Professional Documents
Culture Documents
مناهج جامعة السودان العالميه
مناهج جامعة السودان العالميه
1
وضع عضى هيئخ
الجراهج األخري
التذريس التخصص التخصص الوؤهل
ثبلكليخ التي الرتجخ العلويخ اإلسن الرلن
تعبلذ الذليك العبم العلوي
يشبرن فيهب هتفرغ هتعبوى
جزئي
أ.آالء ػٛع أؽّل
√ ٕ٘لٍخ ِلٔ١خ ِؾبػو ِبعَز١و 21
ِؾّن ػٍٟ
ٕ٘لٍخ أ .إٕ٠بً ػجلهللا أؽّل
√ ِؾبػو ِبعَز١و 22
إٌىزو١ٔٚخ اٌؾبط
أ .آ٠بد ٌٔٛ٠اٌشو٠ف
√ ٕ٘لٍخ اٌملهح ِؾبػو ِبعَز١و 23
اٌؾَٓ
√ ٕ٘لٍخ اٌؼّبهح ِؾبػو ِبعَز١و أ .شّ١بء ػجلهللا إثواُ٘١ 24
√ ٕ٘لٍخ اٌؼّبهح ِؾبػو ِبعَز١و أ ٍٍّٝ .ثبثىو ػجلاٌغٕٟ 25
√ ٕ٘لٍخ ِلٔ١خ أِ.شبهن كوزٛهاح ك .ػجلاٌوؽ ُ١دمحم اٌؾَٓ 26
ٕ٘لٍخ
√ أِ.شبهن كوزٛهاح ك .ػضّبْ ػٍ ٟؽَٓ 27
إٌىزو١ٔٚخ
ٕ٘لٍخ
√ أِ.شبهن كوزٛهاح كِ .ظطف ٝاٌؼطب 28
ِ١ىبٔ١ىٗ١
ٕ٘لٍخ ك .أثٛإٌٛه ػبثلٓ٠
√ أَِ.بػل كوزٛهاح 29
ِ١ىبٔ١ىٗ١ أثٛإٌٛه
√ ٕ٘لٍخ ؽجٗ١ أَِ.بػل كوزٛهاح ك .اٌ١بً طل٠ك دمحم 31
√ ٕ٘لٍخ اٌج١ئٗ ِؾبػو ِبعَز١و أ .دمحم ػجلهللا دمحم ػجبً 31
√ ٕ٘لٍخ اٌؼّبهح ِؾبػو ِبعَز١و أ .ػلالْ اٌظل٠ك 32
√ ٕ٘لٍخ اٌؼّبهح ِؾبػو ِبعَز١و أ .كاٌ١ب ػجلهللا اٌؾَٓ 33
√ ٕ٘لٍخ اٌؼّبهح ِؾبػو ِبعَز١و أ .ر١َ١و ػٛع اٌىوُ٠ 34
َِبػل
√ ٕ٘لٍخ ؽج١خ ثىبٌٛهًٛ٠ أٍ .ؾو هؽّخ هللا عبكٓ٠ 35
رلهٌ٠
ٕ٘لٍخ َِبػل أِ .و ٖٚاٌؾَٓ١
√ ثىبٌٛهًٛ٠ 36
إٌىزو١ٔٚخ رلهٌ٠ ػجلاٌمبكه
ٕ٘لٍخ َِبػل أٔ .ؼّٗ ى ٓ٠اٌؼبثلٓ٠
√ ثىبٌٛهًٛ٠ 37
إٌىزو١ٔٚخ رلهٌ٠ ػجلاٌؾٟ
َِبػل أٚ .ائً ِزٛوً إكهٌ٠
√ ٕ٘لٍخ اٌزؾىُ ثىبٌٛهًٛ٠ 38
رلهٌ٠ أؽّل
َِبػل أ .أثٛاٌؾَٓ ؽَٓ١
√ ٕ٘لٍخ اٌملهح ثىبٌٛهًٛ٠ 39
رلهٌ٠ أثٛاٌؾَٓ
ٕ٘لٍخ َِبػل
√ ثىبٌٛهًٛ٠ أ .فٛاى فزؾ ٟؽٗ دمحم 41
إرظبالد رلهٌ٠
َِبػل
√ ٕ٘لٍخ ِلٔٗ١ ثىبٌٛهًٛ٠ أ .رٙبٔ ٟدمحم أِ ٓ١ىث١و 41
رلهٌ٠
َِبػل أٔ .ؼبي ػجلاٌؼبي
√ ٕ٘لٍخ ِلٔٗ١ ثىبٌٛهًٛ٠ 42
رلهٌ٠ ػجلهللا
َِبػل
√ ٕ٘لٍخ ِلٔٗ١ ثىبٌٛهًٛ٠ أٚ .فبق دمحم دمحم 43
رلهٌ٠
َِبػل
√ ٕ٘لٍخ ِلٔٗ١ ثىبٌٛهًٛ٠ أ .دمحم آكَ ِؾىو 44
رلهٌ٠
2
وضع عضى هيئخ
الجراهج األخري
التذريس التخصص التخصص الوؤهل
ثبلكليخ التي الرتجخ العلويخ اإلسن الرلن
تعبلذ الذليك العبم العلوي
يشبرن فيهب هتفرغ هتعبوى
جزئي
َِبػل
√ ٕ٘لٍخ ِلٔٗ١ ثىبٌٛهًٛ٠ أِ ِٟ .ظطف ٝأِٓ١ 45
رلهٌ٠
َِبػل
√ ٕ٘لٍخ ِلٔٗ١ ثىبٌٛهًٛ٠ أ .ػي٠يٖ ٘شبَ كاٚٚك 46
رلهٌ٠
َِبػل
√ ٕ٘لٍخ اٌؼّبهح ثىبٌٛهًٛ٠ أ .كػل فزؼ اٌوؽّٓ ٌ٠ 47
رلهٌ٠
√ ٕ٘لٍخ ِلٔ١خ أٍزبم َِبػل كوزٛهاح ك دمحم ف١و ٜفم١و 48
√ ف١ي٠بء ِؾبػو ِبعَز١و أ .ػٛع آ١ِ٤ 49
√ ف١ي٠بء ِؾبػو ِبعَز١و أ .ػي٠يٖ ِجبهن 51
√ ف١ي٠بء ِؾبػو ِبعَز١و أ .ثله ٗ٠ؽج١ت هللا 51
√ ف١ي٠بء ِؾبػو ِبعَز١و أٚ .الء ػجلاٌّغ١ل 52
َِبػل
√ ف١ي٠بء ثىبٌٛهًٛ٠ أٍ .بِ ٗ١أؽّل 53
رلهٌ٠
َِبػل
√ ف١ي٠بء ثىبٌٛهًٛ٠ أ .هٔبك اٌظبكق 54
رلهٌ٠
َِبػل
√ ف١ي٠بء ثىبٌٛهًٛ٠ أ .هشب عؼفو 55
رلهٌ٠
َِبػل
√ ف١ي٠بء ثىبٌٛهًٛ٠ أِ .ؼبم ػّو 56
رلهٌ٠
َِبػل
√ ف١ي٠بء ثىبٌٛهًٛ٠ أ .آالء طالػ أؽّل 57
رلهٌ٠
√ و١ّ١بء ػبِخ أَِ.بػل كوزٛهاح ك ػبكي اٌؾبط 58
كٔ .ياه ػجلاٌؼي٠ي
√ و١ّ١بء ػبِخ أَِ.بػل كوزٛهاح 59
إٌظوٞ
√ و١ّ١بء ػبِخ ِؾبػو ِبعَز١و اٌّؼي ٍٛ٠ف ؽّبك 61
َِبػل أ .آ٠بد أؽّل ِقزبه
√ و١ّ١بء ثىبٌٛهًٛ٠ 61
رلهٌ٠ آ١ِ٤
َِبػل أ .إّ٠بْ أؽّل آكَ
√ و١ّ١بء ثىبٌٛهًٛ٠ 62
رلهٌ٠ إكهٌ٠
َِبػل أِ .ؾ ٟاٌل ٓ٠آكَ
√ و١ّ١بء ثىبٌٛهًٛ٠ 63
رلهٌ٠ ٘بهْٚ
√ ٌغخ ػوث١خ أَِ.بػل كوزٛهاح فبٌل اٌَبٌِٝٛ 64
√ ٌغخ ػوث١خ ِؾبػو ِبعَز١و أ .رٛف١ك ثبثىو 65
ػٍ َٛؽبٍٛة
√ ٕ٘ +لٍخ أَِ.بػل ِبعَز١و أ .دمحم ػضّبْ اٌط١ت 66
وٙوثبئ١خ
√ ػٍ َٛؽبٍٛة ِؾبػو ِبعَز١و أ٘ .ل ٜاثٕؼٛف 67
√ ػٍ َٛؽبٍٛة ِؾبػو ِبعَز١و أ .آ٠بد ػجلاٌوؽّٓ 68
3
وضع عضى هيئخ
الجراهج األخري
التذريس التخصص التخصص الوؤهل
ثبلكليخ التي الرتجخ العلويخ اإلسن الرلن
تعبلذ الذليك العبم العلوي
يشبرن فيهب هتفرغ هتعبوى
جزئي
√ ػٍ َٛؽبٍٛة ِؾبػو ِبعَز١و أ .ػجلهللا إثواُ٘١ 69
√ ػٍ َٛؽبٍٛة ِؾبػو ِبعَز١و أ .شّ١بء ػجلاٌمبكه 71
َِبػل
√ ػٍ َٛؽبٍٛة ثىبٌٛهًٛ٠ أ .ػضّبْ دمحم ؽٍؼذ فو٠ل 71
رلهٌ٠
َِبػل
√ ػٍ َٛؽبٍٛة ثىبٌٛهًٛ٠ أِ .و ٖٚػجلاٌغًٍ١ 72
رلهٌ٠
َِبػل
√ ػٍ َٛؽبٍٛة ثىبٌٛهًٛ٠ أ .إؽَبْ 73
رلهٌ٠
√ ه٠بػ١بد ِؾبػو ِبعَز١و أ .دمحم ػضّبْ دمحم 74
√ ه٠بػ١بد ِؾبػو ِبعَز١و أِ .بعلِ ٓ١ٌٚؼٞٛ 75
√ ه٠بػ١بد ِؾبػو ِبعَز١و أ .ه٠بْ دمحم ٍو اٌٍقزُ 76
√ ه٠بػ١بد ِؾبػو ِبعَز١و أِٙ .بك ِؾّٛك ثىوٞ 77
َِبػل
√ ه٠بػ١بد ِبعَز١و أ .إِٔ ٗ١ؽَٓ١ 78
رلهٌ٠
َِبػل
√ ه٠بػ١بد ثىبٌٛهًٛ٠ أٍ .ؾو ػّبك 79
رلهٌ٠
َِبػل
√ ه٠بػ١بد ثىبٌٛهًٛ٠ أ .إّ٠بْ فٍف هللا دمحم 81
رلهٌ٠
َِبػل
√ ه٠بػ١بد ثىبٌٛهًٛ٠ أ .ػبئشٗ دمحم ٚهٍّٟ 81
رلهٌ٠
َِبػل
√ ه٠بػ١بد ِبعَز١و أ .طفبء دمحم 82
رلهٌ٠
ػجل اٌّؾّٛك ثق١ذ
√ ٌغخ إٔغٍ١ي٠خ ِؾبػو ِبعَز١و 83
ِؾغٛة
√ ٌغخ إٔغٍ١ي٠خ ِؾبػو ِبعَز١و ػٍ ٝػجلهللا اٌط١ت 84
√ روث١خ إٍالِ١خ ِؾبػو ِبعَز١و ثىو ٜػجلهللا أِبْ 85
استوبرح الوعبهل
نوع المعمل
مالحظات أخرى مشترك مع البرامج مخصص السعة اسم المعمل الرقم
األخرى للبرنامج
مشترك مع برامج
موجود و ٌحوي عدد كافً من األجهزة 81 الفٌزٌاء 1
الهندسة
4
مشترك مع كلٌة
موجود و ٌحوي عدد كافً من األجهزة 64 الكٌمٌاء 2
الصٌدلة
مشترك مع برامج
موجود و ٌحوي عدد كافً من األجهزة 81 أساسٌات هندسة كهربائٌة 3
الهندسة
مشترك مع برامج االلكترونٌات التماثلٌة و
موجود و ٌحوي عدد كافً من األجهزة 81 4
الهندسة الرقمٌة
موجود و ٌحوي عدد كافً من األجهزة 64 التحكم و القٌاسات 5
المعالجات و المتحكمات
موجود و ٌحوي عدد كافً من األجهزة 64 6
الدقٌقة
موجود و ٌحوي عدد من األجهزة ،و ٌحتاج الماكٌنات و القدرة
64 7
إلى بعض األجهزة اإلضافٌة الكهربائٌة
موجود و ٌحوي عدد كافً من األجهزة 81 معمل الخالٌا الشمسٌة 8
ٌجهز الحقا 81 االتصاالت
مشترك مع برامج
35 الحاسوب و الشبكات 1 9
الهندسة
مشترك مع برامج
39 الحاسوب و الشبكات 2 11
الهندسة
مشترك مع برامج
51 الحاسوب و الشبكات 3 11
الهندسة
استوبرح التمٌييي
الجراهج األخري وضع التمٌييي
ثبلكليخ التي يشبرن تعبلذ التخصص الوؤهل العلوي اإلسن الرلن
هتفرغ هتعبوى
فيهب جزئي
√ للهح وٙوثبئ١خ ثىبٌٛهًٛ٠ ٍٍٍّٛ٠ ٝف دمحم 1
√ للهح وٙوثبئ١خ ثىبٌٛهًٛ٠ دمحم عّبي ػضّبْ 2
√ ٕ٘لٍخ ٌىزو١ٔٚخ ثىبٌٛهًٛ٠ إٍواء دمحم إثواُ٘١ 3
ِالىَ ِؼًّ √ وٙوثبء كثٍَٛ ػبِو دمحم إثواُ٘١ 4
ِالىَ ِؼًّ √ إٌىزو١ٔٚبد كثٍَٛ ؽٛاء دمحم أثىو 5
ِالىَ ِؼًّ √ إرظبالد كثٍَٛ دمحم ػضّبْ اٌؾَٓ 6
√ ٕ٘لٍخ ؽبٍٛة كثٍٕ٘ َٛلٍخ دمحم ٍٍّ١بْ 7
√ ٕ٘لٍخ ؽبٍٛة كثٍٕ٘ َٛلٍخ ػجلهللا اٌطب٘و دمحم 8
√ رمبٔخ ِؼٍِٛبد ثىبٌٛهًٛ٠ ٚػبػ ػياٌلٓ٠ 9
فلِٗ ٚؽٕٗ١ رمبٔخ ِؼٍِٛبد ثىبٌٛهًٛ٠ اٌشؼوا ٞٚآكَ ثشبهٖ 11
√ ف١ي٠بء كثٍَٛ أ .أه٠ظ ِظطفٝ 11
√ و١ّ١بء ثىبٌٛهًٛ٠ أٔ .غالء ٔج ً١أثٛاٌّغل 12
5
استوبرح االجهزح
هل مخصص
للبرنامج أم ال يعمل يعمل العدد اسم الجهاز الرقم
مشترك
Logic circuit training kit. P.N.: DICE-
SEM.
مشترك √ 10 1
Complete with accessories, documentation
and experiment manual.
Digital circuit training kit. P.N.: DICE-
D8-2.
مشترك √ 10 2
Complete with accessories, documentation
and experiment manual.
Analog circuit training kit. P.N.: DICE-
A9.
مشترك √ 10 3
Complete with accessories, documentation
and experiment manual.
PIC innovative experiment development
kit. P.N.: PIC200.
مشترك √ 10 4
Complete with accessories, documentation
and experiment manual.
EDA/SOPC innovative training kit. P.N.:
DICE-E213.
مشترك √ 10 5
Complete with accessories, documentation
and experiment manual.
Typical sensor training kit. P.N.: DICE-
CG3.
مشترك √ 10 6
Complete with accessories, documentation
and experiment manual.
Comprehensive electronic training kit.
P.N.: DICE-KM4.
مشترك √ 10 7
Complete with accessories, documentation
and experiment manual.
Solar teaching experiment kit. P.N.:
DICE-SP
مشترك √ 01 8
Complete with accessories, documentation
and experiment manual.
Electrician skills and technology training
مشترك √ 5 9
device. P.N.: GTET-1001.
مشترك √ 5 Electric drive and automation technology 11
6
هل مخصص
للبرنامج أم ال يعمل يعمل العدد اسم الجهاز الرقم
مشترك
training and assessment device. P.N.:
GTET-1002.
Electronic technology experimental device.
مشترك √ 5 11
PN: GTET-1003.
Electrical measurement training device.
مشترك √ 5 12
PN: GTET-1004.
Electrical safety training device. P.N.:
مشترك √ 5 13
GTET-1005.
Electrical and electronic skills assessment
مشترك √ 5 14
training device. P.N.: GTET-1006.
Primary electrical lighting skills
مشترك √ 5 assessment training device. P.N.: GTET- 15
1007.
Primary electrical skills assessment
مشترك √ 5 16
training device. P.N.: GTET-1008.
Intermediate electrician skill assessment
مشترك √ 5 training device (middle rank). P.N: 17
GTET-1009.
Senior electrician skills assessment training
مشترك √ 5 18
device. P.N: GTET-1010.
General electrical and electronic
مشترك √ 5 technology experiment device. P.N: 19
GTET-1011
مشترك √ 10 Oscilloscope 21
مشترك √ 10 Dual power supply 21
مشترك √ 10 Function generator 22
مشترك √ 12 DC power supply 23
مشترك √ 10 Digital multimeter 24
مشترك √ 10 Inductor decade box 25
مشترك √ 10 Resistor decade box 26
مشترك √ 10 Capacitor decade box 27
مشترك √ 10 BNC Connector 28
Resistors 33k, 39k 47k, 68E, 100K, 1K,
مشترك √ 15 each 1.5K, 5.6K, 10K, 470E, 1K, 10K, 10K, 29
33K, 120K, 240K, 680E, 2.2K
Capacitors 10uf, 0.01uf, 0.1uf, 1nf, 220,pf,
مشترك √ 15 each 31
100nf, 10nf, 1.5uf, 1uf, 750pf
مشترك √ 15 each Diode oa79, in4148, zener (3.4v, 6.2v) 31
7
هل مخصص
للبرنامج أم ال يعمل يعمل العدد اسم الجهاز الرقم
مشترك
مشترك √ 15 each Potentiometers 100k 10k 32
مشترك √ 15 CA3080 Ics 33
مشترك √ 15 NE /SE566D Ics 34
مشترك √ 15 Audio Transformer (Small Signal) 35
مشترك √ 15 Coils 0.1mh, 0.01mh 36
مشترك √ 15 Potentiometer 100k 10k 37
مشترك √ 15 each Transistor J176, 2n3904 ,BC107 38
مشترك √ 10 LM358 Ics 39
مشترك √ 10 556 Ics 41
مشترك √ 15 LM741 Ics 41
مشترك √ 32 Connection boards 42
مشترك √ 25 AND gate Ics 43
مشترك √ 25 OR gate Ics 44
مشترك √ 25 NOT gate Ics 45
مشترك √ 25 XOR gate Ics 46
مشترك √ 25 Decoder Ics 47
مشترك √ 25 Multiplexor Ics 48
مشترك √ 25 NOR gate Ics 49
مشترك √ 25 NAND gate Ics 51
مشترك √ 45 JK Flip Flop Ics 51
مشترك √ 45 T Flip Flop Ics 52
مشترك √ 45 D Flip Flop Ics 53
مشترك √ 45 LEDs 54
مشترك √ 100 Resistors 55
مشترك √ 15 7segmunt display 56
مشترك √ 10 Optical bench 57
مشترك √ 10 Light source 58
مشترك √ 10 Convex lens 59
مشترك √ 10 Concave mirrors 61
مشترك √ 10 Prisms 61
مشترك √ 10 Weights (20-50-100 grams) 62
مشترك √ 10 Hooks apparatus 63
مشترك √ 10 Cylindrical tubes 64
مشترك √ 10 Metric rulers 65
مشترك √ 10 Travelling microscope 66
مشترك √ 10 AC-AD power supply 67
8
هل مخصص
للبرنامج أم ال يعمل يعمل العدد اسم الجهاز الرقم
مشترك
مشترك √ 10 Resistor box 68
مشترك √ 10 Rheostat 89 Ohms 69
مشترك √ 5 Heaters 71
مشترك √ 10 Connecting cables 71
مشترك √ 20 Micrometer gauge 72
مشترك √ 20 Verneir caliper 73
مشترك √ 20 Spherometer 74
مشترك √ 10 Metric bridge 75
مشترك √ 10 Glass block 76
مشترك √ 10 Capacitor box 77
مشترك √ 10 Coil 500 Turns 78
مشترك √ 20 Glass beakers 79
مشترك √ 10 Spiral spring 81
مشترك √ 10 DC ammeters 0-15-30 A 81
مشترك √ 10 DC voltmeters 0-15-30 v 82
مشترك √ 10 Cu + al beakers 83
مشترك √ 10 Galvanometers 84
مشترك √ 20 Thermometer 0-100c-0-300c 85
مشترك √ 5 Boyles low Apparatus 86
مشترك √ 10 Piece of glass plate 87
مشترك √ 10 Piece of glass plate 88
مشترك √ 10 Key 89
مشترك √ 10 Ball – (simple pendulum ) 91
مشترك √ 10 Stand 91
مشترك √ 10 Clamp 92
مشترك √ 10 AVO meter 93
مشترك √ 10 Copper calorimeter (big ) 94
مشترك √ 10 Copper calorimeter (small) 95
9
استوبرح المبعبد
وجود جهاز
مالحظات مخصص
وسائط مشترك السعة اسم القاعة الرقم
أخرى للبرنامج
متعددة
√ 108 E1 1
10
وجود جهاز
مالحظات مخصص
وسائط مشترك السعة اسم القاعة الرقم
أخرى للبرنامج
متعددة
61 القاعة 31 18
استوبرح الوكتجخ
11
:ارفبق لبئوخ ثبلكتت الورجعيخ والوٌهجيخ الخبصخ ثبلجرًبهج وفك االتي
سنة
العدد دار النشر اسم المؤلف اسم المرجع الرقم
النشر
Digital electronics-A
3 2118 Prentice hall Kleitz
practical approach 1
Grob,s basic
electronics-
3 2117 McGraw-Hill Schultz
fundamentals of 2
DC&A Circuits
Morgan Anant
Foundations of Analog
Kaufmann Agarwal ,
1 2115
Publishers/ Jeffrey H.
and Digital Electronic 3
Circuits
Elsevier Lang
Oxford A.S. Sedra
Microelectronic
1 2119 University and K.C.
Circuits 4
Press Smith
Fundamentals of
3 2112 oxford Bhooshan
electromagnetic 5
Digital electronics-
3 2118 McGraw-Hill Tokheim principles 6
&applications
Material Science for
1 2011 CBS Gupta
Engineers 7
Microelectronic circuit
2 2118 McGraw-Hill Jaeger
design 8
Principles of Electric
1 2007 Prentice hall Floyd
Circuits 9
Introductory electronic
2 2117 Prentice hall Paynter
devices and circuits 11
Introduction to aircraft
1 2007 Cambridge John p.fiedng
design 11
Ron Larson,
Cengage
1 2119
Learning
Bruce H. Calculus 12
Edwards
Addison- Modern Engineering
1 2111
Wesley
G James
Mathematics 13
R Burden and
1 2111 Brooks/Cole
J Faires
Numerical Analysis 14
12
سنة
العدد دار النشر اسم المؤلف اسم المرجع الرقم
النشر
Cambridge
Alan F.
1 2115 University
Beardon
Algebra and Geometry 15
Press
McGraw-Hill
Higher Kenneth H Discrete Mathematics
1 2116
Education; Rosen and its Applications 16
METRC
Seymour
Schaum's Outline of
1 2119 McGraw Hill Lipschutz,
Discrete Mathematics 17
Marc Lipson
Statistics without
Penguin Derek Tears: An Introduction
1 2111
Science Rowntree for Non- 18
Mathematicians
Edward
1 1995
Arnold
JH McColl Probability 19
Introduction to
Yale Patt, Computing Systems:
1 2113 McGraw-Hill
Sanjay Patel From bits & gates to C 21
& beyond
Darrell
Cengage Ebbing ,
1 2119
Learning Steven D.
General Chemistry 21
Gammon
Object-Oriented
1 2111 SAMS Robert Lafore
Programming in C++ 22
Addison- Douglas C. Physics for Scientists
1 2118
Wesley Giancoli and Engineers 23
Ishraga
SIU Intermediate English
1 2112
Publications
Bashir, Ali
Course 26
Altaaishy
Ishraga
SIU Intermediate English
1 2112
Publications
Bashir, Ali
Course 27
Altaaishy
Faber Ltd., S.Lloyd, History of World
1 2114
London H.W.Muller Architecture - Series 28
Drawing Geometry: A
Keith
Primer of Basic Forms
1 2117 Floris Books Critchlow,
for Artists, Designers 29
Jon Allen
and Architects
John Wiley & Francis D. K.
1 2119
Sons Ching
Architectural Graphics 31
Architectural Architect's Pocket
1 2111
Press
Ann Ross
Book 31
1 2111 Butterworth- Roy Chudley Building Construction 32
13
سنة
العدد دار النشر اسم المؤلف اسم المرجع الرقم
النشر
Heinemann , Roger Handbook
Greeno
John Wiley & Francis D. K. Building Construction
1 2118
Sons Ching Illustrated 33
William
W. W. Norton Design Drawing
1 2111
& Co
Kirby
Experiences 34
Lockard
Nikos A The Theory of
1 2117 Umbau Verlag
Salingaros Architecture 35
British Library
Taloguing in Edward Planning - The
1 1985
Publication D.Mills. Architects Handbook 36
Data
Tahmes and
Kenneth Modern Architecture:
1 2117 Hudson,
Frampton A Critical History 37
London
251 1 كافتٌرٌات 1
1 عٌاده طبٌه 2
72 الحمامات 3
111 2 المسجد 4
6 المٌادٌن 5
2 االستراحات 6
12 مبردات المٌاه 7
312 39 مظالت بكراسً و 8
14
طالب8 طاوالت سعة
لكل منها
15
April 2016
16
Table of contents
Page
SN Item
No.
1 Introduction 3
2 Program objectives 3
3 Duration & Pattern of Course 3
4 Degree Awarded 3
5 Program Outcomes 4
6 Degree Requirements 4
7 Subjects Codes 5
8 Coding Scheme 5
9 Statistical information 6
10 General analysis for the program hours 6
11 Distribution of the program hours 6
12 Time frame for the different subject areas 6
13 Humanities and Social Sciences 7
14 Basic Sciences and Mathematics 7
15 Basic Engineering Sciences 8
16 Applied Engineering Sciences and Design 9
17
Introduction
The Mechatronics Engineering program is a blend of mechanical engineering, electrical
engineering, computer engineering, control systems, and information technology.
Mechatronics is a design process to create more functional and adaptable products.
Mechatronics is a methodology for designing products that exhibit fast, precise performance.
These characteristics can be achieved by considering not only the mechanical design, but also
the use of servo controls, sensors, and electronics.
Mechatronic devices or ―smart‖ devices have become common in our technologically
advanced society. Examples of mechatronic devices include robots, anti-lock brakes,
photocopiers, clothes dryers and computer disk drives. Mechatronic devices can be found in
medicine and surgery, agriculture, buildings and homes, the toy and entertainment industry,
intelligent aids for the elderly and disabled. Employment opportunities exist in manufacturing
as well as in design, development, and research.
Program Objectives
The program objectives are:
1. To provide quality educational opportunities at the undergraduate level in mechatronics
engineering that prepare students for successful careers in industry, government and
academia.
2. To enable the graduates to understand the interdisciplinary fundamentals of mechanical
engineering, electrical engineering, control systems, computer engineering and their
integration.
3. To enable the graduates to successfully identify problems, design and optimize integrated
solutions by focusing on modern Mechatronics engineering practices.
4. To promote strong team skills among the graduates in order to enable them to
communicate and work effectively while solving complex problems in a multidisciplinary
environment.
5. To promote professional engineering principles, including ethics and responsiveness to
safety, health, and environmental issues.
6. To foster an efficient and enjoyable program environment which encourages continuous
self-learning and progression in career and in post-graduate studies if desired.
Degree Awarded
B.Sc (Honors) in Mechatronics Engineering
18
Program Outcomes
The Mechatronics Engineering Undergraduate Program is designed to provide students with
the following skills:
1. Knowledge of mathematics including calculus, differential equations, linear algebra
necessary to analyze and design complex systems containing hardware and software
components as related to mechatronics engineering.
2. An ability to apply knowledge of mathematics, science and engineering to the general
field of mechatronics engineering.
3. Familiarization with current technology and how it can be incorporated into their design,
analysis, and testing activities including an understanding of manufacturing methods and
the use of computers, sensors, and actuators to automate machines and processes.
4. Enough hands-on experience and an ability to use modern engineering tools to enhance
their productivity.
5. An ability to design a holistic Mechatronics system, components, or processes to meet
desired objectives.
6. An ability to focus on creative learning techniques, develop and evaluate alternate
solutions to real world problems.
7. An ability to communicate technical matters effectively in oral, written or in graphical
form
8. An ability to perform and function as a team member and work within multidisciplinary
teams.
9. An understanding of professional mechatronics engineering duties and ethical
responsibility.
10. An ability to engage in life-long learning pertaining to control systems engineering.
Degree Requirements
To obtain the B.Sc. degree in Mechatronics Engineering, the student must successfully
complete 193 credit hours, out of which 20 credit hours represent the University requirement
(humanities and social sciences), 57 credit hours represent the College requirements and 116
credit hours represent the Department requirements. The Departmental requirements are split
into 57 credit hours of compulsory core courses in basic engineering sciences, 53 credit hours
in control systems engineering and 6 credit hour final year project.
19
Subjects Codes
Subject Code
Islamic Studies ISL
Physics PHY
Chemistry CHM
Mathematics MTH
Training TRN
Coding Scheme
A 3 letter 3 digit (XXX999) coding is adopted:
3 Letters Subject Code
1 Digit Year or Level (1 for 1st Year, 2 for 2nd Year etc…)
1 Digit Semester within the year (1 for 1st Semester, 2 for 2nd Semester)
2 Digits Subject Serial Number
e.g.
MTH3107: Mathematics, 3rd Year, 1st Semester in 3rd Year, 7th Mathematics course
20
Statistical information
General analysis for the program hours
Semester One 18 6 9 33 23
Semester Two 17 8 12 37 23
Semester Three 18 6 11 35 22
Semester Four 14 6 15 35 19
Semester Five 14 8 9 31 19
Semester Six 12 6 12 30 17
Semester Seven 12 5 15 32 17
Semester Eight 12 4 14 30 17
Semester Nine 10 7 13 30 17
Semester Ten 10 5 16 29 19
Total 137 61 126 324 093
21
Humanities and Social Sciences courses
22
Basic Engineering Sciences courses
Total 42 19 50 57
23
Applied Engineering Sciences & Design courses
Contact
hours
Credit
Code Course Title Theo. Tut. Prac.
hours
MEC4112 CNC Technology 2 1 3 3
MEC4114 Applied Hydraulics and Pneumatics 2 1 3 3
ELE4112 Communication Systems 2 1 3 3
ELE4213 Digital Signal Processing 2 1 2 3
ELE4214 Instrumentation and Controller Design 2 1 3 3
ELE4215 Modeling and Simulation 2 1 3 3
MTE4201 Micro Controller and PLC based design 1 0 3 2
MTE4202 CAD/CAM 2 1 3 3
MTE5103 Manufacturing Planning and Control 2 2 0 3
MTE5104 Drives and Controls for Automation 2 1 2 3
MTE5105 Design of Mechatronic Systems 2 1 3 3
MTE5106 Micro Electro Mechanical Systems 2 2 0 3
MTE5107 Elective Course I 2 1 2 3
PRJ5101 Project I 0 0 6 2
MTE5108 Medical Mechatronics 2 1 2 3
MTE5109 Robotics Engineering 2 1 2 3
MTE5110 Product Design and Development 2 1 2 3
MTE5111 Automotive Electronics 2 1 2 3
MTE5112 Elective Course II 2 1 2 3
PRJ5202 Project II 0 0 6 4
Total 35 19 52 59
24
Course Plan
Semester 1
Semester 2
25
Semester 3
Semester 4
26
Semester 5
Semester 6
27
Semester 7
Semester 8
28
Semester 9
Semester 10
Electives
1. Microfabrication Processes
2. Neural Network and Fuzzy Logic
3. Finite Element Analysis
4. Optimization
5. Intelligent Controllers
6. Process Planning and Cost Estimation
7. Factory Automation
8. Computer Aided Inspection and Quality Assurance
9. Machine Interface Design
29
Course Descriptions:
30
PHY1101 Physics I : 3(2, 1, 3)
Prerequisite:- None
Objectives:
To introduce the basic topics in mechanics, waves, and thermodynamics for use in subsequent courses on
semiconductor devices, electricity and magnetism and optoelectronics. The course is an illustrated application of
the physics ideas to technology.
Description:-
Part 1: Mechanics; Physics and Measurement. Motion in One Dimension. Vectors. Motion in Two
Dimensions. The Laws of Motion. Circular Motion and Other Applications of Newton‘s Laws. Energy and
Energy Transfer. Potential Energy. Linear Momentum and Collisions. Rotation of a Rigid Object About a Fixed
Axis. Angular Momentum. Static Equilibrium and Elasticity. Universal Gravitation. Fluid Mechanics.
Part 2: Oscillations and Mechanical Waves; Oscillatory Motion. Wave Motion. Sound Waves. Superposition
and Standing Waves.
Part 3: Thermodynamics; Temperature. Heat and the First Law of Thermodynamics. The Kinetic Theory of
Gases. Heat Engines, Entropy, and the Second Law of Thermodynamics.
Textbooks:-
Raymond A. Serway and John W. Jewett, Jr., Physics For Scientists And Engineers With Modern Physics,
Seventh Edition, Brooks/Cole-Thomson Learning, 2008.
References:-
Douglas C. Giancoli, Physics For Scientists And Engineers With Modern Physics, Fourth Edition, Pearson
Prentice Hall, 2009.
31
hydrothermal, solvothermal, electrode position, chemical vapour deposition, laser ablation; Properties and
applications
Textbooks:
1. Jain P.C. and Monica Jain, ―Engineering Chemistry‖, Dhanpat Rai Publishing Company (P) Ltd., New
Delhi, 2010
2. Kannan P., Ravikrishnan A., ―Engineering Chemistry‖, Sri Krishna Hi-tech Publishing Company Pvt.
Ltd. Chennai, 2009
References:
1. Dara S.S, Umare S.S, ―Engineering Chemistry‖, S. Chand & Company Ltd., New Delhi 2010
2. Sivasankar B., ―Engineering Chemistry‖, Tata McGraw-Hill Publishing Company, Ltd., New Delhi,
2008.
3. Gowariker V.R. , Viswanathan N.V. and JayadevSreedhar, ―Polymer Science‖, New Age International
P (Ltd.,), Chennai, 2006.
4. Ozin G. A. and Arsenault A. C., ―Nanochemistry: A Chemical Approach to Nanomaterials‖, RSC
Publishing, 2005.
32
Textbook:-
James Stewart, Essential Calculus, Early Transcendentals, Cengage Learning; 2nd edition, 2012.
References:-
1. Robert T. Smith & Roland B. Minton "Calculus", McGraw-Hill Science/Engineering/Math; 3rd Edition,
2007.
2. Thomas, ―Calculus‖, Pearson Education, 12th Edition, 2010.
3. Stewart, ―Calculus‖, Thomson, 5th Edition, 2003.
4. Anton- Bivens- Davis, ―Calculus‖, John Wiley, 7th Edition, 2002.
33
4. Preparation, properties and applications of engineering materials.
5. Types of fuels, calorific value calculations, manufacture of solid, liquid and gaseous fuels.
Course Description:
Water Technology
Introduction to boiler feed water-requirements-formation of deposits in steam boilers and heat exchangers-
disadvantages (wastage of fuels, decrease in efficiency, boiler explosion) prevention of scale formation -
softening of hard water -external treatment zeolite and demineralization - internal treatment- boiler compounds
(phosphate, calgon, carbonate, colloidal) – caustic embrittlement -boiler corrosion-priming and foaming-
desalination of brackish water –reverse osmosis.
Electrochemistry and Corrosion
Electrochemical cell - redox reaction, electrode potential- origin of electrode potential- oxidation potential-
reduction potential, measurement and applications - electrochemical series and its significance - Nernst equation
(derivation and problems). Corrosion- causes- factors- typeschemical, electrochemical corrosion (galvanic,
differential aeration), corrosion control – material selection and design aspects - electrochemical protection –
sacrificial anode method and impressed current cathodic method. Paints- constituents and function.
Electroplating of Copper and electroless plating of nickel.
Energy Sources
Introduction- nuclear energy- nuclear fission- controlled nuclear fission- nuclear fusion- differences between
nuclear fission and fusion- nuclear chain reactions- nuclear reactor power generatorclassification of nuclear
reactor- light water reactor- breeder reactor- solar energy conversionsolar cells- wind energy. Batteries and fuel
cells:Types of batteries- alkaline battery- lead storage battery- nickel-cadmium battery- lithium battery- fuel cell
H2 -O2 fuel cell- applications.
Engineering Materials
Abrasives: definition, classification or types, grinding wheel, abrasive paper and cloth. Refractories: definition,
characteristics, classification, properties – refractoriness and RUL, dimensional stability, thermal spalling,
thermal expansion, porosity; Manufacture of alumina, magnesite and silicon carbide, Portland cement-
manufacture and properties - setting and hardening of cement, special cement- waterproof and white cement–
properties and uses. Glass - manufacture, types, properties and uses.
Fuels and Combustion
Fuel: Introduction- classification of fuels- calorific value- higher and lower calorific values- coalanalysis of coal
(proximate and ultimate)- carbonization- manufacture of metallurgical coke (Otto Hoffmann method) -
petroleum- manufacture of synthetic petrol (Bergius process)- knockingoctane number - diesel oil- cetane
number - natural gas- compressed natural gas(CNG)- liquefied petroleum gases(LPG)- producer gas- water gas.
Power alcohol and bio diesel. Combustion of fuels: introduction- theoretical calculation of calorific value-
calculation of stoichiometry of fuel and air ratio- ignition temperature- explosive range - flue gas analysis
(ORSAT Method).
TextBooks:
1. Vairam S, Kalyani P and SubaRamesh.,―Engineering Chemistry‖., Wiley India PvtLtd.,New Delhi.,
2011
2. DaraS.S,UmareS.S.―Engineering Chemistry‖, S. Chand & Company Ltd., New Delhi , 2010
References:
1. 1 Kannan P. and Ravikrishnan A., ―Engineering Chemistry‖, Sri Krishna Hi-tech Publishing Company
Pvt. Ltd. Chennai, 2009
2. AshimaSrivastava and Janhavi N N., ―Concepts of Engineering Chemistry‖, ACME Learning Private
Limited., New Delhi., 2010.
