Professional Documents
Culture Documents
第 1 页 共 45 页
About This User Guide
Pls read all the content of the user guide carefully to use the products safely and effectively.
You are advised of keeping it properly for your using reference.
Disclaimer
Please do not dismantle the product or tear up the seal on it, otherwise we won’t provide
warranty or replacement service.
The pictures in this user guide are for reference only. If there are any pictures which not
match the actual product, please take actual products as the standard. Updated information
is subject to change without notice.
All information contained in this guide are protected by copyright, and our company
reserves all rights. All or part of this guide is prohibited to excerpt, copy, bundle other
products, or sell without the written permission from us.
Version Record
第 1 页 共 22 页
EP5000
EP3000
1.3.2 dimension(mm)
EP3000
第 2 页 共 22 页
EP5000
第 3 页 共 22 页
Pin
Signal Name I/O Note
Number
1 USB_D- I/O USB bus minus
2 NC - disable
3 NC - disable
4 GND IN Ground cathode voltage
5 NC - disable
6 USB_D+ I/O USB bus plus
7 USBVBUS IN USB voltage +5V anode voltage
TXD-Wiegan
8 OUT 3.3V TTL、RS232、RS485A+、Wiegand 1
d
9 NC - disable
RXD-Wiegan 3.3V TTL compatible with 5V input、RS232、
10 OUT
d RS485B-、Wiegand 0
第 4 页 共 22 页
1.5 Start-up, shutdown, standby and restart
Start-up:Connect host computer with scanner, which will automatically start-up and in
working state.
Shutdown:Remove the data cable which is connected with scanner; remove the USB which
is connected with host computer; remove the power adapter which is inserted into RS-232
serial port.
Standby:Scanner with automatic sleep standby function, if 30 minutes without work it will be
in standby mode, but it will automatically start-up when barcode approach.
Restart:If the scanner crashes or doesn't respond, please switch it off and restart.
1.6 Maintenance
* The window must be kept clean, the supplier do not bear the guarantee responsibility due
* Clean the window with a soft cloth, such as lens cleaning cloth
第 5 页 共 22 页
2、Barcode Menu
This model of laser desktop barcode scanner is designed to change settings by reading some special
barcode, which we will give you a detailed introduction and show you all the barcodes for the
The greatest advantage of this setting method is direct, intelligible and user friendly.
Barcode
Configuration Code Turn on(default) Setting of Function
第 6 页 共 27 页
product batch version
You can restore the menu settings for the user-defined menu settings.
第 7 页 共 27 页
26 bit(default)
34 bit
2.2.8 Serial port data bits, stop bits, check bit setting
第 8 页 共 27 页
7 data bits,1 stop bit,odd-parity
check
第 9 页 共 27 页
8 data bits,2 stop bits,odd-parity
check
2.10 Code ID
output
edit
User-defined CODE ID
(After scan this code you can set the prefix you
want based on the data and barcode in table ID)
第 10 页 共 27页
2.11 AIM ID setting
Cancel Prefix
Add STX
2.2.13 Suffix Setting
Cancel Suffix
Add Enter
Add Tab
第 11 页 共 27页
Add ETX
English output(default)
Chinese output(TXT/excel)
Chinese output(Word)
In order to make sure the invoice output correctly, when you use invoice function please set Chinese
Special invoice(default)
plain invoice
2.2.17 inverse code option
(Only 1D/DataMatrix/Aztec)
第 12 页 共 27页
Only decode inverse code
Mode 2: All characters between 0x20 and 0xFF are output using the virtual keyboard mode. Characters
between 0x00 and 0x1F are output according to the control characters (see Appendix).
Mode 3: The characters used between 0x00 and 0xFF are output using the virtual keyboard mode.
W INDOW S( default)
MAC OS
第 13 页 共 27页
LINUX
Volume low
Shut do wn s tartup be ep
Low pitch
第 14 页 共 27页
High pitch
Tone pip
第 15 页 共 27页
Normal mode
LED alwa ys on
500ms
750ms(default)
1s
2s
500ms 600ms
第 16 页 共 27页
800ms 1s
2s 5s
10s
第 17 页 共 27页
Only 0A(LF) line feed
Normal output(default)
Case reversal
all Caps
French (France)
Italian (Italy)
第 18 页 共 27页
Italian 142 (Italy)
German (Germany)
Spanish (Spain)
Greek (MS)
Finnish
Japanese
Russian (MS)
Russian (typewriter)
Arabic (101)
Irish
Polish (214)
第 19 页 共 27页
Polish (Programmers)
Dutch (Netherlands)
Czech (QWERTZ)
Portuguese (Portugal)
Portuguese (Brazil)
Swedish (Sweden)
Turkish Q
Turkish F
Greek (MS)
French (Belgium)
2.8 Symbologies
第 20 页 共 27页
2.8.1 enable/disable all symbologies
Enable all barcode might slo w do wn scann er
decode speed. W e suggest enable the ba rc ode you need based on your scene .
