Professional Documents
Culture Documents
100+
Projects
Commissioned
Globally
200+
Years of
Cumulative
Experience
WATER
TREATMENT
REsiNs
sOFTENiNG
Thermax
Ion Exchange
Quality is Our
Resins
Commitment Thermax Chemicals
Chemical Division
spEciAlTy
QUALITY POLICY
REsiNs
Thermax
We at Thermax Limited, Chemical Division hereby commit to develop,
manufacture, deliver and apply Specialty Chemicals, Performance
Chemicals in Oil Field, Fuel and Water Management to meet customer
expectation.
Further, we are committed to comply with the requirements of ISO 9001
and continually improve the effectiveness of the Quality Management
System by establishing and reviewing quality objectives.
Ion Exchange
Quality is Our
We shall ensure that quality policy is communicated and understood by all
our employees. This policy shall be reviewed periodically for its continuing
Resins
Commitment Thermax Chemicals
Chemical Division
suitability.
QUALITY OBJECTIVES
ISO & OHSAS Certification NUclEAR FOOD
Our Quality Objectives: cATAlysis MiNiNG
1. To implement, maintain and continually improve Quality System as GRADE pROcEssiNG
per requirements of the Quality Standard of ISO 9001.
2. To achieve consistent Quality.
3. To enhance customer satisfaction.
4. To improve the effectiveness of existing processes.
5. To innovate products & processes to meet the customer needs.
Polystyrene Quarternary 42-45 Macroporous strong base Type Tanin removal from ground
A-72 Mp Strong Base Chloride 16-50 0.3-1.2 175/80 0-14 1.0 CI-ÒOH- 20 60±3 I anion exchange resin with water used for color removal
Copolymer Ammonium Type I 670-720 controlled pore size from sugar syrup.
Cross linked Amino methyl 45-50 HÒNa Special resin having more
Brine decalcification in chloro
cH-93 Chelating Sodium 16-50 0.3-1.2 175/80 0-14 2.0 50±3 pronounced affinity for Ca+& Mg
polystyrene phosphoric 720-760 35-40% alkali industries.
than IDA type resin
Polystyrene Quaternary 42-45 High porosity / High mechanical Removal of colloidal silica. Used
A 72 Mp (Hp) Strong Base Chloride 16-50 0.3-1.2 175/80 0-14 0.6 Cl-ÒOH- 20 70-75 strength macroporous strong in semiconductor, medical &
Copolymer Ammonium type I 670-720 base anion exchange resin pharmaceutical field
It is premium grade resin media
Chelating Polystyrene 42-45 designed to provide greater Removal of dissolved iron (Fe
IRR
T-iRR N/A N/A 16-50 0.3-1.2 175/80 0-14 N/A — 50±5 matrix porosity & excellent II) from potable water / ground
Resin Copolymer 680-720 catalytic properties to remove water.
iron from ground water.
Polystyrene 51-53 H+ ÒNa+ Macroporous cation exchange
T-4213 Mp Strong acid Sulphonic Hydrogen 16-40 0.4 - 1.2 250/120 0-14 1.7 50± 3 Sugar de-ashing
copolymer 810-850 10% max. resin
Weak base Cross linked Free base 40-44 FB
to Cl- High capacity macroporous weak Liquid glucose and sorbitol
A-2X Mp R Tertiary amine 16-40 0.4 - 1.2 175/80 0-9 1.6 47±3
anion polystyrene form 640-710 20% base anion exchange resin. application
SPECIAL GRADE ION EXCHANGE RESINS
screen Total exchange Backwash Moisture
stability Reversible
Matrix paricle size settled content
Tulsion® Type Functional group ionic form size Us Max Temp pH range capacity swelling Features Applications
structure mm (Min. 95%) Density %
Mesh 0
F / 0c (meg/ml.min) % Approx
lbs/cft g/l Approx
A-201 X MP Weak Base Polystyrene Tertiary amine Free Base 16-50 0.3-1.2 140/60 0-5 1.7 43-45 FB- CI 30 45±3 Premium
Macroporous
gradeWeak
resinBase Anion
for nitrate Used in chemical process of
Cross linked Quarternary 43-47 Selective removal of nitrate from
Copolymer 690-720 removal
resin food
with < grade
2% version
strong for
base separationwater
of acids
A-62Mp Strong Base Chloride 16-50 0.3-1.2 195/90 0-14 1.0 — 52±3 industrial andfrom salts.