3. RenuBapna and Renu Gupta., ―Engineering Chemistry‖, Macmillan India Publisher Ltd., 2010.
4. 4 Pahari A and Chauhan B., ―Engineering Chemistry‖., Firewall Media., New Delhi., 2010
34
Textbook:-
J.L. Meriam and LG. Kraige, "Engineering Mechanics, Statics and Dynamics, 4th Edition, SI Version, 1998.
References:-
1. Ferdinand Beer, E. Russell Johnston, Elliot Eisenberg, David Mazurek, Vector Mechanics for
Engineers: Statics, McGraw-Hill Science/Engineering/Math; 9th edition, 2009.
2. Ferdinand Beer, E. Russell Johnston, Elliot Eisenberg, Phillip Cornwell, Vector Mechanics for
Engineers: Dynamics, McGraw-Hill Science/Engineering/Math; 9th edition, 2009.
35
positions), the plane, auxiliary planes, the positional problems, projection of circle, curved surfaces, intersection
of surfaces of revolution, perspective projection.
Textbook:
Thomas, E.E., Charls, J.V., and Robert J.F., Engineering Drawing and Graphic Technology, 14 th edition,
McGraw-Hill, 1993.
References:
Colin H., Simmons and Dennis E. Maguire, Manual of Engineering Drawing, 2 nd edition, 2004, Elsevier
Newnes, Linacre House, Jordan Hill, Oxford OX2 8DP, 200 Wheel Road, Burlington MA 01803.
36
Axial force, shear force and bending moment diagrams for statically determinate beams including beams with
internal hinges for different types of loading, relationship between rates of loading, shear force and bending
moment.
Stresses in Beams:
Theory of pure Bending, Assumptions, Flexural formula for straight beams, moment of resistance, bending
stress distribution, Section moduli for different sections, beams for uniform strength, Flitched beams.
Direct & Bending Stresses:
Core of Section, Chimneys subjected to wind pressure
Shear Stress in Beams:
Distribution of shear stress, across plane sections used commonly for structural purposes, shear connectors.
Torsion:
Torsion of circular shafts-solid and hollow, stresses in shafts when transmitting power, shafts in series and
parallel.
Strain Energy:
Resilience, proof Resilience, strain energy stored in the member due to gradually applies load, suddenly applied
load, impact load. Strain energy stored due to Shear, Bending and Torsion.
Deflection of Beams:
Deflection of Cantilever, simply supported and over hanging beams using double integration and Macaulay‘s
Method for different type of loadings.
Thin Cylindrical and Spherical Shells:
Cylinders and Spheres due to internal pressure. Cylindrical Shell with hemispherical end.
Textbook:-
Ferdinand Beer, E. Russell Johnston, John DeWolf, David Mazurek, ―Mechanics of Materials‖, McGraw-Hill
Science/Engineering/Math; 6th edition (January 4, 2011).
References:
1. Strength of Materials, Subramanyam, Oxford University Press, Edition 2005
2. Mechanics of Materials, B.C Punmia Ashok Jain, Arun Jain, Lakshmi Publications, NewDelhi.
3. Strength of Materials, Basavarajaiah and MahadevappaKhanna Publishers, New Delhi.
4. Strength of Materials, Singer Harper and Row Publications
5. Elements of Strength of Materials, Timoshenko and Young Affliated East-West Press.
6. Mechanics of Materials, James M. Gere (5th Edition), Thomson Learning
7. Strength of Materials—S. Ramamrutham, DhanpatRai Pvt. Ltd.
8. Mechanics of Materials—S. S. Rattan, TMH Pvt. Ltd.
9. Mechanics of Structures—S. B. Junnarkar, Charotar Publication.
10. Strength of Materials—W. Nash, Schaum‘s Outline Series, McGraw Hill Publication.
37
Ferrous Metals and Alloys: The Iron-Iron Carbide Phase Diagram. Classification of Plain Carbon Steels and
Cast Irons. Effect of alloying elements in steels. TTT diagram & CCT diagram. Annealing, normalizing,
tempering, hardening and surface hardening processes.
Nonferrous Metals and Alloys: Basic treatment only. Important nonferrous materials like aluminium, copper,
nickel, tin, zinc and their alloys, properties and applications.
Powder Metallurgy: Powder manufacturing methods; Powder Metallurgy Process. Applications such as oil
impregnated Bearings and Cemented Carbides. Limitations of Powder Metallurgy.
Electronic Materials: Band structure of solids. Conductivity of metals and alloys. Semiconductors and
superconducting materials. Insulators and dielectric properties. Electrostriction, piezoelectricity and
ferroelectricity.
Photonic Materials: Refraction, reflection, absorption and transmission. Luminescence, Photoconductivity,
Lasers, optical fibers in communications.
Magnetic Materials: classification of magnetic materials. Diamagnetic, paramagnetic, ferromagnetic,
ferrimagnetic and super paramagnetic materials. Metallic and ceramic magnetic materials. Applications of
magnetic materials.
Ceramics: Definition, comparative study of structure and properties of Engineering Ceramics with reference to
metallic materials. Toughening mechanisms in ceramics. Engineering application of Ceramics.
Polymers: Classification of polymers. Thermoplastics, effect of temperature on thermoplastics, mechanical
properties of thermoplastics. Thermosetting polymers and elastomers.
Composites: Definition; Classification; Particle-reinforced composites and fibre-reinforced composites. Rule of
mixtures; Sandwich structures. Classification of composites on basis of matrix materials.
Nano-structured Materials: Definition and Introduction to nano- technology. Unique features of nano-
structured materials. Typical applications.
Modern Engineering Materials: Smart materials, Shape memory alloys, Chromic materials (Thermo, Photo
and Electro), Rheological fluids, Metallic glasses.
References:
1. The Science and Engineering of Materials (6 th Edition), by Donald R. Askeland, Pradeep P. Fulay,
Wendelin J. Wright, Cengage Learning, Inc., Stamford, USA., (2010)
2. Materials Science and Engineering: An Itroduction (8th Edition), by William D. Callister, Jr. –
Adapted by R. Balasubramaniam. Wiley India (P) Ltd., (2010).
3. Introduction to Physical Metallurgy (2nd Edition), by S H Avner, Tata McGraw Hill (1997).
4. A Text Book of Nanoscience and Nanotechnology, by Pradeep.T, Tata McGraw Hill, New Delhi,
(2012).
5. Material Science, by S.L. Kakani, New Age International, (2006).
6. Electronic Properties of Materials (4th Edition), by Rolf.E. Hummel, Springer, New York, (2011).
7. Photonic Crystals: Theory, Applications, and Fabrication, by Dennis W Prather, John Wiley & Sons,
Hoboken, (2009).
38
Solution using first order equation for standard input signals: Transient and steady state time response,
solution using universal formula
Time domain analysis of R-L-C circuits: Second order forced and natural response and concept of damping
Frequency domain analysis of RLC circuits
S-domain representation, applications of Laplace Transform in solving electrical networks, driving point and
transfer function,
Poles and Zeros, calculation of residues by analytical and graphical method
Frequency response
Text Books
1. V. N. Mittal and Arvind Mittal ―Basic Electrical Engineering‖ Tata McGraw Hill, (Revised Edition)
2. Electrical Engineering Fundamentals" by Vincent Del Toro, PHI Second edition ,2011
3. Electronics Devices & Circuit Theory" by Boylestad, Pearson Education India
4. Edward Hughes: Electrical and Electrical Technology, Pearson Education (Tenth edition)
5. D P Kothari and I J Nagrath ―Theory and Problems of Basic Electrical Engineering‖, PHI 13 th edition
2011.
Reference Books:
1. B.L.Theraja ―Electrical Engineering ― Vol-I and II,
2. S.N.Singh, ―Basic Electrical Engineering‖ PHI , 2011
39
3. Bimbhra P.S., Electric Machinery , Khanna Publisher, New Delhi
4. M. A. Mazadi and J. C. Mazadi, ―The 8051 Microcontroller and Embedded Systems‖, Pearson
Education, New Delhi
5. John Uffenbeck , ―8086/8088 family: Design Programming and Interfacing‖, Pearson Education, New
Delhi
40
Impulse turbines, Reaction turbines, velocity diagram, degree of reaction, compounding of steam turbines,
Parson‘s turbine, condition for maximum efficiency.
Internal Combustion Engines
Air standard cycles, Carnot, Otto, diesel, dual cycles and their comparison, Two stroke and Four stroke engines,
CI and SI engines, Environmental and pollution control issues and remedies
Gas Turbines
Ideal and actual Brayton cycle, open and closed cycle gas turbine, Applications of gas turbine in aviation and
power generation,
Heat Transfer
Typical heat transfer situations, Modes of heat transfer
Conduction
Fourier‘s law of heat conduction, thermal conductivity, differential equation of heat conduction with heat
generation in unsteady state in the Cartesian coordinate system, Steady heat conduction in plane walls,
composite walls, Concept of thermal resistance and thermal resistance network, Heat conduction in cylinders
and spheres, (Derivation NOT INCLUDED for Cylindrical as well as Spherical coordinate systems), Critical
thickness/radius of insulation and its importance.
Transient Heat Conduction
Lumped system analysis, One dimensional transient problems analytical solutions
Convection
Physical mechanism of convection, Natural and Forced convection, Laminar flow heat transfer in circular pipe,
constant heat flux and constant wall temperature, Turbulent flow heat transfer in circular pipes, Pipes of other
cross sections, Heat transfer in laminar and turbulent flow over a flat plate, Principles of dimensional analysis
and its application in convective heat transfer, Physical significance of various dimensionless numbers useful in
natural and forced convection
Radiation
Basic laws of radiation (Plank‘s law, Kirchoff‘s law, Stefan-Boltzman law, Wien‘s displacement law, Lambert‘s
cosine law), Radiation exchange between black surfaces, Shape factor, Radiation exchange between gray
surfaces, Radiation shield and the radiation effect
Boiling and Condensation
Pool boiling, Flow boiling, Film condensation, Drop wise condensation
Heat Exchangers
Types of heat exchangers, Overall heat transfer coefficient, Analysis of heat exchangers, LMTD method,
Effectiveness-NTU method
References:
1. Introduction to Thermodynamics and Heat Transfer, Yunus Cengel, 2nd ed, McGraw-Hill
2. Fundamentals of Thermodynamics, Sonntag, Borgnakke, Van Wylen, Wiley India Pvt. Ltd.
3. Applied Thermodynamics, Onkar Singh, 3rd ed, New Age International
4. Basic Engineering Thermodynamics, Rayner Joel, Longman Publishers
5. Basic Engineering Thermodynamics, Zemanski and Van ness, TMH
6. Fundamentals of Heat and Mass Transfer, F. P. Incropera and D. P.DeWitt, Wiley India Pvt. Ltd.
7. Heat Transfer, 9th ed., J P Holman, McGraw Hill
8. Fundamentals of Engineering Heat and Mass Transfer, 4th ed., R C Sachdeva, New Age International
9. Comprehensive Heat Transfer, M M Rathod, Laxmi Publications
10. Principles of Heat Transfer, Srinivasan D, New Age International
11. Heat Transfer, 2nd ed., A F Mills and V Ganesan, PEARSON
12. Principles of Heat Transfer, 6th ed., Frank Kreith, CENGAGE Learning
13. Heat Transfer, S P Sukhatme, University Press
14. Engineering Heat Transfer, N V Suryanarayana, Penram Publication
15. Heat Transfer, Y V C Rao, University Press
41
Solid Geometry: Intersection of surfaces and interpenetration of solids- Intersection of prism or cylinder with
prism; cylinder or cone, both solids in simple position only. Primary auxiliary views and auxiliary projections of
simple machine parts.
Machine Elements: Preparation of 2-D drawings of standard machine elements (nuts, bolts, keys, cotter,
screws, spring etc.)
Conventional representation of assembly of threaded parts in external and sectional views, Types of threads;
thread designation, Conventional representation of machine components and materials, Designation of standard
components.
Limits fits and tolerances: Dimensioning with tolerances indicating various types of fits in details and assembly
drawings, Types of assembly drawings, part drawings, drawings for catalogues and instruction manuals, patent
drawings, drawing standards.
Details and assembly drawing: Introduction to the unit assembly drawing, steps involved in preparing
assembly drawing from details and vice-versa, Sequence in assembly.
Preparation of details and assembly drawings of any two from: Clapper block, Single tool post, Lathe and
Milling tail stock.
Cotter, Knuckle joint, Keys and Couplings: keys-sunk, parallel woodruff, saddle, feather etc. Coupling: simple,
muff, flanged.
Protected flange coupling, Oldham‘s coupling, Universal coupling.
Preparation of details and assembly drawings of Bearings: Simple, solid, Bushed bearing. I.S. conventional
representation of ball and roller bearing.
Pedestal bearing, footstep bearing
Preparation of details and assembly drawings of pulleys, Pipe joints: Classification of Pulleys, pipe joints
Pulleys: Flat belt, V-belt, rope belt, Fast and loose pulleys.
Pipe joints (any two): Flanged joints, Socket and spigot joint, Gland and stuffing box, expansion joint.
Preparation of details and assembly drawings of Valves, I.C. Engine parts: Types of Valves, introduction to
I.C. Engine
Preparation of details and assembly drawings of (any three): Air cock; Blow off cock, Steam stop valve,
Gate valve, Globe valve, Non return Valve, I.C. Engine parts: Piston, Connecting rod, Cross head, Crankshaft,
Carburetor, Fuel pump, injector, and Spark plug.
Preparation of details and assembly drawings of Jigs and Fixtures: Introduction to Jigs and fixtures.
Jigs and Fixtures (any two from each)
Reverse Engineering of a physical model: disassembling of any physical model having not less than five parts,
sketch the minimum views required for each component, measure all the required dimensions of each
component, convert these sketches into 3-D model and create an assembly drawing with actual dimensions
References:
1. Machine Drawingby N.D. Bhatt.
2. A text book of Machine Drawing byLaxminarayan&M.L.Mathur.(Jain brothers Delhi).
3. Machine DrawingbyKamat&Rao.
4. Machine DrawingbyM.B.Shah
5. A text book of Machine Drawing by R.B.Gupta(Satyaprakashan, Tech. Publication)
6. Machine Drawing by K.I.Narayana, P.Kannaiah, K.Venkata Reddy.
7. Machine Drawing by Sidheshwar and Kanheya
8. Autodesk Inventor 2011 for Engineers and Designers by ShamTickoo,SurinderRaina (dreamtech
Press).
9. Engineering Drawing by P J Shah
10. Engineering Drawing by N D Bhatt
42
Environment, Ecosystems and Biodiversity
Definition, scope and importance of Risk and hazards; Chemical hazards, Physical hazards, Biological hazards
in the environment – concept of an ecosystem – structure and function of an ecosystem – producers, consumers
and decomposers-Oxygen cycle and Nitrogen cycle – energy flow in the ecosystem – ecological succession
processes – Introduction, types, characteristic features, structure and function of the (a) forest ecosystem (b)
grassland ecosystem (c) desert ecosystem (d) aquatic ecosystems (ponds, streams, lakes, rivers, oceans,
estuaries) – Introduction to biodiversity definition: genetic, species and ecosystem diversity – biogeographical
classification of India – value of biodiversity: consumptive use, productive use, social, ethical, aesthetic and
option values – Biodiversity at global, national and local levels – India as a mega-diversity nation – hot-spots of
biodiversity – threats to biodiversity: habitat loss, poaching of wildlife, man-wildlife conflicts – endangered and
endemic species of India – conservation of biodiversity: In-situ and ex-situ conservation of biodiversity. Field
study of common plants, insects, birds Field study of simple ecosystems – pond, river, hill slopes, etc.
Environmental Pollution
Definition – causes, effects and control measures of: (a) Air pollution (Atmospheric chemistry- Chemical
composition of the atmosphere; Chemical and photochemical reactions in the atmosphere - formation of smog,
PAN, acid rain, oxygen and ozone chemistry;- Mitigation procedures- Control of particulate and gaseous
emission, Control of SO2, NOX, CO and HC) (b) Water pollution : Physical and chemical properties of
terrestrial and marine water and their environmental significance; Water quality parameters – physical, chemical
and biological; absorption of heavy metals - Water treatment processes. (c) Soil pollution - soil waste
management: causes, effects and control measures of municipal solid wastes – (d) Marine pollution (e) Noise
pollution (f) Thermal pollution (g) Nuclear hazards–role of an individual in prevention of pollution – pollution
case studies – Field study of local polluted site – Urban / Rural / Industrial / Agricultural.
Natural Resources
Forest resources: Use and over-exploitation, deforestation, case studies- timber extraction, mining, dams and
their effects on forests and tribal people – Water resources: Use and overutilization of surface and ground water,
dams-benefits and problems – Mineral resources: Use and exploitation, environmental effects of extracting and
using mineral resources, case studies – Food resources: World food problems, changes caused by agriculture
and overgrazing, effects of modern agriculture, fertilizer-pesticide problems, water logging, salinity, case studies
– Energy resources: Growing energy needs, renewable and non renewable energy sources, use of alternate
energy sources. Energy Conversion processes – Biogas – production and uses, anaerobic digestion; case studies
– Land resources: Land as a resource, land degradation, man induced landslides, soil erosion and desertification
– role of an individual in conservation of natural resources – Equitable use of resources for sustainable
lifestyles. Introduction to Environmental Biochemistry: Proteins –Biochemical degradation of pollutants,
Bioconversion of pollutants. Field study of local area to document environmental assets – river / forest /
grassland / hill / mountain.
Social Issues and the Environment
From unsustainable to sustainable development – urban problems related to energy – water conservation, rain
water harvesting, watershed management – resettlement and rehabilitation of people; its problems and concerns,
case studies – role of non-governmental organizationenvironmental ethics: Issues and possible solutions – 12
Principles of green chemistry- nuclear accidents and holocaust, case studies. – wasteland reclamation –
consumerism and waste products – environment production act – Air act – Water act – Wildlife protection act –
Forest conservation act – The Biomedical Waste (Management and Handling) Rules; 1998 and amendments-
scheme of labeling of environmentally friendly products (Ecomark). enforcement machinery involved in
environmental legislation- central and state pollution control boards- disaster management: floods, earthquake,
cyclone and landslides. Public awareness.
Human Population and the Environment
Population growth, variation among nations – population explosion – family welfare programme – environment
and human health – human rights – value education – HIV / AIDS – women and child welfare –Environmental
impact analysis (EIA)- -GIS-remote sensing-role of information technology in environment and human health –
Case studies.
Textbooks :
1. Gilbert M.Masters, ‗Introduction to Environmental Engineering and Science‘, 2nd Edition, Pearson
Education, 2004.
2. Benny Joseph, ‗Environmental Science and Engineering‘, Tata McGraw-Hill, New Delhi, 2006.
References:
1. Trivedi R.K., ‗Handbook of Environmental Laws, Rules, Guidelines, Compliances and Standards‘,
Vol. I and II, Enviro Media.
2. Cunningham, W.P. Cooper, T.H. Gorhani, ‗Environmental Encyclopedia‘, Jaico Publ., House,
Mumbai, 2001.
3. Dharmendra S. Sengar, ‗Environmental law‘, Prentice hall of India Pvt Ltd, New Delhi, 2007.
43
4. Rajagopalan, R, ‗Environmental Studies-From Crisis to Cure‘, Oxford University Press, 2005.
44
D‘Alemberts Principle, Application of motion of bars, cylinders and spheres only. Kinetics of Rigid Bodies:
Kinetic energy in translating motion, Rotation about fixed axis and in general plane motion.
Basic Kinematics:
Kinematic link, Types of links, Kinematic pair, Types of constrained motions, Types of Kinematic pairs,
Kinematic chain, Types of joints, Mechanism, Machine, Degree of freedom (Mobility), Kutzbach crieterion,
Grubler‘s criterio Four bar chain and its inversions, Double slider crank chain and its inversions.
Mechanisms:
Straight line generating Mechanisms: Exact Straight Line Generating Mechanisms –Peaucellier approximate
Straight Line Generating Mechanisms – Watt, Grasshopper and Tchebicheff‘s. Compliant mechanisms, Flexure
based straight line mechanism. Offset slider crank mechanisms, Pantograph,
Overview of mechanisms used in mechatronics systems: image scanner, 3D printer.
Velocity & Acceleration analysis of Mechanisms
Velocity Analysis of mechanisms (mechanisms up to 6 links).
Velocity analysis by instantaneous center of rotation method (Graphical approach) Velocity analysis by relative
velocity method (Graphical approach) Analysis is extended to find rubbing velocities at joints, mechanical
advantage (Graphical approach). Velocity analysis of low
degree complexity mechanisms (Graphical approach). Auxiliary point method
Velocity and Acceleration analysis of mechanism. Velocity and Acceleration –analysis by relative method
(mechanisms up to 6 link) including pairs involving Coriolis acceleration (Graphical Approach).
Synthesis of Mechanisms and linkages: Classification of Synthesis Problem, precision points for function
Generation, Graphical synthesis of four bar mechanism, Three position synthesis, Four point synthesis, coupler-
curve synthesis, Graphical synthesis of slider crank mechanism, Least square technique, Synthesis of four bar
mechanism for body guidance.
Belts and Chains
Belt –Types of belts, velocity ratio, slip & creep, length of belt for open
& cross system. Law of belting, Dynamic analysis- driving tensions, centrifugal tension, initial tension,
condition of maximum power transmission.
Chains –types of chains, chordal action, variation in velocity ratio,
Length of chain.
Gears
Law of gearing, Involute and Cycloid gear tooth profile, Construction of
Involute profile. Path of contact, arc of contact, contact ratio for involutes and cycloidal tooth profile,
Interference in involutes gears. Critical Numbers of teeth for interference free motion. Static force analysis in
gears- spur, helical, worm & worm wheel.
Gear Trains
Kinematics and dynamic analysis of - simple gear trains, Module compound gear trains, reverted gear trains,
epicyclic gear trains with spur or bevel gear combination.
Cams and Followers
Cam and its Classifications.
Followers and its Classification.
Motion analysis and plotting of displacement-time, velocity-time, acceleration- time, jerk-time graphs for
uniform velocity. UARM, SHM.
Motion analysis of simple cams –R-R cam, D-R-R and D-R-D-R cam operating radial translating follower.
Layout of cam profiles.
References:
1. Theory or Mechanisms and Machines by Amitabh Ghosh and A. Kumar Mallik.
2. Theory of Machines and Mechanism by John Uiker, Garden Pennock& Late. J. F. shigley
3. Theory of Machines –P. L. Ballaney
4. Theory of Machines by S. S. Rattan
5. Kinematics of Machines by R T Hinckle (Prentice Hall Inc.)
6. Kinematics By V.M. Fairs (McGraw Hill)
7. Mechanism Design: Analysis and Synthesis Vol. I by A. Erdman and G.N. Sander (Prentice Hall)
8. Kinematics and Dynamics of Planer Mechanisms by Jeremy Hirsihham (McGraw Hill).
45
2. To study the transport of mass, momentum and energy.
3. To study the applications of the conservation laws to flow though pipes and hydraulics machines.
Course Description:
Introduction: Units & Dimensions. Properties of fluids – Specific gravity, specific weight, viscosity,
compressibility, vapour pressure and gas laws – capillarity and surface tension. Flow characteristics: concepts of
system and control volume. Classification of fluids - Properties of fluids. Centre of pressure - Plane and curved
surfaces. Buoyancy and stability of floating bodies.
Fluid Kinematics and Fluid Dynamics:
Fluid kinematics: stream line, path line and streak lines and stream tube, classification of flows-steady &
unsteady, uniform, non uniform, laminar, turbulent, rotational, and irrotational flows-equation of continuity for
one dimensional flow.
Fluid dynamics: surface and body forces –Euler‘s and Bernoulli‘s equations for flow along a stream line,
Bernoulli‘s equation - applications - Venturi meter – Orifice meter Pitot tube. Momentum equation and its
application on force on pipe bend. Applications of momentum equations.
Incompressible Fluid Flow: Viscous flow - Shear stress, pressure gradient relationship - laminar flow between
parallel plates - Laminar flow though circular conduits and circular annuli. Boundary layer concepts. Boundary
layer thickness. Hydraulic and energy gradient. Darcy – Weibach equation. Friction factor and Moody diagram.
Commercial pipes. Minor losses. Flow though pipes in series and in parallel.
Dimensional Analysis: Dimension and units: Buckingham‘s П theorem. Discussion on dimensionless
parameters. Models and similitude. Applications of dimensionless parameters. Model analysis Dimensionless
number and their significance, model laws, Reynolod‘s model law, Fraude‘s model law, Euler‘s model law,
Weber‘s model law, Mach‘s Model law, Type of models, scale effect in model, limitation of hydraulic
similitude.
Hydraulic Turbines: Hydro turbines: Definition and classification, turbines, impulse and reaction turbines,
Pelton wheel, Francis turbine and Kaplan turbine - working proportions, work done, efficiencies, hydraulic
design –draft tube- theory- functions and efficiency.
Hydraulic Pumps: Pumps: definition and classifications - Centrifugal pump; classifications, working principle,
velocity triangles, Work done - Reciprocating pump: classification, working principle, Basic principles of
indicator diagram. Performance parameters and characteristics of pumps and turbines; Positive displacement
pumps.
References:
1. Frank M. White, 1999, Fluid Mechanics, 4e, McGraw-Hill.
2. Streeter V.L., and Wylie, E.B., ―Fluid Mechanics‖,4th Edtion, McGraw-Hill, 1983.
3. Babu.V ―Fundamentals of Incompressible Flow‖, CRC press, First Edition, 2010.
4. White F.M., ―Fluid Mechanics‖, 5th Edition, Tata McGraw-Hill, New Delhi, 2003.
5. Som S.K., and Biswas, G., ―Introduction to Fluid Mechanics and Fluid Machines‖, 2nd Edition, Tata
McGraw-Hill, 2004.
6. Vijay Gupta, Santhosh Kumar Gupta, ―Fluid Mechanics and it applications‖, New Age International
Publishers, 2nd Edition, 2011.
7. Kumar. K.L., Engineering Fluid Mechanics (VII Ed.) Eurasia Publishing House (P) Ltd., New Delhi,
1995.
8. Bansal, R.K., Fluid Mechanics and Hydraulics Machines, Laxmi Publications (P) Ltd., New Delhi.
46
Developing a simple Java Program
Java classes and objects
Arrays, Vectors ,Strings and Wrapper classes
Constructor and Finalize
Parameterized Methods and classes
Exception Handling
I/O Processor
Inheritance
Understanding Inheritance
Forms of Inheritance
Super and Final Key words
Abstract classes and Interfaces
Multithreading and Packaging
References:
1. E Balgurusamy, ―Programming with JAVA‖, Tata McGraw Hill
2. G. T. Thampi ,‖Object Oriented Programming in Java‖, Dream Tech Press
3. Herbert Schildt, ―The Complete Reference JAVA‖, Tata McGraw Hill
47
ELE3105 Measurements & Instrumentation: 3(2, 1, 3)
Pre-requisite: ELE2101 Fundamentals of Electrical Engineering, ELE2102 Analog Electronics
Objective:-
1. To provide students with the basic knowledge, understanding and skills in performing measurements
using measuring equipment on fundamental electrical quantities.
2. To present the main building blocks of electronic measurement systems, including amplifiers, filters,
and transmission media.
Description:-
Principles and systems of measurements of current , voltage, power, resistance, capacitance, inductance, energy,
phase angle, frequency, and time at different frequencies ( direct current, radio frequencies , microwave
frequencies and optical frequencies). Measurements of field strength, signal to noise and interference ratio,
attenuation, and frequency response of materials and systems at high frequencies.
Op Amp Circuits for Electronic Instrumentation. Signal Conditioning and Transmission. Active Filter Design.
Noise Reduction Techniques. Sensors. Digital & analogue techniques. Instrumentation in industrial & harsh
environments
Textbook:-
A.K. Sawhney, " A Course in Electrical and Electronic Measurements and Instrumentation", DHANPAT RAI,
Seventeenth Edition, 2004
References:-
1. Martin U, Reissland, Electrical Measurements: Fundamentals, Concepts, and Applications, New Age
International Publishers, New Delhi, 2003
2. Kalsi—Electronic Instrumentation , TMH
3. P.P.L. Regtien, Electronic instrumentation, Delft Academic Press, VSSD, Hill, 2005.
4. Analysis and Application of Analog Electronic Circuits to Biomedical Instrumentation, Robert B.
Northrop, CRC PRESS, 2004, ISBN: 0-8493-2143-3
5. Fundamentals of Instrumentation and Measurement, Ed. Dominique Placko, ISTE Ltd, 2007.
6. Ramon Pallas-Areny, John G. Webster, Sensors and Signal Conditioning, Wiley-Interscience; 2nd
edition, 2000.
48
Data Converters
Analog to Digital: Performance parameters of ADC, Single Ramp ADC, ADC using DAC, Dual Slope ADC,
Successive Approximation ADC, Flash ADC, ADC0808/0809 and its interfacing
Digital to Analog: Performance parameters of DAC, Binary weighted register DAC, R/2R ladder DAC,
Inverted R/2R ladder DAC, DAC0808 and its interfacing
Special Purpose Integrated Circuits
Functional block diagram, working, design and applications of Timer 555.
Functional block diagram, working and applications of VCO 566, PLL 565, multiplier 534, waveform generator
XR 2206, power amplifier LM380.
Voltage Regulators
Functional block diagram, working and design of three terminal fixed (78XX, 79XX series) and three terminal
adjustable (LM 317, LM 337) voltage regulators.
Functional block diagram, working and design of general purpose 723 (LVLC, LVHC, HVLC and HVHC) with
current limit and current fold-back protection, Switching regulator topologies, Functional block diagram and
working of LT1070 monolithic switching regulator.
References:
1. Sergio Franco, ―Design with operational amplifiers and analog integrated circuits‖, Tata McGraw Hill,
3rd Edition.
2. William D. Stanley, ―Operational Amplifiers with Linear Integrated Circuits ‖, Pearson, 4th Edition
3. D. Roy Choudhury and S. B. Jain, ―Linear Integrated Circuits‖, New Age International Publishers, 4th
Edition.
4. David A. Bell, ―Operation Amplifiers and Linear Integrated Circuits‖, Oxford University Press, Indian
Edition.
5. Ramakant A. Gayakwad, ―Op-Amps and Linear Integrated Circuits‖, Pearson Prentice Hall, 4th
Edition.
6. R. P. Jain, ―Modern Digital Electronics,‖ Tata McGraw Hill, 3rd Edition.
7. Ron Mancini, ―Op Amps for Everyone‖, Newnes, 2nd Edition.
8. J. Millman and A. Grabel, ―Microelectronics‖, Tata McGraw Hill, 2nd Edition.
9. R. F. Coughlin and F. F. Driscoll, ―Operation Amplifiers and Linear Integrated Circuits‖, Prentice Hall,
6th Edition.
10. J. G. Graeme, G. E. Tobey and L. P. Huelsman, ―Operational Amplifiers- Design & Applications‖,
NewYork: McGraw-Hill, Burr-Brown Research Corporation.
49
Machine Tools (Construction and Operations): Lathe machine, shaping, planning and slotting machine.
Milling machine – classification, types of cutters, Indexing methods- Simple problems. Drilling and boring
machine. Gear cutting machines- classification. Grinding machines – classification.
Welding: Arc welding, resistance welding, oxyfuel gas welding, forge welding, friction stir welding and
ultrasonic welding.
Brazing: types of brazed joints, brazing methods.
Soldering and Adhesive Bonding: Joint designs in soldering, solders and fluxes, soldering methods. Adhesive
joint designs, adhesive types, adhesive application technology, advantages and limitations.
Unconventional machining processes: classification according to type of energy used for machining, basic
principles, machines and applications of, Electrical discharge machining (EDM), Electron beam machining
(EBM) , Plasma arc machining (PAM), Laser beam machining (LBM), Electrochemical machining (ECM),
Chemical machining (CHM), Ultrasonic machining (USM).
Additive Manufacturing: Fundamentals of rapid prototyping, stereo lithography, laminated object
manufacturing, fused deposition modeling, 3D printing, selective laser sintering.
Processing of Integrated Circuits: processing sequence, silicon processing, photolithography, layer processes
used in IC fabrication, IC packaging.
Electronic assembly and packaging: PCB structure, types and materials. Processes used in PCB fabrication,
PCB assembly.
References:
1. Elements of Workshop Technology (Volume -1 & 2) by S. K. Hajra Choudhary, A. K. Hajra
Choudhary, Nirjhar Roy, Media promoters (2010).
2. A Course in Workshop Technology (Vol. I & II) by B. S. Raghuwanshi, Dhanpat Rai & CO. (2001).
3. Workshop Technology Part 1, 2 and 3. By W. A. J. Chapman, Taylor & Francis (1972).
4. Production Technology – HMT, Tata McGraw-Hill (1980).
5. Manufacturing, Engineering and Technology, 4th Edition, by Serope Kalpakjian, Steven R. Schmid,
published by Pearson (2005).
6. Fundamentals of Modern Manufacturing- Materials, Processes and Systems, 3rd Edition by Mikell P.
Groover, Wiley India (2002).
7. Manufacturing Processes for Engineering Materials, 4th Edition, by Serope Kalpakjian, Steven R.
Schmid, published by Pearson (2007).
50
Crankshaft torque, Turning moment diagrams, fluctuation of Energy, Design of Flywheels for IC Engines and
punching presses.
References:
1. Design of machine elements -- V. B. Bhandari. Tara Mc-Graw Hill Pub.
2. Design of machine elements -- Sharma,Purohil. Prentice Hall India Pub.
3. Machine Design - An Integrated Approach -- Robert L. Norton – PearsonEducation.
4. Machine Design - Pandya & Shah- Charotar PI/blishing.
5. Mechanical Engineering Design - J. E. Shigley - McGraw Hill
6. Recommended Data Books - PSG, K. Mahadevan
7. Machine Design - Reshetov - Mir Publication
8. Machine Design - Black Adams-Mcgraw Hill
9. Fundamentals of Machine Elements - Hawrock, Jacobson Mcgraw Hill
10. Machine Design - Patel, Pandya, Sikh, Vol. - I & II, C. Jamnadas& Co. Educational & Law Publishers
11. Design of Machine Elements - V.M. Faires
12. Design of Machine Elements - Spotts.
51
Properties of Fourier Transform: Linearity, time shifting, time reversal, frequency shifting, time and
frequency scaling, modulation, convolution in time domain, differentiation in time domain, differentiation in
frequency domain, symmetry. Parsevel‘s relation. Energy, power spectral density and bandwidth. Definition and
problems on DTFT
References:
1. Alan V. Oppenhiem, Alan S. Willsky and S. Hamid Nawab, Signals and Systems, PrenticeHall of
India, Second Edition, 2002
2. B.P. Lathi, Principles of Linear Systems and Signals, Oxford, Second Edition, 2010.
3. Simon Haykin and Barry Van Veen, Signals and Sytems, John Wiley and Sons, Second Edition, 2004.
4. Hwei. P Hsu, Signals and Systems, Tata McGraw Hill, Third edition, 2010.
5. NagoorKani, Signals and Systems, Tata McGraw Hill, Third Edition, 2011.
6. Chi-Tsong Chen, Signals and Systems, Oxford Indian Edition, Third Edition 2012.
7. Luis F. Chaparro, Signals and Systems Using MATLAB, Academic Press, 2011.
8. Michael J Roberts, Fundamentals of Signals and systems, Tata McGraw Hill, special Indian Economy
edition, 2009.
9. Rodger E Ziemer, William H. Tranter and D. Ronald Fannin, Signals and Systems, Pearson Education,
Fourth Edition 2009.
52
Employment Skills
Cover letter
Resume
Group Discussion
Presentation Skills
Interview Skills
List of Assignments:
1. Report Writing (Synopsis or the first draft of the Report)
2. Technical Proposal (Group activity, document of the proposal)
3. Interpersonal Skills (Group activity and Role play)
4. Interpersonal Skills (Documentation in the form of soft copy or hard copy)
5. Meetings and Documentation (Notice, Agenda, Minutes of Mock Meetings)
6. Corporate ethics and etiquettes (Case study, Role play)
7. Cover Letter and Resume
8. Printout of the PowerPoint presentation
References:
1. Fred Luthans, ―Organizational Behavior‖ , Mc Graw Hill, edition
2. Lesiker and Petit, ―Report Writing for Business‖ , Mc Graw Hill, edition
3. Huckin and Olsen, ―Technical Writing and Professional Communication‖, McGraw Hill
4. Wallace and Masters, ―Personal Development for Life and Work‖ , Thomson Learning, 12th edition
5. Heta Murphy, ―Effective Business Communication‖ , Mc Graw Hill, edition
6. R.C Sharma and Krishna Mohan, ―Business Correspondence and Report Writing‖,
7. B N Ghosh, ―Managing Soft Skills for Personality Development‖, Tata McGraw Hill. Lehman,
8. Dufrene, Sinha, ―BCOM‖, Cengage Learning, 2nd edition
9. Bell . Smith, ―Management Communication‖ Wiley India Edition,3rd edition.
10. Dr. K. Alex ,‖Soft Skills‖, S Chand and Company
11. Dr. K. Alex,‖SoftSkills‖,S Chand and Company
12. R. Subramaniam, ―Professional Ethics‖ Oxford University Press 2013.
53
2. Study of different types of actuators.
Course Description:
Significance of Sensor Measurements, Classification of Sensors, Analog vs Digital Sensors
Static characteristics: Static calibration, Linearity, Static Sensitivity, Accuracy, Static error, Precision,
Reproducibility, Threshold, Resolution, Hysteresis, Drift, Span & Range etc.
Dynamic Characteristics: Sensor bandwidth and frequency response
Signal conditioning: Amplifier, Conversion, Filtering, Impedance Buffering
Types of errors, Effect of component errors, Probable errors.
Selection criteria of sensors for mechatronic systems
Displacement Measurement: Transducers for displacement, displacement measurement, potentiometer,
LVDT, Capacitance Types, Digital Transducers (optical encoder),
Strain Measurement: Theory of Strain Gauges, gauge factor, temperature Compensation, Wheatstone Bridge
circuit, orientation of strain gauges for force and torque, Strain gauge based load cells and torque sensors
Measurement of Angular Velocity: Tachometers, Digital tachometers and Stroboscopic Methods.
Acceleration Measurement, theory of accelerometer and vibrometers, practical accelerometers, strain gauge
based and piezoelectric accelerometers.
Pressure Measurement: Microphones, Elastic pressure transducers, bellows and piezoelectric pressure sensors,
High Pressure Measurements, Bridge man gauge. Vacuum measurement,
Flow Measurement: Bernoullis flowmeters, Ultrasonic Flowmeter, Magnetic flow meter, rotameter.
