insi
e =
&®each side of the Body
ofthe fabric togethe
Se is a bit difficult. Sewing by hand might be
the easiest way fo do this.
60. Put the right sides of the bel
pieces together, pin and sew the
middle.
6b, Put lt on the body as on the
picture(right sides togher), pin and
‘Sew. Do the same for the tail. Trim
the seamallowance. Sew the Tail
bottom and belly together
‘Turn the dragon right side out and
stuff him. Start with the tail and feet.
‘could use
body. Cut
‘Sew on th
threads through
use the nes
lly
jedle. Take a piece of thr:
anormal knot 100,
it off on the other side.
lery thread and a long
1d and stick it through
the body. Use a slip knot to push the fabric in « bit. You
ut | prefer using slipknots
first and making them final when | have put all
body. When you have your final knots
le again to put the loose thread through the
ings, head and arms and your dragon is.
done! Hope you enjoyed making him!
4, Draw the body pieces on the back side of the fabric
and cut them out with a seam allowance of 1 em. 0.4
inch.
&
5a, But the body back pieces on top of each
other with the
t sides together. Put the felt
blades in between. Pin and sew the back and top
of the tail (ike on the picture).
5b. Now take the leg parts and sew a leg on
‘Back. With the right sidesDragon pattern 1/2
(4194) [OL 404 sepoig
Head top
(1193) 190g 405 sepojig
FeetDragon pattern 2/2
Head side
-e1ajdui0> 04 dos uo z 44g 9120g Apog Ing
OOo
Body Back Part 1
Z pg 920g Apog OO
WwoHog [1DDragon pattern SEAM ALLOWANCE 1/4
Dragon with seamallowance included, fr those who prefer the
patern with seamallonance
Presse note Tutorial uses the pattern without samallowance.
NoseDragon pattern SEAM ALLOWANCE 2/4
Dragon with seamallowance include fr thoce who prefer the
patter with seamallowance
Please noe: Tate uses the pattern without seamallowance
Body Back Part 1
Put Body Back Part 2 on top te complete.
OODragon pattern
SEAM ALLOWANCE 3/4
Dragon serewance nde fo those who peferthe
pattern wth samalowance
Please nate Tutaraluss the partem without seamallance,
OO
Z Dg »pPg Apog
Blades for Tail (felt)
Blades for Back (felt)Dragon pattern SEAM ALLOWANCE 4/4
Dragon wth seamallowance inchided, fr those who prefer the
pattern with seamallonance
Please note: Turi uses the pattern without seamallowance.
=
ag
2
e