Professional Documents
Culture Documents
7 CHERY
The lay-by pins are placed in the lower part of the ECU.
https://ecu.design
BOSCH ME7.9.7 CHERY
DIRECT CONNECTION
In order to connect to the ECU use the CABLE F32GN037C/D.
Make sure that the POWER led (red) on Trasdata is ON.
https://ecu.design
BOSCH ME7.9.7 CHERY
ECU CONNECTOR
BOOT CONNECTION
Connect the GREY wire of the cable F32GN037C/D as described here below :
https://ecu.design