Temperature Measurement: Electrical methods of temperature measurement, Resistance thermometers,
Thermistors and thermocouples, Pyrometers, thermal cameras
Special Sensors: Chemical Sensors, Hall Effect Sensors, Optical Light sensors, Tactile/Touch sensors, Cameras
and image analysis
Electrical Actuating systems
DC motors: Review of DC motor, Modeling of DC motor behavior, Heat dissipation in DC motor, Velocity
Profile Optimization, Inertia matching, Servo Amplifier, DC motor drive.
Stepper Motors: Characteristics of a Stepper motor, Classification of a Stepper motor, Principle of Operation,
Step Angle, Electrical model of energized coil, Drive method, Stepper motor performance
Induction motors: Three phase motor, induction motor characteristics
Linear Actuators: Voice Coil Actuators, solenoids
Pneumatic and Hydraulic actuating systems
Components of pneumatic and hydraulic systems, pumps, compressor, filter, control valves, pressure regulation,
relief valves, accumulator.
Harmonic drive, Comb drive.
Smart Material Actuators: Piezoelectric transducers, Electroactive polymers, Shape Memory alloys, Artificial
Muscle materials
Consideration during with actuator selection: Actuator bandwidth and frequency response, actuator range,
power and energy considerations, tradeoffs between force/displacement or torque/speed, control systems and
electronics, industrial considerations
References:
1. Sensors and Actuators: Control System Instrumentation -Clarence W Silva, CRC Press USA
2. Sensors and Actuators in Mechatronics: Design and Applications: Andrzej M Pawlak, CRC Press USA
3. Measurement Systems (Applications and Design) 5th ed.- E.O. Doebelin - McGraw Hill.
4. Mechanical Engineering Measurement - Thomas Beckwith, N.Lewis Buck, Roy Marangoni - Narosa
Publishing House, Bombay.
5. Mechanical Engineering Measurements - A. K. Sawhney – DhanpatRai & Sons, New Delhi.
6. Instrumentation Devices & Systems - C.S. Rangan & G.R.Sarrna - Tata McGraw Hill.
7. Instrumentation & Mechanical Measurements - A.K. Thayal.
8. Optomechatronics: Fusion of Optical and Mechatronics Engineering By Hyungsuck Cho
9. Smart Structures: Analysis and Design, AV Shrinivasan and D Micheal Macfarland. Cambridge
University Press
10. Smart Materials and Structures: MV Gandhi and BS Thomson. Chapman and Hall
54
3. To study the concept of stability and criteria for stability and solve the problem based on it
4. To study the frequency response through polar plot.
5. To study the compensation technique used to stabilize the system
Course Description:
Introduction to Control System and components
Introduction to basic terms, classifications & types of Control Systems, Block diagrams & Signal flow graphs;
Transfer function- determination of transfer function using block diagram reduction techniques. Determination
of transfer functions of thermal, fluid, and mechanical spring-mass-damper system. Mason‘s Rule, Signal-Flow
Graphs of State Equations.
Time –Domain Analysis and Response
Modeling in the Time Domain: General State-Space Representation, Applying the State-Space Representation,
Converting a Transfer Function to State Space, Converting from State Space to a Transfer Function.
Time Domain Response: Introduction, Poles, Zeros, and System Response, Time domain performance
specification First-Order Systems, Second-Order Systems: General Second-Order System, Underdamped
Second-Order Systems, System Response- with additional Poles, with Zeros; Steady state errors and static error
constants in unity feedback control systems, Static Error Constants and System Types; Steady-State Error for
Non-unity Feedback Systems; Limitations of time domain analysis. Laplace Transform Solution of State
Equations.
Root Locus Method
Introduction, Defining the Root Locus, Properties of the Root Locus, Sketching the Root Locus, Transient
Response Design via Gain Adjustment, Generalized Root Locus, Root Locus for Positive-Feedback Systems,
Pole Sensitivity, Design with Root Locus, Improving Steady-State Error and transient response via Cascade
Compensation.
Frequency Response Analysis
Asymptotic Approximations: Bode Plots, Polar Plots; Stability Analysis-Gain Margin and Phase Margin with
Bode Plots, Closed-Loop Transient and Open-Loop Frequency Responses, Relation Between- Closed-Loop
Transient and Closed-Loop Frequency Responses, Steady-State Error Characteristics from Frequency Response.
Stability & Compensation Techniques
Stability: Concepts, absolute, asymptotic, conditional and marginal stability, Routh-Hurwitz Criterion, Special
Cases, of Routh-Hurwitz Criterion: Stability in State Space, Stability analysis with Root locus technique.
Compensation- Physical Realization of compensation. Concepts, series/parallel/series-parallel/ feedback
compensation, Lag/Lead/Lag-Lead networks for compensation
Analog and Digital Control
Analog and Digital Control:
Introduction to Digital control systems, comparison with analog control systems, Case study of analog control
system design with practical approach- Temperature Control system.
Implementation of Digital controller in- Temperature Control System and Digital Power Supply, Digital Signal
controller based Implementation technique.
References:
1. Norman S. Nise, ―Control System Engineering‖, John Wiley & Sons, Inc, Sixth Edition
2. B. C. Kuo, ―Automatic Control System‖, Prentice Hall of India, Seventh edition, 2001.
3. Nagraath Gopal ―Control Systems Engineering -Principles and Design‖ New Age Publishers
4. M. Gopal, "Modern Control System Theory", Wiley Eastern Ltd., New Delhi.
5. K. Ogata, "Modern Control Engineering", 3 ed. Prentice Hall of India (P) Ltd., New Delhi.
6. Dr. K.P. Mohandas, ―Modern Control Engineering‖, revised edition, Sanguine Publishers, Bangalore,
2006.
55
8051 Microcontroller
Architecture: Features, architecture and pin configurations, CPU timing and machine cycle, Input / Output
ports, Memory organization, Counters and timers, Interrupts, Serial data input and output
8051 Assembly Language Programming: Instruction set, Addressing mode, Assembler directives and
programs
8051 Interfacing: LED, LCD, seven segment display, keyboard, ADC, DAC, Stepper Motor, Relay and Serial
Communication
ARM7: A 32-bit Microcontroller
Architecture: Features of ARM Microcontroller, Operating modes, Architecture, Registers, CPSR, Pipeline,
Exceptions, interrupt vector table, memory management, ARM7 processor families
ARM7 Programming: Instruction set, Addressing mode and programs
Embedded Software Development
Assemblers, linkers and loaders. Binary file formats for processor executable files. Typical structure of timer-
interrupt driven programs. GNU-GCC compiler introduction, programming with Linux environment and gnu
debugging, gnu insight with step level trace debugging, make file interaction, building and execution.
Embedded C-programming concepts: Optimizing for Speed/Memory needs, Interrupt service routines,
macros, functions, modifiers, data types, device drivers
Real Time Operating System
Real Time Operating System Concepts, Kernel Structure, Critical Sections, Multitasking, Task
Management, Time Management, Schedulers, Event Control Blocks, Priorities, Deadlocks, Synchronization,
Semaphore Management, Mutual Exclusion, Message Mailbox Management, Message Queue Management,
Memory Management, RTOS implementation.
Example of OSs for embedded systems - RT Linux.
Low power hardware design and applications of Embedded Systems
MSP 430: Features, architecture and programming
Case Studies:
-Consumer and Home
- Industrial and Automation
- Medical
- Robotics
- Security and communication
- Image processing
References:
1. Microprocessor architecture and applications with 8085: By Ramesh Gaonkar (Penram International
Publication).
2. M. A. Mazidi, J. G. Mazidi and R. D. Mckinlay, ―The 8051 Microcontroller & Embedded systems‖,
Pearson Publications, Second Edition 2006.
3. C. Kenneth J. Ayala and D. V. Gadre, ―The 8051 Microcontroller & Embedded system using assembly
& ‗C‘ ‖, Cengage Learning, Edition 2010.
4. Andrew Sloss, Dominic Symes, and Chris Wright, ―ARM System Developer‘s Guide‖ Morgan
Kaufmann Publishers, First Edition 2004.
5. James A. Langbridge, ―Professional Embedded Arm Development‖, Wrox, John Wiley Brand& Sons
Inc., Edition 2014
6. Frank Vahid and tony Gavages ―Embedded system design – A unified hardware / software
introduction‖, Wiley publication, Third edition 2002.
7. Embedded/Real-Time Systems: Concepts, Design & Programming – Dr. K. V. K. K. Prasad,
Dreamtech Press, India.
8. Rajkamal, Embedded Systems - Architecture, Programming and Design, Tata McGraw Hill, Second
edition, 2009
56
Hardware concepts related to OS, Difference between 32-bit and 64 –bit operating system.
CPU states, I/O channels, microprogramming
Process Management and Memory Management:
The concept of a process, operations on processes, process states, concurrent processes, process control block,
process context.
Use of threads and Processes in Operating Systems and difference between them.
UNIX process control and management, PCB, signals, forks and pipes.
Interrupt processing, operating system organization, OS kernel FLIH, dispatcher.
Concurrency, Context switching, Synchronization and Race condition in Operating System.
Interprocess Communication, Usage of semaphores, Classic Syncronization Problems, Alternative to
semaphores.
CPU scheduling, goal of CPU scheduling, Difference between pre-emptive and non-preemptive scheduling.
CPU scheduling algorithm.
Concepts of deadlock prevention and avoidance, detection and recovery.
Memory hierarchy, Interaction of Operating System with Memory, working of Virtual Memory, three
algorithms of dynamic memory allocation. Methods of memory access. Paging and Page replacement algorithm.
Concept of segmentation
File Management:
File organization: blocking and buffering, file descriptor, directory structure. File and Directory structures,
blocks and fragments, directory tree, inodes, file descriptors, UNIX file structure. Concept of I/O management
Real time operating systems :
Introduction, Scheduling Real-time task, thread and Process, Introduction to mucos and Vxworks operating
systems, features of operating systems, applications of operating systems, embedded system, VoIP, Fault
tolerant Application and control systems, Comparison between mucos & Vxworks
Case Study:
UNIX/Linux OS: Commands Related to Shell, File systems, Process management, Memory Management,
Filters and File permission
References:
1. Maurice J. Bach, ―The Design of Unix Operating System‖, Prentine Hall
2. Silberschatz A., Galvin P., and Gagne G, ―Operating Systems Concepts‖, VIIIth Edition Wiley.
3. Tanenbaum, ―Modern Operating Systems‖, IIIrd Edition, PHI
2. William Stallings, ―Operating System-Internal & Design Principles‖, VIth Edition, , Pearson
3. Rajkamal ― Embedded Systems‖ TMH Publication
4. Dr.K.V.K.K. Prasad ― Embedded Real time systems‖
57
Modeling of Single Degree of Freedom Dynamic System Longitudinal, gransverse, torsional vibration
system, Methods for formulation of differential equations by Newton, Energy, Lagrangian and Rayleigh‘s
Method.
Free Un-damped and damped Single Degree of Freedom Vibration System
Free vibration of undamped translation and torsional systems.
Free vibration of viscous damped system – under damped, critically damped, over damped; Logarithmic
decrement; Coulomb‘s damping; Combined viscous and coulomb‘s damping.
Forced Single Degree of Freedom Vibratory System
Analysis of linear and torsional systems subjected to harmonic force excitation and harmonic motion excitation
(excluding elastic damper).
Vibration Measurement and Control:
Vibration Control:
Force Transmissibility, Motion Transmissibility. Vibration isolation with rigid, flexible, and partially flexible
foundation, shock isolation, Typical isolators and Mounts. Undamped dynamic vibration absorber, Damped
dynamic vibration absorber, active vibration control.
Vibration Measurement :
Vibration pickups: Principle of seismic instruments, vibrometer, accelerometer, phase distortion, filters. Sensor
characteristics, transducer response to transient inputs, accelerometer cross-axis sensitivity, calibration,
environmental factors, Basic processes and operating principle of a digital frequency analyser.
Introduction to Conditioning Monitoring and Fault Diagnosis:
Vibration severity criteria, Machine maintenance techniques, machine conditioning monitoring techniques,
vibration monitoring techniques, instrumentation systems, choice of monitoring parameter.
Balancing:
Static and dynamic balancing of rotating masses, balancing of single and multi-cylinder engines, balancing of
linkages, balancing machines, balancing of discs and rotors.
References:
1. Theory of Machines - Thomas Bevan - C. B. S. Publishers
2. Theory of Machines - S. S. Ratan - Tata McGraw Hill
3. Theory of Machines - P. L. Ballaney, Khanna Publishers, Delhi
4. Dynamics of Machines – Norton, McGraw Hill Publication
5. Theory of Mechanisms and Machines - A. Ghosh and A. Malik - Affiliated East – West Press Pvt. Ltd.,
New Delhi
6. Theory of Machines - W. G. Green – Bluckie & Sons Ltd.
7. Mechanics & Dynamics of Machinery - J. Srinivas, Scitech
8. Kinematics, Dynamics and Design of Machinery, 2nd ed., Kenneth Waldron, Gary Kinzel, Wiley India
Edition.
9. Mechanical Vibrations by S. S. Rao
10. Vibration Testing; Theory and Practice, 2nd Edition, Kenneth G. McConnell, Paulo S. Varoto.
58
1. To understand the importance of NC and CNC technology in manufacturing industry.
2. To understand the application of CAD/CAM systems in generating Part Programmes, in particular for
complex models.
3. To understand and apply the use of various transducers, encoders and feedback devices.
4. Identify and select proper NC tooling‘s.
Course Description:
Numerical Control of Machines
Introduction-NC Machine, CNC Machines, DNC, Advantages and Disadvantages of CNC Machines,
Applications of CNC
Components of Numerical Control System-Basic Components, Programme of Instructions
Classification of Numerical Control Machines
Engineering Analysis of NC Positioning Systems
CNC Control System
CNC motion controller, Linear, circular, parabolic, cubic, helical interpolator, Positioning and contouring
control loops, MCU
Output Transducers
Introduction, positional transducers, optical gratings, encoders, Inductosyns, Magnescales.
Tooling for CNC machines
Introduction, Cutting tools materials, types of cutting tools, tool selection, ISO specifications, clamping systems
in tool holders.
Latest CNC tool materials and manufacturing, Tool probing and presetting, Automatic Pallet Changer (APC)
and Automatic Turret
Changer (ATC), Study of various probes and special tools.
Manual Part Programming – NC Words, Writing Part Programme for lathe Machine and Milling Machine
Part Programming using Subroutines, Do Loops and Canned Cycle – Introduction, Subroutines, Do Loops,
Canned Cycles for Lathe Machine and Milling Machine. Introduction to Parametric Programming
Computer-aided Part Programming – Introduction, Computer-aided Part Programming Languages, APT,
MACROS, Milling Machine Programs
Adaptive control – ACO and ACC systems, Maintenance of CNC Machines, Economics of manufacturing using
CNC machines, CNC Machine and Automation
References:
1. G. E. Thyer ―Computer Numerical Control of Machine Tools‖, Industrial Press Inc., New York
2. Steve Krar, Arthur Gill, ―CNC Technology and Programming‖,MC Graw Hill
3. Kundra, Rao and Tewari, ―Numerical Control and Computer Aided Manufacturing‖ Tata McGraw-
Hill, New Delhi.
4. Mikell P. Groover, ―Automation Production Systems, and CIM, Pearson Education
5. Tilak Raj, ―CNC Technology and Programming‖,Dhanpat Rai Publication.
6. Pabla, B.S. &Adithan, M. ―CNC Machines‖, New Age Publishers, New Delhi
7. Ploywka, John & Gabrel, Stanley, ―Programming of Computer Numerically Controlled Machines‖
Industrial Press Inc., New York.
8. Rapello. Ralph. ―Essentials of Numerical Control‖, Prentice Hall
9. Pollack. Herman, W & Robinson., T. ―Computer Numerical Control‖, Prentice Hall
10. Seams, Warren, ―Computer Numerical Control: Concepts & Programming‖, Delmar Publisher Inc.
New York
59
Principles of interference, concept of flatness, flatness testing, optical flats, optical interferometer and laser
interferometer.
Surface texture measurement: importance of surface conditions, roughness and waviness, surface roughness
standards specifying surface roughness parameters- Ra, Ry, Rz, RMS value etc., surface roughness measuring
instruments – Tomlinson and Taylor Hobson versions, surface roughness symbols.
Screw Thread measurement: Two wire and three wire methods, floating carriage micrometer.
Gear measurement: Gear tooth comparator, Master gears, measurement using rollers and Parkinson‘s Tester.
Special measuring Equipments: Principles of measurement using Tool Maker‘s microscope, profile projector &
3D coordinate measuring machine.
Quality Control
Introduction, definition and concept of quality & quality control, set up policy and objectives of quality control,
quality of design and quality of conformance, compromise between quality & cost, quality cost and planning for
quality.
SQC and SQC tools
Importance statistical methods in QC, measurement of statistical control
variables and attributes, pie charts, bar charts/ histograms, scatter diagrams, pareto chart, GANT charts, control
charts, X chart, X bar charts, R charts, P charts, np charts their preparation, analysis and applications.
Elementary treatment on modern SQC tools.
Sampling Techniques
Sampling inspection and basic concepts, OC curves, consumer & producer risk, single & double sampling plans
and use of sampling tables.
References:
1. Practical Engineering Metrology, K.W.B.Sharp, Pitman Publication
2. Engineering Metrology, K.J.Hume, Kalyani publication
3. Engineering. Metrology, I.C. GUPTA, DhanpatRai Publications.
4. Statistical quality control, A.L. Grant, McGraw Hill International, New York.
5. Engineering. Metrology, R.K.Jain, Khanna Publisher.
6. Metrology,Taher.
7. Statistical Quality control, R.C. Gupta
8. I.S. 919/1963.
9. I.S. 2709/1964.
10. Engineering. Metrology, Hume K.G., M C Donald, Technical &Scientific ,London.
11. Quality Control and Industrial Statistics, – Duncon A.J., D.B. Taraporevela& Co. Bombay.
12. Statistical quality Control, Mahajan M., DhanpatRai& Sons, Delhi.
13. Engineering Metrlogy-2nd Ed.,P. Narayana, Scitech Publication.
14. Metal working & Metrology, P. Narayana et.al ,Scitech Publication.
15. Quality control 7 ed.,D.H. Besterfield Pearson education.
16. Juran's Quality Control Handbook.
60
AC voltage Controllers: Single phase AC voltage controller – on – off control and phase control.
Cycloconverters: principle of operation of single phase step-up and step-down cycloconverters.
DC Drives
DC Drive Operation: Introduction to Four quadrant operation – Motoring, Plugging, Dynamic and
Regenerative Braking.
Control of DC Drive by phase controlled converter: Speed control of DC drives, Single phase, semi/ full
converter drive for separately excited dc motor.
Control of DC Drive by Chopper regulators: Single quadrant, Two –quadrant and four quadrant chopper fed
dc separately excited motors, Continuous current operation, Output voltage and current wave forms, Speed
torque expressions, speed torque characteristics.
AC Drives
Induction Motor Characteristics, Current Source Inverter fed Induction motor drive, Speed control methods:
Stator voltage, Variable frequency, Rotor resistance, V/F control, PWM Control, Closed-loop control.
References:
1. Reshid, M.H., ―Power Electronics – Circuits Devices and Application‖ Prentice Hall International,
New Delhi.
2. J Mohan Undeland and Robbins, ―Power Electronics‖, John Wilry and Sons, New York.
3. P. C. Sen, ―Power Electronics‖, Tata McGraw-Hill, New Delhi.
4. Singh, M.D., Khanchandani, K.B., ―Power Electronics‖, Tata McGraw-Hill Education Pvt. Ltd, New
Delhi.
5. S. K. Mandal, ―Power Electronics‖, McGraw-Hill Education (I) Pvt. Ltd, New Delhi.
6. Vedam Subramanyam, ―Thyristor Control of Electric drives‖, Tata McGraw Hill Publilcations
7. P.S. Bimbhra, Power Electronics, Khanna Publications.
8. Vedam Subramanyam, ―Electric Drives: Concepts & Applications‖, 2nd edition, Tata McGraw Hill
Education, New Delhi.
61
Electro-pneumatic systems, electrical control solenoid valves, Relays, Dominant OFF and Dominant ON circuit,
Electro-hydraulic system, hydro- pneumatic system, Programmable Logic Controller (PLC) in automation:
Basic structure, I/O processing. Ladder logic diagram, PLC for industrial process control, Selection of PLC.
References:
1. A text book on Fluid mechanics and Hydraulic machines: Sukumar Pati, 2012 Tata McGraw Hill.
2. Fluid Power with Applications by Anthony Esposito - Pearson Education 2000.
3. Power Hydraulics by Michael J, Prinches and Ashby J. G, - Prentice Hall, 1989
4. Industrial Hydraulics: Pippenger
5. Vickers Manual on Hydraulics
6. Fluid Mechanics and Fluid Power Engineering by Dr.D S Kumar , Kataria Publishers 2014
7. Fluid Mechanics and Hydraulic machines by Modi & Seth, Standard Publishers Distributors
8. Pneumatic Controls by Joji P, Wiley India Pvt.Ltd
9. Pneumatic Circuits and Low Cos by Fawcett J.R.
10. Fundamentals of pneumatics: Festo series
11. Fundamentals of hydraulics: Festo series
12. Mechatronics, A. Smaili, F. Mrad, OXFORD Higher Education.
13. Mechatronics by K P Ramachandran, G K Vijayaraghavan, M S Balasundaram, Wiley India Pvt.Ltd.
62
Wireless Networks and Mobile Communication Systems
Description of cellular system, Frequency Reuse, Co-channel and Adjacent channel interference, Propagation
Models for Wireless Networks, Multipath Effects in Mobile Communication, Models for Multipath Reception.
Evolution of Modern Mobile Wireless Communication System - First Generation Wireless Networks, Second
Generation (2G) Wireless Cellular Networks, Major 2G standards, 2.5G Wireless Networks, Third Generation
3G Wireless Networks, Wireless Local Area Networks (WLANs), Cellular –WLAN Integration.
References:
1. Kennedy and Davis, ―Electronics Communication System‖, Tata McGraw Hill, Fourth edition.
2. Taub Schilling and Saha, ―Principles Of Communication Systems‖, Tata Mc-Graw Hill, Third Ed.
3. R.K. Shevgaonkar, ―Electromagnetic Waves‖, TATA McGraw Hill Companies, 3rd Edition, 2009.
4. Theodore S. Rappaport, ― Wireless Communications‖, Prentice Hall of India, PTR publication
5. Vijay Garg, ―Wireless Communications & Networking (The Morgan Kaufmann Series in
Networking)‖, Morgan Kaufmann Publishers, 1st Edition
63
Review of Discrete-time signals and systems, Correlation, Frequency Domain Concepts, Analogue to Digital
conversion, Sampling, Quantization, LTI systems described by difference equations , FIR and IIR Filters design,
implementation. Z-transform applications, Discrete Time Fourier Transform, Fast Fourier Transforms (FFT).
Textbook:
John G. Proakis, and D. Manolakis, Digital Signal Processing: Principles, Algorithms and Applications, Prentice
Hall; 4th edition, 2006.
References:-
1. Vinay K. Ingle, John G. Proakis, Digital Signal Processing Using MATLAB, Cengage Learning; 3 rd
edition, 2011.
1. A.V. Oppenheim, R.W. Schafer and J.R. Back, Discrete-time Signal Processing, Prentice Hall; 3rd
edition, 2009.
64
Interfacing pneumatic & Hydraulic systems to PLC, Fixed & Modular PLC (Rack, slot, grouping), PLC
specifications, PLC manufacturers,
References:
1. Process control and Instrument technology, C.D.Johnson, TMH
2. Instrumentation for Process measurement and control , N.A. Anderson, CRC Press
3. Introduction to Programmable Logic Controller, Gary Dunning, DELMAR Cengage Learning.
4. Programmable Logic Controller, Webb, PHI Reference Books
5. Tuning of Industrial control systems, ISA
6. Control valve Handbook, ISA
7. Process Instruments and Controls Handbook, Douglas M. Considine, McGraw-Hill.
8. Process Control, Instrument Engineering Hand book, B.G. Liptak, Butterworth-Heinemann Ltd
9. Programmable Logic Controller, NIIT
10. Fundamentals of Process Control Theory, Paul Murrill, ISA
11. Lessons in Industrial Instrumentation, By Tony R. Kuphaldt, Version 0.4 – Released Jan 11, 2009.
65
MTE4201 Microcontroller and PLC-Based Design: 2(1, 0, 3)
Pre-requisite: ELE3209 Control Systems, ELE3208 Sensors and Actuators, ELE3210 Embedded Systems
Objectives:
1. To introduce the basic features, programming methods and applications of Micro controllers
2. To introduce the design of systems using PLCl.
Course Description:
Introduction to Microcontroller
8051 Architecture:– Memory map - Addressing modes, I/O Ports –Counters and Timers – Serial data - I/O –
Interrupts –Instruction set,, Data transfer instructions, Arithmetic and Logical Instructions, Jump and Call
Instructions , Assembly Language Programming tools.
Microcontroller Programming
8051 Assembly Language Programming- Block transfer, arithmetic operations, Code conversion, Time delay
generation, Interrupt programming, Lookup table techniques
Microcontroller Applications
Interfacing of Keyboards – Interfacing of Display Devices – Pulse measurement – Analog to Digital and Digital
to Analog Converter – Interfacing Hardware Circuit – Serial Data Communication – Network Configuration.
Programmable Logic Controllers
Introduction –– Principles of operation – PLC Architecture and specifications – PLC hardware components
Analog & digital I/O modules , CPU & memory module – Programming devices – PLC ladder diagram,
Converting simple relay ladder diagram in to PLC relay ladder diagram. PLC programming Simple instructions
– Manually operated switches – Mechanically operated a Proximity switches - Latching relays,
Applications of Programmable Logic Controllers
Timer instructions - On delay, Off delay, Cyclic and Retentive timers, Up /Down Counters, control instructions
– Data manipulating instructions, math instructions; Applications of PLC – Simple materials handling
applications, Automatic control of warehouse door, Automatic lubrication of supplier Conveyor belt, motor
control, Automatic car washing machine, Bottle label detection and process control application.
Textbooks:
1. Muhammad Ali Mazdi ,J.G.Mazdi & R.D.McKinlay ―The 8051 Microcontroller& Embedded systems
Using assembly & C ― 2nd Edition Pearson Education , Inc ,2006
2. Udayasankara.v & Mallikarjunaswamy .M.S ,‘8051 Microcontroller, Hardware, Software &
Applications ,Tata McGraw Hill Education Pvt Limited. New Delhi ,2009.
3. Gary Dunning , ‗Introduction to Programmable Logic Controllers‗‘ Thomson Learning, 2001.
References:
1. Singh. B.P., "Microprocessors and Microcontrollers", Galcotia Publications (P) Ltd, First edition, New
Delhi, 1997.
2. Parr, "Programmable Controllers: An Engineers Guide", 3rd Edition, Elsevier, Indian Reprint, 2013
3. Valdes-Perez, Microcontrollers: Fundamentals and Applications with PIC, Taylor & Francis, Indian
Reprint, 2013.
4. Bolton , "Programmable Logic Controllers‖ 5th Edition Newnes, ,2009
66
Transformation, Manipulation & Data Storage
2D & 3D Transformations (Translation, Rotation, & Scaling &
Magnification), Concatenations, Matrix representation, Problems & object oriented programming on
Transformations. Object transformation, mirror transformation, Artificial Intelligence in Design &
Manufacturing, Representation of Knowledge, and Knowledge base Engineering.
NC & CNC Technology
Tape coding & format, Manual Part Programming, Computer Aided Part
Programming, CNC functions & advantages, DNC, adaptive Control, CNC programming concepts, Trends &
new developments in NC, Part programmers job, functions of a post processor, NC part programming
languages, Elements of a APT language, The Macro Statement in APT, NC programming with interactive
graphics. Constructional details of CNC machines, Feedback devices- Velocity & displacement, Machining
Centers and its types, Automated Material Handling & storage Systems like Robots, AGVs and AS/RS etc.
Computer Aided Engineering (CAE)
Fundamentals of computer aided engineering,
CAE includes mass property calculations, kinematic analysis and animation (movement, visualization,
simulation and FEA). Case study based on modeling and analysis of structural, thermal/fluid, and dynamic
(vibration analysis) system. Parameter optimization.
Computer Integrated Manufacturing & Technology Driven Practices
Introduction, Evolution, Objectives, CIM Hardware and Software, CIM
Benefits, Nature and role of the elements of CIM, Identifying CIM needs, Data base requirements of CIM, Role
of CAD/CAM in CIM, Obstacles to Computer Integrated Manufacturing, Concept of the future CIM systems,
Socio -techno- economic aspects of CIM.
Rapid Prototyping and Tooling
Introduction to RP, Technology Description, Overview of RP, Benefits
and Application. RP Processes: Process overviews, STL file Generation, Classes of RP systems: Stereo-
lithography Approach (SLA), SLA with photo-polymerization (mathematical modelling of the process), SLA
with liquid thermal polymerization, Selective Laser Sintering (SLS), Fused deposition modelling, Laminated
object manufacturing, Laser powder forming. Prototype properties: Material properties, colour, dimensional
accuracy, stability, surface finish, machinability, environmental resistance, operational properties.
RP Applications: Design, Concept Models, Form & fit checking, Functional testing, CAD data verification,
Rapid Tooling, Rapid manufacturing, Science & Medicine, RP processes for MEMS, Photolithography, Direct
Laser Writer, Bulk Lithography for 3D micro fabrication (Modelling of beam propagation and curing in resin
system).
References:
1. ―CAD/CAM Computer Aided and Manufacturing‖ by Mikell P. Groover and Emory W. Zimmers, Jr.,
Eastern Economy Edition
2. ―CAD/ CAM , Theory & Practice‖ by Ibrahim Zeid, R. Sivasubramanian, Tata McGraw Hill
Publications
3. ―Computer Graphics‖ by Donald Hearn and M. Pauline Baker, Eastern Economy Edition
4. ―CAD/CAM Principles, Practice and Manufacturing Management‖ by Chris McMahon, Jimmie
Browne, Pearson Education
5. ―CAD/CAM/CIM‖ by P. Radhakrishan, S. Subramanyan, V. Raju, New Age International Publishers
6. ―CAD/CAM Principles and Applications‖ by P.N. Rao, Tata McGraw Hill Publications
7. ―Principle of Computer Graphics‖ by William .M. Neumann and Robert .F. Sproul, McGraw Hill Book
Co. Singapore.
8. David L. Goetsch, Fundamental of CIM technology ,Delmar publication
9. David Bedworth, Computer Integrated Design and Manufacturing, McGraw Hill.
10. ―CNC Machines‖ by B.S. Pabla and M. Adithan, New Age International Publishers.
11. ―Numerical Control and Computer Aided Manufacturing‖ , T.K. Kundra, P.N. Rao, N.K. Tiwari, Tata
McGraw Hill
12. ―CNC Technology and Programming‖, Krar, S., and Gill, A., McGraw Hill publishers
13. ―Computer Integrated Manufacturing- An Introduction with Case Studies‖ by Paul G. Ranky, Prentice
Hall International
14. ―Flexible Manufacturing Systems‖ by H.K. Shivanand, M.M. Benal, V.Koti, New Age International
Publishers
15. "Automation, Production Systems and Computer Integrated Manufacturing ", Groover M.P., Prentice-
Hall of India Pvt. Ltd
16. ―Mathematical Elements for Computer Graphics‖, Rogers D F I and Adams J A, McGraw-Hill.
17. ―Computer Integrated Manufacturing Hand Book‖ by Eric Teicholz, Joel N. Orr, McGraw Hill
International Editions
67
18. ―Rapid Prototyping‖ Chee Kai Chua World Scientific Publishing
19. ―Rapid Prototyping: Principles and Applications‖ Rafiq Noorani, Wiley
20. ―Rapid Prototyping: Principles and Applications‖ C.K. Chua, K. F. Leong, C.S. Lim
68
14. Production Planning and Inventory Control by S.L.Narasimhan and other. Prentice Hall
69
Prototyping Hardware-in-the-loop Simulation, Deployment/Life Cycle, Deployment of Embedded Software,
Life Cycle Optimization.
Advance Approaches in Mechatronics: Servo control, Process Control, Supervisory Control, Shop Floor
Control, Plant Control.
Design of Autonomous Mobile Robot: Introduction, Mechanical Design Alternatives (Gearhead DC Motors,
Modified Servo Motors, Skid Steering, Explicit Steering), Design Specifications (Drive Motor Sizing, Steering
Motor Sizing, Gear System, Kinematic Analysis, Mechanical Constructions), Electronic Circuits and Interfacing
(Sensors, Serial Communication Circuit, Robot Circuitry, Motor Driving Circuitry, Communication Strategy,
Interfacing the Servo Steering Motor), Software Development (Serial Communication Algorithm, Data
Collection, Motion Algorithm, Map Generation).
Design of cantilever beam vibration control system based on piezo sensors and actuators: Introduction,
Modeling of the Cantilever Beam and PZT Actuator (Modeling of the Beam, Modeling of the PZT Actuator,
Modeling of the Sensor), Beam Experimental Setup (properties and dimensions of the beam, dimensions and
bonding techniques), instrumental setup (Charge amplifier, Voltage amplifier, Data Acquisition), Controller and
Software (Development of the PID VI),
Design of Photopolymerization based CAD compatible stereo 3D Printer: Working principle and process
plan of Scanning type and Projection type of 3D printer. Components of scanning and projection type printer.
Laser system, Dynamic mask mirror, Optical modulator, scanning mechanisms, Slicing, scan path and image
projection strategies. Selection of actuator for scanning mechanism, optical sensors and its selection criteria.
Layer preparation system. Interfacing of the sensors and actuators. Data communication schemes for projection
and scanning systems. System identification and controller design (PID).
References:
1. Mechatronics, Kenji Uchino and Jayne R. Giniewicz, publication: Marcel Dekker, Inc.
2. Applied Mechatronics- A. Smaili and F. Mrad, OXFORD university press.
3. Mechatronics System Design , Shetty and Kolk CENGAGE Learning, India Edition
4. Introduction to Mechatronics and Measurement Systems , Alciatore and Histand Tata McGraw-Hill
5. Mechatronics, Necsulescu, Pearson education.
6. Mechatronics - Electromechanics and Control Mechanics , Mill Springer-Verlag
7. Mechatronics - Electronic Control Systems in Mechanical Engineering , Bolton Pearson eduaction
8. Mechatronics - Electronics in products and processes , Bradley, et al. Chapman and Hall
9. Mechatronics - Mechanical System Interfacing , Auslander and Kempf, Prentice Hall
10. Introduction to Mechatronics, Appu Kuttan K.K., OXFORD Higher Education
11. The Art of Electronics, Horowitz and Hill Cambridge, University Press
12. Electromechanical Design Handbook , Walsh, McGraw-Hill
13. Electro-mechanical Engineering - An Integrated Approach , Fraser and Milne
14. Handbook of Electromechanical Product Design , Hurricks Longman, John Wiley, Addison Wesley
15. Understanding Electro-Mechanical Engineering - An Introduction to Mechatronics , Kamm IEEE
16. Modeling and control of Dynamic Systems, Macia and Thaler, CENGAGE Learning, India Edition
17. Computer Numerical Control of Machine Tools: Thyer. G.R.
18. Automatic Control Engineering: Francis. H. Raven.
19. Mechatronics, Nitaigour Mahalik, Tata McGraw-Hill
20. Mechatronics, HMT
21. System Identification: Theory for the User (2nd Edition) , Lennart Ljung
22. Design with Microprocessors for Mechanical Engineers, Stiffler McGraw-Hill
70
• Concept of sensors & actuators,
• Sensing & Actuation principles: Mechanical Sensing, Capacitive,
Electrostatic, Electromagnetic, Piezo Resistive, Piezo Electric, Thin Films, Shape Memory Alloys
• Comb Drive Actuation & Sensing. Micro-mechanisms, Air-Bag Sensors, Chemical Sensors
• Sensors & Actuators for Automotive, Biomedical, Industrial applications
Fabrication Methods
Microfabrication Methods (VLSI Techniques)
• Positive and Negative Photoresists,
• Bulk Micromachining,
• Surface Micromachining,
• Etching (Isotropic and Anisotropic),
• Deposition techniques such as CVD (Chemical Vapor Deposition),
Metallization Techniques.
3D High Aspect Ratio Techniques
• LIGA,
• Microstereolithography,
• IH-Process,
• Ion-beam Lithography
Bulk Lithography (layer-less 3D microfabrication)
Modelling and Simulation Techniques
• Scaling Laws, Governing Equations
• Modelling of Mechanical Structures via classical methods, Newtons Laws, Thermal Laws, Fluid Flow
Analysis
• Micro-mechanism modelling and analysis techniques : Lumped Parameter Modelling and Distributed
Parameter Modeling
• Modelling of Micro-channel as heat exchanger, accelerometers
• Numerical Methods used for analysis of MEMS.
Characterization Techniques
Topography Methods (Optical, Electrical and Mechanical Methods)
• Microscopy, STM (Scanning Tunneling Microscopes),
• SEM (Scanning Electron Microscopes), AFM (Atomic Force Microscopes)
Mechanical Structure Analysis
• Deformation & Vibration Measurement Techniques (Piezo resistive and piezo electric)
Interferometry Techniques,
• ESPI (Electronic Speckle Pattern Interferometry),
• Laser Techniques, Laser Doppler Vibro-meters,
Fluid, Thermal and Chemical Techniques
• Fluid Flow Pattern Analysis, Electro-chemical Analysis,
• PIV Techniques
• Spectroscopy
Introduction to Nanotechnology
• CNT (Carbon Nano Tubes) Applications, its properties, and Fabrication Method,
• Nano-mechanical Systems (NEMS),
• Nano-tribology, & nano-indentation techniques,
• Domestic and Industrial Applications of nanotechnology.
References:
1. Julian W. Garden, Vijay K. Varadan and Osama O. Awadelkarim ―Microsensors MEMS and Smart
devices‖, John Wiley and sons, Ltd.
2. Nadim Mulaf and Kirt Williams, ―An Introduction to Microelectromechanical systems Engineering‖,
Artech House.
3. Nicolae Lobontiu and Ephrahim Garcia, ―Mechanics of Microelectromechanical systems‖, Kluwer
Academic Publication.
4. Stanley Wolf and Richard Tauber, ―Silicon Processing for the VLSI era Volume -1 Technology‖,
Lattice press.
5. Vijay K. Varadan, K.J.Vinoy and S. Gopalkrishnan, ―Smart Material Systems and MEMS: Design and
Development Methodologies‖, John Wiley and sons Ltd.
6. Bhushan, ―Springer Handbook of Nanotechnology‖, Springer Inc.
71
MTE5208 Medical Mechatronics: 3(2, 1, 2)
Pre-requisite: ELE3106 Application of Integrated Circuit, ELE4214 Instrumentation and Controller Design
Objectives:
1. To teach the significance of biomedical signal and the challenges in picking the signal
2. To educate students the different mechanism to measure and monitor different biomedical parameters
3. To identify different types of biomedical units such as pathological, diagnostic, therapeutic and
prosthetic devices.
