Professional Documents
Culture Documents
Day Night Switch 1000watts Circuit
Day Night Switch 1000watts Circuit
2
Savetron’s Automatic Day Night Detector
1. Description:
Savetron’s Automatic Day Night Detector is a product to control
the load based on Sunlight.
It gives a good experience by turn ON and OFF the Load automatically
when it needs.
It senses Sunlight (Day and Night) using an intelligent sensor.
It turns on the Load when Night (No sunlight detected) and turns off the
Load when Day (Sunlight detected).
2. Application:
Street lights
Outdoor lights
Advertisement Board lights
Highways Board lights
Garden lights
Parking lights
Park lights
Play ground and Stadium lights
Hospital lights
Airport lights
School and College lights
3
3. Features:
It sense only IR emitted light like Sun light, Sodium light and IR
Sensing light intensity adjustable by user
Can support up to 1000W resistive load and 500W inductive load
There are two models
1. Waterproof enclosure IP65 ABS Plastic
2. Without Waterproof enclosure
Easy to installation
4. Specification:
4
5. Package included:
1 x Savetron’s Automatic Day Night Detector
6. Note:
Make sure you connect the wires properly.
Should not install under Sodium lamp, Incandescent lamp and IR
emitter light
Should install above Sodium lamp, Incandescent lamp and IR
emitter light
5
7. Product Preview:
Sunlight Sensor
Top Cap
Screws
Screws
8. Circuit Preview:
Phase
P N 230 V AC 7A
230 V AC
INPUT Neutral
7
After Turn ON the Main MCB, Don’t Touch anywhere in the circuit
Now check output manually
Adjust Sunlight Sensitivity using POT with the help of Tester /
Screw Driver
Insert Screws and Fix Top Cap of product properly
11. Abbreviation:
V : Voltage
A : Ampere
W : Watt
P : Phase
N : Neutral
Hz : Hertz
DC : Direct Current
AC : Alternating Current
NO : Normally Open
NC : Normally Close
mm : Millimeter
MCB : Miniature Circuit Breaker
IR : Infrared
ABS : Acrylonitrile Butadiene Styrene
POT : Potentiometer