domestic
polystyrene Ammonium 700-750 potable
capacity.water treatment is also drinking water
available
A-74 MP Weak Base Polystyrene Quaternary am- SO4 16-50 0.3-1.2 140/60 0-14 1 42-44 Cl-OH - 20 65±3 Used for regenerable mix beds High flow, deep bed condensate
(SO4)
A-23p Copolymer
Polystyrene monium Type 1
Quarternary 670-710
42-44 in condensate polishing units. Dissolved
polishing.oxygen removed for
Strong Base Sulfite 16-50 0.3-1.2 140/60 0-14 0.8 — — For disolved oxygen removal very low conductivity water
(sulphite) Copolymer Ammonium 670-710 This resin has high operating requirements.
capacity and low rinse require-
Cross linked Quarternary 43-47 ments.resin
This resin also exhibits Decolorization of aqueous
Acrylic with high organic
A-30 Mp Strong Base Chloride 16-50 0.3-1.2 140/60 0-14 0.7 — 67±3 better regeneration efficiency. solution, sugar melt
Polyacrylic Ammonium 700-750 removal capacity
Decolorization
A-630 Strong Base Polystyrene Quaternary am- Cl 16-40 0.4-1.2 175/80 0-14 0.65 42-44 NA 45±3 Porous strong base type I anion Multiple and mixed bed deioni-
Polystyrene Quarternary 42-45 Macroporous strong base Type Tanin removal from ground
Copolymer monium Type 1 670-710 exchange resin. Excellent physi- zation, silica removal.
A-72 Mp Strong Base Chloride 16-50 0.3-1.2 175/80 0-14 1.0 CI ÒOH 20
- -
60±3 I anion exchange resin with water used for color removal
Copolymer Ammonium Type I 670-720 cal and chemical
controlled pore size properties. from sugar syrup.
CH-920 GA Chelating Polystyrene Spe.Galium H 16-50 0.3-1.2 210/100 5-14 1.5 47-49 NA 12+3 Weak Acid Cation rein
Macroporous strong base Typewith spe- Used for recovery of of Gallium
Polystyrene
Copolymer Quarternary
Selective 42-45
750-790 cial legend attached to special Used
from for color
Bayer removal from
Liquor
A - 722 Mp Strong Base Chloride 16-50 0.4 -1.2 175/80 0-14 1.0 CI ÒOH- 20
-
60±3 I anion exchange resin with
Copolymer Ammonium Type I 670-720 ligand haveporehigher sugar syrup.
controlled size affinity to
Gallium in Bayer Liquor
Cross linked 52-54 Selective removal of fluoride Removal of flouride from
cH-87
TFR-93 Chelating
Weak Acid Polystyrene Flouride selective
phosphonic —
Al 16-50
16-50 0.3-1.2
0.3-1.2 140/60
210/100 7-11
7-11 —
2.3 45-47 NANa 45±3
42±3 capability
polystyrene 830-860 H- from waterof removing fluoride domestic
Used for selective
drinking removal
water. of
Cation Copolymer 720-760 +35 ions to the level as low as below Fluoride ions from aqueous
Polystyrene Imminodiacetic 45-50 HÒNa Special resin forfrom
selective Brine purification in chloro alkali
cH-90 Chelating Sodium 16-50 0.3-1.2 175/80 0-14 2.0 48±3 one ppm even high TDS solutions.
Copolymer acid 720-790 30 +/- 5% removal of transition metals industry.
feed water (>1000 PPM ).
Cross linked AminoSulphonic
methyl 45-50 Special resinCation
having more
T-202 Strong Acid Polystyrene Nuclear H 16-50 0.3-1.2 250/120 0-14 1.75 50-52 NaHÒNa
+
H7 53±3 Stron Acid Resin Suitable
Brine for Biodieselinpurifi-
decalcification chloro
cH-93 Chelating Sodium 16-50 0.3-1.2 175/80 0-14 2.0 50±3 pronounced affinity for Ca+& Mg
polystyrene
Copolymer phosphoric 720-760
800-840 35-40% alkali
cationindustries.
than IDA type resin
RCX-5143 WBA Polystyrene Quaternary Cl 16-50 0.3-1.2 175/80 0-9 1.2 42-44 FB-Cl 40±3 Weak Base anion resin with Recovery
Used of rhodium
for mercury indstrial
removal
Polystyrene
Copolymer Ammonium Type 1 47-50
670-710 Special
Rodiumresin for selective
slective funstional process effluent
cH-95 Chelating Isothiouronium Chloride 16-50 0.3-1.2 175/80 0-7 1.25 meq/ml — 50±3 from effluent in Chloro -alkali
Copolymer 760-800 removal
group of mercury
industry.