4. To help students in enhancing their knowledge about different imaging techniques
5. Mechanical design of the electrodes, prosthetic devices and the miniature as well as EMI /RFI
protected cabinet is a major challenge to be looked into by this course.
Course Description:
Sources of Bioelectric potential, Electrodes and Transducers
Understand generation of electrical signal in human cell, Resting and Action potential
Different types of Electrodes, Electrolytes and their significance, Biosensors
Classification of Biomedical Instruments
Biopotential Amplifiers and recorders
The origin of bio-potential, ECG, ENG, EMG, EEG, MEG, ERG etc. The signal conditioners and amplifiers
Recording systems for the bio-potential listed above and patient monitoring system, Foetal heart rate monitor
Measurement and analysis techniques
Blood flowmeters, Cardiac output measurement, pulmonary function analysers
Blood gas analysers, oximeters, Blood cell counters, Audiometers
Therapeutic and Prosthetic Equipments
Cardiac Pacemakers, Cardiac defibrillators, Hemodialisis machine, Electrosurgical unit, Ventilators, Infant
incubator, drug delivery devices,
Orthotic and Prosthetic devices Definition, Need and Classification, Normal Human Locomotion . Gait Cycle,
Biomaterials: Definition, Need and Classification, Biological Testing and Biocompatibility, Upper and Lower
limb Prosthetic devices. Upper and Lower limb Orthotic devices, Study of various biomaterials and applications
Fundamentals of medical imaging
X-ray computed Tomography, Spiral or Helical C T: Slip Ring Technology, C T Angiography. Clinical use &
Biological effects and safety, Magnetic resonance imaging Biological effects and safety. Nuclear medical
imaging Biological effects and safety, Infrared imaging, Liquid crystal thermography. Microwave hermography.
Endoscopy, gastroscope, bronchoscope, cystoscope, colonoscope, Enteroscope Lithotripsy.
Electrical safety, Telementry and Hospital Information system
Macroshocks and microshocks hazards, electrical safety and EMI/RFI interference and its testing
Biomedical telemetry, wireless and multi patient telemetry
Hospital Information system: Role of database in HIS. Need of Networking in HIS. Overview of Networking,
topologies and its configuration. Structuring medical record to carry out functions like admissions, discharges,
treatment history etc. Computerization in pharmacy & billing. Automated clinical laboratory systems &
radiology information system.
References:
1. Khandpur R. S., Handbook of Biomedical Instrumentation, Tata McGraw Hill, second edition, 2003
2. Carr and Brown, Introduction to biomedical equipment technology, fourth edition, Pearson press, 2003
3. Sujata V. Bhat, Biomaterials, Narosa Publishing House, 2002.
4. W.R.Hendee & E.R.Ritenour, Medical Imaging Physics (3rd eds), Mosbey Year-Book, Inc., 1992.
5. Lesslie Cromwell, Fred J. Weibell, rich J. Pfeiffer Biomedical Instrumentation and Measurements, 2nd
Edition, PHI
6. John G. Webster, Bioinstrumentation John Wiley and sons, 2004
7. Joseph Bronzino (Editor-in-Chief), Handbook of Biomedical Engineering, CRC Press, 1995.
8. L.A.Geddes and L.E.Baker,.Principles of Applied Bio-Medical Instrumentation. John Wiley & Sons
1975.
9. Harold E. Smalley, .Hospital Management Engineering . A guide to the improvement of hospital
management system. PHI.
72
1. To familiarize the students with the significance of robotic system in agile and automated
manufacturing processes.
2. To prepare the students to be conversant with robotic elements/ peripherals, their selection and
interface with manufacturing equipment‘s.
3. To familiarize the students with the basics of robot kinematics.
Course Description:
Introduction:
Automation & robotics, Robotic System & Anatomy Classification, Future Prospects
Robotic Application in Manufacturing:
Material transfer, Machine loading & unloading, Processing operations,
Assembly & Inspectors
Drives:
Control Loops, Basic Control System Concepts & Models, Control System Analysis, Robot Activation &
Feedback Components, Position & Velocity Sensors, Actuators ,Power Transmission Systems.
Robot Kinematics:
Coordinate Frames, Rotations, Homogeneous Coordinates, Arm Equation of Planer Robot, Four axis SCARA
Robot, TCV, Inverse Kinematics of Planer Robot, Four Axis SCARA Robot.
Trajectory Planning & Robot Dynamics:
Manipulator Path Control- Linear, Quadratic and Cubic Interpolation, Work Space Analysis, Robot Dynamics –
Langrangian Dynamics of one and two link robot arm
Programming For Robots: Methods, Robot programme as a path in space, Motion interpolation, level & task
level languages, Robot languages; Programming in suitable languages Characteristics of robot
Machine Vision:
Introduction, Low level & High level vision, Sensing & Digitising, Template Matching, Image processing &
analysis, Segmentation, Edge detection, Object description& recognition, Interpretation, Noises in Image,
Applications.
Robot Intelligence& Task Planning: Introduction, State space search, Problem reduction, Use of predictive
logic, Means -Ends Analysis, Problem solving, Robot Learning, Robot task planning, Robot Vision
Social Issues and Economics of robotics
References:
1. 1.YoremKoren, ―Robotics for Engineers‖
2. J. F. Engelberger, ―Robotics in Practice‖
3. Ulrich Rembolds, ChristialBlume, ―Computer Integrated Manufacturing Technology and Systems‖
4. Ramamurthy, ―Computer Aided Design in Mechanical Engineering‖
5. Mark Spong, ―Robot Dynamics and Control‖, Wiley India
6. John Craig, ―Robotics‖
7. Paul R.P., ―Robot Manipulators: Mathematics, Programming and Control‖
8. Groover and Simmers,―Industrial Robotics‖
9. Ernest Deoblin,―Measurement systems‖
10. Beckwith and Lewisbuck, ―Mechanical Measurements‖
11. K. Ogata,―Modern Control Engineering‖,PHI
12. Benjamin Kuo, ―Automatic Control Systems‖, Wiley India
13. Richard D. KIafter et al, ―Robotic Engineering -an Integrated Approach‖, PHI
14. Spyros G. Tzafestas, ―Intelligent Robotic Systems‖
73
Product architecture.
Industrial design: process, need.
Design Optimization
Design for Manufacturing (DFM) and Design for Assembly (DFA)
Designs for Maintainability.
Designs for Environment.
Design for Robustness: Taguchi Designs & Design of Experiments (DOE).
Process selection: Important types of manufacturing process and their classification.
Process and material selection Methods : AHP and fuzzy approach
Ergonomics approach
Value Engineering / Value Analysis. : definition, methodology- FAST
Case studies.
Design and Process Failure Mode Effect Analysis (FMEA)
Economic analysis: Qualitative & Quantitative.
Rapid prototyping: Viz. Stereo lithography. FDM, SLS etc.
Quality function deployment (QFD)
Case studies
Legal and social issues
Patents and IP acts
References:
1. Karl T Ulrich, Steven D Eppinger , ― Product Design & Development.‖ Tata McGrawhill New Delhi
2003
2. Kevin Otto & Kristin Wood Product Design: ―Techniques in Reverse Engineering and new Product
Development.‖ 1 / e 2004, Pearson Education New Delhi
3. L D Miles ―Value Engineering.‖
4. Hollins B & Pugh S ―Successful Product Design.‖ Butter worths London.
5. A K Chitale & R C Gupta, ―Product Design and Manufacturing‖, PHI, 2012.
74
Future automotive electronic systems, electronic dash board instruments – Onboard diagnosis system
Electric Vehicles
Layout of an electric vehicle, traction motor characteristics, tractive effort
Transmission requirements, vehicle performance, energy consumption, advantage and limitations,
specifications, system components, electronic control system
Transmission Electronics
Multiplexing and De-multiplexing electronically controlled automatic transmission system
References:
1. David A. Johns, Ken Martin, ―Analog Integrated Circuit Design‖ John Wiley & Sons, 2002.
2. M. A. Mazadi and J. C. Mazadi, ―The 8051 Microcontroller and Embedded Systems‖, Pearson
Education, New Delhi
3. Robert Bosch, ―Automotive Hand Book‖ SAE, 5th edition, 2000.
4. William B.Riddens -Understanding Automotive Electronics, 5th edition- Butter worth Heinemann
Woburn- 1998.
5. Crouse W.H. ―Automobile Electrical Equipment‖ McGraw Hill Book Co., Inc., New York 3rd
edition,1986
6. Mehrdad Ehsani, Yimin Gao, sebastien E. Gay and Ali Emadi, ―Modern Electric, Hybrid Electric and
Fuel Cell Vehicles: Fundamentals, Theory and Design‖, CRS Press, 2004
Elective Courses
Microfabrication Processes
Pre-requisites MEC3109 Manufacturing Processes
Objectives:
1. To gain an understanding of standard microfabrication techniques (fundamental principles) and the
issues surrounding them.
1. To know the major classes, components, and applications of microfabrication.
2. To understand the essentials and constraints of microfabrication processes.
Course Description:
Introduction to microfabrication processes, Additive and subtractive type microfabrication processes.
Advantages and disadvantages of additive and subtractive microfabrication. Applications and scope,
Microfabrication process and its CAD compatibility.
Diffusion, Ion Implantation, Chemical–Mechanical Polishing (CMP). Bonding. Glass Micro processing.
Surface Micromachining, dimensional uncertainties, sealing processes in surface micromachining, IC
compatibility, poly-Si surface micromachining, hinged polysilicon, thick polysilicon, CVD silicon dioxides.
Photolithography overview, masks, spinning resist and soft baking, , exposure and post exposure treatment,
development, post baking, resist, wafer priming, resist stripping, critical dimensions, line width, overall
resolution, resist profile, overview of profile type, lift-off technique, Extreme UV lithography, Pattern
75
Generation, Micro stereo lithography (types: scanning, projection, Integral Hardening, (IH), multi-resist,
constraint surface), bulk lithography
Working Principles of Electro-discharge Machining (EDM), Reverse Micro-EDM, Wire cut EDM, laser
micromachining, Electro-chemical machining.
Dry Etching, Sputtering or Ion Etching, Plasma etching, reaction mechanism, Ion energy vs Pressure
relationship in a plasma. Chemical Etching, Energy driven anisotropy, Dopant driven anisotropy, Deep Reactive
Ion Etching, Comparing dry and wet etching, combining dry and wet etching.
LIGA and Micromolding:
Synchrotron orbital Radiation (SOR), X-ray masks, resist requirement, exposure, development, metal
deposition, molding, demolding, sacrificial layers
References:
1. Sami Franssila, ―Introduction to Micro fabrication‖, Wiley 2nd Edition.
2. Marc J Madou, Fundamentals of Microfabrication, The Science of minituarization, second edition,
CRC press.
3. Yi Qin, Micromanufacturing Engineering and Technology, Micro and Nanotechnology series, Elsevier.
4. Nadim Mulaf and Kirt Williams, ―An Introduction to Microelectromechanical systems Engineering‖,
Artech House.
5. Stanley Wolf and Richard Tauber, ―Silicon Processing for the VLSI era Volume -1 Technology‖,
Lattice press.
6. Vijay K. Varadan, K.J.Vinoy and S. Gopalkrishnan, ―Smart Material Systems and MEMS: Design and
Development Methodologies‖, John Wiley and sons Ltd.
76
2. S.N.Sivanandam, S.N.Deepa "Principles of Soft Computing" Second Edition, Wiley Publication.
3. S.Rajasekaran and G.A.Vijayalakshmi Pai "Neural Networks, Fuzzy Logic and Genetic Algorithms"
PHI Learning.
4. J.-S.R.Jang "Neuro-Fuzzy and Soft Computing" PHI 2003.
5. Satish Kumar "Neural Networks A Classroom Approach" Tata McGrawHill.
6. Zimmermann H.S "Fuzzy Set Theory and its Applications"Kluwer Academic Publishers.
7. Hagan, Demuth, Beale,"Neural Network Design" CENGAGE Learning, India Edition.
77
References:
1. Seshu. P. ―Textbook of Finite Element Analysis‖ Prentice Hall of India, 2003.
2. J.N. Reddy, ―Finite Element Method‖ Tata McGraw Hill, 2003.
3. Chandrupatla and Belegundu, ―Introduction to Finite Elements in Engineering‖ PHI / Pearson
Education, 2003.
4. Logan. D.L. ―A first course in Finite Element Method‖, Thomson Asia Pvt. Ltd., 2002.
5. Cook R.D., Malkus. D.S. Plesha, ME., ―Concepts and Applications of Finite Element Analysis‖, John –
Wiley Sons 2003.
6. S.S. Rao, ―The Finite Element Method in Engineering ―Butter worth Heinemann, 2001.
7. M. Asghar Bhatti, ― FUNDAMENTAL Finite Element Analysis and Applications with Mathematica
and MATLAB Computations‖, Wiley India Pvt. Ltd.
Optimization
Prerequisites: MTH3107 Numerical Methods, MTH2206 Mathematical Methods
Objectives:
1. To familiarize the students with the use of practice oriented mathematical applications for optimization
functions in an organization.
2. To familiarize the students with various tools of optimization, probability, statistics and simulation, as
applicable in particular scenarios in industry for better management of various resources.
Course Description:
Linear Programming: Linear Programming Problem Formulation,
Graphical solution, Simplex method, Twophase method, Big-M method,
Principle of Duality, Dual Simplex, Sensitivity Analysis.
Transportation problem: Formulation - Optimal solution, Degeneracy.
Assignment problem: Formulation - Optimal solution, Traveling Salesman problem.
Sequencing: Introduction - Flow Shop sequencing - n jobs through two machines - n jobs through three
machines - Job shop sequencing - two jobs through ‗m‘ machines.
Replacement: Introduction - Replacement of items that deteriorate with time
- when money value is not counted and counted - Replacement of items that fail completely, group replacement.
Queuing Models: Introduction -Single Channel - Poisson arrivals -
Exponential service times - with infinite population and finite population models, Multichannel - Poisson
arrivals - Exponential service times with infinite population single channel Poisson arrivals.
Game Theory: Introduction - Minimax (Maximin) -Criterion and optimal
strategy - Solution of games with saddle points – Rectangular games without saddle points - 2 X 2 games -
dominance principle - m X2 & 2 X n games, graphical method.
Inventory Models: Introduction - Single item - Deterministic models -
Purchase inventory models with one price break and multiple price breaks - shortages are not allowed -
Stochastic models - demand may be discrete
variable or continuous variable -Instantaneous production - Instantaneous
demand and continuous demand and no set up cost.
Dynamic programming: Introduction - Bellman’s Principle of optimality -
Applications of dynamic programming- capital budgeting problem - shortest path problem – Minimum
Spanning Tree.
Simulation: Definition - Types of simulation models - phases of simulation - applications of simulation -
Inventory and Queuing problems - Advantages and Disadvantages - Simulation Languages.
References:
1. Operations Research: Principle and Practices, A. Ravindran, D. Phillips, Wiley India.
2. Operations Research, S. D. Sharma, KedarNath Ram Nath-Meerut.
3. Operations Research, R. Panneerselvam, PHI Publications.
4. Operations Research, A. M. Natarajan, P. Balasubramani, A. Tamilarasi, Pearson Education
5. Operations Research - An introduction, Hamdy A Taha, Pearson Education.
6. Operations Research, KantiSwarup, P. K. Gupta and Man Mohan, Sultan Chand & Sons.
7. Operations Research: Methods and Problems, Maurice Saseini, ArhurYaspan and Lawrence Friedman.
8. Introduction to O.R, Hiller & Libermann (TMH)
Intelligent Controllers
78
Prerequisites: MTE4201 Microcontroller and PLC-Based Design
Objectives:
On completion of the course the students will be able to understand
1. Concepts of knowledge acquisition.
2. Fundamental of expert system, fuzzy logic and neural controllers with their case studies.
Course Description:
Introduction
Definition – architecture – difference between conventional and expert system.
Knowledge Acquisition
Knowledge representation and formal logic-knowledge engineer – knowledge acquisition techniques – concept
formalization – knowledge representation development – knowledge acquisition for core problem knowledge
acquisition without knowledge engineers.
Expert System Tools
Problem solving start engines – languages for expert system development – expert system shells – LISP
machines – PC – based expert system tools.
Fuzzy Modelling and Control
Fuzzy sets – Fuzzy set operators – Fuzzy Reasoning – Fuzzy propositions – Linguistic variable –
Decomposition and Defuzzification – Fuzzy systems: case studies.
Neural Controllers
Introduction: Neural networks – supervised and unsupervised learning-neural network models – single and multi
layers – back propagation – learning and training. Neural controllers case studies.
Textbooks:
1. Rolston, D.W., Principlesof Artificial and Expert Systems Development, McGraw Hill Book Company,
International Edition.
2. Kosko, B, Neural Networks and Fuzzy Systems, Prentice Hall of India Pvt. Ltd., 1994.
References:
1. Klir, G.J and Folger, T.A. ―Fuzzy Sets, and Information‖, Prentice Hall
2. James A.Freeman, David M. Skapura, ―Neural Networks Algirithms‖, Applications and programming
Techniques‖, Addition Wesley Publishing Company 1992.
79
Inc., 1996.
2. Joseph G. Monks., Operations Management, Theory and Problems, McGraw Hill Book Company, 1982.
3. G.B.S. Narang . and Kumar. V., Production and Planning , Khanna Publishers, 1995.
4. Banga. T.R., and Sharma S.C., Estimating and Costing, Khanna publishers, 1986.
Factory Automation
Prerequisites: MTE4201, MTE4202
Objectives:
On completion of the course the student will be able to understand
1. Many of the automation fundamentals and control techniques.
2. Material handling technologies
3. Manufacturing systems and
4. Manufacturing support systems
Course Description:
Automation – Definition, levels, need, strategies principles. Types of production, functions in manufacturing,
plant layout – types, organization and information processing in manufacturing, Types of flow lines, methods of
transport, transfer mechanisms, ASRS system.
Group Technology and Flexible Manufacturing Systems
Group Technology – Introduction, part families, parts classification and coding system – OPITZ and MI CLASS
system. Production flow analysis, cellular manufacturing – advantages, disadvantages and applications. FMS –
Introduction, workstations, scope, components, types, benefits, typical FMS layout configuration, function of
FMS computer Control System, FMS data files.
Computer Control Systems and Automated Process
Computer control systems – Introduction, Architecture, Factory Communication, Local Area Networks –
Characteristics, factory networks, open system interconnection model. Network to network interconnections,
manufacturing automation protocol, Data Base Management System – Introduction. Computer aided shop floor
control. Automated process planning – introduction, structure, information requirement, CAPP, application,
programs in CAPP.
Computer Controlled Machines and Material Handling Systems
NC machines – Part Programming, CNC, DNC, Adaptive Control, Pallets & Fixtures, Machine centers,
Automated inspection systems. Material handling systems – Introduction, Conveyors, Industrial Robots,
Automated Guided Vehicles.
Computer Integrated Manufacturing
CIM – Introduction, definition, scope, benefits, elements, CIM cycle or wheel. Introduction to Jurt-in-Time
(JIT), Kanban System, Business Process Re-engineering (BPR), Materials requirement planning (MRP),
Manufacturing Resource Planning (MRP II), Enterprise Resource Planning (ERP), Supply Chain Management
(SCM).
Textbooks
1. Mikell Groover .P, Automation, Production Systems and Computer Integrated Manufacturing‖,
Prentice Hall of India Pvt. Ltd., 2001.
2. Viswanathan .N, Navahari .Y ―Performance Modeling of Automated Manufacturing Systems‖, Prentice
Hall of India Pvt. Ltd., 1998.
References
1. Rao .P.N., Computer Aided Manufacturing, Tata McGraw Hill Publishing Co. Ltd., New Delhi, 2001.
2. Kant Vajpayee .S, Principles of Computer Integrated Manufacturing, Prentice Hall of India Pvt. Ltd.,
1995.
3. Radhakrishnan .P, Subramaniyan .S, CAD/CAM/CIM, New Age International Limited, 1994.
80
International Standards of Length and Laser Metrology
Units of length – legal basis for length measurement – Traceability – Characteristics – LASER light source –
LASER interferometer – LASER alignment telescope – LASER micrometer-on-line and in-process
measurements of diameter and surface roughness using LASER – Microholes and topography measurements –
Straightness and flatness measurement.
Co-Ordinate Measuring Machines
Evolution of measurement – co-ordinate measuring machines – Non Cartesian CMMS – Accessory elements –
Application software – Performance evaluations – Temperature fundamentals – Environmental control –
Accuracy enhancement – Applications – Measurement integration.
Optoelectronic Measurements Systems and Development in Metrology
Opto electronic devices, contact and non contact types, Applications in on-line and in-process monitoring
systems – Tool wear measurement – Manufacturing metrology – 3D Surface roughness – Pattern generation
studies – Roundness measurement using LASER.
Image Processing and its Application in Metrology
Shape identification – Edge detection Techniques – Normalization – Grey scale correlation – Template
Techniques – Surface roughness using vision system – Interfacing robot and image processing system –
Measurement of length and diameters.
Computer Integrated Quality Assurance
Total quality control – quality assurance – Zero defects – POKA-YOKE Statistical evaluation of data using
computer data integration of CMM and data logging in computers – TQM.
Textbooks
1. Thomas G.G –Engineering metrology, Butterworth Pub. 1974.
2. Robert .G. Seippel, Optoelectronics for technology and engineering, Prentice Hall New Jersey, 1989.
3. Besterfield .H. Dale, Total quality management, Pearson printice Hall, India,2007
81
3. Robotics Welding
4. Air-conditioning system
5. Smart phones
6. Medical Devices
References:
1. Donald A. Normann, ―Design of everyday things‖, Basic Books; Reprint edition 2002.
2. Wilbert O. Galitz, ―The Essential Guide to User Interface Design‖, Wiley publication.
3. Ben Shneiderman and Catherine Plaisant,: Desinging the user Interface:,Pearson,Addison Wesley.
4. Alan Cooper, Robert Reimann, David Cronin, ―About Face3: Essentials of Interaction design‖, Wiley
publication.
5. Jeff Johnson, ―Designing with the mind in mind‖, Morgan Kaufmann Publication.
6. ―Human-Machine Interface Design for Process Control Applications‖, Jean-Yves Fiset, ISA,2009
7. Dix A. et al., Human-Computer Interaction. Harlow, England: Prentice Hall, 2004, ISBN-10:
0130461091
8. Yvonne Rogers, Helen Sharp, Jenny Preece, Interaction Design: Beyond Human Computer Interaction,
3rd Edition, Wiley, 2011, ISBN-10: 0470665769
9. Guy A. Boy ―The Handbook of Human Machine Interaction‖, Ashgate publishing Ltd.
82
ميحرلا نمحرلا هللا بسم
April 2016
83
Table of contents
Page
SN Item
No.
1 Introduction 3
2 Program objectives 3
3 Duration & Pattern of Course 3
4 Degree Awarded 3
5 Program Outcomes 4
6 Degree Requirements 4
7 Subjects Codes 5
8 Coding Scheme 5
9 Statistical information 6
10 General analysis for the program hours 6
11 Distribution of the program hours 6
12 Time frame for the different subject areas 6
13 Humanities and Social Sciences 7
14 Basic Sciences and Mathematics 7
15 Basic Engineering Sciences 8
16 Applied Engineering Sciences and Design 9
84
Introduction
The Mechanical Engineering (Production) Bachelor of Science program at Sudan
International University is an applied engineering program. Its mission is to provide
graduates the skills and knowledge for successful careers in manufacturing engineering
technology. This program provides students with an aptitude for applied sciences and
mathematics to develop their capabilities and skills and to apply them to a broad range of
problems dealing with manufacturing technology.
Program Objectives
The program educational objectives are to produce graduates who:
1. are able to analyze, design, implement, and maintain practical mechanical and
manufacturing systems.
2. communicate effectively and work well on team-based engineering projects.
3. succeed in manufacturing and mechanical engineering technology positions.
4. pursue continued professional development.
Degree Awarded
B.Sc (Honors) Degree in Mechanical Engineering (Production).
85
Program Outcomes
The Mechanical Engineering (Production) Undergraduate Program is designed to provide
students with the following skills:
1. an ability to select and apply the knowledge, techniques, skills, and modern tools of
the discipline to broadly-defined engineering technology activities;
2. an ability to select and apply a knowledge of mathematics, science, engineering, and
technology to engineering technology problems that require the application of
principles and applied procedures or methodologies;
3. an ability to conduct standard tests and measurements; to conduct, analyze, and
interpret experiments; and to apply experimental results to improve processes;
4. an ability to design systems, components, or processes for broadly-defined
engineering technology problems appropriate to program educational objectives;
5. an ability to function effectively as a member or leader on a technical team;
6. an ability to identify, analyze, and solve broadly-defined engineering technology
problems;
7. an ability to apply written, oral, and graphical communication in both technical and
non-technical environments; and an ability to identify and use appropriate technical
literature;
8. an understanding of the need for and an ability to engage in self-directed continuing
professional development;
9. an understanding of and a commitment to address professional and ethical
responsibilities including a respect for diversity;
10. a knowledge of the impact of engineering technology solutions in a societal and
global context;
11. a commitment to quality, timeliness, and continuous improvement.
Degree Requirements
To obtain the B.Sc. degree in Electrical Power Engineering, the student must successfully
complete 191 credit hours, out of which 20 credit hours represent the University requirement
(humanities and social sciences), 51 credit hours represent the College requirements and 120
credit hours represent the Department requirements. The Departmental requirements are split
into 61 credit hours of compulsory core courses in basic engineering sciences, 53 credit hours
in control systems engineering and 6 credit hour final year project.
86
Subjects Codes
Subject Code
Physics PHY
Chemistry CHM
Mathematics MTH
Training TRN
Coding Scheme
A 3 letter 3 digit (XXX999) coding is adopted:
3 Letters Subject Code
1 Digit Year or Level (1 for 1st Year, 2 for 2nd Year etc…)
1 Digit Semester within the year (1 for 1st Semester, 2 for 2nd Semester)
2 Digits Subject Serial Number
e.g.
MTH3107: Mathematics, 3rd Year, 1st Semester in 3rd Year, 7th Mathematics course
87
Statistical information
General analysis for the program hours
Semester One 18 6 9 33 23
Semester Two 17 8 12 37 23
Semester Three 18 6 9 33 22
Semester Four 16 8 10 34 20
Semester Five 14 8 12 34 20
Semester Six 12 7 8 27 17
Semester Seven 12 5 10 27 17
Semester Eight 12 5 8 25 16
Semester Nine 10 5 14 29 17
Semester Ten 12 6 8 26 16
Total 141 64 000 215 091
88
Humanities and Social Sciences courses
Total 36 23 19 51
89
Basic Engineering Sciences courses
90
Applied Engineering Sciences & Design courses
Total 32 16 54 59
91
Evaluation of the program contents according to the requirements of Sudan
Engineering Council
Total
Contact hours Number Credit hours
Courses Classifications of
Theo. Tut. Prac. contact number %
hours
Basic sciences and
36 23 19 81 51 26.70
mathematics
Applied engineering
32 16 54 013 59 30.89
sciences and Design
Humanities and social
20 0 0 20 20 10.47
sciences
92
Course Plan
Semester 1
Lecture Tutorial Practical Credit
Code Title
Hrs/week Hrs/week Hrs/week Hours
1 خ١ٍِال٦اٌلهاٍبد ا
ISL1101 3 1 1 3
Islamic Studies I
1 خ١اٌٍغخ اٌؼوث
ARB1101 3 1 1 3
Arabic Language I
1 خ٠ي١ٍٔغ٦اٌٍغخ ا
ENG1101 2 1 1 2
English Language I
ٕلٍخٌٙ اٚ اٌغجو
MTH1101 2 2 1 3
Algebra & Geometry
1 ْاٌؾَجب
MTH1102 2 2 1 3
Calculus I
1 بء٠ي١اٌف
PHY1101 2 1 3 3
Physics I
1 بء١ّ١اٌى
CHM1101 2 1 3 3
Chemistry I
ةٍِٛملِخ ؽب
CMP1101 2 1 3 3
Introduction to Computing
Total 01 6 9 32
Semester 2
Lecture Tutorial Practical Credit
Code Title
Hrs/week Hrs/week Hrs/week Hours
2 خ١اٌٍغخ اٌؼوث
ARB1202 3 1 1 3
Arabic Language II
2 خ٠ي١ٍٔغ٦اٌٍغخ ا
ENG1202 2 1 1 2
English Language II
2 ْاٌؾَجب
MTH1203 2 2 1 3
Calculus II
واد اٌّووجخ١اٌّزغ
MTH1204 2 2 1 3
Complex Variables
2 بء٠ي١اٌف
PHY1202 2 1 3 3
Physics II
2 بء١ّ١اٌى
CHM1102 2 1 3 3
Chemistry II
ٕلٍخٌٙىب ا١ٔىب١ِ
MEC1201 2 2 1 3
Engineering Mechanics
ةٍٛثوِغخ ؽب
CMP1202 2 1 3 3
Computer Programming
ُهٚ أػّبي
WST1201 1 1 3 1
Workshop Training
Total 17 8 12 32
93
Semester 3
Total 18 6 9 22
Semester 4
94
Semester 5
Semester 6
95
Semester 7 (Production)
Semester 8 (Production)
96
Semester 9 (Production)
Semester 10 (Production)
97
SN Elective Courses (Production)
1 Project Management
2 Robotics
3 Materials Selection
4 Machine Tool Design
5 Industrial Systems Simulation
6 Micro Electro Mechanical Systems (MEMS)
98
Course Descriptions
)1 ، 1 ، 2(2 : 0 دراسبد إسالهيخISL1101
أهشلدٚ فخ٠خ اٌشو٠ٛ إٌَخ إٌجٚ ُ٠ب اٌموآْ اٌىوٙ١ٌ إٜ ٘لٟخ اٌز١ٌٍٍّ اٌؼ٤فك اٚ ؾخ١خ اٌظؾ١ٍِال٦لح ا١ـ اٌؼم١ٍرو
ٍٝ االؽالع ػ. ) إٌَخٚ ْخ (اٌموا١ٍٍب٤ؼخ ا٠بي اٌّضمفخ ثّظبكه اٌشو١ع٤ هثؾ اٚ ، َ اٌّقزٍفخٍٛ اٌؼٚ ب اٌّؼبهفٙ١ٌإ
. خ١ٍّس اٌؼٛ اٌجؾٚ خ١ٍِال٦ اٌلهاٍبد اٟب فٙ االٍزؼبٔخ ثٚ ف٠ش اٌشو٠ اٌؾلٚ ُ٠خ ٌٍموآْ اٌىو١ثؼغ اٌؾيَ اٌجوِغ
99
Functions of one variable. Concept of limits. Definitions and Techniques of Differentiation.
Derivatives of Trigonometric, Exponential, and Logarithmic Functions. Chain Rule. Implicit
Differentiation. Maximum and Minimum Values. Increasing, Decreasing and Concave
Functions.
Inverse Trigonometric Functions. Hyperbolic Functions. Some Engineering Applications.
II. Integral Calculus of functions of one variable
Definite and Indefinite Integrals. Techniques of Integration: Integration by Substitution,
Integration by Trigonometric Substitutions, Integration by Parts, and Integration by Partial
Fractions. Applications of Definite Integrals in Geometry. Some Engineering Applications.
Textbook:-
James Stewart, Essential Calculus, Early Transcendentals, Cengage Learning; 2nd Edition,
2012.
References:-
5. Robert T. Smith & Roland B. Minton "Calculus", McGraw-Hill, 3rd Edition, 2007.
6. Thomas, ―Calculus‖, Pearson Education, 12th Edition, 2010.
7. Stewart, ―Calculus‖, Thomson, 5th Edition, 2003.
8. Anton- Bivens- Davis, ―Calculus‖, John Wiley, 7th Edition, 2002.
100
8. To acquaint the student with concepts of important photophysical and photochemical
processes and spectroscopy.
9. To develop an understanding of the basic concepts of phase rule and its applications
to single and two component systems and appreciate the purpose and significance of
alloys.
10. To acquaint the students with the basics of nano materials, their properties and
applications.
Polymer Chemistry
Introduction: Classification of polymers – Natural and synthetic; Thermoplastic and
Thermosetting.
Functionality – Degree of polymerization. Types and mechanism of polymerization: Addition
(Free Radical, cationic and anionic); condensation and copolymerization. Properties of
polymers: Tg, Tacticity, Molecular weight – weight average, number average and
polydispersity index. Techniques of polymerization: Bulk, emulsion, solution and suspension.
Preparation, properties and uses of Nylon 6,6, and Epoxy resin.
Chemical Thermodynamics
Terminology of thermodynamics - Second law: Entropy - entropy change for an ideal gas,
reversible and irreversible processes; entropy of phase transitions; Clausius inequality. Free
energy and work function: Helmholtz and Gibbs free energy functions (problems); Criteria of
spontaneity; Gibbs-Helmholtz equation (problems); Clausius-Clapeyron equation; Maxwell
relations – Van‘t Hoff isotherm and isochore(problems).
Photochemistry and Spectroscopy
Photochemistry: Laws of photochemistry - Grotthuss–Draper law, Stark–Einstein law and
Lambert- Beer Law. Quantum efficiency – determination- Photo processes - Internal
Conversion, Intersystem crossing, Fluorescence, Phosphorescence, Chemiluminescence and
Photo-sensitization. Spectroscopy: Electromagnetic spectrum - Absorption of radiation –
Electronic, Vibrational and rotational transitions. UV-visible and IR spectroscopy –
principles, instrumentation (Block diagram only).
Phase Rule and Alloys
Phase rule: Introduction, definition of terms with examples, One Component System- water
system - Reduced phase rule - Two Component Systems- classification – lead-silver system,
zincmagnesium system. Alloys: Introduction- Definition- Properties of alloys- Significance
of alloying, Functions and effect of alloying elements- Ferrous alloys- Nichrome and
Stainless steel – heat treatment of steel; Non-ferrous alloys – brass and bronze.
Nanochemistry
Basics - distinction between molecules, nanoparticles and bulk materials; size-dependent
properties. Nanoparticles: nano cluster, nano rod, nanotube(CNT) and nanowire. Synthesis:
precipitation, thermolysis, hydrothermal, solvothermal, electrode position, chemical vapour
deposition, laser ablation; Properties and applications
Textbooks:
3. Jain P.C. and Monica Jain, ―Engineering Chemistry‖, Dhanpat Rai Publishing
Company (P) Ltd., New Delhi, 2010
4. Kannan P., Ravikrishnan A., ―Engineering Chemistry‖, Sri Krishna Hi-tech
Publishing Company Pvt. Ltd. Chennai, 2009
References:
5. Dara S.S, Umare S.S, ―Engineering Chemistry‖, S. Chand & Company Ltd., New
Delhi 2010
6. Sivasankar B., ―Engineering Chemistry‖, Tata McGraw-Hill Publishing Company,
Ltd., New Delhi, 2008.
101
7. Gowariker V.R. , Viswanathan N.V. and JayadevSreedhar, ―Polymer Science‖, New
Age International P (Ltd.,), Chennai, 2006.
8. Ozin G. A. and Arsenault A. C., ―Nanochemistry: A Chemical Approach to
Nanomaterials‖, RSC Publishing, 2005.
th
9. Zumdahl and Zumdahl, Chemistry, Houghton Mifflin Company, USA, 7 edition,
2007.
102
Differential Calculus of functions of several variables:
Vectors, Vector–Valued Functions, Functions of Several Variables, Partial Derivatives,
Chain Rule, Gradient and Directional Derivatives, Extrema of Functions of Several
Variables, Quadratic Surfaces, Vector Fields and Line Integrals, Double Integrals in
Cartesian and Polar Coordinates, Triple Integrals in Cartesian and Cylindrical and Spherical
Coordinates. Infinite sequence and series, line and surface integral. Basic theorems of vector
calculus (Green‘s Stocks and Divergence). Engineering Applications.
Textbook:-
James Stewart, Essential Calculus, Early Transcendentals, Cengage Learning; 2nd edition,
2012.
References:-
5. Robert T. Smith & Roland B. Minton "Calculus", McGraw-Hill
Science/Engineering/Math; 3rd Edition, 2007.
6. Thomas, ―Calculus‖, Pearson Education, 12th Edition, 2010.
7. Stewart, ―Calculus‖, Thomson, 5th Edition, 2003.
8. Anton- Bivens- Davis, ―Calculus‖, John Wiley, 7th Edition, 2002.
103
Part 1: Electricity and Magnetism; Electric Fields. Gauss's Law. Electric Potential.
Capacitance and Dielectrics. Current and Resistance. Direct Current Circuits. Magnetic
Fields. Sources of the Magnetic Field. Faraday‘s Law. Inductance. Alternating Current
Circuits. Electromagnetic Waves.
Part 2: Light and Optics; The Nature of Light and the Laws of Geometric Optics. Image
Formation. Interference of Light Waves. Diffraction Patterns and Polarization.
Part 3: Modern Physics; Relativity. Introduction to Quantum Physics. Quantum Mechanics.
Atomic Physics. Molecules and Solids. Nuclear Structure.
Textbook:-
3) Hugh D. Young, Roger A. Freedman, University Physics with Modern Physics,
Addison-Wesley; 13th Edition, 2013.
4) Douglas C. Giancoli, Physics For Scientists And Engineers With Modern Physics,
Fourth Edition, Pearson Prentice Hall, 2009.
References:-
Raymond A. Serway and John W. Jewett, Jr., Physics For Scientists And Engineers With
Modern Physics, Seventh Edition, Brooks/Cole-Thomson Learning, 2008.
104
energy conversionsolar cells- wind energy. Batteries and fuel cells:Types of batteries-
alkaline battery- lead storage battery- nickel-cadmium battery- lithium battery- fuel cell H2 -
O2 fuel cell- applications.
Engineering Materials
Abrasives: definition, classification or types, grinding wheel, abrasive paper and cloth.
Refractories: definition, characteristics, classification, properties – refractoriness and RUL,
dimensional stability, thermal spalling, thermal expansion, porosity; Manufacture of alumina,
magnesite and silicon carbide, Portland cement- manufacture and properties - setting and
hardening of cement, special cement- waterproof and white cement–properties and uses.
Glass - manufacture, types, properties and uses.
Fuels and Combustion
Fuel: Introduction- classification of fuels- calorific value- higher and lower calorific values-
coalanalysis of coal (proximate and ultimate)- carbonization- manufacture of metallurgical
coke (Otto Hoffmann method) - petroleum- manufacture of synthetic petrol (Bergius
process)- knockingoctane number - diesel oil- cetane number - natural gas- compressed
natural gas(CNG)- liquefied petroleum gases(LPG)- producer gas- water gas. Power alcohol
and bio diesel. Combustion of fuels: introduction- theoretical calculation of calorific value-
calculation of stoichiometry of fuel and air ratio- ignition temperature- explosive range - flue
gas analysis (ORSAT Method).
