Professional Documents
Culture Documents
Product Catalogue
Wilo–Rexa Series
Solution for Submersible Drainage, Sewage & Industrial Applications
“Top quality in
standard applications”
3
Wastewater collection and transport, Wastewater collection and transport, Wastewater collection and transport.
dewatering/flood control. dewatering/flood control.
Pump Housing : grey cast iron Pump Housing : copolymer (PP-GF30) Pump Housing : cast iron
Impeller : composite Impeller : copolymer (PP-GF30) Impeller : cast iron
Motor Housing : stainless steel Motor Housing : stainless steel Motor Housing : stainless steel /
Seal : SiC/SiC Seal : SiC/SiC cast iron
Static Seal : NBR Static Seal : NBR Seal : SiC/SiC
Static Seal : NBR
→ High efficiency and operational → Excellent reliability due to corrosion- → Especially reliable due to ATEX
reliability free hydraulics for universal approval and longitudinally
→ Easy installation – even in narrow application and various fluids watertight cable inlet (CUT GE…)
drainage pits, compact design with → Easy installation thanks to its light → Excellent operational reliability due
integrated condenser and threaded weight, integrated capacitor at the to spherically formed macerator
flange single-phase motor and flange with with pulling cut
→ Reliable use in a variety of drainage integrated fixation → Long service life through a high-
applications thanks to the corrosion- → Optimum efficiency and operational quality motor seal with two
free impeller and sealed cable inlet safety thanks to its vortex hydraulics independent mechanical seals and
→ Longer maintenance intervals thanks and smooth surfaces optional pencil electrode for sealing
to the high-volume sealing chamber → Quick maintenance facilitated by chamber control
and double seal direct access to the sealing chamber
→ Quick maintenance facilitated by and pump housing
direct access to the sealing chamber → Long maintenance interval thanks to
and pump housing its double seal
SewagePump
NFPA20 and Drainage
Design Pumps
Wastewater collection and transport, Wastewater collection and transport, Wastewater collection and transport,
wastewater treatment, dewatering. wastewater treatment, dewatering. wastewater treatment, dewatering.
→ Mains connection: 1~230 V, 50 Hz or → Mains connection: 1~230 V, 50 Hz or → Mains connection: 3~400 V, 50 Hz
3~400 V, 50 Hz 3~400 V, 50 Hz → Protection class: IP68
→ Protection class: IP68 → Protection class: IP68 → Insulation class: H
→ Insulation class: F → Insulation class: F, optionally H → Fluid temperature: 3…40 °C, higher
→ Fluid temperature: 3 – 40 °C, max. 60 → Fluid temperature: 3…40 °C, max. 60 temperatures on request
°C for 3 min °C for 3 min → Free ball passage of 45...130 mm
→ Free passage: 50 / 65 / 80 mm → Max. immersion depth: 20 m → Max. immersion depth: 20 m
→ Cable length: 10 m → Cable length: 10 m
Pump Housing : cast iron Pump Housing : cast iron Pump Housing : cast iron
Impeller : cast iron Impeller : cast iron / ductile Impeller : cast iron
Motor Housing : stainless steel cast iron Motor Housing : cast iron / ductile
Seal : SiC/SiC Motor Housing : cast iron cast iron
Static Seal : NBR Seal : SiC/SiC Seal : SiC/SiC
Static Seal : NBR Static Seal : NBR / FPM
→ Ready-to-plug and immediately → Highly efficient thanks to efficiency- → Increased operational reliability and
ready to go (A and P version) optimised, single-channel impellers reduced servicing costs due to free
→ Attached float switch (A-model) → Reliable operation due to clogging-free flowing hydraulics that are non
enables easy operation vortex impellers. susceptible to clogging and have a
→ Safe vortex hydraulics with large, → Tested safety. Ex-rated in accordance large free ball passage
free ball passage to prevent clogging with ATEX as standard → Low operating costs thanks to
during operation → Energy-efficient IE3 motor technology superior hydraulic efficiency (up to
→ Sealing chamber with optional available as an option 60.7 %) and optional IE3 motor
external monitoring technology (based on IEC 60034-
→ Lightweight 30-1)
→ Customer-specific versions for
system-specific solutions
→ Long service life in abrasive and
corrosive fluids thanks to Ceram
coatings
“Maximum operational reliability and reduced service costs, especially for pumping untreated sewage,
thanks to self-cleaning properties.”
Material Construction
→ Housing components: EN-GJL-250 or EN-GJS-
500-7
Technical Information → Impeller: EN-GJL-250 or EN-GJS-500-7
→ Static gaskets: FPM
→ Mains connection: 3~400 V, 50 Hz → Sealing on pump side: SiC/SiC
→ Submerged operating mode: S1 → Sealing on motor side: FPM, carbon/ceramic or
→ Non-immersed operating mode: S1 (FK, FKT, HC SiC/SiC
motor) or S2 (T motor, depending on performance) → Shaft: Stainless steel 1.4021
→ Protection class: IP68
→ Fluid temperature: 3 - 40 °C, higher temperatures
on request
→ Free ball passage:
→ T impeller: 78x105…150x150 mm
→ G impeller: 80 or 90 mm
→ Q impeller: 78 mm
→ Max. immersion depth: 20 m