Enable all barcode is default
2.8.2 Codabar
Enable Codabar
Disable Codabar
Enable Code 39
第 21 页 共 27页
Disable Code 39
2.8.6 Code 39 check bit
Enable Code 32
Disable Code 32
第 22 页 共 27页
Enable ITF25
Disable ITF25
第 23 页 共 27页
ITF25 Fixed Length of 18 Digits
Enable Industrial 2 of 5
Disable Industrial 2 of 5
2.8.15 Industrial 2 of 5 Limitation of length
第 24 页 共 27页
2.8.16 Matrix 2 of 5(4-24)
Enable Matrix 2 of 5
Disable Matrix 2 of 5
Enable Code 93
Disable Code 93
2.8.19 Code 93 Limitation of length
第 25 页 共 27页
Code 128 min length(0~50 bits)
)
Enable GS1-128
Disable GS1-128
2.8.24 UPC-A
Enable UPC-A
Disable UPC-A
2.8.25 UPC-A check bit
第 26 页 共 27页
Enable UPC-A to EAN-13
Enable UPC-E
Disable UPC-E
2.8.28 UPC-E check bit
Enable EAN/JAN-8
Disable EAN/JAN-8
2.8.31 EAN/JAN-13
Enable EAN/JAN-13
第 27 页 共 27页
Disable EAN/JAN-13
第 28 页 共 27页
2.8.36 GS1 DataBar Limited
2.8.38 PDF417
Enable PDF417
Disable PDF417
2.8.39 QR Code
Enable QR
Disable QR
2.8.40 Micro QR
Enable Micro QR
Disable Micro QR
2.8.41 Data Matrix
第 29 页 共 27页
Enable Data Matrix
Enable Aztec
Disable Aztec
第 30 页 共 27页
Appendix 1 data and editing code
第 31 页 共 27页
Configuration Code Turn on
save
第 32 页 共 22 页
Configuration Code Turn on
Lighting circuit:
Beeper circuit:
第 33 页 共 22 页
Configuration Code Turn on
Indicator circuit:
第 34 页 共 22 页
Configuration Code Turn on
第 35 页 共 22 页
Configuration Code Turn on
第 36 页 共 22 页
Configuration Code Turn on
decimal hexadecimal Corresponding key value(disable CODE ID)Corresponding key value(enable CODE ID)
0 00 retain Ctrl+@
1 01 Insert Ctrl+A
2 02 Home Ctrl+B
3 03 End Ctrl+C
4 04 Delete Ctrl+D
5 05 PageUp Ctrl+E
6 06 PageDown Ctrl+F
7 07 ESC Ctrl+G
8 08 Backspace Backspace
9 09 Tab Tab
Enter(The configuration of CRLF processing
10 0A Ctrl+J
decide how it express )
11 0B Caps Lock Ctrl+K
12 0C Print Screen Ctrl+L
Enter ( The configuration of CRLF
13 0D Enter
processing decide how it express )
14 0E Scroll Lock Ctrl+N
15 0F Pause/Break Ctrl+O
16 10 F11 Ctrl+P
17 11 Direction key ↑ Ctrl+Q
18 12 Direction key ↓ Ctrl+R
19 13 Direction key ← Ctrl+S
20 14 Direction key → Ctrl+T
21 15 F12 Ctrl+U
22 16 F1 Ctrl+V
23 17 F2 Ctrl+W
24 18 F3 Ctrl+X
25 19 F4 Ctrl+Y
26 1A F5 Ctrl+Z
27 1B F6 ESC
28 1C F7 Ctrl+\
29 1D F8 Ctrl+]
30 1E F9 Ctrl+^
31 1F F10 Ctrl+_
第 37 页 共 22 页
Configuration Code Turn on
第 38 页 共 22 页
Configuration Code Turn on
第 39 页 共 22 页
Configuration Code Turn on
第 40 页 共 22 页