TextBooks:
3. Vairam S, Kalyani P and SubaRamesh.,―Engineering Chemistry‖., Wiley India
PvtLtd.,New Delhi., 2011
4. DaraS.S,UmareS.S.―Engineering Chemistry‖, S. Chand & Company Ltd., New Delhi
, 2010
References:
5. 1 Kannan P. and Ravikrishnan A., ―Engineering Chemistry‖, Sri Krishna Hi-tech
Publishing Company Pvt. Ltd. Chennai, 2009
6. AshimaSrivastava and Janhavi N N., ―Concepts of Engineering Chemistry‖, ACME
Learning Private Limited., New Delhi., 2010.
7. RenuBapna and Renu Gupta., ―Engineering Chemistry‖, Macmillan India Publisher
Ltd., 2010.
8. 4 Pahari A and Chauhan B., ―Engineering Chemistry‖., Firewall Media., New Delhi.,
2010
105
3. Ferdinand Beer, E. Russell Johnston, Elliot Eisenberg, David Mazurek, Vector
Mechanics for Engineers: Statics, McGraw-Hill Science/Engineering/Math; 9th
edition, 2009.
4. Ferdinand Beer, E. Russell Johnston, Elliot Eisenberg, Phillip Cornwell, Vector
Mechanics for Engineers: Dynamics, McGraw-Hill Science/Engineering/Math; 9th
edition, 2009.
106
MEC2102 Engineering Drawing I : 3(2, 0, 3)
Prerequisite:- None
Objectives:
3. To provide the student with the experience of geometrical construction and sketching.
4. To provide the student with the principles of orthographic projection, sectional views,
auxiliary views, and writing dimensions.
Description:-
Engineering drawing introduction, types of lines, size of drawing papers, layouts of drawing
sheets, graphics instruments, scales, geometrical construction, orthographic projection,
sectioning, dimensioning, pictorial drawing, conventions. Descriptive geometry locus of a
point, Mange‘s projection, straight line (particular positions), the plane, auxiliary planes, the
positional problems, projection of circle, curved surfaces, intersection of surfaces of
revolution, perspective projection.
Textbook:
Thomas, E.E., Charls, J.V., and Robert J.F., Engineering Drawing and Graphic Technology,
14th edition, McGraw-Hill, 1993.
References:
Colin H., Simmons and Dennis E. Maguire, Manual of Engineering Drawing, 2nd edition,
2004, Elsevier Newnes, Linacre House, Jordan Hill, Oxford OX2 8DP, 200 Wheel Road,
Burlington MA 01803.
107
To provide the student with the principles of mechanics of materials used in most engineering
applications.
Description:-
Introduction, Stress, strain; Hook's law. Moduli of elasticity and rigidity, and Poisson's ratio.
Statical determination of axial force, shear force, bending moment and torque in bars, beams
and circular shafts. Load-shear-moment relationship in beams. Section kinematics; strain and
stress distribution and their resultants. Normal and shear stress distributions in beams of
different shapes. Transformation of stress and strain, Mohr's circle. Spherical and cylindrical
pressure vessels. Elastic buckling of columns.
Textbook:-
Ferdinand Beer, E. Russell Johnston, John DeWolf, David Mazurek, ―Mechanics of
Materials‖, McGraw-Hill Science/Engineering/Math; 6th edition (January 4, 2011).
108
Electronic Materials: Band structure of solids. Conductivity of metals and alloys.
Semiconductors and superconducting materials. Insulators and dielectric properties.
Electrostriction, piezoelectricity and ferroelectricity.
Photonic Materials: Refraction, reflection, absorption and transmission. Luminescence,
Photoconductivity, Lasers, optical fibers in communications.
Magnetic Materials: classification of magnetic materials. Diamagnetic, paramagnetic,
ferromagnetic, ferrimagnetic and super paramagnetic materials. Metallic and ceramic
magnetic materials. Applications of magnetic materials.
Ceramics: Definition, comparative study of structure and properties of Engineering
Ceramics with reference to metallic materials. Toughening mechanisms in ceramics.
Engineering application of Ceramics.
Polymers: Classification of polymers. Thermoplastics, effect of temperature on
thermoplastics, mechanical properties of thermoplastics. Thermosetting polymers and
elastomers.
Composites: Definition; Classification; Particle-reinforced composites and fibre-reinforced
composites. Rule of mixtures; Sandwich structures. Classification of composites on basis of
matrix materials.
Nano-structured Materials: Definition and Introduction to nano- technology. Unique
features of nano-structured materials. Typical applications.
Modern Engineering Materials: Smart materials, Shape memory alloys, Chromic materials
(Thermo, Photo and Electro), Rheological fluids, Metallic glasses.
References:
8. The Science and Engineering of Materials (6 th Edition), by Donald R. Askeland,
Pradeep P. Fulay, Wendelin J. Wright, Cengage Learning, Inc., Stamford, USA.,
(2010)
9. Materials Science and Engineering: An Itroduction (8th Edition), by William D.
Callister, Jr. – Adapted by R. Balasubramaniam. Wiley India (P) Ltd., (2010).
10. Introduction to Physical Metallurgy (2nd Edition), by S H Avner, Tata McGraw Hill
(1997).
11. A Text Book of Nanoscience and Nanotechnology, by Pradeep.T, Tata McGraw Hill,
New Delhi, (2012).
12. Material Science, by S.L. Kakani, New Age International, (2006).
13. Electronic Properties of Materials (4th Edition), by Rolf.E. Hummel, Springer, New
York, (2011).
14. Photonic Crystals: Theory, Applications, and Fabrication, by Dennis W Prather, John
Wiley & Sons, Hoboken, (2009).
109
parallel circuits, phasor diagrams, power and power factor, series and parallel resonance, Q-
factor and bandwidth
Three phase circuits:
Three phase voltage and current generation, star and delta connections (balanced load only),
relationship between phase and line currents and voltages, Phasor diagrams, Basic principle
of wattmeter, measurement of power by two wattmeter method
Time Domain Analysis of RLC circuits
Time domain analysis of R-L and R-C circuits: Forced and natural response, time
constant, initial and final values
Solution using first order equation for standard input signals: Transient and steady state
time response, solution using universal formula
Time domain analysis of R-L-C circuits: Second order forced and natural response and
concept of damping
Frequency domain analysis of RLC circuits
S-domain representation, applications of Laplace Transform in solving electrical networks,
driving point and transfer function,
Poles and Zeros, calculation of residues by analytical and graphical method
Frequency response
Text Books
6. V. N. Mittal and Arvind Mittal ―Basic Electrical Engineering‖ Tata McGraw Hill,
(Revised Edition)
7. Electrical Engineering Fundamentals" by Vincent Del Toro, PHI Second edition
,2011
8. Electronics Devices & Circuit Theory" by Boylestad, Pearson Education India
9. Edward Hughes: Electrical and Electrical Technology, Pearson Education (Tenth
edition)
10. D P Kothari and I J Nagrath ―Theory and Problems of Basic Electrical Engineering‖,
PHI 13 th edition 2011.
Reference Books:
3. B.L.Theraja ―Electrical Engineering ― Vol-I and II,
4. S.N.Singh, ―Basic Electrical Engineering‖ PHI , 2011
110
Ordinary differential equations. Linear equations: Solution space, linear independence,
Wronskians, normal forms. Eigenvalue problems: importance of boundary conditions, formal
and true self-adjointness, completeness of eigenfunctions, Fourier series, continuous spectra
and Fourier integrals. Green Functions: Range-nullspace theorem, Fredholm alternative,
constructing Green functions via jump conditions.
Partial Differential equations. Classification of PDE's. Hyperbolic equations: wave
equation, method of characteristics, shocks and weak solutions. Heat equation: solution by
integral transforms. Elliptic equations: Dirichlet and Neumann problems, Poisson's equation,
Legendre functions, spherical harmonics, Bessel and spherical Bessel functions, examples
from electrostatics.
Integral Equations. Type I and type II Fredholm and Volterra equations, solution via
Fourier and Laplace transforms, Abel's equation. Separable Kernels: compact and Hilbert-
Schmidt operators, Fredholm alternative again. Perturbation methods: Neumann and
Fredholm series.
Textbook:-
4. Kwong Tin Tang, Mathematical Methods for Engineers and Scientists 3: Fourier
analysis, Partial Differential Equations and Variational Methods, Springer; 2007
edition
5. Kwong Tin Tang, Mathematical Methods for Engineers and Scientists 2: Vector
Analysis, Ordinary Differential Equations and Laplace Transforms, Springer; 2007
edition
6. Kwong Tin Tang, Mathematical Methods for Engineers and Scientists 1: Complex
Analysis, Determinants and Matrices, Springer; 2007 edition
111
Introduction to Maxwell relations, Clausius-Clapeyron equation, volume expansivity and
isothermal compressibility, Mayer relation, Joule-Thomson coefficient.
Properties of Steam:
Dryness fraction, enthalpy, internal energy and entropy, steam table, polynomial form of
steam equations and Mollier chart, First law applied to steam processes.
Vapour Power Cycles:
Carnot vapour cycle, Rankine cycle, Ideal reheatRankine cycle, Introduction to cogeneration.
Gas Power Cycles:
Air standard assumptions, Otto cycle, Diesel cycle, dual cycle, Stirling cycle, Ericsson cycle,
Atkinson cycle, Brayton cycle.
Reactive Systems:
Combustion, theoretical and actual combustion processes, enthalpy of formation and enthalpy
of combustion, Adiabatic flame temperature, first law analysis of reactive system.
Textbook:-
Gordon Rogers, Yon Mayhew, Engineering Thermodynamics: Work and Heat Transfer,
Longman Scientific; 4th edition, 1992.
Reference Books:
1. Thermodynamics: An Engineering Approach by Yunus A. Cengel and Michael A
Boles,7e, TMH.
2. Engineering Thermodynamics- A Generalized Approach by P L Dhar, ELSEVIER
3. Thermodynamics by P K Nag, TMH, 5TH Edition
4. Modern Engineering Thermodynamics by Robert T Balmer, ELSEVIER
5. Basic Engineering Thermodynamics by Rayner Joel, Longman Publishers
6. 14. Fundamentals of Classical Thermodynamics by Van Wylen G.H. & Sonntag R.E.,
John Wiley & Sons.
7. 16. Holman, J.P. Thermodynamics. McGraw- Hill
112
conductors short pitch Double layer lap winding. Electrical Building Wiring: Prepare the
following drawings as per standard practiced in industries for a Housing complex
OR Commercial complex OR Hotel OR Hospital (Any ONE): i) LT Main Panel board
General Arrangement diagram. ii) Schematic SLD (single line diagram) of LT distribution.
iii) Schematic SLD and layouts for lighting, UPS and power loads. Preparing paper layout
and plotting the drawings.
Textbook:-
113
BJT: Regions of operation, normally ON and normally OFF state biasing, working of BJT
CE amplifier and BJT as a switch
Single phase transformer:
Construction, working principle, Emf equation, ideal and practical transformer, transformer
on no load and on load, phasor diagrams, equivalent circuit, O.C. and S.C test, Efficiency
DC Motors
Construction, principle of working, significance of commutator and brushes in DC machine,
classification EMF equation, Torque equation, characteristics of DC Motors
Starters for shunt and series motors
Speed Control: basic principle and working of different methods
Three Phase Induction Motor
Construction, working principle of squirrel cage induction motor
Equivalent circuit: Equivalent circuit development, torque speed characteristics, power
Speed control methods
Starting methods: Classification and working of different methods
Low Power Motors
Brushless DC Motors: Unipolar brushless DC motor, Bipolar brushless DC motor, speed
control, important features and applications
Stepper Motors: Constructional features, working principle and applications
Single phase Induction Motors: construction, working, starting methods, tor-speed
characteristics and applications
References:
6. M E Van Valkenburg, ―Network Analysis‖, Prentice-Hall of India Pvt Ltd, New Delhi
7. Donald A. Neamen, Electronic Circuit Analysis and Design, TATA McGraw Hill,
2nd Edition, New Delhi
8. Bimbhra P.S., Electric Machinery , Khanna Publisher, New Delhi
9. M. A. Mazadi and J. C. Mazadi, ―The 8051 Microcontroller and Embedded Systems‖,
Pearson Education, New Delhi
10. John Uffenbeck , ―8086/8088 family: Design Programming and Interfacing‖, Pearson
Education, New Delhi
114
Special Mechanisms: Straight line generating Mechanisms:
Exact Straight Line Generating Mechanisms – Peaucellier‘s and Hart‘s Approximate Straight
Line Generating Mechanisms – Watt‘s, Grasshopper and Tchebicheff‘s.
Offset slider crank mechanisms, Pantograph. Hook joint- single and double
Steering gear mechanisms – Ackerman, Davis
Velocity Analysis of mechanisms (mechanisms up to 6 links).
Velocity analysis by instantaneous center of rotation method (Graphical approach)
Velocity analysis by relative velocity method (Graphical approach). Analysis is extended to
find rubbing velocities at joints, mechanical advantage (Graphical approach).
Velocity analysis of low degree complexity mechanisms (Graphical approach). Auxiliary
point method
Velocity and Acceleration analysis of mechanism.
Velocity and Acceleration – analysis by relative method (mechanismsup to 6 link) including
pairs involving Coriolis acceleration (Graphical Approach).
Cam Mechanisms:
Cam and its Classifications.
Followers and its Classification.
Motion analysis and plotting of displacement-time, velocity-time, acceleration- time, jerk-
time graphs for uniform velocity. UARM, SHM and Cycloid motions (combined motions
during one stroke excluded).
Motion analysis of simple cams – R-R cam, D-R-R and D-R-D-R cam-operating radial
translating follower.
Pressure angle and method to control pressure angle
Layout of cam profiles.
Flexible Connectors:
Belt – Types of belts, velocity ratio, slip & creep, length of belt for open & cross system.
Law of belting, Dynamic analysis- driving tensions, centrifugal tension, initial tension,
condition of maximum power transmission.
Chains – types of chains, chordal action, variation in velocity ratio, Length of chain
Gears
Law of gearing, Involute and Cycloid gear tooth profile, Construction of Involute profile.
Path of contact, arc of contact, contact ratio for involutes and cycloidal tooth profile,
Interference in involutes gears. Critical Numbers of teeth for interference free
motion.Methods to control interference in involutes gears.
Static force analysis in gears- spur, helical, worm & worm wheel.
References:
1. Theory of Mechanisms and Machines by Amitabh Ghosh and A. Kumar Mallik.
2. Theory of Machines – P. L. Ballaney
3. Kinematics of Machines by R T Hinckle (Prentice Hall Inc.)
4. Kinematics By V.M. Fairs (McGraw Hill)
5. Mechanism Design: Analysis and Synthesis Vol. I by A. Erdman and G.N. Sander
(Prentice Hall)
6. Kinematics and Dynamics of Planer Mechanisms by Jeremy Hirsihham (McGraw
Hill).
115
2. To understand application of mass, momentum and energy equation in fluid flow.
3. To learn various flow measurement techniques.
Description:-
Fluid Definition and properties, Newton‘s law of viscosity concept of continuum,
Classification of fluids
Fluid Statics: Definition of body and surface forces, Pascal‘s law, Basic hydrostatic equation,
Forces on surfaces due to hydrostatic pressure, Buoyancy and Archimedes‘ principle
Fluid Kinematics:
Eulerian and Lagrangian approach to solutions; Velocity andacceleration in an Eulerian flow
field; Definition of streamlines, path lines and streak lines; Definition of steady/unsteady,
uniform/non-uniform, one-two and three dimensional flows; Definition of control volume
and control surface, Understanding of differential and integral methods of analysis
Definition and equations for stream function, velocity potential function in rectangular and
cylindrical co-ordinates, rotational and irrotational flows; Definition and equations for source,
sink, irrotational vortex, circulation
Fluid Dynamics:
Integral equations for the control volume: Reynold‘s Transport theorem( with proof),
equations for conservation of mass, energy and momentum, Bernoulli‘s equation and its
application in flow measurement, pitot tube, venture, orifice and nozzle meters.
Differential equations for the control volume: Mass conservation in 2 and 3 dimension in
rectangular and cylindrical co-ordinates, Euler‘s equations in 2,3 dimensions and subsequent
derivation of Bernoulli‘s equation; Navier-Stokes equations( without proof) in rectangular
cartesian co-ordinates; Exact solutions of Navier-Stokes Equations to viscous laminar flow
between two parallel planes ( Couette flow and plane Poiseuille flow)
Real fluid flows:
Definition of Reynold‘s number, Laminar flow through a pipe ( Hagen-Poiseuille flow),
velocity profile and head loss; Turbulent flows and theories of turbulence-Statistical theory,
Eddy viscosity theory and Prandtl mixing length theory; velocity profiles for turbulent flows-
universal velocity profile, (1/7)th power law; Velocity profiles for smooth and rough pipes 4.2
Darcy‘s equation for head loss in pipe( no derivation),Moody‘s diagram, pipes in series and
parallel, major and minor losses in pipes
Boundary Layer Flows:
Concept of boundary layer and definition of boundary layer thickness, displacement,
momentum and energy thickness; Growth of boundary layer, laminar and turbulent boundary
layers, laminar sub-layer; Von Karman Momentum Integral equation for boundary layers,
analysis of laminar and turbulent boundary layers, drag, boundary layer separation and
methods to control it, streamlined and bluff bodies
Aerofoil theory: Definition of aerofoil, lift and drag, stalling of aerofoils, induced drag
Compressible Fluid flow:
Propagation of sound waves through compressible fluids, Sonic velocity and Mach number;
Application of continuity , momentum and energy equations for steady state conditions;
steady flow through nozzle, isentropic flow through ducts of varying cross-sectional area,
Effect of varying back pressure on nozzle performance, Critical pressure ratio
Normal shocks, basic equations of normal shock, change of properties across normal shock
References:
1. Fluid Mechanics : Streeter and Wylie, McGraw Hill
2. Fluid Mechanics : F.M.White, McGraw Hill
3. Introduction to Fluid Mechanics: Fox and McDonald
4. Mechanics of Fluids: Irving Shames
5. 10. Advanced Fluid Dynamics: Muralidhar and Biswas
116
6. Fluid Mechanics and Hydraulics, S. K. Ukarande, Ane Books Pvt.Ltd.
117
1. Study and analysis of basic heat transfer concepts applicable for steady state and
transient conditions
2. Study mathematical modeling and designing concepts of heat exchangers
Description:-
Introduction
Typical heat transfer situations, Modes of heat transfer, heat transfer parameters, various
thermo physical properties
Conduction
Fourier‘s law of heat conduction, thermal conductivity, differential equation of heat
conduction with heat generation in unsteady state in the Cartesian coordinate system,
Boundary and initial conditions, Solution to three dimensional steady heat conduction
problems, Steady heat conduction in plane walls, composite walls, Concept of thermal
resistance and thermal resistance network, Heat conduction in cylinders and spheres,
Differential equation of heat conduction in cylindrical co-ordinates, Conduction through
Cylindrical and Spherical composite walls (Derivation NOT INCLUDED for Spherical
walls), Critical thickness/radius of insulation and its importance.
Extended Surfaces
Heat transfer from finned surfaces, Types of fins, Fin equation for rectangular fin and its
solution, Fin efficiency, Fin effectiveness
Transient Heat Conduction
Lumped system analysis, One dimensional transient problems analytical solutions, One
dimensional Heisler charts
Numerical Methods in Conduction
Importance of numerical methods, Finite difference formulation of one dimensional steady
heat conduction equations
Convection
Physical mechanism of convection, Natural and Forced convection, Velocity/hydrodynamic
and Thermal boundary layer, Velocity and temperature profile, Differential equation of heat
convection, Laminar flow heat transfer in circular pipe, constant heat flux and constant wall
temperature, thermal entrance region, Turbulent flow heat transfer in circular pipes, Pipes of
other cross sections, Heat transfer in laminar and turbulent flow over a flat plate, Heat pipe
introduction and applications, Principles of dimensional analysis and its application in
convective heat transfer, Empirical correlations for convection, Physical significance of
various dimensionless numbers useful in natural and forced convection
Radiation
Thermal radiation, Blackbody radiation, Radiation intensity, Radiative properties, Basic laws
of radiation (Plank‘s law, Kirchoff‘s law, Stefan-Boltzman law, Wien‘s displacement law,
Lambert‘s cosine law, Radiation exchange between black surfaces, Shape factor, Radiation
exchange between gray surfaces, Radiosity- Irradiation method, Radiation shield and the
radiation effect
Boiling and Condensation
Boiling heat transfer, Pool boiling, Flow boiling, Condensation heat transfer, Film
condensation, Drop wise condensation
Heat Exchangers
Types of heat exchangers, Overall heat transfer coefficient, Analysis of heat exchangers,
LMTD method, Effectiveness-NTU method, Correction factor and effectiveness of heat
exchangers
References
1. Introduction to Thermodynamics and Heat Transfer, 2nd ed., Yunus A Cengel,
McGraw Hill International.
118
2. Fundamentals of Heat and Mass Transfer, F. P. Incropera and D. P.DeWitt, Wiley
India
3. Heat and Mass Transfer, 2nd ed., R Rudramoorthy and L Mayilsamy, PEARSON
4. Fundamentals of Engineering Heat and Mass Transfer, 4th ed., R C Sachdeva, New
Age International
5. Heat Transfer, 9th ed., J P Holman, McGraw Hill
6. Heat and Mass Transfer, 2nd ed., P K Nag, Tata McGraw Hill
:هطلىثبد سبثمخ
أزمبي اٌؾواهح
.خ٠خ اٌؾواه١ِٕب٠ اٌل
:الهذف
.ُٞ ٔظُ إٌمً اٌؾواه١ّ رظٟخ ف١م١ؼبة اٌّوؽٍخ اٌزطج١ الٍزٟاٌَؼ
:هفرداد الومرر
خ٠ أِضٍخ اٌّجلالد اٌؾواهٚ ُ١ّ رظ
ف١ اٌزىضٚ اٌزجقوٚ ْب١ٍ اٌغ
كاهاد اٌجقبه
ل٠ كاهاد اٌزجو
و اٌّزفبػٍخ١عبد غٚ اٌّّي
.ِٞزوٚىو١ٌَ ا
:التجبرة الوعوليخ
. ٞ كاهح ِجبكي ؽواهٍٝ افزجبه ػ
.ل٠ كاهح رجوٍٝ افزجبه ػ
References:
1. Holman, J.P, Heat Transfer, McGraw-Hill
2. Trot & Welsh, Refrigeration & Air Conditioning, Butterworth-Heinmann.
119
Dynamometers - Absorption and transmission dynamometers, Study and analysis of
absorption type dynamometer - Proney brake, Rope brake, dynamometers, Study and analysis
of transmission type dynamometers - Belt transmission, epicyclical, torsion dynamometers,
Froude hydraulic dynamometer
Governors: Comparison between governors and flywheel, Types - centrifugal governors,
inertia governors,
Force analysis of gravity loaded governors - Watt, Porter, Proell, Force analysis of spring
loaded governors - Hartnell, hartung, Wilson Hartnell, Force analysis of spring and gravity
loaded governor, Performance characteristics of governors- stability, sensibility,
isochronisms, Hunting, governor effort and governor power, coefficient of insensitiveness.
Gyroscope: Introduction - Gyroscopic couple and its effect on spinning bodies, Gyroscopic
effect on naval ships during steering, pitching and rolling., Ship stabilization with gyroscopic
effect
Two wheeler and four wheeler on curved path - effect of gyroscopic and centrifugal
couples, maximum permissible speeds on curve paths, Gyroscopic effect due to lateral
misalignment of rigid disc mounted on shaft
Gear Trains: Kinematics and dynamic analysis of - simple gear trains, compound gear
trains, reverted gear trains, epi-cyclic gear trains with spur or bevel gear combination.
Transmissions: Necessity of gear box, Sliding mesh, Constant mesh, Synchromesh and
epicyclic gear box,
Static and Dynamic force analysis in slider crank mechanism (neglecting mass of
connecting rod and crank), Engine force analysis, Turning moment on crank shaft.
Dynamically equivalent systems to convert rigid body to two mass with and without
correction couple.
Flywheel and its applications, Fluctuation in energy, function of flywheel , estimating
inertia of flywheel for reciprocating prime movers and machines.
References
1. Theory of Machines - S. S. Ratan - Tata McGraw Hill
2. Dynamics of Machines – Norton, McGraw Hill Publication
3. Theory of Machines - W. G. Green – Bluckie & Sons Ltd.
4. Kinematics, Dynamics and Design of Machinery, 2nd ed., Kenneth Waldron, Gary
Kinzel, Wiley India Edition
5. Essential MATLAB for Engineers and Scientist - Brian D. Hanhn, Daniel Valentine,
120
Miscellaneous processes like thread rolling roll forging, production of seamless tube by
rolling, defects in rolled products. Forging (basic principles, machines, types etc), extrusion
and wire drawing
Welding and Joining Processes:Mechanical fastening (Riveting), adhesive bonding,
soldering and brazing. Welding Introduction, Fusion welding, gas and arc welding,
submerged arc welding, inert gas welding, Electric slag welding, Carbon-dioxideshielded
welding, thermit welding, Pressure welding, solid phase welding, resistance welding, and
friction welding. Welding Equipment, process capability of welding its and applications.
Weld joints- types, edge preparations. Weldability – designs, process and metallurgical
considerations – testing and improvement of weldability – microstructure of weld – welding
defects, advancements in welding.
Powder Metallurgy: like sintering and metal injection molding: Principle, process,
applications, advantages and disadvantages of powder metallurgy, Processes of powder
making and mechanisms of sintering.
Moulding with polymers: Basic concepts related to Injection Moulding, Compression
moulding, Transfer moulding, Blow Moulding, Rotational Moulding, Thermoforming and
Extrusion. Applications of plastics in Engineering field.
Moulding with ceramics: Blow moulding and extrusion of glass.
Non Destructive Techniques: Dye Penetrant, Magnetic, Electrical, Ultrasonic and
Radiographic non-destructive testing methods.
References:
1. Workshop Technology By W. A. J. Chapman part I, II & III
2. A Textbook of Foundry Technology by M. Lal
3. Production Technology by R. C. Patel and C. G. Gupta Vol I, II.
4. Manufacturing, Engineering and Technology SI by SeropeKalpakjian, Steven R.
Schmid, published by Prentice Hall
5. Introduction to manufacturing processes by John A. Schey, published by McGraw-
Hill
6. 14. Welding Technology by Little
121
Active Filters: First order filters, Second order active finite and infinite gain low pass, high
pass, band pass and band reject filters.
Sine Wave Oscillators: RC phase shift oscillator and Wien bridge oscillator
Non-Linear Applications of Operational Amplifier
Comparators: Inverting comparator, non-inverting comparator, zero crossing detector,
window detector and level detector.
Schmitt Triggers: Inverting and non-inverting Schmitt trigger
Waveform Generators: Square wave generator and triangular wave generator with duty
cycle modulation
Precision Rectifiers: Half wave and full wave precision rectifiers and their applications.
Peak Detectors, Sample & Hold Circuits, voltage to frequency converter, frequency to
voltage converter, logarithmic converters and antilog converters
Data Converters
Analog to Digital: Performance parameters of ADC, Single Ramp ADC, ADC using DAC,
Dual Slope ADC, Successive Approximation ADC, Flash ADC, ADC0808/0809 and its
interfacing
Digital to Analog: Performance parameters of DAC, Binary weighted register DAC, R/2R
ladder DAC, Inverted R/2R ladder DAC, DAC0808 and its interfacing
Special Purpose Integrated Circuits
Functional block diagram, working, design and applications of Timer 555.
Functional block diagram, working and applications of VCO 566, PLL 565, multiplier 534,
waveform generator XR 2206, power amplifier LM380.
Voltage Regulators
Functional block diagram, working and design of three terminal fixed (78XX, 79XX series)
and three terminal adjustable (LM 317, LM 337) voltage regulators.
Functional block diagram, working and design of general purpose 723 (LVLC, LVHC,
HVLC and HVHC) with current limit and current fold-back protection, Switching regulator
topologies, Functional block diagram and working of LT1070 monolithic switching regulator.
References:
11. Sergio Franco, ―Design with operational amplifiers and analog integrated circuits‖,
Tata McGraw Hill, 3rd Edition.
12. William D. Stanley, ―Operational Amplifiers with Linear Integrated Circuits ‖,
Pearson, 4th Edition
13. D. Roy Choudhury and S. B. Jain, ―Linear Integrated Circuits‖, New Age
International Publishers, 4th Edition.
14. Ramakant A. Gayakwad, ―Op-Amps and Linear Integrated Circuits‖, Pearson Prentice
Hall, 4th Edition.
15. R. P. Jain, ―Modern Digital Electronics,‖ Tata McGraw Hill, 3rd Edition.
16. R. F. Coughlin and F. F. Driscoll, ―Operation Amplifiers and Linear Integrated
Circuits‖, Prentice Hall, 6th Edition.
17. J. G. Graeme, G. E. Tobey and L. P. Huelsman, ―Operational Amplifiers- Design &
Applications‖, NewYork: McGraw-Hill, Burr-Brown Research Corporation.
122
4. To present the main building blocks of electronic measurement systems, including
amplifiers, filters, and transmission media.
Description:-
Principles and systems of measurements of current , voltage, power, resistance, capacitance,
inductance, energy, phase angle, frequency, and time at different frequencies ( direct current,
radio frequencies , microwave frequencies and optical frequencies). Measurements of field
strength, signal to noise and interference ratio, attenuation, and frequency response of
materials and systems at high frequencies.
Op Amp Circuits for Electronic Instrumentation. Signal Conditioning and Transmission.
Active Filter Design. Noise Reduction Techniques. Sensors. Digital & analogue techniques.
Instrumentation in industrial & harsh environments
Textbook:-
A.K. Sawhney, " A Course in Electrical and Electronic Measurements and Instrumentation",
DHANPAT RAI, Seventeenth Edition, 2004
References:-
7. Martin U, Reissland, Electrical Measurements: Fundamentals, Concepts, and
Applications, New Age International Publishers, New Delhi, 2003
8. Kalsi—Electronic Instrumentation , TMH
9. P.P.L. Regtien, Electronic instrumentation, Delft Academic Press, VSSD, Hill, 2005.
10. Analysis and Application of Analog Electronic Circuits to Biomedical
Instrumentation, Robert B. Northrop, CRC PRESS, 2004, ISBN: 0-8493-2143-3
11. Fundamentals of Instrumentation and Measurement, Ed. Dominique Placko, ISTE
Ltd, 2007.
12. Ramon Pallas-Areny, John G. Webster, Sensors and Signal Conditioning, Wiley-
Interscience; 2nd edition, 2000.
123
two means large samples, Sampling distribution of means and difference two means small
samples, t-distribution and its applications).
One- and two-sample estimation problems (Statistical Inference, Classical Methods of
estimation, Estimating mean for one sample, Standard error of a point estimate, Prediction
Interval, Estimating the difference between two means for two samples, Estimating a
Proportion for single proportion, determination of the sample size at a specified error,
Estimating a Proportion for two proportions).
One and Two-sample tests of hypotheses (Null and Alternative hypotheses, type I error,
type II error, One and two tailed tests, P-value, Tests concerning a single mean, Tests on two
means, Test on a single proportion).
Simple linear regression (Least squares and the fitted model, Properties of the least squares
estimators, Inferences concerning the regression coefficients, prediction).
Textbook:-
Walpole, Myers, Myers & Ye, Probability & Statistics for Engineers and Scientists; Pearson;
9th edition, 2011.
124
4. Machine Design - Pandya & Shah- Charotar PI/blishing.
5. Mechanical Engineering Design - J. E. Shigley - McGraw Hill
:الهذف
.ُٞ ٔظُ إٌمً اٌؾواه١ّ رظٟخ ِزملِخ ف١م١ؼبة ِوؽٍخ رطج١ الٍزٟاٌَؼ
:هطلىثبد سبثمخ
1 خ٠ٕ٘لٍخ ؽواه
:هفرداد الومرر
أٌٍ االؽزواق
ً اٌّواعٟ أزمبي اٌؾواهح فٚ االؽزواق
:التجبرة الوعوليخ
.كٛلٌٛ خ٠ّخ اٌؾواه١ل اٌم٠ ٌزؾلٞو١اٍزقلاَ اٌَّؼو اٌزفغ
:الكتبة الوٌهجي
ElMahalawi & Habik, Fundamentals & Technology of Combustion, Elsevier.
125
Machining (LBM),Electron Beam Machining (EBM), Arc cutting processes and Oxy fuel
cutting process.
Plastics Injection Mold Design: General arrangement of an injection mold, Basic systems of
the mold – Feeding system, cooling system and ejection systems, Concepts of three plate
molds and tooling for moulding articles with undercuts, Concepts of split molds, hot runner
systems – Their advantages and limitation over conventional systems. Basic concepts of mold
standardization and innovative mold components.
Agile Manufacturing Technologies: Introduction, Developing agile manufacturing,
Integration of Product/Process Development, Application of IT/IS concepts, Agile supply
chain management, Design of skill and knowledge and Computer control of Agile
manufacturing. Flexible manufacturing systems.
References
1. Mechanical Metallurgy, G E Dieter ,McGraw Hill.
2. Jigs and Fixtures, P H Joshi, Mc Graw Hill.
3. Production Technology, HMT, Tata Mc Graw Hill.
4. Introduction to Jigs and Tool design, HA Kempster, Butterworth Heinemann Ltd.
5. Fundamentals of modern Manufacturing, Fourth Edition, Mikell P Groover, John
Wiley & Sons.
6. Metals handbook ,Forming and Forging, Vol. 14, ASM.
:الهذف
.خ١ى١ٔىب١ٌِّبد اٛاء ٌٕمً اٌملهح كافً إٌّظٌٛٙ اٚ دٛ٠ٍبً الٍزقلاَ اٌي٤اػل اٛبْ اٌم١ث
:هطلىثبد سبثمخ
ائغٌّٛىب ا١ٔىب١ِ
.1 الد٢ىب ا١ٔىب١ِ
:هفرداد الومرر
ٍٟطً ٍبئِٛ لبػلح ٔمً اٌملهح ػجو
ٍٟ ػٕبطو إٌمً اٌَبئ
ٍِٟبد ٔمً ٍبئٛ ِٕظ
ٟائٛ٘ ًطِٛ لبػلح ٔمً اٌملهح ػجو
ٟائٌٛٙ ػٕبطو إٌمً ا
ٟائٛ٘ ًِبد ٔمٛ ِٕظ
:التجبرة الوعوليخ
.خ١ى١ٔىب١ٌّخ اٌفبئلح ا٠ك ٔظو١ ٌزؾمٍِٟخ ٔمً ٍبئٛاٍزقلاَ ِٕظ
:الكتبة الوٌهجي
Thomas E. Scot, Power Transmission, Prentice Hall.
:الهذف
.ٍٟٕلٌٙ اٌّغبي اٟائغ اٌَّزقلِخ فٌّٛالد ا٢ ٍّٟ ػٚ ُٞ ٔظوٙـ ف١ٍ روٚ ائغٌّٛخ ٌؼًّ آالد ا٠اٍزقالص اٌمبػلح إٌظو
126
:هطلىثبد سبثمخ
ائغٌّٛىب ا١ٔىب١ِ
.ًٞ اٌؼلك١ٍ اٌزؾ
:هفرداد الومرر
ائغٌّٛالد ا٢ ًٍب٤خ ا٠ إٌظو
ٕبد١هثٛ اٌزٚ ف اٌّؼقبد١ٕ رظ
ىاؽخ٦عجخ اِٛ اٌّؼقبد
خ١ٔهاٚ اٌّؼقبد اٌل
خ١ٕبد اٌّبئ١هثٛ اٌز
.اءٌٛٙاغؾ اٛ ػ
:التجبرة الوعوليخ
:الد٣ٌ ْب٠ اٌىفبءح ِغ ِؼلي اٌَوٚ ٌؼاللخ اٌؼغؾٍّٟ افزجبه ِؼ
اٌّؼقخ إٌبثنح .i
خ٠هٛاٌّؼقخ اٌّؾ .ii
خ٠اٌّؼقخ اٌزوكك .iii
ٌ١َٔٓ فوا١هثٛ ر.iv
ْٓ وبثال١هثٛ ر.v
.خ ٌٍّؼقخ إٌبثنح١فٙاٌقظبئض اٌزى .vi
:الكتبة الوٌهجي
Streeter & Wylie, Fluid Mechanics, McGraw-Hill.
Massey, Mechanics of Fluids, Van Rheinhold.
127
W Nel, Management for Engineers, Technologists and Scientists, John Wiley & Sons, 2007.
128
B. Ignition Systems : Spark Plug and its requirements, Battery, Magneto, Electronic ignition
systems
C. Combustion: Combustion phenomenon in SI Engines, Ignition delay, Flame propagation,
Pressure-Crank angle diagram, Abnormal combustion, Auto ignition, Detonation and
Knocking, Factors affecting combustion and detonation, Types of combustion chambers
Compression Ignition Engines
A. Fuel Injection Systems : Types i.e. Air injection systems, Airless/solid injection systems,
Common rail, individual pump, distributor and unit injector etc, Injection pumps, Fuel
injector, Types of nozzle, Electronically controlled unit fuel injection system, C I Engine
Governors: necessity and characteristics
B. Combustion : Combustion phenomenon in C I engines, Stages of combustion, Delay
period, Knocking, Pressure-Crank angle diagram, Factors affecting combustion and
knocking, Types of combustion chambers
Engine lubrication : Types of lubricants and their properties, SAE rating of lubricants,
Types of lubrication systems
Engine Cooling : Necessity of engine cooling, disadvantages of overcooling, Cooling
systems and their comparison: Air cooling, Liquid cooling
Supercharging/Turbo-charging : Objectives, Effects on power output and engine
efficiency, Methods, Types, Limits
Engine Testing and Performance: Measurement of Break Horse Power, Indicated Power,
Fuel Consumption, Air flow, BMEP, Performance characteristic of SI and CI Engines, Effect
of load and Speed on mechanical, indicated thermal, break thermal and volumetric
efficiencies, Heat balance sheet
Exhaust Emissions: Exhaust gas analysis and methods, necessity, constituents, Air pollution
due to engine exhaust, Pollution control devices and EURO, BHARAT standards
Fuels: SI and CI engine fuels, Rating of fuels, Non conventional fuels: CNG, LPG, Bio-fuels,
Hydrogen, Alcohol etc
Alternative Potential Engines: Stratified charge engine, Wankel engine, Free-piston engine,
Stirling engine, VCR engine, Dual fuel engines, Multi fuel engines
Modern Trends in I C Engines
References
1. Internal Combustion Engines, Willard W.Pulkrabek, Pearson Education.
2. Internal Combustion Engines, Shyam Agrawal, New Age International
3. Internal Combustion Engine, Mathur and Sharma
4. Internal Combustion Engines, Mohanty, Standard Book House
5. Internal Combustion Engine, Gills and Smith
129
hidden surface removal algorithm, light & shade ray tracing. The parametric representation of
geometry, Bezier curves, Cubic Spline curve, B-Spline curve, parametric representation of
line, circle, ellipse & parabola. Constructive solid geometry (CSG), Boundary Representation
(B-Rep), Wire Frame Modeling, Solid Modeling, Surface Modeling, Parametric Modeling,
feature based modeling, Feature recognition, Design by feature.