PCR-5320 SBA Polystyrene
Cross linked Quaternary Cl 16-50 0.3-1.2 175/80 0-14 0.6 43-47
42-45 NA 52±3 High organic
Selective removal
removal capacity
of mercury, Suitable of
Removal formercury
removalinperchlorate
Chloro -
cH-97
PFS Chelating Copolymer Methylene Type
Ammonium thiol 1 Chloride 16-50 0.3-1.2 140/60 0-14 150 mg Hg/l 710-730 NA 40±3 removal from ground water
polystyrene 670-720 regenerable resin alkali industry.
used for domestic use.
Cross linked 43-47 Removal of Boron from industrial
cH-99
CH-88 Chelating
Chelating Polystyrene Polyhydroxy amine
Nulcear Sulphonic Chloride
Al 16-50
16-50 0.3-1.2
0.3-1.2 175/80
210/100 7-11
5-14 0.8
1.8 47-49 NA
NA 45±2
43±3 Selective
Low EDC removal of Boron
fluoride selective Fluoride removal from potable
polystyrene 700-750 water.
Copolymer 750-790 chelating resin water
Polystyrene Quaternary 42-45 High porosity / High mechanical Removal of colloidal silica. Used
A 72 Mp (Hp) Strong Base Chloride 16-50 0.3-1.2 175/80 0-14 0.6 Cl-ÒOH- 20 70-75 strength macroporous strong in semiconductor, medical &
Copolymer Ammonium type I 670-720 base anion exchange resin pharmaceutical field
It is premium grade resin media
Chelating Polystyrene 42-45 designed to provide greater Removal of dissolved iron (Fe
T-iRR N/A N/A 16-50 0.3-1.2 175/80 0-14 N/A — 50±5 matrix porosity & excellent II) from potable water / ground
Resin Copolymer 680-720 catalytic properties to remove water.
iron from ground water.
Polystyrene 51-53 H+ ÒNa+ Macroporous cation exchange
T-4213 Mp Strong acid Sulphonic Hydrogen 16-40 0.4 - 1.2 250/120 0-14 1.7 50± 3 Sugar de-ashing
copolymer 810-850 10% max. resin
Weak base Cross linked Free base 40-44 FB to Cl- High capacity macroporous weak Liquid glucose and sorbitol
A COMMItMENt tO QUALItY
Every batch of Tulsion Ion Exchange resin is manufactured under carefully controlled process parameters and follows a rigorous quality
assurance protocol covering every raw material, intermediate stage products and all batches of the final product. All the engineers, operators
and scientists take great care in processing every batch of resin to ensure that the produced lot of resin meets the high standard of quality
that we specify and commit to the customer.
Every Tulsion Ion exchange resin product is developed by a team of experienced R&D scientists, manufactured by qualified production
engineers, inspected by ever cautious QAC chemists and commissioned by expert technical services group so that the customers can use
them without any hassles over a longer period of time. Sustainable Solutions in
Energy & Environment
We are proud to be a company that develops and supplies customer specific products with tailor made specifications on exclusive basis for
a variety of end applications.
Registered Office
We believe greatly in system oriented working style, safe working conditions as well as environmental safety. As an obvious result, Thermax’s Thermax Limited
chemical division manufacturing facility is certified for ISO 9001-2008, ISO 14001-2004 and OHSAS 18001-2007. D-13, MIDC Industrial Area,
R D Aga Road, Chinchwad,
tULSION® Ion exchange resins are available in standard packing size as follows: Pune 411019, India
Fibre Drums : 7 cft. The data included herein are based on test information obtained by Thermax. These Email: enquiry@thermaxglobal.com
Customer Care: 1800-209-0115
Polyethylene lined HDPE bags : 1 cft. data are believed to be reliable but do not imply any warranty or performance
Super Sacks : 40 cft. guarantee. We recommend that the users determine performance by testing on their
Polyethylene lined HDPE bags : 25 ltr. processing equipment.
Corporate Office
Super Sacks : 1000 ltrs. We assume no liability or responsibility for patent infringement resulting from the use Thermax House
MS Drum : 180 ltr. of any of our product. In view of our constant endeavor to improve the quality of our 14 Mumbai-Pune Road, Wakdewadi,
products, we reserve the right to alter or change specifications without prior notice. Pune 411 003
HDPE Drum : 200 ltr.
Phone: +91-20-66051200/ 25542122
+91-20-25541226
Head Office
Thermax Limited
Chemical Divison, Environment House,
90-92, BG Block, MIDC, Bhosari,
Pune - 411026, India.
Email: enquiry@thermaxglobal.com
Phone: +91 20 6715 6000
www.thermaxglobal.com