Transformation, Manipulation & Data Storage
2D & 3D Transformations (Translation, Rotation, & Scaling &
Magnification), Concatenations, Matrix representation, Problems & object oriented
programming on Transformations. Object transformation, mirror transformation, Artificial
Intelligence in Design & Manufacturing, Representation of Knowledge, and Knowledge base
Engineering.
NC & CNC Technology
Tape coding & format, Manual Part Programming, Computer Aided Part
Programming, CNC functions & advantages, DNC, adaptive Control, CNC programming
concepts, Trends & new developments in NC, Part programmers job, functions of a post
processor, NC part programming languages, Elements of a APT language, The Macro
Statement in APT, NC programming with interactive graphics. Constructional details of CNC
machines, Feedback devices- Velocity & displacement, Machining Centers and its types,
Automated Material Handling & storage Systems like Robots, AGVs and AS/RS etc.
Computer Aided Engineering (CAE)
Fundamentals of computer aided engineering,
CAE includes mass property calculations, kinematic analysis and animation (movement,
visualization, simulation and FEA). Case study based on modeling and analysis of structural,
thermal/fluid, and dynamic (vibration analysis) system. Parameter optimization.
References:
21. ―CAD/CAM Computer Aided and Manufacturing‖ by Mikell P. Groover and Emory
W. Zimmers, Jr., Eastern Economy Edition
22. ―CAD/ CAM , Theory & Practice‖ by Ibrahim Zeid, R. Sivasubramanian, Tata
McGraw Hill Publications
23. ―Computer Graphics‖ by Donald Hearn and M. Pauline Baker, Eastern Economy
Edition
24. ―CAD/CAM Principles, Practice and Manufacturing Management‖ by Chris
McMahon, Jimmie Browne, Pearson Education
25. ―CAD/CAM/CIM‖ by P. Radhakrishan, S. Subramanyan, V. Raju, New Age
International Publishers
130
Free Undamped Single Degree of Freedom Vibration System Longitudinal, transverse,
torsinal vibration system, Methods for formulation of differential equations by Newton,
Energy, Lagrangian and Rayleigh‘s Method,.
Free Damped Single Degree of Freedom Vibration System: Viscous damped system –
under damped, critically damped, over damped; Logarithmic decrement; Coulomb‘s
damping; Combined viscous and coulomb‘s damping.
Equivalent Single Degree of Freedom Vibration System: Conversion of multi-springs,
multi masses, multi – dampers into a single spring and damper with linear or rotational co-
ordinate system
Free Undamped Multi Degree of Freedom Vibration System: Eigen values and Eigen
vectors for linear system and torsional two degree of freedom; Holzer method for linear and
torsional unbranched system; Two rotors, Three rotors and geared system; Dunkerley‘s and
Rayleigh‘s method for transverse vibratory system
Forced Single Degree of Freedom Vibratory System: Analysis of linear and torsional
systems subjected to harmonic force excitation and harmonic motion excitation (excluding
elastic damper)
Vibration Isolation and Transmissibility: Force Transmissibility, Motion Transmissibility
Typical isolators& Mounts
Rotor Dynamics: Critical speed of single rotor, undamped and damped.
Vibration Measuring Instruments: Principle of seismic instruments, vibrometer,
accelerometer - undamped, damped. Introduction to Conditioning Monitoring and Fault
Diagnosis.: At least two case studies in detail based on Conditioning Monitoring and Fault
Diagnosis.
Balancing: Static and dynamic balancing of multi rotor system, Balancing of reciprocating
masses In - line engines, V - engines (excluding radial engines)
References
1. Mechanical Vibrations 4th ed- S. S. Rao - Pearson Education
2. Mechanical Vibrations - G. K. Grover
3. Fundamentals of Mechanical Vibration - S.Graham Kelly - Tata McGraw Hill 4.
4. Vibration Analysis - P. Srineevasan - Tata McGraw Hill
5. Mechanical Vibrations - Schaum's outline series - S.Graham Kelly- McGraw Hill
131
Relational Model and Algebra : Introduction , Mapping the ER and EER Model to the
Relational Model , Data Manipulation , Data Integrity ,Advantages of the Relational Model,
Relational Algebra , Relational Algebra Queries, Relational Calculus.
Structured Query Language (SQL) : Overview of SQL , Data Definition Commands,Set
operations , aggregate function , null values, Data Manipulation commands, Data Control
commands , Views-Using Virtual Tables in SQL, Nested and complex queries .
Introduction to Transactions Management and Concurrency: Transaction concept,
Transaction states, ACID properties, Implementation of atomicity and durability, Concurrent
Executions, Serializability, Recoverability, Concurrency Control: Lock-based , Timestamp-
based,
Validation-based protocols, Deadlock handling, Recovery System: Failure Classification,
Storage structure, Recovery & atomicity, Log based recovery, Shadow paging.
Graphical User Interface: Murphy ‘s Law of G U I Design, Features of G U I, Icons and
graphics, Identifying visual cues, clear communication, color selection, GUI standard,
planning GUI Design Work.
Visual programming:
Sharing Data and Code: Working with Projects, Introduction to Basic language, Using
inbuilt controls and ActiveX controls, creating and using classes, Introduction to Collections,
Using and creating ActiveX Components, dynamic data exchange, object linking and
embedding
Creating visual software entities: Working with text, graphics, working with files, file
management, serial communication, multimedia control interfaces.
References:
1. G. K. Gupta :‖Database Management Systems‖, McGraw – Hill.
2. Korth, Slberchatz,Sudarshan, :‖Database System Concepts‖, 6th Edition, McGraw – Hill
3. GUI Design for dummies,IDG books.
4. Visual Basic 2005, How to program (3RD Edition) Deitel&Deitel, Pearson Education.
5. Dr. P.S. Deshpande, SQL and PL/SQL for Oracle 10g,Black Book, Dreamtech Press
132
John V. Chelsom, Andrew C. Payne, Lawrence R. P. Reavill, Management for Engineers,
Scientists and Technologists, John Wiley & Sons; 2nd Edition, 2004.
References:-
W Nel, Management for Engineers, Technologists and Scientists, John Wiley & Sons, 2007.
133
Components of Pelton turbine, definition of design parameters like speed ratio, jet ratio, and
estimation of various parameters like head, discharge, and efficiency etc., determination of
number of buckets.
Reaction Turbines:
Types of reaction turbines - inward and outward flow, radial mixed and axial; elements of the
turbine, estimation of various parameters. Similarity relations in turbines, definition of unit
quantities and specific quantities, selection of turbines. Prediction of results of prototypes
from the model test. Cavitations in turbines - causes, effects and remedies, Thoma's
cavitations parameter G. Use of G v/s specific speed graphs. Determination of safe height of
installation for the turbine. Characteristics of turbines, governing of turbines.
Gas Turbines
Applications of gas turbine, Actual Brayton cycle, open and closed cycle gas turbine,
methods to improve efficiency and specific output, open cycle with intercooling, reheat, and
regeneration. Effect of operating variable on thermal efficiency and work ratio,
Jet Propulsion Engines
Classification of jet propulsion engines, Thrust, Thrust power, Propulsive efficiency and
thermal efficiency, Afterburner, Introduction to Turbojet, Turbofan, Ram jet, Turboprop and
Rocket engine
References
1. Practical Boiler Operation Engineering and Power Plant, A R Mallick, 3rd ed, PHI
Learning
2. Thermal Engineering, Ballaney, Khanna Publishers, Reprint 1994
3. Thermal Engineering, Kothandraman, Domkundwar, Khajuria, Arora, Dhanpatrai& Sons.
4. Turbines, Compressors & Fans, S M Yahya, TMH
5. Thermal Engineering, R K. Rajput, Laxmi Publication
134
automation. Programmable Logic Controller (PLC) in automation: Basic structure, I/O
processing. Ladder logic diagram, PLC for industrial process control, Selection of PLC.
System Interfacing and Data Acquisition: Data Acquisition systems (DAQs), data loggers,
supervisory control and data acquisition, interfacing requirements, buffers, handshaking,
polling and interrupt, digital communication, parallel communication, serial communication
interface, universal asynchronous receiver and transmitter (UART), peripheral interface
device (PIA), analog interfacing, Component interconnection and impedance matching,
interfacing sensors and motor drives with microcomputer system.
Mechatronics case studies: Autonomous Mobile Root, Wireless Surveillance Balloon, Fire
Fighting robots, Cantilever beam vibration control using piezo sensors and actuators, Car
engine management, pick and place robot, automatic camera, CNC machine
References
1. Mechatronics, Kenji Uchino and Jayne R. Giniewicz, publication: Marcel Dekker, Inc.
2. Applied Mechatronics- A. Smaili and F. Mrad, OXFORD university press.
3. Mechatronics System Design , Shetty and Kolk, Cengage Learning, India Edition
4. Introduction to Mechatronics and Measurement Systems, Alciatore and HistandTata
McGraw-Hill
5. Mechatronics,Necsulescu, Pearson education.
135
Online Monitoring
Condition Monitoring Techniques, Vibration Monitoring and Signature Analysis. Wear
Debris Monitoring, Maintenance Management Information System, Expert systems,
Corrosion Monitoring and Control.
References
1. Introduction to TPM , Seiichi Nakajima, Productivity Press, Chennai.
2. Maintenance and Spare Parts Management,Gopalakrishnan, P, Banerji, A.K., Prentice –
Hall of India Pvt. Ltd.
3. Equipment planning for TPM Maintenance Prevention Design, Goto F, Productivity Press.
4. Total Productive Maintenance for Workshop Leaders, Shirose K., Productivity Press.
5. TPM for Operators,Shirose, K., Productivity Press.
6. New Directions for TPM, Suzuki, T., Productivity Press.
7. Maintenance Planning and Control, Kelly, A, Butterworth, London.
136
Heat exchangers: Design of vessels, Design of Shell and Tube Heat Exchanger, Study and
design of various types of jackets like plain half coil, channel, limpet coil.
Agitator
Study of various types of agitators and their applications. Baffling, Power requirement of
agitation. General design of agitator including blades, shaft, blade assembly.
References
1. Dr. M.V. Joshi, ―Process Equipment Design‖, Mc-Millan
2. Browell and Young, ―Process Equipment Design:, John Wiley
3. B.C. Bhattacharya, ―Introduction to Chemical Equipment Design – Mechanical Aspects‖,
CBS Publications
4. Standard Codes such as: ASME SEC-VIII, Div I & II; ASTM; API; TEMA.
137
Centrifugal compressor: Velocity diagrams, work input, Efficiency, Effect of blade shape,
Slip factor, Types of casings, Impeller and diffuser system and design aspects
Axial flow compressors: Velocity triangles and calculation of work input and efficiency
Losses in Compressors: Choking, Surging and Stalling
Pumps
Classification of pumps - positive displacement and non - positive displacement.
Positive Displacement pumps: Types and applications, general features of rotary pumps like
gear pumps, vane pumps etc., general feature of reciprocating pumps, definition of head,
discharge, work done and efficiency, types of reciprocating pumps, indicator diagram, use of
air vessel.
Centrifugal Pumps
Types - radial flow, mixed flow and axial flow, Priming of pumps, components of the pump,
Euler's equation and velocity triangles, correction factors for the head, design constant e.g.,
head constant, flow constant etc.,
Types of blade profiles, aerofoil theory of axial flow pumps, Pressure recuperating devices,
Radial thrust and axial thrust and methods used to balance them.
Trouble shooting in centrifugal pumps, self priming pumps. Concept of system and system
characteristics, Series and parallel operation of pumps. System curve for branch network.
Determination of operating point.
Cavitation in pumps, Determination of available and required NPSH
Energy Conservation in Pumping System
Estimating operating parameters, Calculation of percentage loading, Part load efficiency and
methods of improving efficiency, Improving loading, Changing impeller, trimming impeller,
Variable speed drive, etc.
Energy Conservation in Compressed air system
Applications of compressed air in industry, Compressed air network, Leak detection in
compressed air network, Load unload test, pump-up test, Methods to improve performance
References
1. Thermal Engineering – R. K. Rajput
2. Steam and gas turbine – R. Yadav
3. Turbines, Compressors & Fans by S M Yahya, Tata Mc graw Hill
4. Hydraulic. Machinery - JagdishLal
5. Industrial Energy Management and Utilisation, L.C.Witte, P.S.Schmidt, D.R.Brown ,
Hemisphere Publ, Washington,1988.
6. Energy Management Handbook, W.C.Turner, Wiley, New York, 1982.
7. Technology Menu for Efficient energy use- Motor drive systems, Prepared by National
Productivity Council and Center for & Environmental Studies- Princeton Univ, 1993.
138
Concepts of PPC:
Manufacturing systems- components and types, need for PPC, functions of PPC, relationship
of PPC with other departments. Factors influencing PPC in the organization, manufacturing
methods- projects & jobbing products, batch, mass / flow production, continuous / process
production. Management policies- planning for meeting demands, work distribution,
centralization. Organization of PPC- status of PPC department, internal structure, degree of
centralization, PPC as an integrated approach.
Activities of PPC:
Prerequisites of PPC- data pertaining to design, equipment, raw materials, tooling,
performance standards, labour& operating systems. Order preparation- works order
preparation for various manufacturing methods, subsidiary orders, shop or production orders,
inspection orders and stores issue orders.
Inventory Control:
Basic concepts of inventory, purpose of holding stock and influence of demand on inventory.
Ordering procedures, Two Bin system, ordering cycle, economical order quantity and
economical lot size, ABC analysis and reorder procedures. Recent trends- computer
integrated PP systems, JIT system and MRP-I, MRP-II and ERP (only theory).
Product Planning and Process Planning
Product planning: product information and its relevance. Problems in lack of product
planning. Process planning: Prerequisite information requirement, steps in process planning,
process planning in different situations, documents in process planning, machine / process
selection & Computer Aided Process Planning. Forecasting: Various Qualitative and
Quantitative models, their advantages and disadvantages.
Linear Programming Concepts
Introduction to Linear Programming, Problem Formulation, Simplex method. Assignment,
Transportation and Transshipment Models.
Production Scheduling and Sequencing
Inputs for scheduling, loading and scheduling devices, factors influencing scheduling,
scheduling techniques, use of Gantt Charts and basic scheduling problems. Product
sequencing, dispatching: progress report & expectation of manufacturing lead time technique
for aligning completion time &due dates. Project management: concepts of project planning,
monitoring and control, elements of network analysis –PERT & CPM, cost analysis &
crashing.
References
1. Production Planning and Control, L. C. Jhamb –Everest Publishing House.
2. Production Planning and Control, W. Boltan-Longman Scientific & Technical.
3. Production Systems- Planning, Analysis& Control, James. L. Riggs-John Wiley & Sons.
4. Manufacturing Planning and Control Systems, Thomas E. Vollman, Willam L. Berry&
Others-Galgotia Publishers.
5. Manufacturing Process Planning and Systems Engineering, Anand Bewoor-Dreamtech
Press.
6. Production and Operations Management, S.N.Chary- TMH publishing company.
7. Modernization & Manufacturing Management, L.C. Jhamb - Everest Publishing House.
139
2. To familiarize the students with various tools of optimization, probability, statistics and
simulation, as applicable in particular scenarios in industry for better management of various
resources.
Description:-
Linear Programming: Linear Programming Problem Formulation, Graphical solution,
Simplex method, Twophase method, Big-M method, Principle of Duality, Dual Simplex,
Sensitivity Analysis.
Transportation problem: Formulation - Optimal solution, Degeneracy. Assignment
problem: Formulation - Optimal solution, Traveling Salesman problem.
Sequencing: Introduction - Flow Shop sequencing - n jobs through two machines - n jobs
through three machines - Job shop sequencing - two jobs through ‗m‘ machines.
Replacement: Introduction - Replacement of items that deteriorate with time - when money
value is not counted and counted - Replacement of items that fail completely, group
replacement.
Queuing Models: Introduction -Single Channel - Poisson arrivals - Exponential service times
- with infinite population and finite population models, Multichannel - Poisson arrivals -
Exponential service times with infinite population single channel Poisson arrivals.
Game Theory: Introduction - Minimax (Maximin) -Criterion and optimal strategy - Solution
of games with saddle points – Rectangular games without saddle points - 2 X 2 games -
dominance principle - m X2 & 2 X n games, graphical method.
Inventory Models: Introduction - Single item - Deterministic models - Purchase inventory
models with one price break and multiple price breaks - shortages are not allowed -
Stochastic models - demand may be discrete variable or continuous variable -Instantaneous
production - Instantaneous demand and continuous demand and no set up cost.
Dynamic programming: Introduction - Bellman‘s Principle of optimality - Applications of
dynamic programming- capital budgeting problem - shortest path problem – Minimum
Spanning Tree.
Simulation: Definition - Types of simulation models - phases of simulation - applications of
simulation - Inventory and Queuing problems - Advantages and Disadvantages - Simulation
Languages.
References
1. Operations Research: Principle and Practices, A. Ravindran, D. Phillips, Wiley India.
2. Operations Research, S. D. Sharma, KedarNath Ram Nath-Meerut.
3. Operations Research, R. Panneerselvam, PHI Publications.
4. Operations Research, A. M. Natarajan, P. Balasubramani, A. Tamilarasi, Pearson
Education
5. Operations Research - An introduction, Hamdy A Taha, Pearson Education.
6. Operations Research, KantiSwarup, P. K. Gupta and Man Mohan, Sultan Chand & Sons.
7. Operations Research: Methods and Problems, Maurice Saseini, ArhurYaspan and
Lawrence Friedman.
8. Introduction to O.R, Hiller & Libermann (TMH)
140
PRJ5101 Project I: 3(0, 0, 6)
141
film air flow sensors, vortex flow/turbine fluid sensors, Optical sensor, Oxygen sensors, Light
sensors, methanol sensors. Rain sensor. New developments in the sensor technology
List of Exercises
1. Dismantling and assembly of gear boxes.
2. Dismantling and assembly of brakes.
3. Dismantling and assembly of steering mechanisms.
4. Dismantling and assembly of rear axle and differential.
5. Dismantling and assembly of suspension systems
6. Demonstration of battery charging and starting systems.
References
1. Automotive Mechanics, William Cruose& Donald L. Anglin, Tata Mcgraw Hill
2. Automotive Mechanics , Joseph Heitner, East-West press pvt .Ltd
3. The Automobile Engineering, T. R. Banga&Nathu Singh, Khanna Publishers
4. The Automobile, Harbans Singh Reyat, S. Chand & Co.
5. Automobile Engineering, R. K. Rajput, Laxmi Publication
142
1. ―CAD/ CAM , Theory & Practice‖ by Ibrahim Zeid, R. Sivasubramanian, Tata
McGraw Hill Publications
2. ―CAD/CAM Principles, Practice and Manufacturing Management‖ by Chris
McMahon, Jimmie Browne, Pearson Education
3. ―CAD/CAM Principles and Applications‖ by P.N. Rao, Tata McGraw Hill
Publications
4. ―Principle of Computer Graphics‖ by William .M. Neumann and Robert .F. Sproul,
McGraw Hill Book Co. Singapore.
5. David Bedworth, Computer Integrated Design and Manufacturing, McGraw Hill.
6. ―Computer Integrated Manufacturing- An Introduction with Case Studies‖ by Paul G.
Ranky, Prentice Hall International
7. ―Flexible Manufacturing Systems‖ by H.K. Shivanand, M.M. Benal, V.Koti, New
Age International Publishers
8. ―Computer Integrated Manufacturing Hand Book‖ by Eric Teicholz, Joel N. Orr,
McGraw Hill International Editions
9. ―Rapid Prototyping: Principles and Applications‖ Rafiq Noorani, Wiley
143
Textbook:-
1. Introduction to Statistical Quality Control: Douglas C. Montgomery, Wiley.
References:
1. Quality Control and Industrial Statistics Duncan. 2. Fundamental of Statistics and Quality
Control: Jerome D. Braveman
2. Manufacturing Engineering and Technology: Kalpakjian, Addison Wiley.
3. Fundamentals of Modern Manufacturing Mikell P. Groover, Prentice Hall.
144
1. Supply Chain Management Strategy, Planning, and operations, Sunil Chopra and Peter
Meindl
2. Materials Management & Purchasing, Ammer D.S. Taraporawala
3. Designing & Managing Supply chain, David Simchi Levi, Philip Kaminsky& Edith Smichi
Levi
4. Supply Chain Redesign: Transforming Supply Chains into Integrated Value Systems,
Robert B Handfield, Ernest L Nicholas
5. The Management of Business Logistics: A Supply Chain Perspective, Coyle, Bardi,
Langley
Project Management
Pre-requisites:
Objectives:
1. To familiarize the students with the use of a structured methodology/approach for each and
every unique project undertaken, including utilizing project management concepts, tools and
techniques.
2. To apprise the students with the project management lifecycle and make them
knowledgeable about the various phases from project initiation through closure. Course
Description:
Project Management Foundations
Definition of project management, project manager and project. Project types, project phases
and knowledge areas.
Initiating Projects
How to get a project started; Your project sponsor and creating charter; The project team and
team dynamics; running meetings
Planning Projects
Project estimating and scheduling techniques. PERT, CPM, GANTT chart. Introduction to
any one project scheduling software.
Planning Projects
Risk planning methods; Cost planning; Communication plan and Final project plan.
Executing Projects
145
Team management; communicating and engaging with all stakeholders of the projects.
Controlling Projects
Earned Value Management techniques for measuring your work completed; Using milestones
for measurement; change requests and scope creep. Keeping up with the project, Updating
the project, Project Issues management and Dealing with troubled projects.
Closing the Project
Customer acceptance; completing a final report; doing a lessons learned analysis;
acknowledging successes and failures; Project management templates and other resources;
Managing without authority; Areas of further study.References
1. Project Management and Control,Narendra Singh; Himalaya Publishing House
2. Preparation, Appraisal, Budgeting, Implementing and Review, Prasanna Chandra TMGH
3. Project Management: A managerial approach, Jack Meredith & Samuel Mantel, Wiley
India, 7th Ed.
4. Project Management, Dennis Lock, Gower Publishing England, 9th Ed.
5. Project Management, Gido Clements & Cengage Learning.
Robotics
Pre-requisites:
Objectives:
1. To familiarize the students with the significance of robotic system in agile and automated
manufacturing processes.
2. To prepare the students to be conversant with robotic elements/ peripherals, their selection
and interface with manufacturing equipments.
3. To familiarize the students with the basics of robot kinematics.
Course Description:
Introduction
Automation, robotics, Robotic system & Anatomy, Classification, Future Prospects.
Drives
Control Loops, Basic Control System Concepts & Models, Control System Analysis, Robot
Activation & Feedback Components, Position & Velocity Sensors, Actuators, Power
Transmission system.
Robot & its Peripherals
End Effecters: Type mechanical and other grippers, Tool as end effecter.
Sensors: Sensors in Robotics, Tactile Sensors, Proximity & Range Sensors, Sensor Based
Systems, Vision systems Equipment.
Machine vision
Introduction, Low level & High level Vision, Sensing & Digitizing, Image Processing &
analysis, Segmentation , Edge detection, Object Description & recognition, interpretation,
Applications.
Programming for Robots
Method, Robot Programme as a path in space, Motion interpolation, motion & task level
Languages, Robot languages, Programming in suitable languages, characteristics of robot.
Robot Kinematics
Forward, reverse & Homogeneous Transformations, Manipulator Path control, Robot
Dynamics.
Root Intelligence & Task Planning
Introduction, State space search, Problem reduction, use of predictive logic Means. Ends
Analysis, Problem solving, Robot learning, Robot task planning.
Robot application in manufacturing
146
Material transfer, machine loading & un loading, processing operation, Assembly &
inspectors, robotic Cell design & control, Social issues & Economics of Robotics.
References
1. Industrial Robotics : Technology, Programming & Applications : Grover, Weiss, Nagel,
Ordey, Mc Graw Hill.
2. Robotics: Control, Sensing, Vision & Intelligence: Fu, Gonzalex, Lee,McGraw Hill.
3. Robotic technology & Flexible Automation: S R Deb, TMH.
4. Robotics for Engineers: YoramKoren, Mc GrawHill .
5. Fundamentals of Robotics : Larry Health
Materials Selection
Pre-requisites: Materials science - Manufacturing processess II.
Objectives:
Objective:- At the end of the semester a successful student should be able to:
1. Understand clearly the different material properties useful for design, and have a thorough
knowledge of the properties of the different classes of materials.
2. Use standard reference sources and literature search to compare materials.
3. Understand the relation between design, materials, and processing.
4. Develop formal selection strategies using property limits and materials indices.
5. Develop formal selection strategies for process selection for a given application.
6. Solve selected case studies using combination of formal selection procedures.
7. Recognize the reason for the use of different materials in important engineering
applications, such as automobiles, aerospace, ship structures and power generation.
Course Description:
Material and their manipulation exert a profound influence on all stages of the engineering
process from design to manufacturing. With intensified international competition in every
field emphasis on materials and process selection, as a part of design process continues to
grow. The need for clear recognition of the service requirements of a component or structure
in order to provide the most technically advanced and economic means of achieving these
requirements points towards the importance of materials and process selection in engineering
design.
Textbook:
1. Materials Selection in Mechanical Design, Michael F. Ashby, 3rd Edition, 2005,
Butterworth and Heinemann. Oxford
2. Selection and Use of Engineering Materials, J A Charles, F. A. A. Crane and J. A. G.
Furness, 3rd Edition, 1997, Butterworth and Heinemann, Oxford.
147
Machine Tool Design, N. Acherkan.
References:-
Machine Tool Design, S. Tobias
148
• Positive and Negative Photoresists,
• Bulk Micromachining,
• Surface Micromachining,
• Etching (Isotropic and Anisotropic),
• Deposition techniques such as CVD (Chemical Vapor Deposition),
Metallization Techniques.
3D High Aspect Ratio Techniques
• LIGA,
• Microstereolithography,
• IH-Process,
• Ion-beam Lithography
Bulk Lithography (layer-less 3D microfabrication)
Modelling and Simulation Techniques
• Scaling Laws, Governing Equations
• Modelling of Mechanical Structures via classical methods, Newtons Laws, Thermal Laws,
Fluid Flow Analysis
• Micro-mechanism modelling and analysis techniques : Lumped Parameter Modelling and
Distributed Parameter Modeling
• Modelling of Micro-channel as heat exchanger, accelerometers
• Numerical Methods used for analysis of MEMS.
Characterization Techniques
Topography Methods (Optical, Electrical and Mechanical Methods)
• Microscopy, STM (Scanning Tunneling Microscopes),
• SEM (Scanning Electron Microscopes), AFM (Atomic Force Microscopes)
Mechanical Structure Analysis
• Deformation & Vibration Measurement Techniques (Piezo resistive and piezo electric)
Interferometry Techniques,
• ESPI (Electronic Speckle Pattern Interferometry),
• Laser Techniques, Laser Doppler Vibro-meters,
Fluid, Thermal and Chemical Techniques
• Fluid Flow Pattern Analysis, Electro-chemical Analysis,
• PIV Techniques
• Spectroscopy
Introduction to Nanotechnology
• CNT (Carbon Nano Tubes) Applications, its properties, and Fabrication Method,
• Nano-mechanical Systems (NEMS),
• Nano-tribology, & nano-indentation techniques,
• Domestic and Industrial Applications of nanotechnology.
References:
7. Julian W. Garden, Vijay K. Varadan and Osama O. Awadelkarim ―Microsensors
MEMS and Smart devices‖, John Wiley and sons, Ltd.
8. Nadim Mulaf and Kirt Williams, ―An Introduction to Microelectromechanical
systems Engineering‖, Artech House.
9. Nicolae Lobontiu and Ephrahim Garcia, ―Mechanics of Microelectromechanical
systems‖, Kluwer Academic Publication.
10. Stanley Wolf and Richard Tauber, ―Silicon Processing for the VLSI era Volume -1
Technology‖, Lattice press.
149
ميحرلا نمحرلا هللا بسم
April 2016
150
Table of contents
Page
SN Item
No.
1 Introduction 3
2 Program objectives 3
3 Duration & Pattern of Course 3
4 Degree Awarded 3
5 Program Outcomes 4
6 Degree Requirements 4
7 Subjects Codes 5
8 Coding Scheme 5
9 Statistical information 6
10 General analysis for the program hours 6
11 Distribution of the program hours 6
12 Time frame for the different subject areas 6
13 Humanities and Social Sciences 7
14 Basic Sciences and Mathematics 7
15 Basic Engineering Sciences 8
16 Applied Engineering Sciences and Design 9
151
Introduction
This program seeks to provide students with a broad education emphasizing an excellent
foundation in scientific and engineering fundamentals. Graduates of the B.Sc. degree
program offered by the Mechanical Engineering Department (Power) acquire excellent
background in basic sciences, mathematics, basic engineering sciences and applied
engineering in the mechanical power specialization. The program prepares undergraduate
students for employment or advanced postgraduate studies.
Degree Awarded
B.Sc (Honors) in Mechanical Engineering (Power)
152
Program Outcomes
The Mechanical Engineering (Power) Undergraduate Program is designed to provide students
with the following skills:
1. An ability to apply knowledge of mathematics, science, and engineering.
2. An ability to design and conduct experiments, as well as to analyze and interpret data.
3. An ability to design a system, component, or process to meet desired needs within
realistic constraints such as economic, environmental, social, political, ethical, health
and safety, manufacturability, and sustainability.
4. An ability to function on multi-disciplinary teams.
5. An ability to identify, formulate, and solve engineering problems.
6. An understanding of professional and ethical responsibility.
7. An ability to communicate effectively.
8. The broad education necessary to understand the impact of engineering solutions in a
global, economic, environmental, and societal context.
9. A recognition of the need for, and an ability to engage in life-long learning.
10. A knowledge of contemporary issues.
11. An ability to use the techniques, skills, and modern engineering tools necessary for
engineering practice.
Degree Requirements
To obtain the B.Sc. degree in Electrical Power Engineering, the student must successfully
complete 190 credit hours, out of which 20 credit hours represent the University requirement
(humanities and social sciences), 51 credit hours represent the College requirements and 119
credit hours represent the Department requirements. The Departmental requirements are split
into 61 credit hours of compulsory core courses in basic engineering sciences, 52 credit hours
in control systems engineering and 6 credit hour final year project.
153
Subjects Codes
Subject Code
Physics PHY
Chemistry CHM
Mathematics MTH
Training TRN
Coding Scheme
A 3 letter 3 digit (XXX999) coding is adopted:
3 Letters Subject Code
1 Digit Year or Level (1 for 1st Year, 2 for 2nd Year etc…)
1 Digit Semester within the year (1 for 1st Semester, 2 for 2nd Semester)
2 Digits Subject Serial Number
e.g.
MTH3107: Mathematics, 3rd Year, 1st Semester in 3rd Year, 7th Mathematics course
154
Statistical information
General analysis for the program hours
Semester One 18 6 9 33 23
Semester Two 17 8 12 37 23
Semester Three 18 6 9 33 22
Semester Four 16 8 10 34 20
Semester Five 14 8 12 34 20
Semester Six 12 7 8 27 17
Semester Seven 12 5 10 27 17
Semester Eight 12 5 8 25 16
Semester Nine 9 5 15 29 16
Semester Ten 12 6 11 29 16
Total 140 64 104 308 190
155
Humanities and Social Sciences courses
Contact
hours
Credit
Code Course Title Theo. Tut. Prac. hours
MTH1101 Algebra & Geometry 2 2 0 3
MTH1102 Calculus I 2 2 0 3
PHY1101 Physics I 2 1 3 3
CHM1101 Chemistry I 2 1 3 3
CMP1101 Introduction to Computing 2 0 3 3
MTH1203 Calculus II 2 2 0 3
MTH1204 Complex Variables 2 2 0 3
PHY1202 Physics II 2 1 3 3
CHM1202 Chemistry II 2 1 3 3
MEC1201 Engineering Mechanics 2 2 0 3
CMP1202 Computer Programming 2 0 3 3
MTH2105 Differential Equations 2 2 0 3
MEC2104 Material Science 2 1 1 2
MTH2206 Mathematical Methods 2 2 0 3
MTH3107 Numerical Methods 2 2 0 3
MTH3208 Probability & Statistics 2 2 0 3
GEN4103 Engineering Economics 2 0 0 2
GEN4204 Engineering Management 2 0 0 2
Total 36 23 19 10
156
Basic Engineering Sciences courses
157
Applied Engineering Sciences & Design courses
Contact
hours
Credit
Code Course Title Theo. Tut. Prac.
hours
MEC3116 Mechanical Engineering Lab. 1 0 0 8 4
MEC3222 Mechanical Engineering Lab. 2 0 0 8 4
MEC4127 Mechanical Engineering Lab.3 0 0 8 4
ELE4205 Automatic Control 2 1 0 2
Thermal and Fluid Power
MEP4202 2 1 0 2
Engineering
MEP4203 Mechatronics 2 1 0 2
MEP4204 Maintenance Systems 2 1 0 2
MEP4205 Lubrication 2 1 0 2
MEP4206 Mechanical Engineering Lab.4 0 0 8 4
MEP5107 Fluid Machines Systems 2 1 0 2
MEP5108 Mechanical Utility Systems 2 1 0 2
MEP5109 Refrigeration 2 1 0 2
MEP5110 Computational Fluid Dynamics 1 1 1 1
MEP5111 Elective Course I 2 1 2 3
MEP5112 Mechanical Engineering Lab.5 0 0 6 3
PRJ5101 Project I 0 0 6 3
MEP5213 Combustion Engines Systems 2 1 1 2
MEP5214 Power Plant Engineering 2 1 1 2
MEP5215 Air Conditioning 2 1 1 2
MEP5216 Renewable Energy 2 1 0 2
Environmental Protection &
MEP5217 2 1 0 2
Safety
MEP5218 Elective Course II 2 1 2 3
PRJ5202 Project II 0 0 6 3
Total 31 16 58 58
158
Evaluation of the program contents according to the requirements of Sudan
Engineering Council
Total
Number
Contact of Credit
Courses Classifications
hours contact hours
hours
Theo. Tut. Prac. number %
Applied engineering
31 16 58 105 58 30.53
sciences and Design
Humanities and social
20 0 0 20 20 10.52
sciences
159
Course Plan
Semester 1
Lecture Tutorial Practical Credit
Code Title
Hrs/week Hrs/week Hrs/week Hours
1 خ١ٍِال٦اٌلهاٍبد ا
ISL1101 3 1 1 3
Islamic Studies I
1 خ١اٌٍغخ اٌؼوث
ARB1101 3 1 1 3
Arabic Language I
1 خ٠ي١ٍٔغ٦اٌٍغخ ا
ENG1101 2 1 1 2
English Language I
ٕلٍخٌٙ اٚ اٌغجو
MTH1101 2 2 1 3
Algebra & Geometry
1 ْاٌؾَجب
MTH1102 2 2 1 3
Calculus I
1 بء٠ي١اٌف
PHY1101 2 1 3 3
Physics I
1 بء١ّ١اٌى
CHM1101 2 1 3 3
Chemistry I
ةٍِٛملِخ ؽب
CMP1101 2 1 3 3
Introduction to Computing
Total 01 6 9 32
Semester 2
Lecture Tutorial Practical Credit
Code Title
Hrs/week Hrs/week Hrs/week Hours
2 خ١اٌٍغخ اٌؼوث
ARB1202 3 1 1 3
Arabic Language II
2 خ٠ي١ٍٔغ٦اٌٍغخ ا
ENG1202 2 1 1 2
English Language II
2 ْاٌؾَجب
MTH1203 2 2 1 3
Calculus II
واد اٌّووجخ١اٌّزغ
MTH1204 2 2 1 3
Complex Variables
2 بء٠ي١اٌف
PHY1202 2 1 3 3
Physics II
2 بء١ّ١اٌى
CHM1102 2 1 3 3
Chemistry II
ٕلٍخٌٙىب ا١ٔىب١ِ
MEC1201 2 2 1 3
Engineering Mechanics
ةٍٛثوِغخ ؽب
CMP1202 2 1 3 3
Computer Programming
ُهٚ أػّبي
WST1201 1 1 3 1
Workshop Training
Total 17 8 12 32
160
Semester 3
Total 18 6 9 22
Semester 4
161
Semester 5
Semester 6
162
Semester 7 (Power)
Semester 8 (Power)
163
Semester 9 (Power)
Semester 10 (Power)
164
SN Elective Courses (Power)
1 Project Management
2 Emission and Pollution Control
3 Piping Engineering
4 Aerodynamics
5 Energy management
6 Fluids Engineering
165
Course Descriptions
)1 ، 1 ، 2(2 : 0 دراسبد إسالهيخISL1101
أهشلدٚ فخ٠خ اٌشو٠ٛ إٌَخ إٌجٚ ُ٠ب اٌموآْ اٌىوٙ١ٌ إٜ ٘لٟخ اٌز١ٌٍٍّ اٌؼ٤فك اٚ ؾخ١خ اٌظؾ١ٍِال٦لح ا١ـ اٌؼم١ٍرو
ٍٝ االؽالع ػ. ) إٌَخٚ ْخ (اٌموا١ٍٍب٤ؼخ ا٠بي اٌّضمفخ ثّظبكه اٌشو١ع٤ هثؾ اٚ ، َ اٌّقزٍفخٍٛ اٌؼٚ ب اٌّؼبهفٙ١ٌإ
. خ١ٍّس اٌؼٛ اٌجؾٚ خ١ٍِال٦ اٌلهاٍبد اٟب فٙ االٍزؼبٔخ ثٚ ف٠ش اٌشو٠ اٌؾلٚ ُ٠خ ٌٍموآْ اٌىو١ثؼغ اٌؾيَ اٌجوِغ
166
Functions of one variable. Concept of limits. Definitions and Techniques of Differentiation.
Derivatives of Trigonometric, Exponential, and Logarithmic Functions. Chain Rule. Implicit
Differentiation. Maximum and Minimum Values. Increasing, Decreasing and Concave
Functions.
Inverse Trigonometric Functions. Hyperbolic Functions. Some Engineering Applications.
II. Integral Calculus of functions of one variable
Definite and Indefinite Integrals. Techniques of Integration: Integration by Substitution,
Integration by Trigonometric Substitutions, Integration by Parts, and Integration by Partial
Fractions. Applications of Definite Integrals in Geometry. Some Engineering Applications.
Textbook:-
James Stewart, Essential Calculus, Early Transcendentals, Cengage Learning; 2nd Edition,
2012.
References:-
9. Robert T. Smith & Roland B. Minton "Calculus", McGraw-Hill, 3rd Edition, 2007.
10. Thomas, ―Calculus‖, Pearson Education, 12th Edition, 2010.
11. Stewart, ―Calculus‖, Thomson, 5th Edition, 2003.
12. Anton- Bivens- Davis, ―Calculus‖, John Wiley, 7th Edition, 2002.
167
13. To acquaint the student with concepts of important photophysical and photochemical
processes and spectroscopy.
14. To develop an understanding of the basic concepts of phase rule and its applications
to single and two component systems and appreciate the purpose and significance of
alloys.
15. To acquaint the students with the basics of nano materials, their properties and
applications.
Polymer Chemistry
Introduction: Classification of polymers – Natural and synthetic; Thermoplastic and
Thermosetting.
Functionality – Degree of polymerization. Types and mechanism of polymerization: Addition
(Free Radical, cationic and anionic); condensation and copolymerization. Properties of
polymers: Tg, Tacticity, Molecular weight – weight average, number average and
polydispersity index. Techniques of polymerization: Bulk, emulsion, solution and suspension.
Preparation, properties and uses of Nylon 6,6, and Epoxy resin.
Chemical Thermodynamics
Terminology of thermodynamics - Second law: Entropy - entropy change for an ideal gas,
reversible and irreversible processes; entropy of phase transitions; Clausius inequality. Free
energy and work function: Helmholtz and Gibbs free energy functions (problems); Criteria of
spontaneity; Gibbs-Helmholtz equation (problems); Clausius-Clapeyron equation; Maxwell
relations – Van‘t Hoff isotherm and isochore(problems).
Photochemistry and Spectroscopy
Photochemistry: Laws of photochemistry - Grotthuss–Draper law, Stark–Einstein law and
Lambert- Beer Law. Quantum efficiency – determination- Photo processes - Internal
Conversion, Intersystem crossing, Fluorescence, Phosphorescence, Chemiluminescence and
Photo-sensitization. Spectroscopy: Electromagnetic spectrum - Absorption of radiation –
Electronic, Vibrational and rotational transitions. UV-visible and IR spectroscopy –
principles, instrumentation (Block diagram only).
Phase Rule and Alloys
Phase rule: Introduction, definition of terms with examples, One Component System- water
system - Reduced phase rule - Two Component Systems- classification – lead-silver system,
zincmagnesium system. Alloys: Introduction- Definition- Properties of alloys- Significance
of alloying, Functions and effect of alloying elements- Ferrous alloys- Nichrome and
Stainless steel – heat treatment of steel; Non-ferrous alloys – brass and bronze.
Nanochemistry
Basics - distinction between molecules, nanoparticles and bulk materials; size-dependent
properties. Nanoparticles: nano cluster, nano rod, nanotube(CNT) and nanowire. Synthesis:
precipitation, thermolysis, hydrothermal, solvothermal, electrode position, chemical vapour
deposition, laser ablation; Properties and applications
Textbooks:
5. Jain P.C. and Monica Jain, ―Engineering Chemistry‖, Dhanpat Rai Publishing
Company (P) Ltd., New Delhi, 2010
6. Kannan P., Ravikrishnan A., ―Engineering Chemistry‖, Sri Krishna Hi-tech
Publishing Company Pvt. Ltd. Chennai, 2009
References:
10. Dara S.S, Umare S.S, ―Engineering Chemistry‖, S. Chand & Company Ltd., New
Delhi 2010
11. Sivasankar B., ―Engineering Chemistry‖, Tata McGraw-Hill Publishing Company,
Ltd., New Delhi, 2008.
168
12. Gowariker V.R. , Viswanathan N.V. and JayadevSreedhar, ―Polymer Science‖, New
Age International P (Ltd.,), Chennai, 2006.
13. Ozin G. A. and Arsenault A. C., ―Nanochemistry: A Chemical Approach to
Nanomaterials‖, RSC Publishing, 2005.
th
14. Zumdahl and Zumdahl, Chemistry, Houghton Mifflin Company, USA, 7 edition,
2007.
169
Differential Calculus of functions of several variables:
Vectors, Vector–Valued Functions, Functions of Several Variables, Partial Derivatives,
Chain Rule, Gradient and Directional Derivatives, Extrema of Functions of Several
Variables, Quadratic Surfaces, Vector Fields and Line Integrals, Double Integrals in
Cartesian and Polar Coordinates, Triple Integrals in Cartesian and Cylindrical and Spherical
Coordinates. Infinite sequence and series, line and surface integral. Basic theorems of vector
calculus (Green‘s Stocks and Divergence). Engineering Applications.
Textbook:-
James Stewart, Essential Calculus, Early Transcendentals, Cengage Learning; 2nd edition,
2012.
References:-
9. Robert T. Smith & Roland B. Minton "Calculus", McGraw-Hill
Science/Engineering/Math; 3rd Edition, 2007.
10. Thomas, ―Calculus‖, Pearson Education, 12th Edition, 2010.
11. Stewart, ―Calculus‖, Thomson, 5th Edition, 2003.
12. Anton- Bivens- Davis, ―Calculus‖, John Wiley, 7th Edition, 2002.
170
Part 1: Electricity and Magnetism; Electric Fields. Gauss's Law. Electric Potential.
Capacitance and Dielectrics. Current and Resistance. Direct Current Circuits. Magnetic
Fields. Sources of the Magnetic Field. Faraday‘s Law. Inductance. Alternating Current
Circuits. Electromagnetic Waves.
Part 2: Light and Optics; The Nature of Light and the Laws of Geometric Optics. Image
Formation. Interference of Light Waves. Diffraction Patterns and Polarization.
Part 3: Modern Physics; Relativity. Introduction to Quantum Physics. Quantum Mechanics.
Atomic Physics. Molecules and Solids. Nuclear Structure.
Textbook:-
5) Hugh D. Young, Roger A. Freedman, University Physics with Modern Physics,
Addison-Wesley; 13th Edition, 2013.
6) Douglas C. Giancoli, Physics For Scientists And Engineers With Modern Physics,
Fourth Edition, Pearson Prentice Hall, 2009.
References:-
Raymond A. Serway and John W. Jewett, Jr., Physics For Scientists And Engineers With
Modern Physics, Seventh Edition, Brooks/Cole-Thomson Learning, 2008.
171
energy conversionsolar cells- wind energy. Batteries and fuel cells:Types of batteries-
alkaline battery- lead storage battery- nickel-cadmium battery- lithium battery- fuel cell H2 -
O2 fuel cell- applications.
Engineering Materials
Abrasives: definition, classification or types, grinding wheel, abrasive paper and cloth.
Refractories: definition, characteristics, classification, properties – refractoriness and RUL,
dimensional stability, thermal spalling, thermal expansion, porosity; Manufacture of alumina,
magnesite and silicon carbide, Portland cement- manufacture and properties - setting and
hardening of cement, special cement- waterproof and white cement–properties and uses.
Glass - manufacture, types, properties and uses.
Fuels and Combustion
Fuel: Introduction- classification of fuels- calorific value- higher and lower calorific values-
coalanalysis of coal (proximate and ultimate)- carbonization- manufacture of metallurgical
coke (Otto Hoffmann method) - petroleum- manufacture of synthetic petrol (Bergius
process)- knockingoctane number - diesel oil- cetane number - natural gas- compressed
natural gas(CNG)- liquefied petroleum gases(LPG)- producer gas- water gas. Power alcohol
and bio diesel. Combustion of fuels: introduction- theoretical calculation of calorific value-
calculation of stoichiometry of fuel and air ratio- ignition temperature- explosive range - flue
gas analysis (ORSAT Method).
TextBooks:
5. Vairam S, Kalyani P and SubaRamesh.,―Engineering Chemistry‖., Wiley India
PvtLtd.,New Delhi., 2011
6. DaraS.S,UmareS.S.―Engineering Chemistry‖, S. Chand & Company Ltd., New Delhi
, 2010
References:
9. 1 Kannan P. and Ravikrishnan A., ―Engineering Chemistry‖, Sri Krishna Hi-tech
Publishing Company Pvt. Ltd. Chennai, 2009
10. AshimaSrivastava and Janhavi N N., ―Concepts of Engineering Chemistry‖, ACME
Learning Private Limited., New Delhi., 2010.
11. RenuBapna and Renu Gupta., ―Engineering Chemistry‖, Macmillan India Publisher
Ltd., 2010.
12. 4 Pahari A and Chauhan B., ―Engineering Chemistry‖., Firewall Media., New Delhi.,
2010
172
5. Ferdinand Beer, E. Russell Johnston, Elliot Eisenberg, David Mazurek, Vector
Mechanics for Engineers: Statics, McGraw-Hill Science/Engineering/Math; 9th
edition, 2009.
6. Ferdinand Beer, E. Russell Johnston, Elliot Eisenberg, Phillip Cornwell, Vector
Mechanics for Engineers: Dynamics, McGraw-Hill Science/Engineering/Math; 9th
edition, 2009.
173
MEC2102 Engineering Drawing I : 3(2, 0, 3)
Prerequisite:- None
Objectives:
5. To provide the student with the experience of geometrical construction and sketching.
6. To provide the student with the principles of orthographic projection, sectional views,
auxiliary views, and writing dimensions.
Description:-
Engineering drawing introduction, types of lines, size of drawing papers, layouts of drawing
sheets, graphics instruments, scales, geometrical construction, orthographic projection,
sectioning, dimensioning, pictorial drawing, conventions. Descriptive geometry locus of a
point, Mange‘s projection, straight line (particular positions), the plane, auxiliary planes, the
positional problems, projection of circle, curved surfaces, intersection of surfaces of
revolution, perspective projection.
Textbook:
Thomas, E.E., Charls, J.V., and Robert J.F., Engineering Drawing and Graphic Technology,
14th edition, McGraw-Hill, 1993.
References:
Colin H., Simmons and Dennis E. Maguire, Manual of Engineering Drawing, 2nd edition,
2004, Elsevier Newnes, Linacre House, Jordan Hill, Oxford OX2 8DP, 200 Wheel Road,
Burlington MA 01803.
174
To provide the student with the principles of mechanics of materials used in most engineering
applications.
Description:-
Introduction, Stress, strain; Hook's law. Moduli of elasticity and rigidity, and Poisson's ratio.
Statical determination of axial force, shear force, bending moment and torque in bars, beams
and circular shafts. Load-shear-moment relationship in beams. Section kinematics; strain and
stress distribution and their resultants. Normal and shear stress distributions in beams of
different shapes. Transformation of stress and strain, Mohr's circle. Spherical and cylindrical
pressure vessels. Elastic buckling of columns.
Textbook:-
Ferdinand Beer, E. Russell Johnston, John DeWolf, David Mazurek, ―Mechanics of
Materials‖, McGraw-Hill Science/Engineering/Math; 6th edition (January 4, 2011).
175
Electronic Materials: Band structure of solids. Conductivity of metals and alloys.
Semiconductors and superconducting materials. Insulators and dielectric properties.
Electrostriction, piezoelectricity and ferroelectricity.
Photonic Materials: Refraction, reflection, absorption and transmission. Luminescence,
Photoconductivity, Lasers, optical fibers in communications.
Magnetic Materials: classification of magnetic materials. Diamagnetic, paramagnetic,
ferromagnetic, ferrimagnetic and super paramagnetic materials. Metallic and ceramic
magnetic materials. Applications of magnetic materials.
Ceramics: Definition, comparative study of structure and properties of Engineering
Ceramics with reference to metallic materials. Toughening mechanisms in ceramics.
Engineering application of Ceramics.
Polymers: Classification of polymers. Thermoplastics, effect of temperature on
thermoplastics, mechanical properties of thermoplastics. Thermosetting polymers and
elastomers.
Composites: Definition; Classification; Particle-reinforced composites and fibre-reinforced
composites. Rule of mixtures; Sandwich structures. Classification of composites on basis of
matrix materials.
Nano-structured Materials: Definition and Introduction to nano- technology. Unique
features of nano-structured materials. Typical applications.
Modern Engineering Materials: Smart materials, Shape memory alloys, Chromic materials
(Thermo, Photo and Electro), Rheological fluids, Metallic glasses.
References:
15. The Science and Engineering of Materials (6 th Edition), by Donald R. Askeland,
Pradeep P. Fulay, Wendelin J. Wright, Cengage Learning, Inc., Stamford, USA.,
(2010)
16. Materials Science and Engineering: An Itroduction (8th Edition), by William D.
Callister, Jr. – Adapted by R. Balasubramaniam. Wiley India (P) Ltd., (2010).
17. Introduction to Physical Metallurgy (2nd Edition), by S H Avner, Tata McGraw Hill
(1997).
18. A Text Book of Nanoscience and Nanotechnology, by Pradeep.T, Tata McGraw Hill,
New Delhi, (2012).
19. Material Science, by S.L. Kakani, New Age International, (2006).
20. Electronic Properties of Materials (4th Edition), by Rolf.E. Hummel, Springer, New
York, (2011).
21. Photonic Crystals: Theory, Applications, and Fabrication, by Dennis W Prather, John
Wiley & Sons, Hoboken, (2009).
176
parallel circuits, phasor diagrams, power and power factor, series and parallel resonance, Q-
factor and bandwidth
Three phase circuits:
Three phase voltage and current generation, star and delta connections (balanced load only),
relationship between phase and line currents and voltages, Phasor diagrams, Basic principle
of wattmeter, measurement of power by two wattmeter method
Time Domain Analysis of RLC circuits
Time domain analysis of R-L and R-C circuits: Forced and natural response, time
constant, initial and final values
Solution using first order equation for standard input signals: Transient and steady state
time response, solution using universal formula
Time domain analysis of R-L-C circuits: Second order forced and natural response and
concept of damping
Frequency domain analysis of RLC circuits
S-domain representation, applications of Laplace Transform in solving electrical networks,
driving point and transfer function,
Poles and Zeros, calculation of residues by analytical and graphical method
Frequency response
Text Books
11. V. N. Mittal and Arvind Mittal ―Basic Electrical Engineering‖ Tata McGraw Hill,
(Revised Edition)
12. Electrical Engineering Fundamentals" by Vincent Del Toro, PHI Second edition
,2011
13. Electronics Devices & Circuit Theory" by Boylestad, Pearson Education India
14. Edward Hughes: Electrical and Electrical Technology, Pearson Education (Tenth
edition)
15. D P Kothari and I J Nagrath ―Theory and Problems of Basic Electrical Engineering‖,
PHI 13 th edition 2011.
Reference Books:
5. B.L.Theraja ―Electrical Engineering ― Vol-I and II,
6. S.N.Singh, ―Basic Electrical Engineering‖ PHI , 2011
177
Ordinary differential equations. Linear equations: Solution space, linear independence,
Wronskians, normal forms. Eigenvalue problems: importance of boundary conditions, formal
and true self-adjointness, completeness of eigenfunctions, Fourier series, continuous spectra
and Fourier integrals. Green Functions: Range-nullspace theorem, Fredholm alternative,
constructing Green functions via jump conditions.
Partial Differential equations. Classification of PDE's. Hyperbolic equations: wave
equation, method of characteristics, shocks and weak solutions. Heat equation: solution by
integral transforms. Elliptic equations: Dirichlet and Neumann problems, Poisson's equation,
Legendre functions, spherical harmonics, Bessel and spherical Bessel functions, examples
from electrostatics.
Integral Equations. Type I and type II Fredholm and Volterra equations, solution via
Fourier and Laplace transforms, Abel's equation. Separable Kernels: compact and Hilbert-
Schmidt operators, Fredholm alternative again. Perturbation methods: Neumann and
Fredholm series.
Textbook:-
7. Kwong Tin Tang, Mathematical Methods for Engineers and Scientists 3: Fourier
analysis, Partial Differential Equations and Variational Methods, Springer; 2007
edition
8. Kwong Tin Tang, Mathematical Methods for Engineers and Scientists 2: Vector
Analysis, Ordinary Differential Equations and Laplace Transforms, Springer; 2007
edition
9. Kwong Tin Tang, Mathematical Methods for Engineers and Scientists 1: Complex
Analysis, Determinants and Matrices, Springer; 2007 edition
178
Introduction to Maxwell relations, Clausius-Clapeyron equation, volume expansivity and
isothermal compressibility, Mayer relation, Joule-Thomson coefficient.
Properties of Steam:
Dryness fraction, enthalpy, internal energy and entropy, steam table, polynomial form of
steam equations and Mollier chart, First law applied to steam processes.
Vapour Power Cycles:
Carnot vapour cycle, Rankine cycle, Ideal reheatRankine cycle, Introduction to cogeneration.
Gas Power Cycles:
Air standard assumptions, Otto cycle, Diesel cycle, dual cycle, Stirling cycle, Ericsson cycle,
Atkinson cycle, Brayton cycle.
Reactive Systems:
Combustion, theoretical and actual combustion processes, enthalpy of formation and enthalpy
of combustion, Adiabatic flame temperature, first law analysis of reactive system.
Textbook:-
Gordon Rogers, Yon Mayhew, Engineering Thermodynamics: Work and Heat Transfer,
Longman Scientific; 4th edition, 1992.
Reference Books:
1. Thermodynamics: An Engineering Approach by Yunus A. Cengel and Michael A
Boles,7e, TMH.
2. Engineering Thermodynamics- A Generalized Approach by P L Dhar, ELSEVIER
3. Thermodynamics by P K Nag, TMH, 5TH Edition
4. Modern Engineering Thermodynamics by Robert T Balmer, ELSEVIER
5. Thermodynamics and Heat Engines by R Yadav, Central Publishing house.
6. Thermodynamics by Onkar Singh, New Age International
7. Thermal Engineering by Mahesh Rathod, McGrawHill Publications
8. Thermodynamics by C P Arora, TMH
9. Thermodynamics by R K Rajput, Laxmi Publications.
10. Schaum's Outlines: Thermodynamics for Engineers by Merle C. Potter
11. Engineering Thermodynamics through Examples by Y V C Rao, Universities Press
(India) Pvt Lt.
12. Fundamentals of Thermodynamics by Moran & Shapiro.
13. Basic Engineering Thermodynamics by Rayner Joel, Longman Publishers
14. Fundamentals of Classical Thermodynamics by Van Wylen G.H. & Sonntag R.E., John
Wiley & Sons.
15. Thermodynamics by W.C. Reynolds, , McGraw-Hill & Co.
16. Holman, J.P. Thermodynamics. McGraw- Hill
17. Basic Engineering \thermodynamics by Zemanski and Van ness, TMH
179
requirements. f) Create blocks of generally required fixtures in electrical wiring. g) Use of
design centre and templates. h) Understand model space and layout space.
Assembly Drawings: Understand the meaning of Sectional views- plan, front elevation and
end elevation. Draw the sectional end and front views of the following machines: i)Main pole
and field coil assembly, ii) Yoke and pole assembly. AC machines: i) Stator of three phase
alternator ii) Rotor of a salient pole alternator (4 pole only) iii) Rotor of a three phase
squirrel cage Induction motor. Draw sectional front elevation and plan of Single phase core
type Transformer. Winding Diagrams: Develop the winding diagrams for the following. DC
Armature windings i) 24 conductors 4 pole Double layer progressive simplex lap winding. ii)
26 conductors 4 pole Double layer progressive simplex wave winding. AC windings i) 3
phase 4 pole 24 conductors full pitch Double layer lap winding. ii) 3 phase 4 pole 24
conductors short pitch Double layer lap winding. Electrical Building Wiring: Prepare the
following drawings as per standard practiced in industries for a Housing complex
OR Commercial complex OR Hotel OR Hospital (Any ONE): i) LT Main Panel board
General Arrangement diagram. ii) Schematic SLD (single line diagram) of LT distribution.
iii) Schematic SLD and layouts for lighting, UPS and power loads. Preparing paper layout
and plotting the drawings.
Textbook:-
180
Course Description:
Electronics (no numericals): Semiconductor diode, Diode rectifier with R load: Half wave,
full wave– center tapped and bridge configuration, RMS value and average value of output
voltage, ripple factor, rectification efficiency, introduction to C and L filter (no derivation).
CE, CB, CC transistor configuration, CE input-output characteristics.
Junction Transistors as Switch
Junction Field Effect Transistor JFET: Construction, pinch off voltage, transfer
characteristic, trans-conductance
Metal-Oxide Effect Transistor (MOSFET): Working of MOSFET, threshold voltage and
MOSFET as switch
BJT: Regions of operation, normally ON and normally OFF state biasing, working of BJT
CE amplifier and BJT as a switch
Single phase transformer:
Construction, working principle, Emf equation, ideal and practical transformer, transformer
on no load and on load, phasor diagrams, equivalent circuit, O.C. and S.C test, Efficiency
DC Motors
Construction, principle of working, significance of commutator and brushes in DC machine,
classification EMF equation, Torque equation, characteristics of DC Motors
Starters for shunt and series motors
Speed Control: basic principle and working of different methods
Three Phase Induction Motor
Construction, working principle of squirrel cage induction motor
Equivalent circuit: Equivalent circuit development, torque speed characteristics, power
Speed control methods
Starting methods: Classification and working of different methods
Low Power Motors
Brushless DC Motors: Unipolar brushless DC motor, Bipolar brushless DC motor, speed
control, important features and applications
Stepper Motors: Constructional features, working principle and applications
Single phase Induction Motors: construction, working, starting methods, tor-speed
characteristics and applications
References:
11. M E Van Valkenburg, ―Network Analysis‖, Prentice-Hall of India Pvt Ltd, New Delhi
12. Donald A. Neamen, Electronic Circuit Analysis and Design, TATA McGraw Hill,
2nd Edition, New Delhi
13. Bimbhra P.S., Electric Machinery , Khanna Publisher, New Delhi
14. M. A. Mazadi and J. C. Mazadi, ―The 8051 Microcontroller and Embedded Systems‖,
Pearson Education, New Delhi
15. John Uffenbeck , ―8086/8088 family: Design Programming and Interfacing‖, Pearson
Education, New Delhi
181
Mass M.I. about centroidal axis and about any other axis. Radius of Gyration. D‘Alemberts
Principle of Bodies under rotational motion about a fixed axis and plane motion. Application
of motion of bars, Cylinders and spheres only. Kinetics of Rigid Bodies: Work and Energy.
Kinetic energy in translating motion, Rotation about fixed axis and in general plane motion,
Work Energy Principle and Conservation of Energy.
Basic Kinematics:
Kinematic link, Types of links, Kinematic pair, Types of constrained motions, Types of
Kinematic pairs, Kinematic chain, Types of joints, Mechanism, Machine, Degree of freedom
(Mobility), Kutzbachcrieterion, Grubler‘s criterion. Four bar chain and its inversions,
Grashoff‘s law, Slider crank chain and its inversions, Double slider crank chain and its
inversions.
Special Mechanisms: Straight line generating Mechanisms:
Exact Straight Line Generating Mechanisms – Peaucellier‘s and Hart‘s Approximate Straight
Line Generating Mechanisms – Watt‘s, Grasshopper and Tchebicheff‘s.
Offset slider crank mechanisms, Pantograph. Hook joint- single and double
Steering gear mechanisms – Ackerman, Davis
Velocity Analysis of mechanisms (mechanisms up to 6 links).
Velocity analysis by instantaneous center of rotation method (Graphical approach)
Velocity analysis by relative velocity method (Graphical approach). Analysis is extended to
find rubbing velocities at joints, mechanical advantage (Graphical approach).
Velocity analysis of low degree complexity mechanisms (Graphical approach). Auxiliary
point method
Velocity and Acceleration analysis of mechanism.
Velocity and Acceleration – analysis by relative method (mechanismsup to 6 link) including
pairs involving Coriolis acceleration (Graphical Approach).
Cam Mechanisms:
Cam and its Classifications.
Followers and its Classification.
Motion analysis and plotting of displacement-time, velocity-time, acceleration- time, jerk-
time graphs for uniform velocity. UARM, SHM and Cycloid motions (combined motions
during one stroke excluded).
Motion analysis of simple cams – R-R cam, D-R-R and D-R-D-R cam-operating radial
translating follower.
Pressure angle and method to control pressure angle
Layout of cam profiles.
Flexible Connectors:
Belt – Types of belts, velocity ratio, slip & creep, length of belt for open & cross system.
Law of belting, Dynamic analysis- driving tensions, centrifugal tension, initial tension,
condition of maximum power transmission.
Chains – types of chains, chordal action, variation in velocity ratio, Length of chain
Gears
Law of gearing, Involute and Cycloid gear tooth profile, Construction of Involute profile.
Path of contact, arc of contact, contact ratio for involutes and cycloidal tooth profile,
Interference in involutes gears. Critical Numbers of teeth for interference free
motion.Methods to control interference in involutes gears.
Static force analysis in gears- spur, helical, worm & worm wheel.
References:
1. Theory or Mechanisms and Machines by Amitabh Ghosh and A. Kumar Mallik.
2. Theory of Machines and Mechanism by John Uiker, Garden Pennock& Late. J. F.
shigley
182
3. Theory of Machines – P. L. Ballaney
4. Theory of Machines by S. S. Rattan
5. Kinematics of Machines by R T Hinckle (Prentice Hall Inc.)
6. Kinematics By V.M. Fairs (McGraw Hill)
7. Mechanism Design: Analysis and Synthesis Vol. I by A. Erdman and G.N. Sander
(Prentice Hall)
8. Kinematics and Dynamics of Planer Mechanisms by Jeremy Hirsihham (McGraw Hill).
183
Aerofoil theory: Definition of aerofoil, lift and drag, stalling of aerofoils, induced drag
Compressible Fluid flow:
Propagation of sound waves through compressible fluids, Sonic velocity and Mach number;
Application of continuity , momentum and energy equations for steady state conditions;
steady flow through nozzle, isentropic flow through ducts of varying cross-sectional area,
Effect of varying back pressure on nozzle performance, Critical pressure ratio
Normal shocks, basic equations of normal shock, change of properties across normal shock
References:
1. Fluid Mechanics : Streeter and Wylie, McGraw Hill
2. Fluid Mechanics : F.M.White, McGraw Hill
3. Fluid Mechanics: K.L.Kumar
4. Introduction to Fluid Mechanics: Fox and McDonald
5. Introduction to Fluid Mechanics: James.A.Fay
6. Prandtl Essentials of Fluid Mechanics :Herbert Oertel(Ed)
7. Fluid Mechanics: B.M.Massey
8. Fluid Mechanics: Cengel and Cimbala
9. Mechanics of Fluids: Irving Shames
10. Advanced Fluid Dynamics: Muralidhar and Biswas
11. Fluid Mechanics and Hydraulics, S. K. Ukarande, Ane Books Pvt.Ltd.
184
To provide the student with the basic tools of numerical techniques
Description:-
Advanced introduction to numerical linear algebra and related numerical methods. Topics
include direct and iterative methods for linear systems, eigenvalue decompositions and
QR/SVD factorizations, stability and accuracy of numerical algorithms, the IEEE floating-
point standard, sparse and structured matrices, and linear algebra software.
Basic numerical calculus: Elementary methods for obtaining accurate numerical estimates
of integrals of Ordinary Differential Equations (ODEs), derivatives, and infinite sums.
Extrapolation, interpolation, root-finding, optimization, and evaluation of special functions.
Nonlinear optimization, numerical integration, FFTs, and sensitivity analysis.
Textbook:-
Steven Chapra, Raymond Canale, Numerical Methods for Engineers, McGraw-Hill
Science/Engineering/Math; 6th edition, 2009.
185
convective heat transfer, Empirical correlations for convection, Physical significance of
various dimensionless numbers useful in natural and forced convection
Radiation
Thermal radiation, Blackbody radiation, Radiation intensity, Radiative properties, Basic laws
of radiation (Plank‘s law, Kirchoff‘s law, Stefan-Boltzman law, Wien‘s displacement law,
Lambert‘s cosine law, Radiation exchange between black surfaces, Shape factor, Radiation
exchange between gray surfaces, Radiosity- Irradiation method, Radiation shield and the
radiation effect
Boiling and Condensation
Boiling heat transfer, Pool boiling, Flow boiling, Condensation heat transfer, Film
condensation, Drop wise condensation
Heat Exchangers
Types of heat exchangers, Overall heat transfer coefficient, Analysis of heat exchangers,
LMTD method, Effectiveness-NTU method, Correction factor and effectiveness of heat
exchangers
References
1. Introduction to Thermodynamics and Heat Transfer, 2nd ed., Yunus A Cengel, McGraw
Hill International.
2. Fundamentals of Heat and Mass Transfer, F. P. Incropera and D. P.DeWitt, Wiley India
3. Heat and Mass Transfer, 2nd ed., R Rudramoorthy and L Mayilsamy, PEARSON
4. Fundamentals of Engineering Heat and Mass Transfer, 4th ed., R C Sachdeva, New Age
International
5. Heat Transfer, 2nd ed., A F Mills and V Ganesan, PEARSON
6. Heat Transfer, 9th ed., J P Holman, McGraw Hill
7. Engineering Heat and Mass Transfer, Mahesh M Rathore, Laxmi Publication
8. Principles of Heat Transfer, 6th ed., Frank Kreith, CENGAGE Learning
9. Heat and Mass transfer, 6th ed.,D S Kumar, S K Kataria and Sons
10. Heat Transfer, S P Sukhatme, University Press
11. Heat and Mass Transfer, 2nd ed., P K Nag, Tata McGraw Hill
12. Fundamentals of Heat and Mass Transfer, Thirumaleshwar, Pearson Education
13. Engineering Heat Transfer, N V Suryanarayana, Penram Publication
14. Heat and Mass transfer, C P Arora, Dhanpatrai and Co.
15. Heat Transfer, Y V C Rao, University Press
16. Heat and Mass Transfer, R K Rajput, S.Chand and Company
17. Elements of Heat Transfer, Jakole and Hawkins
18. Heat Transfer, James Sueee, JAICO Publishing House
19. Heat Transfer, Donald Pitts & L E Sisson, Schaums Series, Mc Graw Hill International
20. Engineering Heat Transfer, Shao Ti Hsu
21. Heat Transfer, M Necati Ozisik, McGraw Hill International edition
22. Heat Transfer, Ghosdastidar, Oxford University Press
:هطلىثبد سبثمخ
أزمبي اٌؾواهح
.خ٠خ اٌؾواه١ِٕب٠ اٌل
:الهذف
.ُٞ ٔظُ إٌمً اٌؾواه١ّ رظٟخ ف١م١ؼبة اٌّوؽٍخ اٌزطج١ الٍزٟاٌَؼ
186
:هفرداد الومرر
خ٠ أِضٍخ اٌّجلالد اٌؾواهٚ ُ١ّ رظ
ف١ اٌزىضٚ اٌزجقوٚ ْب١ٍ اٌغ
كاهاد اٌجقبه
ل٠ كاهاد اٌزجو
و اٌّزفبػٍخ١عبد غٚ اٌّّي
.ِٞزوٚىو١ٌَ ا
:التجبرة الوعوليخ
. ٞ كاهح ِجبكي ؽواهٍٝ افزجبه ػ
.ل٠ كاهح رجوٍٝ افزجبه ػ
References:
3. Holman, J.P, Heat Transfer, McGraw-Hill
4. Trot & Welsh, Refrigeration & Air Conditioning, Butterworth-Heinmann.
187
Gear Trains: Kinematics and dynamic analysis of - simple gear trains, compound gear
trains, reverted gear trains, epi-cyclic gear trains with spur or bevel gear combination.
Transmissions: Necessity of gear box, Sliding mesh, Constant mesh, Synchromesh and
epicyclic gear box,
Static and Dynamic force analysis in slider crank mechanism (neglecting mass of
connecting rod and crank), Engine force analysis, Turning moment on crank shaft.
Dynamically equivalent systems to convert rigid body to two mass with and without
correction couple.
Flywheel and its applications, Fluctuation in energy, function of flywheel , estimating
inertia of flywheel for reciprocating prime movers and machines.
References
1. Theory of Machines - Thomas Bevan - C. B. S. Publishers
2. Theory of Machines - S. S. Ratan - Tata McGraw Hill
3. Theory of Machines - P. L. Ballaney, Khanna Publishers, Delhi
4. Dynamics of Machines – Norton, McGraw Hill Publication
5. Theory of Mechanisms and Machines - A. Ghosh and A. Malik - Affiliated East – West
Press Pvt. Ltd., New Delhi
6. Theory of Machines - W. G. Green – Bluckie & Sons Ltd.
7. Mechanics & Dynamics of Machinery - J. Srinivas, Scitech
8. Kinematics, Dynamics and Design of Machinery, 2nd ed., Kenneth Waldron, Gary Kinzel,
Wiley India Edition
9. Essential MATLAB for Engineers and Scientist - Brian D. Hanhn, Daniel Valentine,
188
Powder Metallurgy: like sintering and metal injection molding: Principle, process,
applications, advantages and disadvantages of powder metallurgy, Processes of powder
making and mechanisms of sintering.
Moulding with polymers: Basic concepts related to Injection Moulding, Compression
moulding, Transfer moulding, Blow Moulding, Rotational Moulding, Thermoforming and
Extrusion. Applications of plastics in Engineering field.
Moulding with ceramics: Blow moulding and extrusion of glass.
Non Destructive Techniques: Dye Penetrant, Magnetic, Electrical, Ultrasonic and
Radiographic non-destructive testing methods.
References:
1. Workshop Technology By W. A. J. Chapman part I, II & III
2. A Textbook of Foundry Technology by M. Lal
3. Production Technology by R. C. Patel and C. G. Gupta Vol I, II.
4. Production Technology by Jain & Gupta.
5. Manufacturing, Engineering and Technology SI by SeropeKalpakjian, Steven R. Schmid,
published by Prentice Hall
6. Introduction to manufacturing processes by John A. Schey, published by McGraw-Hill
7. Manufacturing Processes & Materials for Engineers by Doyle.
8. Production Technology by HMT.
9. Production Technology by Raghuvanshi
10. Elements of Workshop Technology HazraChaudharyVol I, II.
11. Foundry technology by P.L. Jain .
12. Manufacturing processes by P. N. Rao, Vol. 1 and 2.
13. ASME Handbook Vol. 15 and 16.
14. Welding Technology by Little
189
Comparators: Inverting comparator, non-inverting comparator, zero crossing detector,
window detector and level detector.
Schmitt Triggers: Inverting and non-inverting Schmitt trigger
Waveform Generators: Square wave generator and triangular wave generator with duty
cycle modulation
Precision Rectifiers: Half wave and full wave precision rectifiers and their applications.
Peak Detectors, Sample & Hold Circuits, voltage to frequency converter, frequency to
voltage converter, logarithmic converters and antilog converters
Data Converters
Analog to Digital: Performance parameters of ADC, Single Ramp ADC, ADC using DAC,
Dual Slope ADC, Successive Approximation ADC, Flash ADC, ADC0808/0809 and its
interfacing
Digital to Analog: Performance parameters of DAC, Binary weighted register DAC, R/2R
ladder DAC, Inverted R/2R ladder DAC, DAC0808 and its interfacing
Special Purpose Integrated Circuits
Functional block diagram, working, design and applications of Timer 555.
Functional block diagram, working and applications of VCO 566, PLL 565, multiplier 534,
waveform generator XR 2206, power amplifier LM380.
Voltage Regulators
Functional block diagram, working and design of three terminal fixed (78XX, 79XX series)
and three terminal adjustable (LM 317, LM 337) voltage regulators.
Functional block diagram, working and design of general purpose 723 (LVLC, LVHC,
HVLC and HVHC) with current limit and current fold-back protection, Switching regulator
topologies, Functional block diagram and working of LT1070 monolithic switching regulator.
References:
18. Sergio Franco, ―Design with operational amplifiers and analog integrated circuits‖,
Tata McGraw Hill, 3rd Edition.
19. William D. Stanley, ―Operational Amplifiers with Linear Integrated Circuits ‖,
Pearson, 4th Edition
20. D. Roy Choudhury and S. B. Jain, ―Linear Integrated Circuits‖, New Age
International Publishers, 4th Edition.
21. David A. Bell, ―Operation Amplifiers and Linear Integrated Circuits‖, Oxford
University Press, Indian Edition.
22. Ramakant A. Gayakwad, ―Op-Amps and Linear Integrated Circuits‖, Pearson Prentice
Hall, 4th Edition.
23. R. P. Jain, ―Modern Digital Electronics,‖ Tata McGraw Hill, 3rd Edition.
24. Ron Mancini, ―Op Amps for Everyone‖, Newnes, 2nd Edition.
25. J. Millman and A. Grabel, ―Microelectronics‖, Tata McGraw Hill, 2nd Edition.
26. R. F. Coughlin and F. F. Driscoll, ―Operation Amplifiers and Linear Integrated
Circuits‖, Prentice Hall, 6th Edition.
27. J. G. Graeme, G. E. Tobey and L. P. Huelsman, ―Operational Amplifiers- Design &
Applications‖, NewYork: McGraw-Hill, Burr-Brown Research Corporation.
190
6. To present the main building blocks of electronic measurement systems, including
amplifiers, filters, and transmission media.
Description:-
Principles and systems of measurements of current , voltage, power, resistance, capacitance,
inductance, energy, phase angle, frequency, and time at different frequencies ( direct current,
radio frequencies , microwave frequencies and optical frequencies). Measurements of field
strength, signal to noise and interference ratio, attenuation, and frequency response of
materials and systems at high frequencies.
Op Amp Circuits for Electronic Instrumentation. Signal Conditioning and Transmission.
Active Filter Design. Noise Reduction Techniques. Sensors. Digital & analogue techniques.
Instrumentation in industrial & harsh environments
Textbook:-
A.K. Sawhney, " A Course in Electrical and Electronic Measurements and Instrumentation",
DHANPAT RAI, Seventeenth Edition, 2004
References:-
13. Martin U, Reissland, Electrical Measurements: Fundamentals, Concepts, and
Applications, New Age International Publishers, New Delhi, 2003
14. Kalsi—Electronic Instrumentation , TMH
15. P.P.L. Regtien, Electronic instrumentation, Delft Academic Press, VSSD, Hill, 2005.
16. Analysis and Application of Analog Electronic Circuits to Biomedical
Instrumentation, Robert B. Northrop, CRC PRESS, 2004, ISBN: 0-8493-2143-3
17. Fundamentals of Instrumentation and Measurement, Ed. Dominique Placko, ISTE
Ltd, 2007.
18. Ramon Pallas-Areny, John G. Webster, Sensors and Signal Conditioning, Wiley-
Interscience; 2nd edition, 2000.
191
One- and two-sample estimation problems (Statistical Inference, Classical Methods of
estimation, Estimating mean for one sample, Standard error of a point estimate, Prediction
Interval, Estimating the difference between two means for two samples, Estimating a
Proportion for single proportion, determination of the sample size at a specified error,
Estimating a Proportion for two proportions).
One and Two-sample tests of hypotheses (Null and Alternative hypotheses, type I error,
type II error, One and two tailed tests, P-value, Tests concerning a single mean, Tests on two
means, Test on a single proportion).
Simple linear regression (Least squares and the fitted model, Properties of the least squares
estimators, Inferences concerning the regression coefficients, prediction).
Textbook:-
Walpole, Myers, Myers & Ye, Probability & Statistics for Engineers and Scientists; Pearson;
9th edition, 2011.
192
6. Machine Design - Reshetov - Mir Publication
7. Machine Design - Black Adams-Mcgraw Hill
8. Fundamentals of Machine Elements - Hawrock, Jacobson Mcgraw Hill
9. Machine Design - Patel, Pandya, Sikh, Vol. - I & II, C.
10. Design of Machine Elements - V.M. Faires
11. Design of Machine Elements - Spotts.
:الهذف
.ُٞ ٔظُ إٌمً اٌؾواه١ّ رظٟخ ِزملِخ ف١م١ؼبة ِوؽٍخ رطج١ الٍزٟاٌَؼ
:هطلىثبد سبثمخ
1 خ٠ٕ٘لٍخ ؽواه
:هفرداد الومرر
أٌٍ االؽزواق
ً اٌّواعٟ أزمبي اٌؾواهح فٚ االؽزواق
:التجبرة الوعوليخ
.كٛلٌٛ خ٠ّخ اٌؾواه١ل اٌم٠ ٌزؾلٞو١اٍزقلاَ اٌَّؼو اٌزفغ
:الكتبة الوٌهجي
ElMahalawi & Habik, Fundamentals & Technology of Combustion, Elsevier.
193
combined with reaming, spot facing etc. design of milling fixtures such as plain, string, gang
and indexing types. Design of turning fixtures.
Non-traditional Machining: Ultrasonic Machining (USM), Abrasive Jet Machining
(AJM),Water Jet Machining, Electrochemical Machining (ECM),Chemical Machining
(CHM)Electrical Discharge Machining (EDM),Plasma Arc Machining (PAM),Laser Beam
Machining (LBM),Electron Beam Machining (EBM), Arc cutting processes and Oxy fuel
cutting process.
Plastics Injection Mold Design: General arrangement of an injection mold, Basic systems of
the mold – Feeding system, cooling system and ejection systems, Concepts of three plate
molds and tooling for moulding articles with undercuts, Concepts of split molds, hot runner
systems – Their advantages and limitation over conventional systems. Basic concepts of mold
standardization and innovative mold components.
Agile Manufacturing Technologies: Introduction, Developing agile manufacturing,
Integration of Product/Process Development, Application of IT/IS concepts, Agile supply
chain management, Design of skill and knowledge and Computer control of Agile
manufacturing. Flexible manufacturing systems.
References
1. Mechanical Metallurgy, G E Dieter ,McGraw Hill.
2. Jigs and Fixtures, P H Joshi, Mc Graw Hill.
3. Production Technology, R C Patel & C G Gupte.
4. Production Technology, HMT, Tata Mc Graw Hill.
5. Introduction to Jigs and Tool design, HA Kempster, Butterworth Heinemann Ltd.
6. Manufacturing Process, R A Lindberg, PHI India.
7. Agile Manufacturing- Forging Mew Frontiers, Poul T Kidd,Amagow Co. UK.
8. Agile Manufacturing, AGunasekharan, the 21st Century Competitive strategy, Elsevier
Press,India.
9. Stereo Lithography and other RP & M Technologies, Paul F.Jacobs: SME, NY 1996.
10. Rapid Manufacturing, Flham D.T &Dinjoy S.S Verlog London2001.
11. Fundamentals of modern Manufacturing, Fourth Edition, Mikell P Groover, John Wiley
& Sons.
12. Metals handbook ,Forming and Forging, Vol. 14, ASM.
:الهذف
.خ١ى١ٔىب١ٌِّبد اٛاء ٌٕمً اٌملهح كافً إٌّظٌٛٙ اٚ دٛ٠ٍبً الٍزقلاَ اٌي٤اػل اٛبْ اٌم١ث
:هطلىثبد سبثمخ
ائغٌّٛىب ا١ٔىب١ِ
.1 الد٢ىب ا١ٔىب١ِ
:هفرداد الومرر
ٍٟطً ٍبئِٛ لبػلح ٔمً اٌملهح ػجو
ٍٟ ػٕبطو إٌمً اٌَبئ
ٍِٟبد ٔمً ٍبئٛ ِٕظ
ٟائٛ٘ ًطِٛ لبػلح ٔمً اٌملهح ػجو
ٟائٌٛٙ ػٕبطو إٌمً ا
ٟائٛ٘ ًِبد ٔمٛ ِٕظ
194
:التجبرة الوعوليخ
.خ١ى١ٔىب١ٌّخ اٌفبئلح ا٠ك ٔظو١ ٌزؾمٍِٟخ ٔمً ٍبئٛاٍزقلاَ ِٕظ
:الكتبة الوٌهجي
Thomas E. Scot, Power Transmission, Prentice Hall.
:الهذف
.ٍٟٕلٌٙ اٌّغبي اٟائغ اٌَّزقلِخ فٌّٛالد ا٢ ٍّٟ ػٚ ُٞ ٔظوٙـ ف١ٍ روٚ ائغٌّٛخ ٌؼًّ آالد ا٠اٍزقالص اٌمبػلح إٌظو
:هطلىثبد سبثمخ
ائغٌّٛىب ا١ٔىب١ِ
.ًٞ اٌؼلك١ٍ اٌزؾ
:هفرداد الومرر
ائغٌّٛالد ا٢ ًٍب٤خ ا٠ إٌظو
ٕبد١هثٛ اٌزٚ ف اٌّؼقبد١ٕ رظ
ىاؽخ٦عجخ اِٛ اٌّؼقبد
خ١ٔهاٚ اٌّؼقبد اٌل
خ١ٕبد اٌّبئ١هثٛ اٌز
.اءٌٛٙاغؾ اٛ ػ
:التجبرة الوعوليخ
:الد٣ٌ ْب٠ اٌىفبءح ِغ ِؼلي اٌَوٚ ٌؼاللخ اٌؼغؾٍّٟ افزجبه ِؼ
اٌّؼقخ إٌبثنح .vii
خ٠هٛاٌّؼقخ اٌّؾ .viii
خ٠اٌّؼقخ اٌزوكك .ix
ٌ١َٔٓ فوا١هثٛ ر.x
ْٓ وبثال١هثٛ ر.xi
.خ ٌٍّؼقخ إٌبثنح١فٙاٌقظبئض اٌزى .xii
:الكتبة الوٌهجي
Streeter & Wylie, Fluid Mechanics, McGraw-Hill.
Massey, Mechanics of Fluids, Van Rheinhold.
195
Description:-
Managerial roles and personal effectiveness. Business functions , the contribution of
marketing, finance, operations, human resource management, research and development,
purchasing, exporting and industrial relations. Business activities , commercial law. Business
transactions , contract law. Managerial responsibilities , health and safety. Costing and
financial statements. Financial planning. Sources of finance. Management strategy,
leadership and vision. Managing change.
Textbook:-
John V. Chelsom, Andrew C. Payne, Lawrence R. P. Reavill, Management for Engineers,
Scientists and Technologists, John Wiley & Sons; 2nd Edition, 2004.
References:-
W Nel, Management for Engineers, Technologists and Scientists, John Wiley & Sons, 2007.
196
MEC4124 Internal Combustion Engines: 2(2, 1, 0)
Prerequisite:- None
Objective:-
1. Study of air standard and actual engine cycles.
2. Study of SI and CI engine components and processes involved
3. Study and analysis of engine performance characteristics and engine emissions
Description:-
Introduction
Heat engines; Internal and external combustion engines; Classification of I.C. Engines; Cycle
of operations in four strokes and two-stroke IC engines and their comparative study;
Scavenging and scavenging blowers, Air standard cycles and Fuel air cycles, Variable
specific heat and its effects, Dissociation and other losses, Actual cycles, Deviation of actual
engine cycle from ideal cycle
Spark Ignition Engines
A. Carburetors and fuel injection system in S I Engines :Theory of carburetion, Simple
carburetor, Essential parts of modern carburetor, Types of carburetors, Types of fuel injection
systems in S I engines, Continuous injection system, Timed injection system, Electronic
Fuel-Injection systems (EFIs), Advantages and disadvantages of SI engine fuel injection
system
B. Ignition Systems : Spark Plug and its requirements, Battery, Magneto, Electronic ignition
systems
C. Combustion: Combustion phenomenon in SI Engines, Ignition delay, Flame propagation,
Pressure-Crank angle diagram, Abnormal combustion, Auto ignition, Detonation and
Knocking, Factors affecting combustion and detonation, Types of combustion chambers
Compression Ignition Engines
A. Fuel Injection Systems : Types i.e. Air injection systems, Airless/solid injection systems,
Common rail, individual pump, distributor and unit injector etc, Injection pumps, Fuel
injector, Types of nozzle, Electronically controlled unit fuel injection system, C I Engine
Governors: necessity and characteristics
B. Combustion : Combustion phenomenon in C I engines, Stages of combustion, Delay
period, Knocking, Pressure-Crank angle diagram, Factors affecting combustion and
knocking, Types of combustion chambers
Engine lubrication : Types of lubricants and their properties, SAE rating of lubricants,
Types of lubrication systems
Engine Cooling : Necessity of engine cooling, disadvantages of overcooling, Cooling
systems and their comparison: Air cooling, Liquid cooling
Supercharging/Turbo-charging : Objectives, Effects on power output and engine
efficiency, Methods, Types, Limits
Engine Testing and Performance: Measurement of Break Horse Power, Indicated Power,
Fuel Consumption, Air flow, BMEP, Performance characteristic of SI and CI Engines, Effect
of load and Speed on mechanical, indicated thermal, break thermal and volumetric
efficiencies, Heat balance sheet
Exhaust Emissions: Exhaust gas analysis and methods, necessity, constituents, Air pollution
due to engine exhaust, Pollution control devices and EURO, BHARAT standards
Fuels: SI and CI engine fuels, Rating of fuels, Non conventional fuels: CNG, LPG, Bio-fuels,
Hydrogen, Alcohol etc
Alternative Potential Engines: Stratified charge engine, Wankel engine, Free-piston engine,
Stirling engine, VCR engine, Dual fuel engines, Multi fuel engines
Modern Trends in I C Engines
197
References
1. Internal Combustion Engines, Willard W.Pulkrabek, Pearson Education.
2. Internal Combustion Engines, Shyam Agrawal, New Age International
3. Internal Combustion Engine, Mathur and Sharma
4. Internal Combustion Engines, Mohanty, Standard Book House
5. Internal Combustion Engine, Gills and Smith
6. Internal Combustion Engines Fundamentals, John B. Heywood
7. Internal Combustion Engines, Gupta H N, 2nd ed, PHI
8. Internal Combustion Engine, V Ganesan - TataMcGraw Hill
9. Internal Combustion Engines, Richard Stone - Palgrave Publication
10. Internal Combustion Engine, S.L. Beohar
11. Internal Combustion Engine, P.M Heldt.
12. Internal Combustion Engines, V.L. Maleeve
13. Internal Combustion Engine, E.F. Oberi.
14. Internal Combustion Engine, Domkundwar
198
CAE includes mass property calculations, kinematic analysis and animation (movement,
visualization, simulation and FEA). Case study based on modeling and analysis of structural,
thermal/fluid, and dynamic (vibration analysis) system. Parameter optimization.
References:
26. ―CAD/CAM Computer Aided and Manufacturing‖ by Mikell P. Groover and Emory
W. Zimmers, Jr., Eastern Economy Edition
27. ―CAD/ CAM , Theory & Practice‖ by Ibrahim Zeid, R. Sivasubramanian, Tata
McGraw Hill Publications
28. ―Computer Graphics‖ by Donald Hearn and M. Pauline Baker, Eastern Economy
Edition
29. ―CAD/CAM Principles, Practice and Manufacturing Management‖ by Chris
McMahon, Jimmie Browne, Pearson Education
30. ―CAD/CAM/CIM‖ by P. Radhakrishan, S. Subramanyan, V. Raju, New Age
International Publishers
31. ―CAD/CAM Principles and Applications‖ by P.N. Rao, Tata McGraw Hill
Publications
32. ―Principle of Computer Graphics‖ by William .M. Neumann and Robert .F. Sproul,
McGraw Hill Book Co. Singapore.
33. David L. Goetsch, Fundamental of CIM technology ,Delmar publication
34. David Bedworth, Computer Integrated Design and Manufacturing, McGraw Hill.
35. ―CNC Machines‖ by B.S. Pabla and M. Adithan, New Age International Publishers.
36. ―Numerical Control and Computer Aided Manufacturing‖ , T.K. Kundra, P.N. Rao,
N.K. Tiwari, Tata McGraw Hill
37. ―CNC Technology and Programming‖, Krar, S., and Gill, A., McGraw Hill publishers
199
Forced Single Degree of Freedom Vibratory System: Analysis of linear and torsional
systems subjected to harmonic force excitation and harmonic motion excitation (excluding
elastic damper)
Vibration Isolation and Transmissibility: Force Transmissibility, Motion Transmissibility
Typical isolators& Mounts
Rotor Dynamics: Critical speed of single rotor, undamped and damped.
Vibration Measuring Instruments: Principle of seismic instruments, vibrometer,
accelerometer - undamped, damped. Introduction to Conditioning Monitoring and Fault
Diagnosis.: At least two case studies in detail based on Conditioning Monitoring and Fault
Diagnosis.
Balancing: Static and dynamic balancing of multi rotor system, Balancing of reciprocating
masses In - line engines, V - engines (excluding radial engines)
References
1. Mechanical Vibrations 4th ed- S. S. Rao - Pearson Education
2. Mechanical Vibrations - G. K. Grover
3. Fundamentals of Mechanical Vibration - S.Graham Kelly - Tata McGraw Hill 4.
4. Vibration Analysis - P. Srineevasan - Tata McGraw Hill
5. Mechanical Vibrations - Schaum's outline series - S.Graham Kelly- McGraw Hill
1. Mechanical Vibrations - Schaum's outline series - William W. Seto- McGrmvHill .
2. Theory and Practice of mechanical vibrations - J. S. Rao, K. Gupta - New Age
International Publications.
3. Mechanical Vibrations - Den; Chambil, Hinckle
4. Mechanical Vibrations, J.P. Den Hartog, McGrawhill Book Company Inc.
5. Leonard Meirovitch, Introduction to Dynamics and Conti'oJ. Wiley, New York,
6. Leonard Meirovitch, Elements of Vibration Analysis. McGrmv-Hill, New York,
7. Leonard Meirovitch, Dynamics and Control of Structures. Wiley, New York. 4. Antony J.
Pettofrezzo, Matrices and Transformations. Dover, New York.
8. Benson H. Tongue, Principles of Vibration. Oxford University Press.
9. W. Thomson, Theory of Vibrations with Applications, Second Edition, Pearson Education
10. Vibrations-BalakumarBalachandan, Edward Magrab, CENGAGAE Learning.
هطلىثبد هسبثمخ
ائغٌّٛىب ا١ٔىب١ِ
.2 خ٠خ ؽواه١ِٕب٠ ك
هفرداد الومرر
خ١رٛعبد اٌظٌّٛ ؽووخ ا
ٞل٠ اٌالرجلٟٔؼغبؽ٦بْ ا٠ اٌَو
اٌظلِخ اٌّزؼبِلح
ٟ االؽزىبؤٟؼغبؽ٦بْ ا٠ اٌَو
ّٟ اٌالوظٟٔؼغبؽ٦بْ ا٠ اٌَو
.ٟٔؼغبؽ٦بْ ا٠ اٌَوٟبً اٌَوػخ ف١ل
التجبرة العوليخ
200
ٟبْ أؼغبؽ٠ اٌَوػخ ٌَوٚ بً اٌؼغؾ١ ل
.1.2 قٛف٠ ػلك ِبؿٜ ِلٟ فٟبْ أؼغبؽ٠ػبلخ ٌَو٦بً ا١ ل
.ٟبْ أؼغبؽ٠مبد ٍو١ائغ ثزطجٌٍّٛجخ اِٛؼًّ ؽ
الكتبة الوٌهجي
.ِبدٍٛ شجىخ اٌّؼٚ 2111 ،َٛ ِطجؼخ عبِؼخ اٌقوؽ،ائغٌّٛىب ا١ٔىب١ِ ،ك٠ دمحم ٘بشُ طل
Massey, Mechanics of Fluids, Van Rheinhold.
201
1. Norman S. Nise, Control Systems Engineering, Wiley; 6th edition, 2010.
2. Doyle, John, Bruce Francis, and Allen Tannenbaum, Feedback Control Theory,
Dover, 2009.
3. Charles L. Phillips, John Parr, Feedback Control Systems, Prentice Hall; 5th edition,
2010.
202
1. Practical Boiler Operation Engineering and Power Plant, A R Mallick, 3rd ed, PHI
Learning
2. Thermal Engineering, Ballaney, Khanna Publishers, Reprint 1994
3. Thermal Engineering, Kothandraman, Domkundwar, Khajuria, Arora, Dhanpatrai& Sons.
4. Turbines, Compressors & Fans, S M Yahya, TMH
5. Thermal Engineering, R K. Rajput, Laxmi Publication
6. Steam and gas turbine, R Yadav
7. Fluid Mechanics and Hydraulic Machinery, Modi and Seth, Standard Book House
8. Hydraulic Machinery, JagdishLal
9. Hydraulic Machines, Vasandani
10. Fluid Mechanics and Machinery-B C S Rao, McGraw Hill
11. Fluid Mechanics and hydraulic Machines, Gupta, Pearson Education
12. Principles of Thermodynamics, H.A. Sorensen, Amerimal Publications, 1972.
13. Applied Thermodynamics for Engineers and Technologists, Eastop and Mcconky
Longman,1978
14. Hydraulic Turbines - Nechleba
203
Mechatronics case studies: Autonomous Mobile Root, Wireless Surveillance Balloon, Fire
Fighting robots, Cantilever beam vibration control using piezo sensors and actuators, Car
engine management, pick and place robot, automatic camera, CNC machine
References
1. Mechatronics, Kenji Uchino and Jayne R. Giniewicz, publication: Marcel Dekker, Inc.
2. Applied Mechatronics- A. Smaili and F. Mrad, OXFORD university press.
3. Mechatronics System Design , Shetty and Kolk, Cengage Learning, India Edition
4. Introduction to Mechatronics and Measurement Systems, Alciatore and HistandTata
McGraw-Hill
5. Mechatronics,Necsulescu, Pearson education.
204
3. Equipment planning for TPM Maintenance Prevention Design, Goto F, Productivity Press.
4. Total Productive Maintenance for Workshop Leaders, Shirose K., Productivity Press.
5. TPM for Operators,Shirose, K., Productivity Press.
6. New Directions for TPM, Suzuki, T., Productivity Press.
7. Maintenance Planning and Control, Kelly, A, Butterworth, London.
الهذف
:ٍٝاوزَبة اٌملهح ػ
. ِؾطبد اٌؼـٚ ائغٌِّٛبد آالد اُٛ ِٕظ١ّٓ اٌطبٌت ِٓ رظ١رّى
هطلىثبد سبثمخ
. ائغٌّٛآالد ا
هفرداد الومرر
ُ ِؾطبد اٌؼـ١ّ رظ
ائً اٌٍيعخٌَٛ ػـ ا
اغؾِٛبد اٌؼُٛ ِٕظ١ّ رظ
ْكاٌَٛ اٟخ ٌّؾطبد اٌؼـ ف١ٍ ؽبالد كها
205
.خ١خ ٌّؾطبد اٌملهح اٌّبئ١ٍؽبالد كها
الكتبة الوٌهجي
Garr M. Jones PE Dee, Robert L. Sanks, Pumping Station Design, Butterworths.
Skrotzki, Vopat, Power Station Engineering and Economy, Tata McGraw Hill.
206
3. Turbines, Compressors & Fans by S M Yahya, Tata Mc graw Hill
4. Hydraulic. Machinery - JagdishLal
5. Industrial Energy Management and Utilisation, L.C.Witte, P.S.Schmidt, D.R.Brown ,
Hemisphere Publ, Washington,1988.
6. Energy Management Handbook, W.C.Turner, Wiley, New York, 1982.
7. Technology Menu for Efficient energy use- Motor drive systems, Prepared by National
Productivity Council and Center for & Environmental Studies- Princeton Univ, 1993.
207
5. Report on different protocols to regulate global warming
6. Visit report- Refrigeration establishment like Cold storage plant or ice plant
7. Steady state Simulation of VCR system with developed code or any analytical software
References
1. Refrigeration and air-conditioning – C P Arora, TMH
2. Principles of refrigeration – R J Dossat, Willey Eastern Publication
3. Refrigeration and air-conditioning – W F Stoker and J W Jones, TMH
4. Refrigeration and air-conditioning- Manohar Prasad, New Age Int (P) Ltd.
5. Basic Refrigeration and air-conditioning- P.Ananthanarayana, TMH
6. ASHRAE Handbook of Fundamentals
7. ASHRAE Handbook of Systems
8. ASHRAE Handbook of Equipment
9. ISHRAE Air Conditioning Handbook
208
2. Write codes for, at least one each, 1-d and 2-d steady conduction with and without source
and do the post processing to verify with analytical results
3. Write codes, at least one, for steady, 2-d conduction-advection problems and do the post
processing to verify with analytical results
References
1. An introduction to computational fluid dynamics-The finite volume method, Versteeg.H.K.
, Malalasekera.W., Prentice Hall
2. Computational Fluid Mechanics and Heat Transfer, Anderson, D.A., Tannehill, I.I., and
Pletcher, R.H., Hemishphere Publishing Corporation, New York, USA, 1984.
3. Introduction to Computational Fluid Dynamics, Niyogi P. ,Laha M.K., Chakrabarty S.K.,
Pearson Education, India.
4. Computational Fluid Flow and Heat Transfer, Muralidhar, K.,andSundararajan,T., Narosa
Publishing House ,New Delhi1995.
5. Computer Simulation of flow and heat transfer, Ghoshdasdidar, P. S., Tata McGraw-Hill
Publishing Company Ltd., 1998.
6. Finite Element Programming of the Navier Stock Equation, Taylor, C and Hughes J.B.,
Pineridge Press Ltd.U.K.1981.
7. Computational Techniques for Fluid Dynamics: Fundamental and General Techniques,
Fletcher, C.A.J., Springer-Verlag, 1987.
8. Numerical Fluid Dynamics, Bose, T. K., Narosa Publishing House, 1997.
الهذف
.ِخٛ ِٕظٟبه آالد االؽزواق ٌٍؼًّ ف١ افزٚ ُ١ّٓ اٌطبٌت ِٓ رظ١رّى
هطلىثبد سبثمخ
. آالد االؽزواق
هفرداد الومرر
ٍِٟبد ِؾووبد االؽزواق اٌلافٛ ِٕظ
ِٟبد ِؾووبد االؽزواق اٌقبهعٛ ِٕظ
)Combined Cycles( ً اٌّلِظ١ِبد االؽزواق ماد اٌزشغٛ ِٕظ
209
.ٓ١غٌٙالد ا٢ا
الكتبة الوٌهجي
R.K. Rajput, A Text Book of Power Plant Engineering, Laxmi Publication
Skrotzki, Vopat, Power Station Engineering and Economy, Tata McGraw Hill.
210
9. Power station Engineering and Economy by Bernhardt G.A. Skrotzki and William A.
Vopat, Tata Mc Graw Hill Publishing Campany Ltd., New Delhi
10. Nuclear Energy An Introduction to the Concepts, Systems and Applications of Nuclear
Processes, 6th Edition, Raymond L Murray, , ELSEVIER
11. Power Plant Engineering, Manoj Kumar Gupta, PHI Learning
12. Nuclear Power Plant Engineering, James Rust, Haralson Publishing Company
13. Nuclear Power Plants, Edited by Soon Heung Chang, InTech Publishers, 2012
14. Nuclear Power Plants, Geotge Petridis and DimitriosNicolau, NOVA Publishers
211
2. Refrigeration and air-conditioning – W F Stoker and J W Jones, TMH
3. Modern Air-conditioning practice – C P Arora, TMH
4. Refrigeration and air-conditioning- Manohar Prasad, New Age Int (P) Ltd.
5. Basic Refrigeration and air-conditioning- P.Ananthanarayana, TMH
6. ASHRAE Handbook of Fundamentals
7. ASHRAE Handbook of Systems
8. ASHRAE Handbook of Equipment
9. ISHRAE Air Conditioning Handbook
212
2. Solar Energy: Principles of Thermal Collection and Storage by S,P Sukhatme, Tata
McGraw Hill
3. Solar Engineering of Thermal processes, J.A.Duffie and W.A.Beckman, 2ndedition, John
Wiley, New York, 1991.
4. Fuel Cells by Bockris and Srinivasan; McGraw Hill.
5. Solar Energy: Fundamentals and Applications by H.P. Garg& Jai Prakash, Tata McGraw
Hill.
6. Wind Power Technology, Joshua Earnest, PHI Learning, 2014
7. Non Conventional Energy Resources by S. Hasan Saeed and D. K. Sharma, S. K. Kataria&
Sons.
8. Renewable Energy Sources, J W Twidell& Anthony D. Weir. ELBS Pub.
9. Energy Conversion Systems, R D Begamudre, New Age International (P) Ltd., Publishers,
New Delhi ,2000.
10. Principles of Solar Engineering, D.Y.Goswami, F.Kreith and J.F.Kreider, Taylor and
Francis, Philadelphia, 2000.
11. Solar Photovoltaics: Fundamentals, Technologies and Applications, C S Solanki, 2nd
Edition, PHI Learning, 2013
12. Biomass Regenerable Energy, D. D. Hall and R. P. Grover, John Wiley, New York,1987.
13. Wind and Solar Power Systems, Mukund R Patel, CRC Press, 1999.
14. Wind Energy Explained: Theory, Design and Application, J F Manwell, J.C.McGowan,
A.L.Rogers, John Wiley and Sons, May 2002.
15. Magneto Hydrodynamics by Kuliovsky and Lyubimov, Addison.
هفرداد الومرر
ِٟٓ اٌظٕبػ٤اٚ ًّئخ اٌؼ١طؾخ ثٚ خ١ٌّٕٙاٌظؾخ اٚ اٌَالِخ
ئبد اٌؼًّ اٌّقزٍفخ١ ثٚ خ١ئخ اٌظٕبػ١إكاهح اٌج
بِٙؼبٌغزٚ خ١إكاهح اٌّقٍفبد اٌظٕبػٚ اٌّقٍفبد اٌظٍجخٚ اٌّقٍفبد اٌقطوح
)صبدٌٍّٛ اٝاٌزؾىُ فٚ اءٌٛٙكح اُٛ ع١١رمٚ ف١طٛاء ( رٌٛٙس اٍٛر
اٌّقٍفبد اٌَبئٍخٚ ٖب١ٌّإكاهح ا
.ٟغ١س اٌؼغٍٛاٌزٚ ٟشؼبػ٦س اٍٛاٌزٚ َٟ١ِغٕطٚوٙس اٌىٍٛاٌز
.خ١ٍػبد اٌَّزمجٚ ٌٍّشوٟئ١صو اٌج٤ُ ا١١رمٚ خ١ئ١كاهح اٌج٦ا
.ٟئ١ؾ اٌج١اٌزقط
213
Elective Courses (Power)
Project Management
Pre-requisites:
Objectives:
1. To familiarize the students with the use of a structured methodology/approach for each and
every unique project undertaken, including utilizing project management concepts, tools and
techniques.
2. To apprise the students with the project management lifecycle and make them
knowledgeable about the various phases from project initiation through closure.
Course Description:
Project Management Foundations
Definition of project management, project manager and project. Project types, project phases
and knowledge areas.
Initiating Projects
How to get a project started; Your project sponsor and creating charter; The project team and
team dynamics; running meetings
Planning Projects
Project estimating and scheduling techniques. PERT, CPM, GANTT chart. Introduction to
any one project scheduling software.
Planning Projects
Risk planning methods; Cost planning; Communication plan and Final project plan.
Executing Projects
Team management; communicating and engaging with all stakeholders of the projects.
Controlling Projects
Earned Value Management techniques for measuring your work completed; Using milestones
for measurement; change requests and scope creep. Keeping up with the project, Updating
the project, Project Issues management and Dealing with troubled projects.
Closing the Project
Customer acceptance; completing a final report; doing a lessons learned analysis;
acknowledging successes and failures; Project management templates and other resources;
Managing without authority; Areas of further study.
References
1. Project Management and Control,Narendra Singh; Himalaya Publishing House
2. Preparation, Appraisal, Budgeting, Implementing and Review, Prasanna Chandra TMGH
3. Project Management: A managerial approach, Jack Meredith & Samuel Mantel, Wiley
India, 7th Ed.
4. Project Management, Dennis Lock, Gower Publishing England, 9th Ed.
5. Project Management, Gido Clements & Cengage Learning.
6. Project Management, Gopalan, Wiley India
7. Projects- Planning, Analysis, Selection, Financing, Implementation and Review, Prasanna
Chandra, TMGH
214
2. Study emission measurement and control techniques
Course Description:
Air Pollution due to Automobile Exhaust: Exhaust gas constituents & analysis, Ingredients
responsible for air pollution, Harmful effects of various ingredients on plant ecology &
human life. Pollution Norms: European pollution norms, Indian pollution norms as per
Central Motor Vehicle Rules (C.M.V.R.).
Sources of Emission: Air Pollution due to engine exhaust, Emission from petrol tank &
carburetor, crankcase blow-by. Effect of valve timing, ignition timing, Combustion chamber
design, Fuel injection, fuel composition, air fuel ratio, mechanical condition of engine
components and driving mode.
Smoke: Smoke problems, types of smoke, factors affecting diesel smoke, odor, Smog
formation. Exhaust Emission Control: Basic method of emission control, catalytic
converter, After burners, reactor manifold, air injection, crank case emission control,
evaporative loss control, Exhaust gas recirculation, Fuel additives.
Control Techniques for SI and CI: Design changes, optimization of operating factors,
exhaust gas re-circulation, fumigation and air injector PCV system-Exhaust treatment in SI
engines - Thermal reactors, Catalysts, Uses of unleaded petrol.
Alternative Fuels: CNG, LPG, Bio-Diesel, Hydrogen, fuel cells, Eco-friendly vehicles,
Electric & Solar operated vehicle.
Instrumentation for Exhaust Emission Measurement: Measurement procedure, Sampling
Methods, Orsat Apparatus, Infrared Gas analyzer, Flame Ionization Detector (FID), Gas
chromatograph, Smoke meters.
List of Experiments
1. Study of Emission Norms
2. Measurement of emission by portable exhaust gas analyzer.
3. Measurement of emission by Infra Red Gas Analyzer (IRGA)
4. Measurement of smoke by Bosch smoke meter
5. Measurement of smoke by Hartridge smoke meter
6. Study of Exhaust Gas Recirculation (EGR)
7. Study of Evaporative Loss Control Device (ELCD)
8. Study of catalytic converter
9. Analysis of exhaust gas using Orsat Apparatus
10. Study of LPG / CNG Kit
References
1. Internal Combustion Engine and Air Pollution, E.F. Oberts, Row Publisher, NY
2. Vehicle Operation & Testing: Automotive Vehicle Technology Vol. 7, J.G. Giles
3. Carburetion, Vol. 4, C.H. Fisher
4. Carburetion and Fuel Injection System: Motor Manual, Vol. 2, A.W. Judge, TheCaton Pub.
Co. Ltd., London
5. Environmental engineering, C J Rao, New Age Publishers
6. Environmental studies, D L Manjunath, Pearson
7. Instrumental Method of Analysis, H.H. Willard and Others, CBS Publishers &
Distributors, Delhi.
8. Automobile Engineering, G.B.S. Narang, CBS Publishers & Distributors, Delhi
9. Electronics & Instrumentation Handbook, Gupta B. R., Wheeler Publishing
10. Light & Heavy Vehical technology, M. J. Nunney, Elsevier
Piping Engineering
Pre-requisites:
215
Objectives:
1. Study fundamental, codes and standards of piping systems
2. Study piping layout and drawings
3. Study basic loading conditions and failure nodes
Course Description:
Introduction to Piping: Introduction to phases of plant design, Role of Piping within project
plan. Design Philosophy, Process data sheets, Process flow diagram, Piping &
Instrumentation diagrams, and Equipment layout. Interdisciplinary inputs/coordination.
Piping fundamentals: Piping elements (pipes, fittings, flanges, gasket, bolting, Valves), Pipe
schedule, Pipe thickness calculations, pipe fittings (bends, elbow, Tees, Reducers, Stub ends,
cross), Special pipe fittings, expansion joints, types of flanges, pressure temperature rating for
flanges.
Piping Codes & Standards American Standards, Indian standards, British Standards for
Piping Engineering. Selection of Design code. Unified numbering system (UNS).
Piping materials : ASME, ASTM , IS materials for piping components such as pipe, fittings,
flanges, bolting, supports, expansion joints, valves etc. Selection of materials.
Piping Drawing Piping symbols, orthographic (Plan & Elevation) drawings.
Plot Plan, Equipment Layout & Piping GA Drawings: Plot Plan Development &
Requirements (General guidelines) Equipment Layout Terminology, Control Point & Battery
Limits. Preparation of Equipment Layout. Piping GA Drawing Requirements and Layout
Procedure. Pump GA Drawing and Layout Consideration.
Piping supports Fixed supports like Rest. Line guide, Line stop, Hold down, Rigid strut etc.,
Flexible supports like variable spring support, constant spring support, Snubber etc.
Piping Stress Analysis : Need of Stress Analysis, Procedure to carry out stress analysis,
Loads on the piping system(such as sustained , thermal, hydro-test loads, water hammer,
relief valve outlet), Allowable stress, Flexibility analysis, thermal load calculations, critical
line list preparation , Steps involve in stress analysis of piping system, Pipe support.
List of Experiments
1. Draw Piping Symbols.
2. Draw General Arrangement for Plant Layout.
3. Draw Orthographic drawing of any 5 piping systems
References
1. Piping Handbook, Mohinder L. Nayyar, McGraw-Hill Publication
2. Piping Design Handbook, Macetta John, M. Dekker , 1992
3. ASME code for Process Piping ,ASME B31.1
4. ASME code for Process Piping , ASME B31.3
5. ASME B16.5 , Pipe ,Flanges & Flange Fittings
6. An International Code 2007 ASME Boiler & Pressure Vessel Code, Rules For
Construction of Pressure Vessels, Section II A, B, C & D
Aerodynamics
:األهذاف
.ْوا١ اٌطٟب فٙمبر١ رطجٚ اءٌٛٙخ ا١ِٕب٠ ِغبي كٌٝخ إ١ى١ٔىب١ٌّٕلٍخ اٌٙاٌزملَ ثطبٌت ا
هطلىثبد سبثمخ
ائغٌّٛىب ا١ٔىب١ِ
.خ اٌغبى١ِٕب٠ ك
216
هفرداد الومرر
ًٍبئً اٌؾٚ ٚ ٌوٍٛز-و١ ِؼبكالد ٔبف
خ٠ اٌطجمخ اٌغلاه
ػبلخ٦ ا
اٌوفغ
.هٌّٛ ّٔنعخ ا
اٌظلِخ اٌّبئٍخٚ ٟ اٌقبهعٟٔؼغبؽ٦بْ ا٠ اٌَو
.مبد١ رطج
الكتبة الوٌهجي
2111 ،َٛ ِطجؼخ عبِؼخ اٌقوؽ،ائغٌّٛىب ا١ٔىب١ِ ،ك٠ دمحم ٘بشُ طل
Massey, Mechanics of Fluids, Van Rheinhold
Energy management
Pre-requisites:
Objectives:
1. Study principles of energy management
2. Study energy economics and auditing
3. Study electrical energy management, cogeneration and waste heat recovery
Course Description:
General Aspects of Energy Management:
Current energy scenario: Current energy consumption pattern in global industry, Principles
of Energy management, Energy policy, Energy action planning, Energy security and
reliability, Energy and environment, Need of Renewable and energy efficiency.
Energy Auditing: Need of Energy Audit, Types of energy audit, Components of energy
audit, Energy audit methodology, Instruments, equipment used in energy audit, Analysis and
recommendations of energy audit - examples for different applications, Energy audit
reporting, Energy audit software.
Energy Economics: Costing of Utilities - Determination of cost of steam, natural gas,
compressed air and electricity.
Financial Analysis Techniques - Simple payback, Time value of money, Net Present Value
(NPV), Return on Investment (ROI), Internal Rate of Return (IRR), Risk and Sensitivity
analysis.
Energy Efficiency in Thermal Utilities: Energy performance assessment and efficiency
improvement of Boilers, Furnaces, Heat exchangers, Fans and blowers, pumps, Compressors
and HVAC systems. Assessment of steam distribution losses, Steam leakages, Steam
trapping, Condensate and flash steam recovery system
Electrical Energy Management and Lighting: Distribution and transformer losses. Electrical
motors - types, efficiency and selection. Speed control, Energy efficient motors. Electricity
Act 2003.
Lighting - Lamp types and their features, recommended illumination levels, lighting system
energy efficiency.
Cogeneration and Waste Heat Recovery, Cogeneration- Need, applications, advantages,
classification, the cogeneration design process.
Waste heat recovery- Classification and application, Potential for waste-heat recovery in
Industry, Commercial WHR devices, saving potential. CDM projects and carbon credit
calculations.
List of Experiments
1. Energy audit of a small scale industry/institute and submit report with recommendation.
217
2. Energy audit of HVAC or Compressed air or Boiler and steam system and submit report
with recommendations.
3. Carry out the Energy audit of Electrical system.
4. Electrical tariff calculations
5. Visit to cogeneration or waste heat recovery plant and submit a report
References
1. Energy engineering and management, AmlanChakrabarti, PHI Learning, New Delhi 2012
2. Handbook of Energy Audit, Albert Thumann P.E. CEM, William J. Younger CEM, The
Fairmont Press Inc., 7th Edition.
3. Energy management Handbook, 5th Edition, Wayne C. Turner, The Fairmont Press Inc.,
Georgia.
4. Handbook on Energy Audit and Environment management, Abbi Y. A., Jain Shashank,
TERI, New Delhi, 2006
5. Energy Performance assessment for equipment and Utility Systems Vol. 1 to 4, Bureau of
Energy Efficiency, Govt. of India
6. General Aspects of Energy Management and Energy Audit, Bureau of Energy Efficiency,
Govt of India
7. Boiler Operators Guide Fourth Edition, Anthony L Kohan, McGraw Hill
8. Energy Hand book, Second edition, Von Nostrand Reinhold Company - Robert L.
Loftness.
9. Sustainable Energy Management, MirjanaGolusin, SinisaDodic, Stevan Popov, Academic
Press
10. Trivedi P R, Jolka K R, Energy Management, Commonwelth Publications, New Delhi
Fluids Engineering
:األهذاف
.ْكاٌَٛ اٟخ ف١مبد اٌظٕبػ١ائغ ثبٌزطجٌّٛهثؾ ِموهاد ا
هطلىثبد سبثمخ
ائغٌّٛىب ا١ٔىب١ِ
ائغٌّٛ آالد ا
هفرداد الومرر
ٔظُ اٌؼـ
ت١ٔبث٤ؽ اٛىب فط١ٌٚله٠ ٘ب
اٌّؼيىاد
ُ١ّ أِضٍخ اٌزظ
.خ١ اٌؼبثواد اٌؼغط
الوعول
.ت١مط ٌقؾ أٔبثّٛٔ أٟافزجبه ٌّؼقبد ِؼيىح ف
الكتبة الوٌهجي
2111 ،َٛ ِطجؼخ عبِؼخ اٌقوؽ،ائغٌّٛىب ا١ٔىب١ِ ،ك٠ دمحم ٘بشُ طل
Massey, Mechanics of Fluids, Van Rheinhold
218
219